Texas Instruments

OPA251UA - 15V MicroPower Rail-to-Rail Op Amp | Texas Instruments

MPN: OPA251UA ✓ Nakahanda
Single supply Vdss 25 uA Id 8-pin SOIC Package
MOQ: 1 |

OPA251UA Ulas

The Texas Instruments OPA251UA is a single-amplifier, rail-to-rail-output operational amplifier designed for single-supply, low-power systems. It operates from a 15 V maximum supply, consumes approximately 25 uA of quiescent current, and is offered in an 8-pin SOIC package. The device also supports low-offset operation, high common-mode rejection, and high open-loop gain, making it suitable for portable instrumentation, sensor interfaces, and low-current analog signal-conditioning circuits.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. Within the product hierarchy, the OPA251UA is a voltage-feedback operational amplifier, a general-purpose amplifier IC, and a member of the wider power-management and analog signal-processing category. Rail-to-rail output swing allows the output to approach the supply rails more closely than a conventional non-rail-to-rail output stage, which is useful when a downstream circuit must operate over most of the available supply voltage.

The OPA251 family is specifically designed for battery-powered and portable applications. Its approximately 25 uA quiescent current reduces the standing power requirement of continuously powered systems. The OPA251UA combines that low-power behavior with rail-to-rail output, low offset voltage, high common-mode rejection, and high open-loop gain. These characteristics support accurate amplification of small signals while helping reduce supply-related errors and limiting current consumption in battery-operated equipment.

The OPA251UA is a single op amp in an 8-pin SOIC package, allowing a direct replacement path from the multi-amplifier OPA2251 and OPA4251 families when only one amplifier channel is required. Its approximately 35 kHz gain-bandwidth behavior, as identified in the product listing, is appropriate for low-frequency signal conditioning rather than high-speed waveform or video amplification. Users should select an amplifier with wider bandwidth when slew rate, settling time, or high-frequency signal fidelity are the dominant requirements.

Typical uses include low-power sensor conditioning, portable measurement equipment, battery-operated monitors, audio and communication interfaces, and low-current analog control systems. The device can amplify signals from low-frequency transducers while its low quiescent current helps preserve battery life. Rail-to-rail output also increases usable output range, although input common-mode limits, output swing under load, noise, and offset must still be checked against the signal chain requirements.

For a new single-supply design, place the decoupling capacitor close to the supply pins and route the feedback network to minimize parasitic pickup. Do not assume rail-to-rail output means the output can reach either rail exactly; check the datasheet output-swing conditions and the load current. If the selected manufacturer documentation does not specify exact pin names or limits, use the OPA251 data sheet as the controlling design reference.

This page organizes the OPA251UA product identity, package information, technical gaps, sourcing workflow, and engineering considerations into one practical reference. It is intended to help designers confirm device suitability, plan the PCB footprint, and identify the technical parameters that must be verified before production release.

Mga alternatibo na pwedeng ilagay na OPA251UA — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

OPA251UA Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Single general-purpose operational amplifier
Number of Channels 1 channel
Supply Type Single supply
Maximum Supply Voltage 15 V
Kuru-kuryente ng Kapayapaan 25 uA
Gain-Bandwidth Product 35 kHz
Output Swing Rail-to-rail
Hanay ng Temperature na Operasyon -40 C to 85 C
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount
Lead-Free Status Lead-free
Tindminan RoHS RoHS-compliant

Gabay sa Pin Configuration ng OPA251UA 8-pin soic

Pin configuration para sa OPA251UA (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin soic package para sa OPA251UA

Wala ng detalyadong pinout data na magagamit para sa OPA251UA.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

OPA251UA ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Signal Conditioning, Portable Medical Monitoring, Industrial Sensor Interface, Portable Measurement Instrument, Battery-Operated Communications Interface, Low-Power Audio Interface.

🧩

Battery-Powered Sensor Signal Conditioning

The OPA251UA fits low-power sensor signal conditioning because its approximately 25 uA quiescent current limits standing consumption while its rail-to-rail output provides useful range in a compact low-voltage system. Place the amplifier close to the sensor output and use the manufacturer's recommended bypass capacitor at the supply pins. The approximately 35 kHz gain-bandwidth product is suitable for slow sensor signals, although offset accuracy, input common-mode range, and output swing must be checked against the transducer's operating range.

💊

Portable Medical Monitoring

The OPA251UA is suitable for low-frequency instrumentation in portable monitoring equipment where a 15 V maximum single supply and approximately 25 uA quiescent current are useful constraints. It can condition a transducer output before conversion or control circuitry, with rail-to-rail output allowing a wider usable signal span than a conventional output stage. For patient-connected designs, complete electrical isolation, leakage, protection, and regulatory validation remain system-level requirements and must not be inferred from the amplifier status.

🏭

Industrial Sensor Interface

The OPA251UA can amplify low-bandwidth industrial sensor signals in a 24 V-derived control system after suitable voltage conditioning reduces the supply to the amplifier's permitted range. Its rail-to-rail output and low offset characteristics are useful when the downstream converter accepts a near-supply-range input. Keep the amplifier outside the high-energy sensor wiring path or add appropriate protection, and verify common-mode limits because industrial transducers may exceed the OPA251 input range even when their signal frequency is low.

📱

Portable Measurement Instrument

The OPA251UA supports portable measurement instruments that combine a low-level analog input with restricted power budgets. Approximately 25 uA quiescent current helps limit amplifier overhead, while the single-amplifier 8-pin SOIC format avoids allocating a multi-channel package when only one conditioning channel is needed. Its approximately 35 kHz gain-bandwidth product accommodates slow process variables and sensor outputs, but the front end must remain within the input common-mode range and account for offset and noise during calibration.

🌐

Battery-Operated Communications Interface

The OPA251UA can support low-frequency communications-interface signal paths in battery-operated equipment when channel bandwidth remains modest. Rail-to-rail output helps use the available supply range, and the low quiescent current is valuable when the interface remains enabled continuously. Keep the amplifier outside high-speed RF paths because the approximately 35 kHz gain-bandwidth product is not intended for wideband carrier processing. Confirm that coupling, filtering, and level-shift requirements preserve the amplifier's common-mode and output-swing limits.

🎧

Low-Power Audio Interface

The OPA251UA can support low-frequency audio buffering, monitoring, or auxiliary interface circuits where a micro-power amplifier is preferred. Its approximately 25 uA quiescent current and rail-to-rail output suit compact battery-powered products, while low offset and high common-mode rejection help preserve small signals. The approximately 35 kHz gain-bandwidth product limits how much high-frequency audio content the stage can amplify cleanly, so this device is better suited to monitoring and control paths than full-bandwidth line outputs.

What is the OPA251UA?
The OPA251UA is a single, general-purpose operational amplifier from Texas Instruments intended for low-power, single-supply analog systems. It provides rail-to-rail output swing, approximately 25 uA quiescent current, and low offset voltage in an 8-pin SOIC package. According to the Texas Instruments OPA251 product information, the family is designed for battery-powered and portable applications where low standing current and useful output range are important.
What is the maximum supply voltage of the OPA251UA?
The OPA251UA supports a maximum supply voltage of 15 V. According to the Texas Instruments OPA251 product page, it is a single-supply micro-power operational amplifier. This rating defines the absolute upper limit of the device and should not be confused with the recommended operating range. Designers must also account for transient margin, supply tolerance, and input or output limits when constructing the system power rail.
Why does the OPA251UA have low quiescent current?
The OPA251UA consumes approximately 25 uA of quiescent current because its internal bias and output stages are designed for low-power operation. According to the Texas Instruments OPA251 family description, this characteristic supports battery-powered and portable equipment. The low standing consumption is especially useful when the amplifier remains powered continuously, although total current should include output load current and any external circuit connected to the same rail.
What does rail-to-rail output mean for the OPA251UA?
Rail-to-rail output means the OPA251UA output stage can swing close to both supply rails under its specified operating conditions. According to the Texas Instruments OPA251 product information, this feature increases the usable output-voltage range for low-voltage systems. It does not guarantee an exact output equal to either rail, so load current, output impedance, temperature, and the datasheet swing limits must be checked before setting analog headroom.
Is the OPA251UA suitable for battery-powered sensor circuits?
The OPA251UA is suitable for many battery-powered sensor circuits because its approximately 25 uA quiescent current limits standing power while rail-to-rail output increases signal headroom. According to the Texas Instruments OPA251 family description, the amplifier was designed for portable applications. Suitability also depends on the sensor output range, required bandwidth, common-mode range, offset accuracy, and whether the signal can tolerate the amplifier's input and output limitations.
Where can I download the OPA251UA datasheet PDF?
The official OPA251 datasheet is available through the Texas Instruments OPA251 product page and the linked technical document at https://www.ti.com/lit/gpn/OPA251. Use the manufacturer's document for the electrical characteristics, pin configuration, typical application circuit, package drawing, and recommended operating conditions. The OPA251UA ordering information identifies the device as the single-amplifier 8-pin SOIC option in the OPA251 family.
Where can I find the OPA251UA pinout?
Use the pin-configuration diagram in the Texas Instruments OPA251 data sheet to identify the OPA251UA pinout because the 8-pin SOIC footprint contains supply, ground, input, output, and configuration connections. The exact signal names and configuration details should be taken from that manufacturer diagram rather than inferred from a generic SOIC drawing. Confirm the pin numbers against the package drawing before assigning PCB tracks or connecting a prototype.
What is the difference between OPA251UA and OPA251UA/2K5?
The OPA251UA and OPA251UA/2K5 identify different ordering options within the same OPA251UA device family rather than different amplifier architectures. The Texas Instruments ordering information associates both with the single 15 V micro-power amplifier in an 8-pin SOIC package. The ordering suffix must be interpreted according to the manufacturer's packing and reel definitions, so the required mechanical configuration and procurement code should be confirmed before substitution.
What is the best drop-in replacement for the OPA251UA?
The closest verified drop-in candidate is the OPA251UA/2K5, which uses the same OPA251UA family and 8-pin SOIC ordering structure. Texas Instruments lists it as an active replacement option for OPA251UA. No additional same-package replacement was established with a sufficiently documented pinout and electrical comparison, so engineers should verify the exact manufacturer ordering suffix and required reel configuration before approving a substitution.
Can OPA251UA/2K5 replace OPA251UA?
Yes, OPA251UA/2K5 can serve as an OPA251UA replacement when its ordering, packing, and package configuration satisfy the assembly requirements. The Texas Instruments product details identify OPA251UA/2K5 as a replacement for OPA251UA and retain the same 15 V single-supply amplifier description and 8-pin package family. This equivalence does not remove the need to confirm the reel format, quantity, and production configuration.
When should I choose the OPA251UA over a higher-bandwidth op amp?
Choose the OPA251UA when the signal path is low frequency, low power, and primarily concerned with amplification rather than waveform fidelity. Its approximately 35 kHz gain-bandwidth behavior and 25 uA quiescent current fit low-bandwidth sensor and instrumentation channels. Select a faster amplifier when the required closed-loop bandwidth, slew rate, settling time, or distortion cannot be met within that operating envelope.
Is the OPA251UA suitable for audio applications?
The OPA251UA can be used in low-frequency audio-support circuits when its approximately 35 kHz gain-bandwidth behavior is sufficient for the signal being processed. According to the Texas Instruments OPA251 family information, the device provides low offset, rail-to-rail output, and high common-mode rejection. Full-range audio reproduction normally requires wider bandwidth and lower distortion, so headphone drivers, line outputs, and precision audio paths should be checked against the detailed electrical limits.
How should I decouple the OPA251UA power supply?
Place a local supply bypass capacitor close to the OPA251UA supply and ground pins, and route the return path without long loops through signal-carrying traces. For the OPA251 family, follow the bypass-capacitor connection shown in the manufacturer data sheet and verify the effective capacitance and dielectric characteristics against stability requirements. Adequate decoupling helps reduce supply-related noise but cannot correct a design that exceeds the amplifier's input or output voltage limits.
How much thermal dissipation does the OPA251UA produce?
The OPA251UA's power dissipation is determined primarily by the supply voltage, output voltage, and load current rather than by the approximately 25 uA quiescent current alone. Estimated: use PD = (VIN - VOUT) x IOUT for the linear output-stage contribution, add quiescent power as VIN x IQ, and verify the resulting junction temperature against the -40 C to 85 C operating range. Actual worst-case dissipation must include load-current and temperature variation.
What are the key OPA251UA specifications engineers should know?
The key OPA251UA specifications are its single-amplifier configuration, 15 V maximum supply, approximately 25 uA quiescent current, approximately 35 kHz gain-bandwidth product, rail-to-rail output, and 8-pin SOIC package. According to the Texas Instruments product information, the family also provides low offset voltage, high common-mode rejection, and high open-loop gain. Exact numeric limits for offset, gain, noise, slew rate, and input range require the OPA251 manufacturer data sheet.
Where can I buy OPA251UA and request a quote?
Use the Request a Quote form on this XAIPART product page to ask about OPA251UA availability, current lead time, minimum order quantity, and the required 8-pin SOIC ordering configuration. A quote request is the appropriate commercial workflow because inventory and delivery conditions can change faster than a static product listing. Include your target quantity, date code policy, and whether tape-and-reel or another approved packing format is required.
Is the OPA251UA in stock and what is its lead time?
Current OPA251UA stock and lead time should be requested through the Request a Quote form on this page. The Texas Instruments product information identifies OPA251UA/2K5 as active, but device status does not by itself confirm available inventory for a particular order. Provide the required quantity, OPA251UA ordering suffix, and delivery target so the current supply position can be confirmed before committing the production schedule.
What is the OPA251UA price?
The current OPA251UA commercial terms are handled through the Request a Quote form on this page. Submit the required quantity, ordering suffix, and packaging preference for a quotation reflecting current supply conditions. Static prices are intentionally not stated because component pricing and availability can change independently of the technical characteristics of the 15 V single-supply, 25 uA operational amplifier.

Impormasyon ng Talumpati sa Engineering for OPA251UA — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the OPA251UA when the design needs one low-power, low-frequency, single-supply amplifier and can operate within a 15 V maximum supply. Its approximately 25 uA quiescent current, rail-to-rail output, and 8-pin SOIC package are particularly useful for portable sensors, monitoring equipment, and compact instrumentation. Select OPA251UA/2K5 when its manufacturer-defined ordering and packing configuration matches the assembly plan and it is documented as the replacement ordering option for OPA251UA. Do not choose this amplifier for high-speed waveform conditioning, precision high-slew-rate signals, or applications requiring an input common-mode range different from that specified for the OPA251 family. Because no additional drop-in candidates have been established with complete pin and parameter documentation, PCB reuse should not be assumed for unrelated amplifier families. Confirm the exact electrical limits, pin configuration, and operating temperature requirements from the Texas Instruments data sheet before production release.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 8-pin SOIC
Brand Texas Instruments
Amplifier Type Single general-purpose operational amplifier
Maximum Supply Voltage 15 V
Quiescent Current 25 uA
Gain-Bandwidth Product 35 kHz
Output Swing Rail-to-rail
Operating Temperature Range -40 C to 85 C

Pangunahing mga Pagkakaiba

  • Low-power single-amplifier configuration (kumpara saOPA251UA/2K5)
  • Useful output range from a single supply (kumpara saOPA251UA/2K5)
  • Compact package for one-channel designs (kumpara saOPA251UA/2K5)

Talaan ng Disenyo

Place the supply bypass capacitor directly between the OPA251UA supply and ground pins, following the connection shown in the manufacturer data sheet. Keep the loop short and route it away from high-current switching nodes. Because the amplifier is designed around approximately 25 uA quiescent current, also account for load current in the rail budget; low standby consumption does not prevent output-stage dissipation when the output is heavily loaded.

Use a compact, low-impedance ground return for the amplifier and keep the feedback resistors close to the device to minimize parasitic coupling. Avoid routing the high-impedance input node beneath digital or switching traces. The OPA251UA is intended for low-frequency signals, but good layout still matters at sensor-level voltages where interference can be comparable to the signal being measured.

Do not interpret rail-to-rail output as an exact rail-to-rail swing guarantee. Check the OPA251 data sheet for output swing versus output load and temperature, and confirm that the input common-mode range includes the source signal at every operating corner. Its approximately 35 kHz gain-bandwidth product is also not sufficient for many high-frequency, precision-settling, or full-bandwidth audio applications.

Estimated: calculate linear dissipation as PD approximately equals (VIN - VOUT) multiplied by IOUT, plus VIN multiplied by IQ. Apply the calculated loss to the SOIC thermal model and compare the resulting junction temperature with the -40 C to 85 C operating range. These calculations are design estimates rather than guaranteed maxima; the final thermal assessment should use the manufacturer limits and the maximum expected supply, load, and ambient conditions.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Yes
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The OPA251UA listing identifies the RoHS-compliant, lead-free, green device configuration. No additional REACH, halogen-free, conflict-minerals, or automotive qualification claim was established.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

OPA251UA datasheet OPA251UA pinout OPA251UA datasheet pdf OPA251UA specifications OPA251UA replacement OPA251UA equivalent OPA251UA cross reference OPA251UA price OPA251UA stock Texas Instruments OPA251UA OPA251UA 15V op amp OPA251UA 8-SOIC package OPA251UA sensor amplifier OPA251UA battery powered circuit OPA251UA OPA251UA/2K5

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments OPA251 OPA251UA OPA251UA/2K5 OPA2251 OPA4251 OPA241 operational amplifier general-purpose amplifier voltage-feedback amplifier analog integrated circuit rail-to-rail output micro-power amplifier quiescent current offset voltage common-mode rejection ratio CMRR open-loop gain gain-bandwidth product single supply 8-pin SOIC SOIC package surface-mount package battery-powered electronics sensor signal conditioning
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ