Texas Instruments

OPA2607U - Dual 50MHz CMOS Op Amp | Texas Instruments

MPN: OPA2607U ✓ Nakahanda
±12 V Vdss 8-pin SOIC Package
MOQ: 1 |

OPA2607U Ulas

Texas Instruments OPA2607U is a dual, high-output-current, decompensated CMOS current-feedback operational amplifier with a 50 MHz gain-bandwidth product, unity-gain stability, and wideband operation across ±12 V supplies. The device is offered in an 8-pin SOIC package and is designed for signal chains requiring high speed, broad output swing, and low distortion.

An operational amplifier is an analog signal-conditioning semiconductor that amplifies the difference between two input voltages. The OPA2607 belongs to the current-feedback amplifier family, where closed-loop bandwidth is influenced by the feedback network rather than only by the closed-loop gain. Within the broader hierarchy, it is a voltage-feedback-compatible precision analog IC, an instrumentation amplifier building block, and a high-speed linear signal-processing component.

Principal features include dual-channel operation, a 50 MHz gain-bandwidth product, unity-gain stability, wideband ±12 V operation, and high output-current capability. These characteristics make the amplifier useful where fast edge rates, low distortion, or substantial current drive matter. The decompensated architecture is particularly relevant to cable-driver, video, communications, and active-filter circuits designed with appropriate feedback networks.

OPA2607U is based on CMOS technology, which supports low power consumption and high integration density. Current-feedback topology can preserve useful bandwidth at higher closed-loop gains when the feedback resistor and compensation values are selected correctly. Because it is a decompensated amplifier, its minimum stable gain and gain-bandwidth distribution should be checked in the manufacturer datasheet rather than inferred from a conventional unity-gain op amp.

Typical applications include ADSL upstream line-driver stages, video amplification and distribution, audio signal paths, active filters, communications receivers, and instrumentation front ends. The dual channel also allows one package to implement two related analog functions, reducing board area when both channels operate in the same signal domain.

The primary design consideration is feedback-network compatibility. Use the manufacturer-recommended feedback resistors, compensation capacitors, supply bypassing, and output-loading limits. A short output trace, local ground return, and decoupling capacitors placed close to the supply pins help preserve high-frequency behavior and reduce instability risk.

This product page consolidates the verified package, technology, operating-range, and application characteristics of the OPA2607U with practical guidance for power routing, feedback design, sourcing, and drop-in replacement evaluation.

Mga alternatibo na pwedeng ilagay na OPA2607U — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

OPA2607H

✅ Drop-In
Texas Instruments
📦 8-pin SOIC
Dual operational amplifier · Decompensated CMOS current-feedback operational amplifier · 2 channels · 50 MHz · 3.8 nV/√Hz · 6 V/V · High-impedance CMOS input

Magkontak para sa presyo

Tingnan ang Datasheet →

OPA2607

✅ Drop-In
📦 8-pin SOIC
OPA2607 is the base family designation; its 50 MHz gain-bandwidth product matches OPA2607U, while package suffix and grade must be selected explicitly

📋 Alternatibo na Reference (hindi sa katalogo)

OPA2607U Mga Pinakamataas na Rating at Electrical Characteristics

Channel Count 2 channels
Amplifier Type Current-feedback operational amplifier
Gain-Bandwidth Product 50 MHz
Gain Stability Unity-gain stable
Wideband Supply Operation ±12 V
Process Technology CMOS
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount
Packaging Tube

Gabay sa Pin Configuration ng OPA2607U 8-pin soic

Pin configuration para sa OPA2607U (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin soic package para sa OPA2607U

Wala ng detalyadong pinout data na magagamit para sa OPA2607U.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

OPA2607U ay nararapat para sa 6 aplikasyons: ADSL Upstream Driver, Video Signal Amplification, Active Filter and Equalizer, Communications Receiver Front End, Audio Signal Conditioning, Precision Instrumentation Amplification.

🌐

ADSL Upstream Driver

OPA2607U is well suited to ADSL upstream driver circuitry because the OPA2607 family combines 50 MHz gain-bandwidth product, high output-current capability, and wideband ±12 V operation. The amplifier can drive the required external gain and filtering network while maintaining low distortion at high signal amplitudes. Design the feedback network from the manufacturer recommendations, verify output swing under the worst-case load, and provide local supply bypassing. The principal trade-off is that the decompensated current-feedback architecture requires more deliberate gain and compensation planning than a conventional unity-stable voltage-feedback amplifier.

📺

Video Signal Amplification

OPA2607U can provide the high-speed, high-drive amplification required in video distribution, termination, and gain-control stages. Its 50 MHz gain-bandwidth product supports wideband signal passage, while the two amplifier channels can implement related buffering or differential functions in one 8-pin SOIC. Keep feedback traces short, place bypass capacitors beside the supply pins, and check capacitive-load stability when driving cables or downstream devices. The tradeoff is that output amplitude and distortion depend on load, supply voltage, and frequency, so those conditions must be verified against the device limits.

🎧

Active Filter and Equalizer

OPA2607U is applicable to active filters and equalizer stages requiring accurate high-frequency behavior, wide bandwidth, and stronger output drive than many general-purpose amplifiers provide. The dual-channel package is useful for cascaded sections or parallel signal processing, while the 50 MHz gain-bandwidth product gives ample bandwidth for filter synthesis above the audible range. The current-feedback topology requires suitable feedback resistors and compensation values for the target gain. Validate phase margin and output-current demand during simulation because incorrect feedback values can reduce stability or increase distortion.

🌐

Communications Receiver Front End

OPA2607U can serve as a high-bandwidth amplifier in communications receiver chains where signal conditioning must occur before filtering, digitization, or demodulation. Its 50 MHz bandwidth, wideband ±12 V capability, and high output-current capability provide useful headroom for moderate-gain analog stages. Use low-inductance routing, local ground returns, and decouple each supply connection to prevent high-frequency supply modulation from entering the signal path. Review noise, input common-mode range, and output swing for the actual receiver front end because bandwidth alone does not determine full signal-chain performance.

🎧

Audio Signal Conditioning

OPA2607U is suitable for audio and instrumentation signal-conditioning stages that benefit from high bandwidth and strong output drive. The two channels can process related signals, such as a buffered sensor output and an auxiliary channel, while the 50 MHz gain-bandwidth product supports signal paths above the audio band. Feedback components should be selected according to the intended gain, and the output must remain within the device's swing and current limits. Because wideband, high-drive behavior can increase sensitivity to layout-induced oscillation, keep feedback loops compact and verify capacitive-load stability before production.

🏭

Precision Instrumentation Amplification

OPA2607U can be used in instrumentation and measurement circuits where fast settling, wideband signal capture, and low distortion are more important than minimum power consumption. Its dual-channel arrangement can reduce package count when two measurement channels require similar conditioning, and the 50 MHz bandwidth supports high-speed sensor and test equipment. Input and output range must be checked for the selected supply configuration, while offset, noise, bias current, and thermal performance require confirmation for high-accuracy measurement. Use clean grounding, short analog traces, and stable feedback networks to preserve measured signal integrity.

Buod ng mga Inirekomendang Produkto

OPA2607H Texas Instruments Ginagamit sa: ADSL Upstream Driver, Video Signal Amplification, Active Filter and Equalizer, Communications Receiver Front End, Audio Signal Conditioning, Precision Instrumentation Amplification OPA2607 Base-family ordering reference Ginagamit sa: ADSL Upstream Driver, Video Signal Amplification, Active Filter and Equalizer, Communications Receiver Front End, Audio Signal Conditioning, Precision Instrumentation Amplification
What is the OPA2607U?
The OPA2607U is a dual, 50 MHz, decompensated CMOS current-feedback operational amplifier in an 8-pin SOIC package. According to the Texas Instruments OPA2607 product page, it is a low-power precision amplifier optimized for wideband ±12 V operation and unity-gain stability. Its current-feedback architecture and high output-current capability make it appropriate for fast analog signal paths, active filters, video circuits, and communications equipment.
Where can I download the OPA2607U datasheet PDF?
The official OPA2607U technical information is available through the Texas Instruments OPA2607 product page at https://www.ti.com/product/OPA2607. The manufacturer documentation provides the electrical characteristics, ordering information, pin configuration, application guidance, and package drawings needed to evaluate the amplifier. Use the OPA2607 family document for the OPA2607U ordering option and confirm that its electrical limits match the specific grade and package.
What is the OPA2607U pinout?
The OPA2607U uses an 8-pin SOIC package with two complete operational-amplifier channels. Assign each amplifier's inverting input, non-inverting input, supply, output, and power-ground pins strictly from the pin-description table in the Texas Instruments OPA2607 documentation. Because a complete manufacturer pin list is not reproduced on this page, use the package drawing and pin table before assigning PCB tracks or test points.
What are the key specifications of OPA2607U that engineers should know?
The OPA2607U combines two amplifier channels, a 50 MHz gain-bandwidth product, unity-gain stability, CMOS construction, and operation across ±12 V supplies. According to the Texas Instruments OPA2607 product page, it is a decompensated current-feedback amplifier with high output-current capability. These characteristics distinguish it from general-purpose voltage-feedback amplifiers and make feedback selection and output loading central to the design.
Is OPA2607U suitable for ADSL upstream driver applications?
Yes, OPA2607U is suitable for ADSL upstream driver signal chains because its high output-current capability, broad bandwidth, high output-voltage swing, and low-distortion design match the demanding requirements of line-driver stages. The manufacturer identifies this application for the OPA2607 family. Confirm output swing, slew rate, stability, and allowable loading against the exact operating conditions in the datasheet before production release.
What can replace OPA2607U?
OPA2607H is the closest identified replacement candidate because it belongs to the same dual high-output current-feedback amplifier family and is offered in the comparable 8-pin SOIC format. However, a safe replacement requires checking the exact pin assignments, supply limits, gain stability, feedback values, temperature grade, and output-current requirements. The Request a Quote form on this page can be used to confirm the required package and sourcing status.
Is OPA2607H the same as OPA2607U?
OPA2607H is not automatically interchangeable with OPA2607U even though both are members of the OPA2607 family. The suffix can indicate a different package, grade, or ordering configuration, and the verified comparison material does not establish all electrical and mechanical conditions. Before substitution, compare the OPA2607 datasheet ordering table, pinout, operating-temperature limits, and recommended feedback networks.
OPA2607U vs OPA2607H: which is better for a legacy replacement?
OPA2607U is preferable when the original design specifically requires the U ordering option and its documented 8-pin SOIC configuration. OPA2607H should be considered only when the manufacturer ordering information confirms the same package, pinout, electrical limits, and environmental grade. For a no-change PCB replacement, compare the ordering table and pin descriptions rather than relying on the shared OPA2607 family name alone.
When should I choose OPA2607U over another amplifier?
Choose OPA2607U when the design needs two high-speed current-feedback channels, a 50 MHz gain-bandwidth product, wideband ±12 V operation, and high output-current capability in one 8-pin SOIC. It is especially useful for video, communications, active-filter, and signal-driver circuits where conventional general-purpose op amps may lack bandwidth or drive. Confirm that the required noise, distortion, input range, and stability are acceptable.
Is OPA2607U suitable for video amplification?
OPA2607U is suitable for many video and general high-speed signal-amplification stages because the OPA2607 family provides 50 MHz bandwidth, wideband operation, high output drive, and a dual-channel configuration. Use stable feedback networks, control capacitive loading, and maintain short PCB traces. The exact output swing, slew rate, and distortion limits should be checked for the selected supply and output-load conditions.
Where can I buy OPA2607U online?
Use the Request a Quote form on this XAIPART product page to request OPA2607U availability, current lead time, minimum order quantity, and the appropriate tube packaging. Quote requests are the appropriate route for this legacy amplifier because pricing and inventory can change quickly. Provide the exact MPN, target quantity, and required delivery destination so the request can be matched efficiently.
What is the price of OPA2607U?
The current commercial price for OPA2607U is obtained through the Request a Quote form on this page rather than through a static price statement. The form can return the applicable quantity and packaging information for the exact OPA2607U ordering option. Include the required quantity and whether the parts must be supplied in the manufacturer tube configuration.
What is the lead time for OPA2607U?
Lead time for OPA2607U should be confirmed through the Request a Quote form on this page because availability can vary with quantity, package configuration, and sourcing conditions. The verified product listing identifies the U ordering option as an 8-pin SOIC device supplied in a tube. State the required production quantity and target delivery date when submitting the request.
Is OPA2607U in stock?
Current OPA2607U stock status is best confirmed through the Request a Quote form on this page. The verified listings identify the amplifier, package, and tube packaging, but a definitive inventory quantity must be matched to the requested order. Include the required part quantity and delivery schedule so the quotation can reflect the appropriate allocation.
How should feedback and bypassing be designed for OPA2607U?
Use the feedback resistor and compensation values recommended for the intended gain and bandwidth in the Texas Instruments OPA2607 documentation. Place supply-decoupling capacitors close to the device, keep input and feedback traces short, and return output-current paths directly to the power ground. These practices reduce parasitic feedback, preserve the intended high-frequency response, and reduce the risk of oscillation with capacitive loading.

Impormasyon ng Talumpati sa Engineering for OPA2607U — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose OPA2607U for legacy or new designs that specifically require a dual current-feedback amplifier with a 50 MHz gain-bandwidth product, wideband ±12 V operation, unity-gain stability, and high output-current capability in an 8-pin SOIC. It is particularly appropriate for ADSL upstream drivers, video signal paths, active filters, communications receivers, and instrumentation stages where bandwidth and drive are priorities. Evaluate OPA2607H when maintaining an OPA2607-family design, but verify its ordering suffix, temperature grade, pinout, electrical limits, and recommended feedback components before treating it as a drop-in substitution. Use the base OPA2607 family entry for technical reference rather than procurement until a complete orderable MPN is selected. For any replacement, confirm power-supply limits, output swing, load stability, input range, and PCB footprint rather than relying only on bandwidth and package type.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto OPA2607H OPA2607
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Channel Count 2 channels 2 channels 2 channels
Amplifier Architecture Decompensated current-feedback Current-feedback Decompensated current-feedback
Process Technology CMOS CMOS CMOS
Ordering Suffix U H Base family designation

Pangunahing mga Pagkakaiba

  • Higher gain-bandwidth product than a general-purpose precision amplifier (kumpara saOPA2607H)
  • Dual high-output-current channels in one package (kumpara saOPA2607)
  • Wideband operation for communications and video signal paths (kumpara saOPA2607H)
  • Unity-gain-stable operation for flexible gain planning (kumpara saOPA2607)

Talaan ng Disenyo

Keep the op-amp input, feedback, and output paths short, and place supply-decoupling capacitors directly beside the relevant pins. A compact feedback loop reduces parasitic feedback that can alter bandwidth or stability. Route output-current return current through a dedicated ground path to the device rather than through shared analog signal wiring. These layout practices are especially important because the OPA2607 is designed for wideband, high-output-current operation.

Do not treat OPA2607 like a generic unity-stable voltage-feedback amplifier. Select the feedback resistor and compensation capacitor from the manufacturer guidance for the intended closed-loop gain, and confirm the minimum stable gain for every operating mode. Substitution between family suffixes is appropriate only after checking pin assignments, temperature grade, electrical limits, and feedback recommendations in the ordering documentation.

Estimated: amplifier dissipation is Pd = (V+ - V-) × I supply when the output is near the midpoint of the two supply rails. Use the actual total supply current for both channels when estimating junction heating. Confirm the maximum supply voltage, total supply current, and ambient-temperature limits from the manufacturer documentation, then provide copper area and airflow appropriate for the calculated dissipation and allowable junction temperature.

Check output stability with the intended cable, connector, ADC input, or other capacitive load because high-speed amplifiers can oscillate when driving capacitance beyond their stable-load range. Use the shortest practical output trace, avoid long stubs, and add isolation or damping only after evaluating its effect on bandwidth and amplitude. Verify final signal integrity with time-domain and frequency-domain measurements on representative hardware.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the OPA2607U. This operational amplifier is not an automotive-qualified AEC-Q100 device based on the available product information.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

OPA2607U datasheet OPA2607U pinout OPA2607U datasheet pdf OPA2607U specifications OPA2607U equivalent OPA2607U replacement OPA2607U vs OPA2607H Texas Instruments OPA2607U OPA2607U 50MHz amplifier OPA2607U SOIC-8 pinout OPA2607U price OPA2607U stock OPA2607U ADSL driver OPA2607U video amplifier what is OPA2607U used for

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments OPA2607U OPA2607H OPA2607 dual operational amplifier current-feedback operational amplifier decompensated amplifier precision amplifier CMOS operational amplifier amplifier IC analog signal conditioning 50 MHz gain-bandwidth product unity-gain stable high output current wideband ±12 V operation 8-pin SOIC SOIC package family surface-mount package ADSL upstream driver video signal amplification active filter communications receiver instrumentation amplifier feedback network supply bypassing
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ