OPA2607U - Dual 50MHz CMOS Op Amp | Texas Instruments
부품 번호: OPA2607U ✓ 활성OPA2607U 개요
An operational amplifier is an analog signal-conditioning semiconductor that amplifies the difference between two input voltages. The OPA2607 belongs to the current-feedback amplifier family, where closed-loop bandwidth is influenced by the feedback network rather than only by the closed-loop gain. Within the broader hierarchy, it is a voltage-feedback-compatible precision analog IC, an instrumentation amplifier building block, and a high-speed linear signal-processing component.
Principal features include dual-channel operation, a 50 MHz gain-bandwidth product, unity-gain stability, wideband ±12 V operation, and high output-current capability. These characteristics make the amplifier useful where fast edge rates, low distortion, or substantial current drive matter. The decompensated architecture is particularly relevant to cable-driver, video, communications, and active-filter circuits designed with appropriate feedback networks.
OPA2607U is based on CMOS technology, which supports low power consumption and high integration density. Current-feedback topology can preserve useful bandwidth at higher closed-loop gains when the feedback resistor and compensation values are selected correctly. Because it is a decompensated amplifier, its minimum stable gain and gain-bandwidth distribution should be checked in the manufacturer datasheet rather than inferred from a conventional unity-gain op amp.
Typical applications include ADSL upstream line-driver stages, video amplification and distribution, audio signal paths, active filters, communications receivers, and instrumentation front ends. The dual channel also allows one package to implement two related analog functions, reducing board area when both channels operate in the same signal domain.
The primary design consideration is feedback-network compatibility. Use the manufacturer-recommended feedback resistors, compensation capacitors, supply bypassing, and output-loading limits. A short output trace, local ground return, and decoupling capacitors placed close to the supply pins help preserve high-frequency behavior and reduce instability risk.
This product page consolidates the verified package, technology, operating-range, and application characteristics of the OPA2607U with practical guidance for power routing, feedback design, sourcing, and drop-in replacement evaluation.
드롭인 대체품: OPA2607U — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
OPA2607H
✅ 드롭인가격 문의
데이터시트 보기 →OPA2607
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
OPA2607U 최대 정격 & 전기적 특성
| Channel Count | 2 channels |
| Amplifier Type | Current-feedback operational amplifier |
| Gain-Bandwidth Product | 50 MHz |
| Gain Stability | Unity-gain stable |
| Wideband Supply Operation | ±12 V |
| Process Technology | CMOS |
| 패키지 | 8-pin SOIC |
| 실장 유형 | Surface mount |
| Packaging | Tube |
OPA2607U 8-pin soic 핀 구성 가이드
OPA2607U(8-pin soic 패키지)의 핀 구성입니다. 이 아날로그 부품에는 입력, 출력, 전원 공급 핀이 있습니다. 오프셋 널, 보상, 인에이블 핀 구성은 제조사 데이터시트를 참조하십시오. 신호 컨디셔닝 및 증폭기 회로에 이상적입니다.
다음에 대한 상세 핀아웃 데이터 없음: OPA2607U.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
OPA2607U 적합 용도: 6 애플리케이션s: ADSL Upstream Driver, Video Signal Amplification, Active Filter and Equalizer, Communications Receiver Front End, Audio Signal Conditioning, Precision Instrumentation Amplification.
ADSL Upstream Driver
OPA2607U is well suited to ADSL upstream driver circuitry because the OPA2607 family combines 50 MHz gain-bandwidth product, high output-current capability, and wideband ±12 V operation. The amplifier can drive the required external gain and filtering network while maintaining low distortion at high signal amplitudes. Design the feedback network from the manufacturer recommendations, verify output swing under the worst-case load, and provide local supply bypassing. The principal trade-off is that the decompensated current-feedback architecture requires more deliberate gain and compensation planning than a conventional unity-stable voltage-feedback amplifier.
추천
Video Signal Amplification
OPA2607U can provide the high-speed, high-drive amplification required in video distribution, termination, and gain-control stages. Its 50 MHz gain-bandwidth product supports wideband signal passage, while the two amplifier channels can implement related buffering or differential functions in one 8-pin SOIC. Keep feedback traces short, place bypass capacitors beside the supply pins, and check capacitive-load stability when driving cables or downstream devices. The tradeoff is that output amplitude and distortion depend on load, supply voltage, and frequency, so those conditions must be verified against the device limits.
추천
Active Filter and Equalizer
OPA2607U is applicable to active filters and equalizer stages requiring accurate high-frequency behavior, wide bandwidth, and stronger output drive than many general-purpose amplifiers provide. The dual-channel package is useful for cascaded sections or parallel signal processing, while the 50 MHz gain-bandwidth product gives ample bandwidth for filter synthesis above the audible range. The current-feedback topology requires suitable feedback resistors and compensation values for the target gain. Validate phase margin and output-current demand during simulation because incorrect feedback values can reduce stability or increase distortion.
추천
Communications Receiver Front End
OPA2607U can serve as a high-bandwidth amplifier in communications receiver chains where signal conditioning must occur before filtering, digitization, or demodulation. Its 50 MHz bandwidth, wideband ±12 V capability, and high output-current capability provide useful headroom for moderate-gain analog stages. Use low-inductance routing, local ground returns, and decouple each supply connection to prevent high-frequency supply modulation from entering the signal path. Review noise, input common-mode range, and output swing for the actual receiver front end because bandwidth alone does not determine full signal-chain performance.
추천
Audio Signal Conditioning
OPA2607U is suitable for audio and instrumentation signal-conditioning stages that benefit from high bandwidth and strong output drive. The two channels can process related signals, such as a buffered sensor output and an auxiliary channel, while the 50 MHz gain-bandwidth product supports signal paths above the audio band. Feedback components should be selected according to the intended gain, and the output must remain within the device's swing and current limits. Because wideband, high-drive behavior can increase sensitivity to layout-induced oscillation, keep feedback loops compact and verify capacitive-load stability before production.
추천
Precision Instrumentation Amplification
OPA2607U can be used in instrumentation and measurement circuits where fast settling, wideband signal capture, and low distortion are more important than minimum power consumption. Its dual-channel arrangement can reduce package count when two measurement channels require similar conditioning, and the 50 MHz bandwidth supports high-speed sensor and test equipment. Input and output range must be checked for the selected supply configuration, while offset, noise, bias current, and thermal performance require confirmation for high-accuracy measurement. Use clean grounding, short analog traces, and stable feedback networks to preserve measured signal integrity.
추천
추천 제품 요약
엔지니어링 참조 데이터: OPA2607U — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | OPA2607H | OPA2607 |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Channel Count | 2 channels | 2 channels | 2 channels |
| Amplifier Architecture | Decompensated current-feedback | Current-feedback | Decompensated current-feedback |
| Process Technology | CMOS | CMOS | CMOS |
| Ordering Suffix | U | H | Base family designation |
주요 차별점
- Higher gain-bandwidth product than a general-purpose precision amplifier (vs OPA2607H)
- Dual high-output-current channels in one package (vs OPA2607)
- Wideband operation for communications and video signal paths (vs OPA2607H)
- Unity-gain-stable operation for flexible gain planning (vs OPA2607)
설계 노트
Keep the op-amp input, feedback, and output paths short, and place supply-decoupling capacitors directly beside the relevant pins. A compact feedback loop reduces parasitic feedback that can alter bandwidth or stability. Route output-current return current through a dedicated ground path to the device rather than through shared analog signal wiring. These layout practices are especially important because the OPA2607 is designed for wideband, high-output-current operation.
Do not treat OPA2607 like a generic unity-stable voltage-feedback amplifier. Select the feedback resistor and compensation capacitor from the manufacturer guidance for the intended closed-loop gain, and confirm the minimum stable gain for every operating mode. Substitution between family suffixes is appropriate only after checking pin assignments, temperature grade, electrical limits, and feedback recommendations in the ordering documentation.
Estimated: amplifier dissipation is Pd = (V+ - V-) × I supply when the output is near the midpoint of the two supply rails. Use the actual total supply current for both channels when estimating junction heating. Confirm the maximum supply voltage, total supply current, and ambient-temperature limits from the manufacturer documentation, then provide copper area and airflow appropriate for the calculated dissipation and allowable junction temperature.
Check output stability with the intended cable, connector, ADC input, or other capacitive load because high-speed amplifiers can oscillate when driving capacitance beyond their stable-load range. Use the shortest practical output trace, avoid long stubs, and add isolation or damping only after evaluating its effect on bandwidth and amplitude. Verify final signal integrity with time-domain and frequency-domain measurements on representative hardware.
규정 준수 정보
No explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals status was identified for the OPA2607U. This operational amplifier is not an automotive-qualified AEC-Q100 device based on the available product information.