OPA651UB - 470 MHz Wideband Operational Amplifier | Texas Instruments
MPN: OPA651UB ✗ Tapus ng BuhayOPA651UB Ulas
An operational amplifier is a differential voltage amplifier whose inverting and non-inverting inputs are compared to produce an amplified output. The OPA651 belongs to the voltage-feedback operational-amplifier hierarchy, where closed-loop gain is set by external resistors. Compared with current-feedback amplifiers, a voltage-feedback amplifier combines familiar resistor-defined gain with wide bandwidth, making it useful across instrumentation and general-purpose precision analog designs.
The OPA651UB offers several performance benefits. Its 470 MHz bandwidth at gain of 2 V/V enables operation across a broad frequency range, while low-power operation limits consumption to approximately 50 mW under the stated operating conditions. Stable operation at gains of 2 V/V supports gain configurations where unity-gain stability is not required. Low input bias current of 4 µA helps reduce source-loading errors, and low harmonic distortion is valuable when amplifying signals with limited spurious-content budgets.
The device uses a true differential input stage and voltage-feedback topology. This architecture supports accurate closed-loop gain control and predictable signal amplification when paired with appropriate feedback and compensation networks. Its combination of high bandwidth and low distortion is particularly useful when signals must be processed rapidly without introducing significant additional harmonics.
Typical applications include test and measurement front ends, instrumentation amplifiers, low-level signal conditioning, active filters, video-support circuits, and communication equipment. The device is also appropriate for systems requiring fast settling, such as waveform acquisition and precision analog processing. Its industrial temperature designation supports operation from -40°C to +85°C, making it suitable for commercial and industrial environments.
When laying out a circuit, use short feedback paths and maintain symmetry between the two input branches to minimize parasitic feedback and preserve high-frequency stability. Pay attention to supply bypassing, output-load limitations, and the minimum stable closed-loop gain. The 8-pin SOIC footprint simplifies assembly but requires careful PCB layout to control parasitic capacitance at the high operating frequencies supported by the amplifier.
This page combines the manufacturer specifications, package information, drop-in alternatives, application guidance, comparison data, and practical layout considerations to support component selection and implementation of the OPA651UB in wideband analog systems.
Mga alternatibo na pwedeng ilagay na OPA651UB — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok OPA651UB (parehas na form factor at footprint) — pagkakaiba sa Amplifier Type, Operating Temperature Range, Package.
OPA651U
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →OPA651UB Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Voltage-feedback operational amplifier |
| Number of Circuits | 1 circuit |
| Bandwidth | 470 MHz at gain of 2 V/V |
| Gain Stability | Stable at gains of 2 V/V |
| Low-Power Consumption | 50 mW |
| Settling Time | 16 ns to 0.01% |
| Harmonic Distortion | Low at 5 MHz |
| Input Bias Current | 4 µA |
| Input Stage | True differential input |
| Packhaging | 8-pin SOIC |
| Terminal Count | 8 terminals |
| Terminal Form | Gull wing |
| Package Shape | Rectangular |
| Temperature Grade | Industrial |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng OPA651UB rectangular
Pin configuration para sa OPA651UB (rectangular package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa OPA651UB.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
OPA651UB ay nararapat para sa 6 aplikasyons: High-Speed Instrumentation Front Ends, Precision Active Filters, Waveform Acquisition Systems, Communications Signal Conditioning, Video Support Circuits, Industrial Analog Measurement.
High-Speed Instrumentation Front Ends
The OPA651UB fits high-speed instrumentation front ends that must amplify small sensor or probe signals while preserving waveform shape. Its 470 MHz bandwidth at a closed-loop gain of 2 V/V and 16 ns settling to 0.01% provide rapid signal response and accurate settling after transitions. The 4 µA input bias current also helps avoid excessive loading of high-impedance sources. Designers should use short, symmetric input and feedback paths, provide effective supply bypassing, and verify that the selected resistor network maintains a stable supported gain.
Inirekomenda
Precision Active Filters
OPA651UB is appropriate for wideband active-filter stages requiring controlled gain and fast transient response. Its voltage-feedback architecture supports conventional resistor-defined gain, while stable operation at gain 2 V/V permits useful bandwidth in moderate-gain filter sections. The low-power characteristic of approximately 50 mW can simplify thermal planning in multistage filters. Component tolerances, parasitic capacitance, and op-amp stability around the intended gain must be evaluated so that the nominal 470 MHz bandwidth does not produce unintended peaking or oscillation.
Inirekomenda
Waveform Acquisition Systems
The OPA651UB can serve as an input amplifier in waveform acquisition systems where rapid recovery and high bandwidth determine how faithfully an input transition is captured. Its 16 ns settling to 0.01% is valuable when the acquisition system must settle after a large input step, while 470 MHz bandwidth at gain 2 supports high-frequency signal paths. For best results, keep the amplifier close to the source, use symmetrical routing, minimize feedback-loop area, and select termination and gain values that preserve stability and avoid clipping.
Inirekomenda
Communications Signal Conditioning
OPA651UB supports communications signal-conditioning circuits that need broad bandwidth and low-added distortion. The amplifier operates as a voltage-feedback stage, making it suitable for gain sections, buffers, and linearized paths around modulation or demodulation blocks. Its low harmonic distortion at 5 MHz helps preserve signal quality in multi-carrier systems, while the 4 µA input bias current reduces loading from high-impedance networks. The implementation should include local decoupling and carefully controlled routing because operating close to the amplifier's bandwidth limit magnifies PCB parasitic effects.
Inirekomenda
Video Support Circuits
OPA651UB can be used in wideband video-support circuitry where signal amplitude must be controlled without severe bandwidth limitation. Its 470 MHz bandwidth at gain 2 V/V and low-power operation of approximately 50 mW provide a useful combination for active gain blocks, line drivers, and cross-point interfaces. Designers should account for the amplifier's high-frequency phase behavior and verify output swing into the intended load. Short video traces, solid ground-plane continuity, and close placement of supply bypass capacitors help maintain predictable performance.
Inirekomenda
Industrial Analog Measurement
OPA651UB is suitable for industrial analog-measurement modules operating across the -40°C to +85°C industrial temperature range. Its wide bandwidth handles fast sensor signals, while low input bias current of 4 µA reduces errors when connected to high-impedance sources. The device also supports precision closed-loop gain configurations where 16 ns settling and low harmonic distortion are valuable. Production designs should include input protection, supply filtering, calibration paths, and a PCB layout that separates sensitive input routing from digital and switching-supply nodes.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for OPA651UB — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | OPA651U |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC - same package |
| Amplifier Type | Voltage-feedback operational amplifier | Voltage-feedback operational amplifier |
| Number of Circuits | 1 circuit | 1 circuit |
| Bandwidth | 470 MHz at gain of 2 V/V | 470 MHz at gain of 2 V/V |
| Settling Time | 16 ns to 0.01% | 16 ns to 0.01% |
| Input Bias Current | 4 µA | 4 µA |
| Minimum Stable Gain | 2 V/V | 2 V/V |
| Power Consumption | 50 mW | 50 mW |
Pangunahing mga Pagkakaiba
- High bandwidth at a practical gain setting (kumpara saOPA651U)
- Fast 0.01% settling (kumpara saOPA651U)
- Low input loading (kumpara saOPA651U)
Talaan ng Disenyo
Use a continuous ground plane and place the OPA651UB close to the source and feedback components. Keep the two input branches similarly routed, avoid long traces around the amplifier, and minimize the loop area between the output and feedback resistor. Parasitic capacitance in a high-bandwidth feedback path can create peaking or instability, so component placement is part of the circuit design rather than a final assembly detail.
Place low-inductance bypass capacitors close to the supply pins and follow the manufacturer datasheet recommendations for the capacitor type and placement. Wideband op-amps require a low-impedance supply path, especially when driving capacitive or resistive loads. Check output-current and output-swing limits for the selected supply voltage, and avoid inductive supply spikes that could cause instability even when the average operating point appears acceptable.
Do not assume that 470 MHz bandwidth at gain 2 V/V means the OPA651UB is unity-gain stable. Configure the feedback network for a supported closed-loop gain and review the datasheet for decompensation and noise-gain details. Also avoid treating the low-power rating as a guarantee that every operating combination is thermally unrestricted; calculate worst-case dissipation from the actual supply voltage, output swing, and load current.
For high-frequency input or output signals, use controlled-impedance routing where practical and terminate unused amplifier outputs according to the application topology. Check component parasitics and probe capacitance because they can alter closed-loop response even when the schematic is correct. Validate gain, phase margin, and settling in the assembled PCB rather than relying only on nominal bandwidth and gain-bandwidth figures.
Impormasyon ng Pagsunod sa Kautusan
The device is identified as an industrial-grade operational amplifier. Current RoHS, REACH, lead-free, halogen-free, and conflict-minerals status was not established and should be confirmed from current manufacturer documentation.