Texas Instruments

OPA651UB - 470 MHz Wideband Operational Amplifier | Texas Instruments

MPN: OPA651UB ✗ סוף ייצור
4 µA Id 8-pin SOIC Package
כמות הזמנה מינימלית: 1 |

OPA651UB סקירה

Texas Instruments OPA651UB is a single-circuit, wideband, low-power voltage-feedback operational amplifier with 470 MHz bandwidth at a gain of 2 V/V, packaged in an 8-pin SOIC. It also provides 0.01% fast settling, low harmonic distortion at 5 MHz, and low input bias current of 4 µA. These characteristics make the OPA651UB suitable for high-speed instrumentation, signal conditioning, active filtering, and analog signal-chain applications.

An operational amplifier is a differential voltage amplifier whose inverting and non-inverting inputs are compared to produce an amplified output. The OPA651 belongs to the voltage-feedback operational-amplifier hierarchy, where closed-loop gain is set by external resistors. Compared with current-feedback amplifiers, a voltage-feedback amplifier combines familiar resistor-defined gain with wide bandwidth, making it useful across instrumentation and general-purpose precision analog designs.

The OPA651UB offers several performance benefits. Its 470 MHz bandwidth at gain of 2 V/V enables operation across a broad frequency range, while low-power operation limits consumption to approximately 50 mW under the stated operating conditions. Stable operation at gains of 2 V/V supports gain configurations where unity-gain stability is not required. Low input bias current of 4 µA helps reduce source-loading errors, and low harmonic distortion is valuable when amplifying signals with limited spurious-content budgets.

The device uses a true differential input stage and voltage-feedback topology. This architecture supports accurate closed-loop gain control and predictable signal amplification when paired with appropriate feedback and compensation networks. Its combination of high bandwidth and low distortion is particularly useful when signals must be processed rapidly without introducing significant additional harmonics.

Typical applications include test and measurement front ends, instrumentation amplifiers, low-level signal conditioning, active filters, video-support circuits, and communication equipment. The device is also appropriate for systems requiring fast settling, such as waveform acquisition and precision analog processing. Its industrial temperature designation supports operation from -40°C to +85°C, making it suitable for commercial and industrial environments.

When laying out a circuit, use short feedback paths and maintain symmetry between the two input branches to minimize parasitic feedback and preserve high-frequency stability. Pay attention to supply bypassing, output-load limitations, and the minimum stable closed-loop gain. The 8-pin SOIC footprint simplifies assembly but requires careful PCB layout to control parasitic capacitance at the high operating frequencies supported by the amplifier.

This page combines the manufacturer specifications, package information, drop-in alternatives, application guidance, comparison data, and practical layout considerations to support component selection and implementation of the OPA651UB in wideband analog systems.

חלופות תחליף ישיר עבור OPA651UB — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם OPA651UB (אותו גורם צורה וטביעת רגל) — שונים ב Amplifier Type, Operating Temperature Range, Package.

Texas Instruments
Amplifier Type: Voltage Feedback Operational Amplifier
Operating Temperature Range: -40 °C to +85 °C
Package: 8-SOIC (D, 0.154" / 3.90 mm width)
השווה עם OPA651UB →

OPA651U

✅ Drop-In
Texas Instruments
📦 8-SOIC
Voltage Feedback Operational Amplifier · 1 · 340 V/µs · 470 MHz · 16 ns · 50 mW (typ) · ±4.5 V to ±5.5 V (single 9 V to 11 V) · 4 µA

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

OPA651UB דירוגים מרביים ומאפיינים חשמליים

Amplifier Type Voltage-feedback operational amplifier
Number of Circuits 1 circuit
Bandwidth 470 MHz at gain of 2 V/V
Gain Stability Stable at gains of 2 V/V
Low-Power Consumption 50 mW
Settling Time 16 ns to 0.01%
Harmonic Distortion Low at 5 MHz
Input Bias Current 4 µA
Input Stage True differential input
מארז 8-pin SOIC
Terminal Count 8 terminals
Terminal Form Gull wing
Package Shape Rectangular
Temperature Grade Industrial
טווח טמפרטורת פעולה -40°C to +85°C
סוג הרכבה Surface mount

מדריך תצורת פינים של OPA651UB rectangular

תצורת פינים עבור OPA651UB (מארזת rectangular). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.

תרשים פינים של מארזת rectangular עבור OPA651UB

אין נתוני פריסת פינים מפורטים עבור OPA651UB.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

OPA651UB מתאים עבור 6 יישוםs: High-Speed Instrumentation Front Ends, Precision Active Filters, Waveform Acquisition Systems, Communications Signal Conditioning, Video Support Circuits, Industrial Analog Measurement.

🔧

High-Speed Instrumentation Front Ends

The OPA651UB fits high-speed instrumentation front ends that must amplify small sensor or probe signals while preserving waveform shape. Its 470 MHz bandwidth at a closed-loop gain of 2 V/V and 16 ns settling to 0.01% provide rapid signal response and accurate settling after transitions. The 4 µA input bias current also helps avoid excessive loading of high-impedance sources. Designers should use short, symmetric input and feedback paths, provide effective supply bypassing, and verify that the selected resistor network maintains a stable supported gain.

⚡

Precision Active Filters

OPA651UB is appropriate for wideband active-filter stages requiring controlled gain and fast transient response. Its voltage-feedback architecture supports conventional resistor-defined gain, while stable operation at gain 2 V/V permits useful bandwidth in moderate-gain filter sections. The low-power characteristic of approximately 50 mW can simplify thermal planning in multistage filters. Component tolerances, parasitic capacitance, and op-amp stability around the intended gain must be evaluated so that the nominal 470 MHz bandwidth does not produce unintended peaking or oscillation.

📺

Waveform Acquisition Systems

The OPA651UB can serve as an input amplifier in waveform acquisition systems where rapid recovery and high bandwidth determine how faithfully an input transition is captured. Its 16 ns settling to 0.01% is valuable when the acquisition system must settle after a large input step, while 470 MHz bandwidth at gain 2 supports high-frequency signal paths. For best results, keep the amplifier close to the source, use symmetrical routing, minimize feedback-loop area, and select termination and gain values that preserve stability and avoid clipping.

🌐

Communications Signal Conditioning

OPA651UB supports communications signal-conditioning circuits that need broad bandwidth and low-added distortion. The amplifier operates as a voltage-feedback stage, making it suitable for gain sections, buffers, and linearized paths around modulation or demodulation blocks. Its low harmonic distortion at 5 MHz helps preserve signal quality in multi-carrier systems, while the 4 µA input bias current reduces loading from high-impedance networks. The implementation should include local decoupling and carefully controlled routing because operating close to the amplifier's bandwidth limit magnifies PCB parasitic effects.

📺

Video Support Circuits

OPA651UB can be used in wideband video-support circuitry where signal amplitude must be controlled without severe bandwidth limitation. Its 470 MHz bandwidth at gain 2 V/V and low-power operation of approximately 50 mW provide a useful combination for active gain blocks, line drivers, and cross-point interfaces. Designers should account for the amplifier's high-frequency phase behavior and verify output swing into the intended load. Short video traces, solid ground-plane continuity, and close placement of supply bypass capacitors help maintain predictable performance.

🏭

Industrial Analog Measurement

OPA651UB is suitable for industrial analog-measurement modules operating across the -40°C to +85°C industrial temperature range. Its wide bandwidth handles fast sensor signals, while low input bias current of 4 µA reduces errors when connected to high-impedance sources. The device also supports precision closed-loop gain configurations where 16 ns settling and low harmonic distortion are valuable. Production designs should include input protection, supply filtering, calibration paths, and a PCB layout that separates sensitive input routing from digital and switching-supply nodes.

What is the bandwidth of the OPA651UB?
The OPA651UB provides 470 MHz bandwidth at a closed-loop gain of 2 V/V. According to the manufacturer datasheet, it is a low-power, wideband voltage-feedback operational amplifier designed for high-speed signal processing. The 470 MHz figure applies at gain 2, where the amplifier is explicitly stable, and should not be interpreted as a unity-gain bandwidth specification.
What is OPA651UB and what type of amplifier is it?
OPA651UB is a single-circuit, wideband voltage-feedback operational amplifier in an 8-pin SOIC package. The manufacturer identifies it as a low-power device rated at 50 mW, with a true differential input stage, 470 MHz bandwidth at gain 2 V/V, and 16 ns settling to 0.01%. It is intended for instrumentation and other high-speed analog signal chains.
Where can I download the OPA651UB datasheet PDF?
Download the OPA651UB datasheet PDF from the Texas Instruments product documentation at https://www.ti.com/lit/ds/symlink/opa651.pdf. The document identifies the OPA651 as a wideband, low-power voltage-feedback operational amplifier and provides the detailed connection, performance, and application information needed to verify the 8-SOIC design.
Where can I find the OPA651UB pinout?
Use the pin-description and connection diagrams in the Texas Instruments OPA651 datasheet to identify all eight SOIC terminals. The OPA651UB uses the standard single-amplifier 8-pin SOIC arrangement, including the supply, ground, input, and output functions. Use that diagram when assigning PCB tracks rather than inferring pin positions from package orientation alone.
Is OPA651UB stable at gain 2?
Yes, the OPA651UB is stable at a closed-loop gain of 2 V/V. This stability is one of its defining features and permits use in moderate-gain wideband circuits where a unity-gain-stable device is not required. The minimum practical gain and compensation details should still be checked in the manufacturer application guidance for the selected topology.
What is the settling time of the OPA651UB?
The OPA651UB settles to within 0.01% in 16 ns. According to the manufacturer datasheet, this fast settling behavior accompanies its 470 MHz bandwidth at gain 2. The specification is especially relevant to waveform generation, precision acquisition, and other circuits where rapid recovery after an input transition is more important than minimum gain.
What is the input bias current of OPA651UB?
The OPA651UB has a typical input bias current of 4 µA. According to the manufacturer datasheet, this low bias current helps limit the loading imposed on high-impedance sources. Source impedance, input bias-current cancellation, and offset-voltage error should still be considered together when optimizing measurement accuracy.
OPA651UB vs OPA651U: which is the better choice?
OPA651UB is the catalog ordering designation for the industrial-grade 8-SOIC OPA651 device, while OPA651U is another ordering designation associated with the same base amplifier family. The meaningful choice depends on the required suffix, temperature rating, and approved package form. Confirm the orderable details in the manufacturer datasheet before treating either suffix as a production substitute.
When should I choose OPA651UB over a slower operational amplifier?
Choose OPA651UB when the signal path needs its 470 MHz bandwidth at gain 2 V/V or its 16 ns settling to 0.01%. A lower-bandwidth amplifier may be preferable for low-frequency signals where wideband behavior offers no benefit, because the OPA651UB requires careful high-frequency layout and careful review of gain, load, and stability conditions.
Is OPA651UB suitable for instrumentation and active filters?
OPA651UB is suitable for instrumentation and active-filter front ends because it combines wide bandwidth, low input bias current, and low harmonic distortion. Its true differential input stage supports accurate voltage-feedback operation. The design must use appropriate resistor values, maintain the specified minimum gain, and provide short, symmetric PCB routing.
What is the best drop-in replacement for OPA651UB?
OPA651U is the closest same-family ordering alternative identified for the OPA651 8-pin SOIC device. It is not automatically a drop-in replacement: verify the suffix-specific temperature grade, orderable package, marking, and supply requirements before use. No cross-manufacturer equivalent was established as pin-compatible from the available cross-reference information.
Can OPA651U replace OPA651UB in an existing PCB?
OPA651U can fit the same 8-pin SOIC footprint, but installation requires confirmation of the complete ordering details. The manufacturer lists OPA651U as a 1-circuit, 8-SOIC voltage-feedback amplifier in the same broader OPA651 family. Review the operating-temperature and suffix requirements, then verify the replacement in the intended gain and load configuration.
Where can I buy OPA651UB and check current lead time?
Use the Request a Quote form on this page to request OPA651UB availability, current lead time, and an order quote. The part is identified as an industrial-grade, single-circuit operational amplifier in an 8-pin SOIC package. Confirm the requested suffix and quantity with the supplier before releasing a production order.
What is the price of OPA651UB?
The current OPA651UB price and quantity availability should be obtained through the Request a Quote form on this page. Pricing can vary with order quantity, package form, and lifecycle status, so a current quotation is more useful than a historical catalog value. Include the exact OPA651UB suffix when requesting the quote.
Is OPA651UB in stock and what are its environmental qualifications?
Current stock and lead time for OPA651UB should be confirmed through the Request a Quote form on this page. The device is described as an industrial-grade OPA651 amplifier in an 8-pin SOIC package with an operating range of -40°C to +85°C. Check the current manufacturer product page and declarations for RoHS, REACH, and other qualification status before procurement.

נתוני עזר הנדסיים עבור OPA651UB — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Select OPA651UB when a wideband signal path requires 470 MHz bandwidth at a closed-loop gain of 2 V/V, fast 16 ns settling to 0.01%, and low harmonic distortion. It is especially attractive for high-speed instrumentation, waveform acquisition, active filtering, and communications signal conditioning where signal fidelity and transient response are more important than minimum power or the lowest possible cost. OPA651U is the closest same-family alternative with the same 8-SOIC footprint and core OPA651 performance, but suffix-specific temperature, marking, and orderable requirements should be checked before substitution. For low-frequency precision signals, a lower-bandwidth, lower-noise amplifier may offer better efficiency and easier layout. Any choice of OPA651UB should account for its minimum stable gain, output-load limits, supply bypassing, and the need for short symmetric high-frequency routing.

השוואה עם חלופות

פרמטר מוצר זה OPA651U
Brand Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC - same package
Amplifier Type Voltage-feedback operational amplifier Voltage-feedback operational amplifier
Number of Circuits 1 circuit 1 circuit
Bandwidth 470 MHz at gain of 2 V/V 470 MHz at gain of 2 V/V
Settling Time 16 ns to 0.01% 16 ns to 0.01%
Input Bias Current 4 µA 4 µA
Minimum Stable Gain 2 V/V 2 V/V
Power Consumption 50 mW 50 mW

מבדילים עיקריים

  • High bandwidth at a practical gain setting (לעומתOPA651U)
  • Fast 0.01% settling (לעומתOPA651U)
  • Low input loading (לעומתOPA651U)

הערות תכנון

Use a continuous ground plane and place the OPA651UB close to the source and feedback components. Keep the two input branches similarly routed, avoid long traces around the amplifier, and minimize the loop area between the output and feedback resistor. Parasitic capacitance in a high-bandwidth feedback path can create peaking or instability, so component placement is part of the circuit design rather than a final assembly detail.

Place low-inductance bypass capacitors close to the supply pins and follow the manufacturer datasheet recommendations for the capacitor type and placement. Wideband op-amps require a low-impedance supply path, especially when driving capacitive or resistive loads. Check output-current and output-swing limits for the selected supply voltage, and avoid inductive supply spikes that could cause instability even when the average operating point appears acceptable.

Do not assume that 470 MHz bandwidth at gain 2 V/V means the OPA651UB is unity-gain stable. Configure the feedback network for a supported closed-loop gain and review the datasheet for decompensation and noise-gain details. Also avoid treating the low-power rating as a guarantee that every operating combination is thermally unrestricted; calculate worst-case dissipation from the actual supply voltage, output swing, and load current.

For high-frequency input or output signals, use controlled-impedance routing where practical and terminate unused amplifier outputs according to the application topology. Check component parasitics and probe capacitance because they can alter closed-loop response even when the schematic is correct. Validate gain, phase margin, and settling in the assembled PCB rather than relying only on nominal bandwidth and gain-bandwidth figures.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The device is identified as an industrial-grade operational amplifier. Current RoHS, REACH, lead-free, halogen-free, and conflict-minerals status was not established and should be confirmed from current manufacturer documentation.

הנתונים אומתו בתאריך: 2026-11-19 — נתונים אומתו ונערכו על ידי צוות הנדסת הרכיבים של XAIPART

חיפושים קשורים

OPA651UB datasheet OPA651UB datasheet pdf OPA651UB pinout OPA651UB specifications OPA651UB bandwidth OPA651UB settling time OPA651UB equivalent OPA651UB replacement OPA651UB drop-in replacement OPA651UB vs OPA651U Texas Instruments OPA651UB OPA651UB price OPA651UB stock OPA651UB application circuit OPA651UB 8-SOIC amplifier

רכיבים ומונחים קשורים

Texas Instruments OPA651UB OPA651U Operational Amplifier Voltage-Feedback Amplifier Single-Circuit Amplifier Amplifier IC Low-Power Amplifier Wideband Amplifier True Differential Input Stage 470 MHz Bandwidth 16 ns Settling Time 4 µA Input Bias Current Low Harmonic Distortion Gain of 2 V/V 8-SOIC Package SOIC Surface-Mount Package Instrumentation Amplifier Active Filter Waveform Acquisition Communications Signal Conditioning Video Signal Conditioning Industrial Electronics RoHS REACH
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר