Texas Instruments

PCA9545ADW - 4-Channel I2C/SMBus Switch | Texas Instruments

MPN: PCA9545ADW ✓ Nakahanda
2.3 V to 5.5 V Vdss I2C and SMBus Rds(on) 20-SOIC, 7.50 mm width Package
MOQ: 1 |

PCA9545ADW Ulas

The Texas Instruments PCA9545ADW is a four-channel bidirectional I2C and SMBus translating switch with interrupt logic, reset control, and voltage-level translation, housed in a 20-pin SOIC package. It supports a 2.3 V to 5.5 V operating range and allows one upstream controller to connect to as many as four downstream buses. The switch is controlled through the I2C interface and provides a compact way to isolate bus segments, expand bus capacity, and route controller signals to selected peripheral groups.

An I2C or SMBus switch is an interface IC placed between a bus controller and one or more downstream buses. Its bidirectional translating channels can connect or disconnect selected branches while preserving the serial protocol, clock, and data signaling. The PCA9545A belongs to the broader switching IC, interface IC, and semiconductor hierarchy and is particularly useful when multiple devices share address space, require independent bus segmentation, or need controlled connection to reduce capacitive loading.

The PCA9545A family provides four independently selectable downstream channels, interrupt logic, and a reset function. Voltage translation allows the device to bridge compatible buses operating at different logic levels within its stated 2.3 V to 5.5 V range. These functions support bus expansion, load isolation, address conflict management, and orderly recovery of downstream devices through the reset input. The manufacturer product page identifies the device specifically as a four-channel I2C and SMBus switch with interrupt, reset, and voltage translation.

The switch is controlled through its I2C control port, while four bidirectional channel ports connect the upstream bus to downstream devices. Interrupt logic provides a consolidated indication when activity occurs on a selected downstream bus, and the reset input provides a common recovery mechanism for connected circuitry. Because the channels are bidirectional, each selected path can support command traffic from the controller and responses from remote devices. The PCA9545ADW ordering code specifies the surface-mount 20-SOIC package.

Typical uses include separating multiple I2C sensor groups, expanding access to power-management devices, connecting an embedded controller to several low-power peripherals, and organizing a multi-device industrial or embedded system into separate bus branches. Interrupt support is useful in systems where the main processor should remain idle until a monitored downstream device needs attention. The reset function can help reinitialize devices after a bus fault, provided the system designer confirms that the reset signal and device power states meet the requirements of every connected component.

PCB design should keep the upstream I2C traces short and route each downstream channel as a separate branch to avoid introducing unintended stubs. Pull-up resistors should be placed according to the bus topology and the voltage levels used on each segment. Confirm the address-selection behavior, interrupt polarity, reset timing, and logic-level compatibility of attached devices before finalizing the routing and component configuration.

This product page combines the manufacturer’s device description with application guidance, pin and package references, practical design notes, and drop-in replacement candidates. It is intended to help engineers evaluate the PCA9545ADW for four-channel I2C or SMBus switching, interrupt handling, reset control, bus isolation, and voltage translation without treating packaging or board-layout compatibility as optional details.

Mga alternatibo na pwedeng ilagay na PCA9545ADW — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok PCA9545ADW (parehas na form factor at footprint) — pagkakaiba sa Package.

Texas Instruments
Package: 20-SOIC (0.295 inch, 7.50 mm width)
Ikabit sa PCA9545ADW →

PCA9544ADW

✅ Drop-In
Texas Instruments
📦 20-SOIC
I2C/SMBus multiplexer with interrupt and voltage translation · 4 channels · 2.3 V to 5.5 V · 1 SCL/SDA pair · 4 SCx/SDx pairs · 1-of-4 selection · 4 inputs · Bidirectional translating architecture

Magkontak para sa presyo

Tingnan ang Datasheet →

PCA9546ADWR

✅ Drop-In
📦 20-SOIC
Provides 8 switch channels versus 4 on the PCA9545ADW, a 100% channel-count increase; interrupt and reset integration must be verified.

📋 Alternatibo na Reference (hindi sa katalogo)

PCA9518DW

✅ Drop-In
Texas Instruments
📦 20-SOIC
Expandable five-channel bidirectional I2C/SMBus buffer hub · 5 channels · 3 V to 3.6 V · 400 kHz · I2C and SMBus · Bidirectional · 400 pF · Buffered SDA and SCL groups separated from the upstream bus

Magkontak para sa presyo

Tingnan ang Datasheet →

PCA9545ADW Mga Pinakamataas na Rating at Electrical Characteristics

Number of Channels 4 channels
Operating Voltage Range 2.3 V to 5.5 V
Supported Bus Standards I2C and SMBus
Switch Direction Bidirectional
Integrated Functions Interrupt, reset, and voltage translation
Packhaging 20-SOIC, 7.50 mm width
Uri ng Pagpapasok Surface mount
Bilang ng Pins 20 pins
Tindminan RoHS unknown
REACH Status unknown

Gabay sa Pin Configuration ng PCA9545ADW 20-soic, 7.50 mm width

Pin configuration para sa PCA9545ADW (20-soic, 7.50 mm width package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 20-soic, 7.50 mm width package para sa PCA9545ADW

Wala ng detalyadong pinout data na magagamit para sa PCA9545ADW.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

PCA9545ADW ay nararapat para sa 6 aplikasyons: Multi-Sensor I2C Bus Segmentation, Industrial Controller Peripheral Expansion, Low-Power Sensor Hub, Server Management and Configuration Bus, Communications Module Bus Isolation, Power-Management Device Bus.

🧩

Multi-Sensor I2C Bus Segmentation

The PCA9545ADW fits systems in which several sensors would otherwise share one I2C bus and risk address conflicts or excessive capacitive loading. Its four independently selected channels let the controller connect only the required sensor groups while keeping other branches disconnected. The 2.3 V to 5.5 V operating range supports compatible mixed-voltage systems, while interrupt logic can consolidate peripheral requests. This arrangement simplifies firmware address management and can improve bus organization without requiring four separate switch ICs. Each downstream branch should retain the pull-up arrangement appropriate for its voltage and loading.

🏭

Industrial Controller Peripheral Expansion

An industrial embedded controller can use the PCA9545ADW to connect separate groups of sensors, actuators, and power-management devices without placing every peripheral on one long shared bus. Four switch branches provide a practical partition for equipment with multiple functional subsystems. Interrupt logic helps the controller respond when a downstream device requires attention, and reset control can support coordinated recovery after a fault. The device’s 2.3 V to 5.5 V range is suitable for compatible embedded logic levels, although the manufacturer’s operating-temperature and electrical limits must be checked against the equipment environment.

📱

Low-Power Sensor Hub

The PCA9545ADW is useful in a low-power sensor hub where the main processor should communicate with only one cluster at a time. Opening an unused channel can reduce loading on the upstream bus and keep idle sensor groups isolated until they are needed. The interrupt function provides a way to detect activity on a monitored downstream segment, while the reset function offers a common recovery control. Because the operating range includes 2.3 V to 5.5 V, compatible sensors can be grouped by logic voltage. Verify each branch’s pull-up voltage and ensure that disconnected channels are not expected to retain powered state.

🖥️

Server Management and Configuration Bus

The PCA9545ADW can organize management peripherals in server or data-center equipment by separating configuration, monitoring, and control traffic into distinct I2C branches. This can reduce address conflicts and make bus loading easier to analyze. Interrupt logic is valuable when many managed devices are present because the controller can avoid continuous polling, while reset control can initiate a defined recovery sequence for suitable downstream circuits. The four-channel architecture is appropriate where a limited number of bus segments is needed; a larger channel count may justify PCA9546ADWR. Confirm the logic levels, pull-up strategy, and reset behavior of every attached management device.

🌐

Communications Module Bus Isolation

A communications module can use the PCA9545ADW to separate low-speed configuration buses from other attached subsystems. Four selectable paths allow a host processor to address only the required module section, improving address-space organization and helping isolate bus segments. Voltage translation is useful when compatible connected devices use different logic levels within the supported 2.3 V to 5.5 V range. The interrupt input can report activity from a selected branch, while reset supports controlled recovery when compatible peripheral devices expose a suitable reset path. Routing should keep each branch short and avoid unnecessary test pads or long stubs.

⚡

Power-Management Device Bus

The PCA9545ADW can connect multiple compatible power-management or monitoring ICs through separate I2C branches, reducing the need for duplicate addresses on a single shared segment. Interrupt logic lets a supervisory controller react to requests from a selected power subsystem, and reset control can coordinate recovery for devices that support reset. The compact 20-SOIC package supports conventional surface-mount assembly and separates four downstream paths. Designers should verify that each monitored IC permits the required pull-up arrangement, that the interrupt output remains unambiguous when several branches are active, and that reset timing matches every connected device’s specification.

What is the PCA9545ADW and what does it do?
The PCA9545ADW is a four-channel bidirectional translating switch for I2C and SMBus systems. It lets one upstream controller connect to up to four independently selected downstream buses while adding interrupt handling, reset control, and voltage translation. According to the Texas Instruments manufacturer product page, its operating range is 2.3 V to 5.5 V.
How many I2C or SMBus branches does the PCA9545ADW support?
The PCA9545ADW supports four downstream switch channels. Each channel provides a bidirectional connection between the upstream bus and a separate downstream bus segment. The Texas Instruments manufacturer product page describes the PCA9545A as a four-channel switch, making the PCA9545ADW suitable for partitioning several peripheral groups behind a single host controller.
Where can I download the PCA9545ADW datasheet?
The official Texas Instruments PCA9545A product and datasheet resource is available at https://www.ti.com/product/PCA9545A. The page identifies the device as a 2.3 V to 5.5 V, four-channel I2C and SMBus switch with interrupt, reset, and voltage-translation functions. Use the manufacturer document for ordering information, electrical characteristics, and the authoritative package drawing.
Where can I find the PCA9545ADW pinout?
Use the pin-description table and package drawing in the Texas Instruments PCA9545A manufacturer datasheet for the authoritative PCA9545ADW pin assignment. The verified product information identifies a 20-SOIC package, but it does not enumerate the individual terminal names. Confirm the complete numbered pinout before assigning PCB tracks or connecting pull-up and interrupt circuits.
Does the PCA9545ADW support voltage translation?
Yes, the PCA9545ADW includes voltage translation for compatible I2C or SMBus buses. The Texas Instruments manufacturer product page lists voltage translation among the PCA9545A family’s principal functions, and specifies a 2.3 V to 5.5 V operating range. The voltage levels of each connected segment must still be checked against the device’s detailed operating conditions.
What is the difference between the PCA9545ADW and PCA9544ADW?
The PCA9545ADW includes interrupt logic and reset functions, while the PCA9544ADW comparison identifies a different interrupt and reset feature set. Both devices occupy the SOIC-20 package family and address four-channel I2C or SMBus switching, but the PCA9545ADW is preferable when a consolidated interrupt and common reset path are required.
PCA9545ADW vs PCA9518DW - which is better for bus expansion?
The PCA9545ADW is the better fit when the design specifically requires four switch channels with interrupt and reset functions. The PCA9518DW is described as a five-channel, 3 V to 3.6 V expandable buffer or hub rather than an interchangeable four-channel switch. Its lower operating range and different channel count require a full timing and pin-function review before substitution.
PCA9545ADW vs PCA9546ADWR - which should I choose?
Choose the PCA9545ADW for a four-channel design that requires interrupt and reset functions. The PCA9546ADWR provides more channel capacity, which can simplify a larger bus tree but changes the control and channel count. Because channel population and terminal assignments affect firmware and PCB compatibility, treat it as a design alternative rather than an automatic drop-in replacement.
When should I choose the PCA9545ADW over another I2C switch?
Choose the PCA9545ADW when a controller must connect to four separately controlled bus branches and the design benefits from interrupt consolidation and reset control. It is also appropriate when compatible logic levels require translation. Select another switch when channel count, operating voltage, address behavior, or maximum bus frequency better matches the system.
Is the PCA9545ADW suitable for industrial embedded systems?
The PCA9545ADW is architecturally suitable for embedded systems that partition several I2C or SMBus peripherals behind one controller. Its four selectable branches can reduce address conflicts and isolate busy devices. Industrial suitability still depends on the device’s specified operating temperature, electrical limits, and system reliability requirements, which should be confirmed in the manufacturer datasheet.
What is the best drop-in replacement for the PCA9545ADW?
The closest documented same-package candidates are the PCA9544ADW, PCA9518DW, and PCA9546ADWR, but each changes an important function, channel count, voltage range, or control arrangement. The PCA9545ADW itself is the preferred selection when four channels, interrupt logic, reset control, and voltage translation are required. Validate pin assignments and timing before any substitution.
Can PCA9545ADWR replace PCA9545ADW on the same PCB?
The PCA9545ADWR is a reel-packaging ordering form associated with the PCA9545A family and is not an electrically distinct design. However, a packaging-code variation is not listed as an independent replacement candidate on this page because it adds no distinct engineering alternative. Confirm the ordering codes and reel orientation against the approved manufacturer part record before substitution.
Where can I buy the PCA9545ADW online?
Use the Request a Quote form on this page to request the PCA9545ADW, current commercial terms, and availability. The form is the appropriate channel for a quote-first electronic component order and avoids presenting a static price that may no longer reflect current inventory or volume requirements.
What is the price of the PCA9545ADW?
The current commercial price for the PCA9545ADW is obtained through the Request a Quote form on this page. A fixed price figure would not remain synchronized with quantity, inventory, and supply conditions. Submit the required quantity and packaging information with the request so the quotation reflects the current order configuration.
What is the lead time and stock status for the PCA9545ADW?
Current lead time, minimum order quantity, and stock status should be confirmed through the Request a Quote form on this page. The manufacturer product page confirms the PCA9545A device family, while the exact orderable quantity and timing for PCA9545ADW depend on current procurement conditions and the requested package configuration.

Impormasyon ng Talumpati sa Engineering for PCA9545ADW — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the PCA9545ADW when the system needs four independently selected I2C or SMBus branches and also benefits from interrupt handling, reset control, and voltage translation across compatible 2.3 V to 5.5 V logic levels. Consider the PCA9544ADW when four channels are sufficient and the PCA9545A interrupt and reset functions are not required, but verify its individual electrical and terminal behavior. Consider the PCA9518DW when the design favors a five-channel expandable buffered hub operating from 3 V to 3.6 V. Consider the PCA9546ADWR when eight channels justify the additional control complexity. Because channel count, interrupt behavior, reset behavior, address mapping, and timing can affect both firmware and PCB compatibility, review the manufacturer datasheet for the selected device rather than treating any alternative as an automatic substitute.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto PCA9544ADW PCA9546ADWR PCA9518DW
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 20-SOIC 20-SOIC 20-SOIC 20-SOIC
Number of Channels 4 channels 4 channels 8 channels 5 channels
Supported Buses I2C and SMBus I2C and SMBus I2C and SMBus I2C and SMBus

Pangunahing mga Pagkakaiba

  • Four-channel implementation combines switching, interrupt, and reset functions (kumpara saPCA9544ADW)
  • Broader stated operating-voltage range (kumpara saPCA9518DW)
  • Right-sized channel count for four-branch bus partitioning (kumpara saPCA9546ADWR)

Talaan ng Disenyo

Route the upstream I2C connection directly to the switch and create four short, separate downstream branches. Avoid long stubs, unnecessary test pads, and branch junctions because added capacitance can reduce operating margin at the supported bus rate. Place pull-up resistors where they can serve the intended segment without creating unintended current paths between channels.

Check the manufacturer’s channel on-resistance, capacitance, and timing characteristics against the highest bus rate and total loading for the design. The PCA9545ADW supports a 2.3 V to 5.5 V operating range, but each upstream and downstream segment must still operate at compatible logic levels. Verify the pull-up voltage and the maximum allowable rise time before releasing the layout.

Do not assume the interrupt or reset function can safely drive every attached device. Confirm interrupt polarity, reset pulse width, downstream power state, and whether a device expects an open-drain or actively driven reset. Also verify the PCA9545A control-address behavior in firmware, because an incorrect register write can enable unintended channels or interfere with another device using the same bus.

Provide a continuous ground reference under the SOIC footprint and keep the device close to the upstream controller and bus-branch routing. Separate sensitive downstream branches from noisy power-converter routes even though the PCA9545ADW is not a switching regulator. Proper placement makes channel isolation behavior easier to validate and reduces the effect of unequal branch parasitics.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The verified manufacturer and distributor descriptions do not provide explicit compliance declarations for this ordering code. Compliance must be confirmed from the current manufacturer product documentation before production release.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

PCA9545ADW datasheet PCA9545ADW pinout PCA9545ADW datasheet pdf PCA9545ADW specifications PCA9545ADW equivalent PCA9545ADW replacement PCA9545ADW cross reference PCA9545ADW vs PCA9544ADW PCA9545ADW vs PCA9518DW PCA9545ADW 20-SOIC footprint PCA9545ADW price PCA9545ADW stock Texas Instruments PCA9545ADW PCA9545ADW application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments PCA9545ADW PCA9545A PCA9544ADW PCA9546ADWR PCA9518DW I2C SMBus I2C switch SMBus switch interface IC switching IC semiconductor bidirectional translating switch voltage translation interrupt logic reset function 20-SOIC SOIC package family surface-mount package bus segmentation address conflict avoidance pull-up resistor industrial embedded systems sensor hub
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ