PCA9545ADW - 4-Channel I2C/SMBus Switch | Texas Instruments
料号: PCA9545ADW ✓ 量产中PCA9545ADW 概述
An I2C or SMBus switch is an interface IC placed between a bus controller and one or more downstream buses. Its bidirectional translating channels can connect or disconnect selected branches while preserving the serial protocol, clock, and data signaling. The PCA9545A belongs to the broader switching IC, interface IC, and semiconductor hierarchy and is particularly useful when multiple devices share address space, require independent bus segmentation, or need controlled connection to reduce capacitive loading.
The PCA9545A family provides four independently selectable downstream channels, interrupt logic, and a reset function. Voltage translation allows the device to bridge compatible buses operating at different logic levels within its stated 2.3 V to 5.5 V range. These functions support bus expansion, load isolation, address conflict management, and orderly recovery of downstream devices through the reset input. The manufacturer product page identifies the device specifically as a four-channel I2C and SMBus switch with interrupt, reset, and voltage translation.
The switch is controlled through its I2C control port, while four bidirectional channel ports connect the upstream bus to downstream devices. Interrupt logic provides a consolidated indication when activity occurs on a selected downstream bus, and the reset input provides a common recovery mechanism for connected circuitry. Because the channels are bidirectional, each selected path can support command traffic from the controller and responses from remote devices. The PCA9545ADW ordering code specifies the surface-mount 20-SOIC package.
Typical uses include separating multiple I2C sensor groups, expanding access to power-management devices, connecting an embedded controller to several low-power peripherals, and organizing a multi-device industrial or embedded system into separate bus branches. Interrupt support is useful in systems where the main processor should remain idle until a monitored downstream device needs attention. The reset function can help reinitialize devices after a bus fault, provided the system designer confirms that the reset signal and device power states meet the requirements of every connected component.
PCB design should keep the upstream I2C traces short and route each downstream channel as a separate branch to avoid introducing unintended stubs. Pull-up resistors should be placed according to the bus topology and the voltage levels used on each segment. Confirm the address-selection behavior, interrupt polarity, reset timing, and logic-level compatibility of attached devices before finalizing the routing and component configuration.
This product page combines the manufacturer’s device description with application guidance, pin and package references, practical design notes, and drop-in replacement candidates. It is intended to help engineers evaluate the PCA9545ADW for four-channel I2C or SMBus switching, interrupt handling, reset control, bus isolation, and voltage translation without treating packaging or board-layout compatibility as optional details.
直接替换替代料: PCA9545ADW ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PCA9545ADW (相同外形与封装尺寸) ——差异在于 Package.
PCA9544ADW
✅ 直接替换联系询价
查看数据手册 →PCA9546ADWR
✅ 直接替换📋 参考替代料(不在目录中)
PCA9545ADW 最大额定值与电气特性
| Number of Channels | 4 channels |
| Operating Voltage Range | 2.3 V to 5.5 V |
| Supported Bus Standards | I2C and SMBus |
| Switch Direction | Bidirectional |
| Integrated Functions | Interrupt, reset, and voltage translation |
| 封装 | 20-SOIC, 7.50 mm width |
| 安装类型 | Surface mount |
| 引脚数 | 20 pins |
| RoHS 状态 | unknown |
| REACH Status | unknown |
PCA9545ADW 20-soic, 7.50 mm width 引脚配置指南
PCA9545ADW(20-soic, 7.50 mm width 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: PCA9545ADW.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PCA9545ADW 适用于 6 应用s: Multi-Sensor I2C Bus Segmentation, Industrial Controller Peripheral Expansion, Low-Power Sensor Hub, Server Management and Configuration Bus, Communications Module Bus Isolation, Power-Management Device Bus.
Multi-Sensor I2C Bus Segmentation
The PCA9545ADW fits systems in which several sensors would otherwise share one I2C bus and risk address conflicts or excessive capacitive loading. Its four independently selected channels let the controller connect only the required sensor groups while keeping other branches disconnected. The 2.3 V to 5.5 V operating range supports compatible mixed-voltage systems, while interrupt logic can consolidate peripheral requests. This arrangement simplifies firmware address management and can improve bus organization without requiring four separate switch ICs. Each downstream branch should retain the pull-up arrangement appropriate for its voltage and loading.
推荐
Industrial Controller Peripheral Expansion
An industrial embedded controller can use the PCA9545ADW to connect separate groups of sensors, actuators, and power-management devices without placing every peripheral on one long shared bus. Four switch branches provide a practical partition for equipment with multiple functional subsystems. Interrupt logic helps the controller respond when a downstream device requires attention, and reset control can support coordinated recovery after a fault. The device’s 2.3 V to 5.5 V range is suitable for compatible embedded logic levels, although the manufacturer’s operating-temperature and electrical limits must be checked against the equipment environment.
推荐
Low-Power Sensor Hub
The PCA9545ADW is useful in a low-power sensor hub where the main processor should communicate with only one cluster at a time. Opening an unused channel can reduce loading on the upstream bus and keep idle sensor groups isolated until they are needed. The interrupt function provides a way to detect activity on a monitored downstream segment, while the reset function offers a common recovery control. Because the operating range includes 2.3 V to 5.5 V, compatible sensors can be grouped by logic voltage. Verify each branch’s pull-up voltage and ensure that disconnected channels are not expected to retain powered state.
推荐
Server Management and Configuration Bus
The PCA9545ADW can organize management peripherals in server or data-center equipment by separating configuration, monitoring, and control traffic into distinct I2C branches. This can reduce address conflicts and make bus loading easier to analyze. Interrupt logic is valuable when many managed devices are present because the controller can avoid continuous polling, while reset control can initiate a defined recovery sequence for suitable downstream circuits. The four-channel architecture is appropriate where a limited number of bus segments is needed; a larger channel count may justify PCA9546ADWR. Confirm the logic levels, pull-up strategy, and reset behavior of every attached management device.
推荐
Communications Module Bus Isolation
A communications module can use the PCA9545ADW to separate low-speed configuration buses from other attached subsystems. Four selectable paths allow a host processor to address only the required module section, improving address-space organization and helping isolate bus segments. Voltage translation is useful when compatible connected devices use different logic levels within the supported 2.3 V to 5.5 V range. The interrupt input can report activity from a selected branch, while reset supports controlled recovery when compatible peripheral devices expose a suitable reset path. Routing should keep each branch short and avoid unnecessary test pads or long stubs.
推荐
Power-Management Device Bus
The PCA9545ADW can connect multiple compatible power-management or monitoring ICs through separate I2C branches, reducing the need for duplicate addresses on a single shared segment. Interrupt logic lets a supervisory controller react to requests from a selected power subsystem, and reset control can coordinate recovery for devices that support reset. The compact 20-SOIC package supports conventional surface-mount assembly and separates four downstream paths. Designers should verify that each monitored IC permits the required pull-up arrangement, that the interrupt output remains unambiguous when several branches are active, and that reset timing matches every connected device’s specification.
推荐
推荐产品汇总
工程参考数据: PCA9545ADW ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PCA9544ADW | PCA9546ADWR | PCA9518DW |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-SOIC | 20-SOIC | 20-SOIC | 20-SOIC |
| Number of Channels | 4 channels | 4 channels | 8 channels | 5 channels |
| Supported Buses | I2C and SMBus | I2C and SMBus | I2C and SMBus | I2C and SMBus |
关键差异点
- Four-channel implementation combines switching, interrupt, and reset functions (对比 PCA9544ADW)
- Broader stated operating-voltage range (对比 PCA9518DW)
- Right-sized channel count for four-branch bus partitioning (对比 PCA9546ADWR)
设计说明
Route the upstream I2C connection directly to the switch and create four short, separate downstream branches. Avoid long stubs, unnecessary test pads, and branch junctions because added capacitance can reduce operating margin at the supported bus rate. Place pull-up resistors where they can serve the intended segment without creating unintended current paths between channels.
Check the manufacturer’s channel on-resistance, capacitance, and timing characteristics against the highest bus rate and total loading for the design. The PCA9545ADW supports a 2.3 V to 5.5 V operating range, but each upstream and downstream segment must still operate at compatible logic levels. Verify the pull-up voltage and the maximum allowable rise time before releasing the layout.
Do not assume the interrupt or reset function can safely drive every attached device. Confirm interrupt polarity, reset pulse width, downstream power state, and whether a device expects an open-drain or actively driven reset. Also verify the PCA9545A control-address behavior in firmware, because an incorrect register write can enable unintended channels or interfere with another device using the same bus.
Provide a continuous ground reference under the SOIC footprint and keep the device close to the upstream controller and bus-branch routing. Separate sensitive downstream branches from noisy power-converter routes even though the PCA9545ADW is not a switching regulator. Proper placement makes channel isolation behavior easier to validate and reduces the effect of unequal branch parasitics.
合规信息
The verified manufacturer and distributor descriptions do not provide explicit compliance declarations for this ordering code. Compliance must be confirmed from the current manufacturer product documentation before production release.