Texas Instruments

PCA9546ADW - 4-Channel I2C/SMBus Translating Switch with Reset | Texas Instruments

MPN: PCA9546ADW ✓ Nakahanda
I2C and SMBus Rds(on) 16-pin SOIC (DW) Package
MOQ: 1 |

PCA9546ADW Ulas

The Texas Instruments PCA9546ADW is a quad bidirectional I2C and SMBus translating switch with an integrated reset function. It fans one upstream SCL/SDA pair out to four downstream SCn/SDn channel pairs, and each channel or combination of channels is selected through a programmable I2C control register. The device is offered in a 16-pin SOIC (DW) package.

An I2C or SMBus bus switch, also called a bus multiplexer or fan-out buffer, is an interface IC that lets one controller talk to several targets that share the same SDA and SCL lines. Structurally, the PCA9546ADW sits in the hierarchy of interface ICs: I2C/SMBus switch -> bus multiplexer -> interface controller -> digital IC -> semiconductor. Instead of separate I2C lines running to every sensor or EEPROM, the upstream bus reaches the switch and the switch routes it to only the selected downstream segment.

Key features include four independently selectable downstream channels, bidirectional pass-gate construction, an active-low RESET input that returns the internal I2C-bus state machine to a known condition and deselects all channels, and an internal power-on reset that performs the same function at startup. Two address pins allow several switch devices to coexist on one bus, and the pass-gate structure allows the VDD pin to limit the maximum high voltage that is passed through the channels.

Technically, the part is a state-machine-controlled multiplexer rather than a repeater. The upstream controller writes a control byte that determines which SCn/SDn channels pass the bus. Because the pass gates are bidirectional, the same device can also be used where the direction of the bus flow changes, and the device does not regenerate or re-time the clock signal. The RESET path is the recovery mechanism of choice when a slave holds SDA low after a brown-out and blocks the bus.

Typical uses include multi-sensor measurement hubs, banks of serial EEPROMs, RTC and PMIC fan-out, LED driver arrays, and industrial acquisition boards that must connect several low-voltage I2C devices to one MCU.

A key design consideration is pull-up placement: the upstream pull-ups belong on the controller side, while each downstream segment needs its own pull-ups if the channel is not connected continuously. Confirm the address-strapping resistors and the RESET trace are routed so a system reset also clears the mux state.

This page consolidates the switching function, reset behavior, pin assignment, drop-in alternatives, and practical layout guidance for the PCA9546ADW into one place, and adds engineering context that is not reproduced in the manufacturer datasheet.

Mga alternatibo na pwedeng ilagay na PCA9546ADW — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok PCA9546ADW (parehas na form factor at footprint) — pagkakaiba sa Address Pins, Number of Channels, Package.

NXP Semiconductors
Address Pins: A0, A1, A2 (8 selectable I2C addresses)
Number of Channels: 4 (SC0/SD0 to SC3/SD3)
Package: SOIC-16 (SO16, D suffix)
Ikabit sa PCA9546ADW →

TCA9546ADWR

✅ Drop-In
📦 SOIC-16 (DW)
Same 4-channel bidirectional I2C/SMBus translating switch with reset, same 16-pin DW footprint and pin functions; only the catalog naming differs, so electrical and pin parameters match 100%

📋 Alternatibo na Reference (hindi sa katalogo)

PCA9546AD

✅ Drop-In
NXP Semiconductors
📦 SOIC-16 (D)
4-channel bidirectional I2C/SMBus translating switch · 4 (SC0/SD0 to SC3/SD3) · 2.3 V to 5.5 V · I2C-bus, SMBus · 400 kHz · Active-LOW RESET pin · Programmable control register (writable via I2C) · A0, A1, A2 (8 selectable I2C addresses)

Magkontak para sa presyo

Tingnan ang Datasheet →

PCA9546ADW Mga Pinakamataas na Rating at Electrical Characteristics

Device Type Quad bidirectional I2C/SMBus translating switch
Number of Channels 4 downstream SCn/SDn channels
Upstream Ports 1 (SCL/SDA)
Downstream Ports 4 (SC0/SD0 through SC3/SD3)
Bus Standards Supported I2C and SMBus
Signal Direction Bidirectional
Control Interface I2C-programmable control register
Reset Function Yes - active-low RESET input deselects all channels and resets the I2C-bus state machine
Power-On Reset Yes - internal POR performs the same deselect action at startup
Switch Implementation Pass gates; VDD pin can limit the maximum high voltage passed through the channels
Address Pins 2 address pins (A0/A1) for multi-switch addressing
Packhaging 16-pin SOIC (DW)
Bilang ng Pin 16 pins
Uri ng Pagpapasok Surface mount

Pin Configuration ng PCA9546ADW

SOIC-16 Package Pinout Diagram SOIC-16 16-pin, 3.9x9.9mm, P1.27mm, JEDEC MS-012. 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 SOIC-16
Pin 1 RESET — Active-low reset input; low resets the I2C-bus state machine and deselects all channels
Pin 2 GND — Ground
Pin 3 SCL — Upstream I2C/SMBus clock input
Pin 4 SDA — Upstream I2C/SMBus data input/output
Pin 5 SC0 — Downstream channel 0 clock (bidirectional pass gate)
Pin 6 SD0 — Downstream channel 0 data (bidirectional pass gate)
Pin 7 SC1 — Downstream channel 1 clock (bidirectional pass gate)
Pin 8 SD1 — Downstream channel 1 data (bidirectional pass gate)
Pin 9 SC2 — Downstream channel 2 clock (bidirectional pass gate)
Pin 10 SD2 — Downstream channel 2 data (bidirectional pass gate)
Pin 11 SC3 — Downstream channel 3 clock (bidirectional pass gate)
Pin 12 SD3 — Downstream channel 3 data (bidirectional pass gate)
Pin 13 GND — Ground
Pin 14 VDD — Positive supply; also limits the maximum high voltage passed through the channels
Pin 15 A0 — Address input bit 0
Pin 16 A1 — Address input bit 1

Tipikal na mga Gamit

PCA9546ADW ay nararapat para sa 6 aplikasyons: Multi-Sensor Measurement Hub, Serial EEPROM and Flash Bank Fan-Out, LED Driver Array Control, Real-Time Clock and PMIC Management, Industrial Data Acquisition, Test and Measurement Fixture.

🧩

Multi-Sensor Measurement Hub

The PCA9546ADW lets one microcontroller reach four separate sensor segments over a single upstream SCL/SDA pair, which keeps the host PCB from needing a separate bus header for every sensor. Each downstream SCn/SDn pair can be selected independently, so a firmware scan cycle can enable one segment at a time, read it, and move on, reducing bus capacitance on the active segment and simplifying address planning across four unrelated sensor families. Because the pass gates are bidirectional, the same topology also works when a sensor must drive data back toward the controller. The RESET input gives the hub a clean recovery path if a target holds SDA low after a brown-out, and the internal power-on reset guarantees that no channel is left enabled at startup.

💾

Serial EEPROM and Flash Bank Fan-Out

Banks of serial memories frequently exceed the address budget of one I2C segment, and adding a second microcontroller pin pair for every memory is expensive in routing and board area. The PCA9546ADW resolves this by placing up to four memory banks behind one upstream pair, with each bank enabled by a bit in the control register. Memory buses are strongly pull-up dominated, so the per-segment pull-up arrangement recommended for the PCA9546ADW keeps each bank at its intended rise time rather than sharing a single weak pull-up network with unused stubs. The two address pins also make it practical to combine several switches on one bus when the design needs more than four banks.

💡

LED Driver Array Control

Addressable LED drivers such as the PCA9956 family and similar constant-current drivers commonly share a single command bus, and an LED panel with several driver rows or zones is a natural fit for channel multiplexing. The PCA9546ADW routes the upstream command and data lines to one driver row at a time, which keeps the total device count on the shared bus low and prevents commands intended for one row from appearing on another. Since LED drivers often latch a command and then shift data internally, the bidirectional pass gates of the PCA9546ADW handle both the write and acknowledge phases. Panel designs also benefit from tying RESET to the panel reset line so a newly powered driver group is addressed cleanly.

⏱

Real-Time Clock and PMIC Management

Compact embedded systems often pair a real-time clock, a power management device, and a fuel gauge that all respond to the same I2C address ranges or sit behind separate connectors on different boards. The PCA9546ADW isolates those devices onto discrete downstream segments, so the host processor can address each device unambiguously while still using one bus header to the module. Isolation also stops an unpowered sub-board from back-powering the main rail through the shared lines, which is a common source of brown-out and partial-power failures. The active-low RESET input is useful here as well, because it re-initializes the mux state machine whenever the module is power-cycled.

🏭

Industrial Data Acquisition

Industrial acquisition cards often terminate several remote sensor strings on one board, and each string can sit at a different ground potential or carry its own local controller. The PCA9546ADW lets the card present one upstream SCL/SDA pair to the backplane while routing it to as many as four locally terminated downstream channels. Because the pass-gate structure allows the VDD pin to limit the maximum high voltage that is passed, the switch can be used to add a level of protection to the forwarded bus in designs where the downstream segment is exposed to harsher conditions. The RESET pin doubles as a bus-recovery mechanism when a field-wired target locks up SDA after surge events.

🔧

Test and Measurement Fixture

Automated test fixtures frequently need to reach several DUT straps, buffer amplifiers, or EEPROMs that do not share a common address map, and the fixture controller typically exposes only one I2C header. The PCA9546ADW converts that single header into four independently addressable DUT ports, so the test sequence can select one device at a time and avoid address collisions between instruments and the DUT. The ability to deselect all channels through RESET also helps the fixture establish a known state between test iterations, which shortens measurement setup time and improves repeatability. Because the fixture is a small, adapter-board design, the 16-pin SOIC footprint keeps the adapter routing simple and manufacturable.

Buod ng mga Inirekomendang Produkto

What is the PCA9546ADW?
The PCA9546ADW is a quad bidirectional I2C and SMBus translating switch with a reset function, packaged in a 16-pin SOIC (DW). One upstream SCL/SDA pair fans out to four downstream SCn/SDn channel pairs, and any individual channel or combination of channels is selected by writing a control byte over the I2C bus. According to the Texas Instruments datasheet for the PCA9546A family, the device also provides an active-low RESET input and an internal power-on reset that deselect all channels.
How does the PCA9546ADW reset function work?
Pulling the RESET pin low resets the I2C-bus state machine and deselects all four channels, which clears a stuck bus condition after a brown-out or an interrupted transaction. The internal power-on reset performs the same deselect action automatically at startup, so the switch never comes up in an undefined channel state. The NXP product information for the same PCA9546A device family confirms that RESET low deselects all channels and that the internal power-on reset provides the identical behavior.
Where can I download the PCA9546ADW datasheet PDF?
The PCA9546ADW datasheet is available from the Texas Instruments product documentation and from the indexed datasheet mirror linked on this page. The document covers the full PCA9546A family, including the 4-channel, 16-pin DW package variant, the pin description table, the control-register map, and the absolute maximum ratings. Use the pin description table in the manufacturer datasheet when assigning PCB tracks, because the SOIC-16 pin list carries both the upstream bus pins and the eight downstream channel pins.
Where can I find the PCA9546ADW pinout?
The PCA9546ADW pinout is the 16-pin SOIC (DW) assignment: pin 1 RESET, pin 2 GND, pin 3 SCL upstream, pin 4 SDA upstream, pins 5 to 12 the four downstream pairs SC0/SD0, SC1/SD1, SC2/SD2 and SC3/SD3, pin 13 GND, pin 14 VDD, and pins 15 and 16 the address pins A0 and A1. Confirm every connection against the pin description table in the manufacturer datasheet before layout release.
What can replace the PCA9546ADW?
The closest drop-in replacements are the Texas Instruments TCA9546ADWR, which is the same quad bidirectional translating switch with reset in the same 16-pin SOIC (DW) package, and the NXP Semiconductors PCA9546AD, which implements the identical 4-channel I2C/SMBus translating switch with reset and the same 16-pin SOIC pin count. Because the NXP D-package body is narrower than the TI DW body, confirm your PCB pad geometry and mechanical clearance before treating it as a substitute. Request a Quote on this page for availability and lead time.
Is the PCA9546ADW the same as the TCA9546ADWR?
Yes, the PCA9546ADW and the TCA9546ADWR are the same quad bidirectional I2C and SMBus translating switch with reset, offered in the same 16-pin SOIC (DW) package with the same pin arrangement, so one can replace the other on the same footprint. The naming difference is a manufacturer catalog convention rather than a functional change. The only practical reason to prefer one over the other is availability, qualification status, or device marking requirements on your specific assembly.
PCA9546ADW vs TCA9546ADWR - which should I pick?
Pick whichever is in stock and carries the qualification your program needs, because the two parts share the 16-pin SOIC (DW) footprint, the four bidirectional downstream channels, the active-low RESET input, and the internal power-on reset. There is no electrical or pin-level reason to prefer one. If your supply chain needs a second source, specify the footprint and pinout rather than a single catalog number, and verify the address-pin strapping and reset timing on the part you receive.
PCA9546ADW vs NXP PCA9546AD - is the NXP part a drop-in?
The NXP PCA9546AD is a functionally identical 4-channel I2C/SMBus translating switch with reset and the same 16-pin SOIC pin count and pin function assignment, so it is electrically equivalent. The mechanical difference is the body width: the TI DW package uses the wider SOIC-16 outline while the NXP D package uses the narrower SOIC-16 outline. On boards with generous routing clearance the narrower part often fits, but check pad span, lead length, and courtyard overlap against your existing footprint before committing.
When should I choose the PCA9546ADW over a TCA9546ADWR?
Choose between them based on supply continuity, qualification, and marking rather than function, since both are the same 4-channel bidirectional I2C/SMBus translating switch with reset in the 16-pin SOIC (DW) package. If your BOM already standardizes on the PCA9546A naming, or if a specific approved-vendor list names the PCA9546ADW, keep that part and use the TCA9546ADWR only as a qualified second source. Both require the same upstream and downstream pull-up arrangement.
Is the PCA9546ADW suitable for a multi-sensor measurement hub?
Yes, the PCA9546ADW is a natural fit for a multi-sensor measurement hub because a single upstream I2C bus can fan out to four downstream sensor segments, and each segment can be enabled independently so that only the selected devices respond. Because the pass gates are bidirectional, the same switching structure also works when the direction of bus traffic changes between masters and targets. Add per-channel pull-up resistors on the downstream segments and keep each channel's I2C trace short to preserve signal integrity.
What are the key specifications of the PCA9546ADW that engineers should know?
The PCA9546ADW is a 4-channel bidirectional I2C and SMBus translating switch with reset in a 16-pin SOIC (DW) package. Key points: one upstream SCL/SDA pair fans out to four downstream SCn/SDn pairs; channel selection is programmed through an I2C control register; an active-low RESET input plus an internal power-on reset deselect every channel; two address pins permit several switches on one bus; and the pass-gate structure allows the VDD pin to limit the maximum high voltage passed through the channels.
How should I handle I2C pull-ups around the PCA9546ADW?
Place the upstream pull-up resistors on the controller side of the switch, and provide a separate pull-up pair on each downstream segment that you actually use, because a disabled pass gate isolates that segment from the upstream pull-ups. Keep the pull-ups electrically close to the bus, and avoid long stubs running past the switch into unused channels. This arrangement keeps the rise time within the limits the device is specified for and prevents a disconnected downstream segment from slowing the shared bus edges.
What happens if a downstream I2C device holds SDA low on the PCA9546ADW?
If a target keeps SDA low after a brown-out or an aborted transfer, the upstream bus stalls. Driving the RESET pin low on the PCA9546ADW resets the internal I2C-bus state machine and deselects all four downstream channels, which releases the stuck segment and lets the controller re-address the bus. This recovery path is one of the main reasons to choose a mux with a reset function rather than a plain four-channel switch, and it is also why RESET should be wired to the system reset line in most designs.
Can I use several PCA9546ADW devices on the same I2C bus?
Yes, the PCA9546ADW provides two address pins so that up to four devices with different address strapping can share one upstream I2C bus, each fanning out to its own four downstream channels. Strap the A0 and A1 pins with pull-up or pull-down resistors to the desired addresses, and make sure the total bus capacitance from all connected segments stays within the limits specified for the controller. Give each switch its own RESET connection if you need to isolate them independently.
Where can I buy the PCA9546ADW and what is the lead time?
Use the Request a Quote form on this page to check current availability, pricing and lead time for the PCA9546ADW, and to request the 16-pin SOIC (DW) packing in the quantity your build requires. Because supply for interface multiplexers fluctuates with broad-market component cycles, quote requests that name a target date and quantity are the fastest way to get a firm schedule. The same form can be used for the TCA9546ADWR or the NXP PCA9546AD equivalents if you want a second source.

Impormasyon ng Talumpati sa Engineering for PCA9546ADW — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

The PCA9546ADW is the right choice when your design needs one I2C or SMBus controller to reach four independent downstream segments and you want a reset function for fault recovery and deterministic startup behavior. Reach for the TCA9546ADWR when you prefer the same device under a different catalog name, for example when a second-source approval list names it; the two are interchangeable on the same 16-pin SOIC (DW) footprint. Consider the NXP PCA9546AD when dual-manufacturer sourcing is more valuable than a footprint match, since its D-package body is narrower and needs a pad-span review. If your system needs more than four downstream ports, chain two switches in series instead of adding a higher-channel-count multiplexer, and keep the upstream pull-ups on the controller side with per-segment pull-ups downstream. When the downstream devices sit behind a connector with long traces, validate rise time and crosstalk on the shared segments rather than assuming the mux is transparent.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto TCA9546ADWR PCA9546AD
Package SOIC-16 (DW) SOIC-16 (DW) - same SOIC-16 (D) - narrower body, verify pad span
Brand Texas Instruments Texas Instruments NXP Semiconductors
Number of Channels 4 downstream SCn/SDn channels 4 downstream SCn/SDn channels 4 downstream SCn/SDn channels
Upstream Port 1 (SCL/SDA) 1 (SCL/SDA) 1 (SCL/SDA)
Bus Support I2C and SMBus I2C and SMBus I2C and SMBus
Signal Direction Bidirectional pass gates Bidirectional pass gates Bidirectional pass gates
Reset Function Active-low RESET plus internal power-on reset Active-low RESET plus internal power-on reset Active-low RESET plus internal power-on reset
VDD High-Voltage Limiting of Pass Gates Supported - VDD pin limits the maximum high voltage passed Supported - VDD pin limits the maximum high voltage passed Supported - VDD pin limits the maximum high voltage passed
Address Pins 2 (A0/A1) 2 (A0/A1) 2 (A0/A1)

Pangunahing mga Pagkakaiba

  • Reset input plus internal power-on reset gives a defined mux state and a bus-recovery path (kumpara saPCA9546AD (NXP))
  • Same-family naming consistency with the wider 16-pin SOIC (DW) outline (kumpara saPCA9546AD (NXP))
  • Four independently selectable channels with two address pins for multi-switch systems (kumpara saTCA9546ADWR)

Talaan ng Disenyo

Route the upstream SCL and SDA pair as a short, tightly coupled pair from the controller to pins 3 and 4, and keep each downstream SCn/SDn pair matched in length to its own channel. Do not run downstream stubs past the switch into channels you do not use, because an open stub on a pass-gate segment raises the effective capacitance seen by the upstream driver and slows the rising edge. Where a channel is unused, leave the pins unconnected rather than routing them to a test pad that dangles.

Decouple the VDD pin close to the device with a local ceramic capacitor and return the ground pins (2 and 13) directly to the ground plane rather than through a shared trace. Remember that on this class of device the VDD pin also sets the maximum high voltage that the pass gates will forward, so the supply choice and the bus voltage level of the downstream segment must be consistent. Do not use a VDD value that is lower than the logic high level of the downstream devices you intend to switch to.

The most common integration error is a single shared pull-up network across all four downstream segments. Place pull-ups on the upstream side for the controller bus and a separate pull-up pair on each enabled downstream segment, sized for that segment's capacitance. A second common mistake is ignoring the RESET line: connect it to the system reset so that a brown-out on the downstream rail cannot leave the multiplexer addressing a segment that is no longer powered.

Treat the four downstream segments as four separate buses, not as one large bus, and keep each segment's device population as small as practical so that rise times stay within the limits specified for the controller. When the system must tolerate a downstream fault, remember that RESET de-selects all channels and clears the internal state machine, which releases a segment whose target has latched SDA low; use this as the documented recovery step in the system fault handler rather than power-cycling the whole board.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The interface switch is not an automotive-qualified device, so AEC-Q100 does not apply. RoHS, REACH, lead-free and halogen-free statements were not stated in the manufacturer material captured for this part; confirm the current declarations on the manufacturer product page before release.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

PCA9546ADW PCA9546ADW datasheet PCA9546ADW datasheet pdf PCA9546ADW pinout PCA9546ADW SOIC-16 pinout PCA9546ADW equivalent PCA9546ADW replacement PCA9546ADW vs TCA9546ADWR PCA9546ADW drop-in replacement PCA9546A 4-channel I2C switch with reset PCA9546ADW price PCA9546ADW stock Texas Instruments PCA9546ADW PCA9546ADW I2C multiplexer application PCA9546ADW sensor bus fan-out

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments PCA9546ADW PCA9546A TCA9546ADWR PCA9546AD NXP Semiconductors I2C SMBus bus multiplexer bus switch translating switch interface IC bidirectional pass gate channel select register RESET pin power-on reset (POR) address pins A0/A1 SOIC-16 DW package D package surface mount SMD semiconductor pull-up resistors brown-out recovery
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ