PCM1742KE/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments
MPN: PCM1742KE/2K ✓ NakahandaPCM1742KE/2K Ulas
An audio DAC is a data-converter IC that accepts digital audio samples and generates the corresponding analog voltage waveform. In the broader signal-chain hierarchy, PCM1742 belongs to the digital-to-analog converter family within mixed-signal and audio converter ICs. It supports stereo playback and is intended for digital audio systems requiring a high-resolution conversion stage with separate analog and digital supply domains.
The principal performance features include 24-bit resolution, operation up to 192 kHz, 106 dB SNR, stereo output, and programmable gain. The converter uses I2S-compatible digital audio signaling according to the product listing, while its delta-sigma signal path shapes quantization noise away from the audio passband. The 16-pin SSOP package supports compact implementation in consumer and professional audio equipment.
Internally, the PCM1742 combines two digital-to-analog conversion channels with support circuitry on one CMOS monolithic IC. Fourth-order noise shaping and 8-level amplitude quantization are the defining architectural features of the converter. The manufacturer identifies 192 kHz as the maximum sampling rate for this ordered device, although a distributor description separately lists 200 kHz as a family-level attribute.
Typical uses include CD and DVD player analog-output stages, digital mixing consoles, professional audio equipment, active speaker systems, and consumer audio products with digital S/PDIF or I2S sources. The stereo architecture allows the converter to support left and right channels in a compact circuit while maintaining a high-resolution digital-to-analog playback path.
PCB implementation requires careful handling of the analog and digital supply rails. The PCM1742 supports 5 V analog and 3.3 V digital operation according to the manufacturer's compatibility guidance, so each supply domain should be decoupled near its relevant pins. Output filtering and analog grounding should be designed for the intended audio bandwidth and load.
This product summary combines the device architecture, package characteristics, engineering guidance, confirmed drop-in candidates, and practical design considerations to support faster component selection and PCB planning.
Mga alternatibo na pwedeng ilagay na PCM1742KE/2K — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PCM1742KE/2K (parehas na form factor at footprint) — pagkakaiba sa Package, Digital Audio Interface, Amplitude Quantization, Converter Type, Operating Temperature Range.
PCM1741E/2K
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PCM1748E
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PCM1742KE/2K Mga Pinakamataas na Rating at Electrical Characteristics
| Converter Type | Stereo digital-to-analog converter |
| Bit Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Signal-to-Noise Ratio | 106 dB |
| Architecture | Enhanced multilevel delta-sigma |
| Noise-Shaping Order | Fourth order |
| Amplitude Quantization | 8 levels |
| Number of Audio Channels | 2 channels |
| Digital Audio Interface | I2S |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 3.3 V |
| Process Technology | CMOS |
| Packhaging | 16-pin SSOP |
| Package Height | 1.75 mm |
| Uri ng Pagpapasok | Surface mount |
| Hanay ng Temperature na Operasyon | -25 °C to +85 °C |
| Programmable Gain | Supported |
Gabay sa Pin Configuration ng PCM1742KE/2K 1.75 mm
Pin configuration para sa PCM1742KE/2K (1.75 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa PCM1742KE/2K.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PCM1742KE/2K ay nararapat para sa 6 aplikasyons: CD and DVD Player Audio Output, Professional Digital Mixing Console, Active Speaker and Amplifier Interface, Digital Audio Interface Module, Consumer AV Receiver, High-Resolution Headphone DAC.
CD and DVD Player Audio Output
PCM1742KE/2K fits the final digital-to-analog stage of a CD or DVD player because it converts two digital audio channels at up to 192 kHz and provides a 106 dB SNR. The converter accepts an I2S-style digital stream and produces stereo analog outputs for the player’s line-output circuitry. Its 5 V analog and 3.3 V digital supply domains should be separated with local decoupling so switching activity on the digital side does not disturb the analog output. An appropriate reconstruction or smoothing filter is still required after the DAC outputs, and its cutoff and group-delay characteristics should be selected according to the intended playback bandwidth.
Inirekomenda
Professional Digital Mixing Console
The PCM1742KE/2K can provide a high-resolution stereo monitoring or auxiliary output in a digital mixing console. Its 24-bit conversion, operation up to 192 kHz, and 106 dB SNR suit professional playback paths, while the two-channel architecture simplifies pairing with a digital mixer output. The device should receive a stable clock and compliant I2S data from the console’s audio processor. Keep the SSOP-16 footprint compact, but maintain separation between digital clock traces and analog output routing to prevent edge-related noise from degrading the reconstruction stage.
Inirekomenda
Active Speaker and Amplifier Interface
PCM1742KE/2K is appropriate for the digital-to-analog section of an active speaker when the source controller supplies I2S audio. Its 192 kHz capability and 106 dB SNR preserve a broad dynamic range before the signal reaches a power amplifier. The converter’s stereo outputs can feed a balanced or unbalanced input network, subject to the output swing and loading requirements of the chosen amplifier. Component layout should prioritize a quiet analog ground region and short output paths, because long traces or poorly decoupled supply rails can compromise the converter’s dynamic performance even when the digital interface operates correctly.
Inirekomenda
Digital Audio Interface Module
A compact digital audio interface can use PCM1742KE/2K to add a stereo analog output to an embedded audio processor. The 16-pin SSOP package limits board area, while the converter supports up to 192 kHz and includes programmable gain for output-level adjustment. Firmware must configure the source processor to provide the matching sample rate, bit depth, clocking, and I2S framing expected by the DAC. Both supply domains require dedicated local bypass capacitors, and unused analog and digital inputs should follow the manufacturer’s termination guidance to avoid unnecessary noise or power-consumption penalties.
Inirekomenda
Consumer AV Receiver
PCM1742KE/2K can serve as a stereo DAC in a consumer audio-visual receiver or network audio player. The 24-bit resolution and 106 dB SNR support quality-conscious playback channels, while 192 kHz operation benefits high-rate source material. The digital source must deliver valid I2S data and a stable master clock, and the converter should be positioned close enough to the analog output network to minimize susceptible trace length. Separate 5 V analog and 3.3 V digital supplies reduce coupling between the receiver’s digital processing and the stereo reconstruction outputs.
Inirekomenda
High-Resolution Headphone DAC
The PCM1742KE/2K can form the converter stage of a high-resolution headphone DAC when a low-noise analog output amplifier follows the stereo DAC outputs. Its 24-bit resolution and 106 dB SNR provide a suitable source for the headphone amplifier, while programmable gain assists output-level matching. The design should avoid adding excessive analog gain after the converter, as that can magnify noise and distortion. Use a symmetrical ground arrangement around the analog output network, short feedback paths, and supply bypassing that preserves the separation between the 5 V analog and 3.3 V digital domains.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PCM1742KE/2K — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PCM1741E/2K | PCM1748 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-16 | SSOP-16 | SSOP-16 |
| Converter Type | Stereo DAC | Stereo DAC | Stereo DAC |
Pangunahing mga Pagkakaiba
- Higher confirmed maximum sampling rate than the listed PCM1741E/2K candidate (kumpara saPCM1741E/2K)
- Explicit 106 dB SNR specification (kumpara saPCM1748)
- Enhanced multilevel conversion architecture with defined quantization structure (kumpara saPCM1741E/2K)
Talaan ng Disenyo
Place the bypass capacitors for the 5 V analog and 3.3 V digital supplies at their corresponding pins, with short return paths to the device ground. Keep digital clock and I2S routing away from the analog outputs. The PCM1742 uses separate analog and digital supply domains, so connecting both domains to a single poorly filtered rail can allow converter activity to couple into the analog output path.
Route the master clock and I2S data as short, continuous traces, and provide a low-impedance ground reference close to the converter. Avoid routing digital signals beneath the analog output network. Verify the supported clock mode and sample-rate relationship from the manufacturer datasheet, since incorrect clocking can produce invalid conversion data even when the serial interface wiring is physically correct.
Do not treat a shared SSOP-16 footprint as proof that every PCM-family converter is functionally interchangeable. Confirm register addresses, reset behavior, mute logic, digital-filter modes, supported sampling rates, and output scaling for the selected alternative. A replacement should be approved only after the digital timing and analog-output expectations have been checked against both datasheets.
Keep the analog output traces short and place the associated reconstruction or smoothing components close to the converter outputs. Maintain a quiet analog-ground region beneath and around the SSOP-16 while separating it from digital return currents. If the design uses balanced outputs, keep the two channels symmetrical so conversion error and ground disturbance are not transformed into channel imbalance.
Impormasyon ng Pagsunod sa Kautusan
The available product information identifies a commercial operating-temperature range of -25 °C to +85 °C but does not state AEC-Q100 qualification or the requested environmental declarations. Current declarations should be confirmed with Texas Instruments.