PCM1742KE/2K - 24-Bit 192kHz Stereo DAC | Texas Instruments
料号: PCM1742KE/2K ✓ 量产中PCM1742KE/2K 概述
An audio DAC is a data-converter IC that accepts digital audio samples and generates the corresponding analog voltage waveform. In the broader signal-chain hierarchy, PCM1742 belongs to the digital-to-analog converter family within mixed-signal and audio converter ICs. It supports stereo playback and is intended for digital audio systems requiring a high-resolution conversion stage with separate analog and digital supply domains.
The principal performance features include 24-bit resolution, operation up to 192 kHz, 106 dB SNR, stereo output, and programmable gain. The converter uses I2S-compatible digital audio signaling according to the product listing, while its delta-sigma signal path shapes quantization noise away from the audio passband. The 16-pin SSOP package supports compact implementation in consumer and professional audio equipment.
Internally, the PCM1742 combines two digital-to-analog conversion channels with support circuitry on one CMOS monolithic IC. Fourth-order noise shaping and 8-level amplitude quantization are the defining architectural features of the converter. The manufacturer identifies 192 kHz as the maximum sampling rate for this ordered device, although a distributor description separately lists 200 kHz as a family-level attribute.
Typical uses include CD and DVD player analog-output stages, digital mixing consoles, professional audio equipment, active speaker systems, and consumer audio products with digital S/PDIF or I2S sources. The stereo architecture allows the converter to support left and right channels in a compact circuit while maintaining a high-resolution digital-to-analog playback path.
PCB implementation requires careful handling of the analog and digital supply rails. The PCM1742 supports 5 V analog and 3.3 V digital operation according to the manufacturer's compatibility guidance, so each supply domain should be decoupled near its relevant pins. Output filtering and analog grounding should be designed for the intended audio bandwidth and load.
This product summary combines the device architecture, package characteristics, engineering guidance, confirmed drop-in candidates, and practical design considerations to support faster component selection and PCB planning.
直接替换替代料: PCM1742KE/2K ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: PCM1742KE/2K (相同外形与封装尺寸) ——差异在于 Package, Digital Audio Interface, Amplitude Quantization, Converter Type, Operating Temperature Range.
PCM1741E/2K
✅ 直接替换📋 参考替代料(不在目录中)
PCM1742KE/2K 最大额定值与电气特性
| Converter Type | Stereo digital-to-analog converter |
| Bit Resolution | 24 bit |
| Maximum Sampling Rate | 192 kHz |
| Signal-to-Noise Ratio | 106 dB |
| Architecture | Enhanced multilevel delta-sigma |
| Noise-Shaping Order | Fourth order |
| Amplitude Quantization | 8 levels |
| Number of Audio Channels | 2 channels |
| Digital Audio Interface | I2S |
| Analog Supply Voltage | 5 V |
| Digital Supply Voltage | 3.3 V |
| Process Technology | CMOS |
| 封装 | 16-pin SSOP |
| Package Height | 1.75 mm |
| 安装类型 | Surface mount |
| 工作温度范围 | -25 °C to +85 °C |
| Programmable Gain | Supported |
PCM1742KE/2K 1.75 mm 引脚配置指南
PCM1742KE/2K(1.75 mm 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: PCM1742KE/2K.
请参阅 数据手册 以查看完整引脚配置。
典型应用
PCM1742KE/2K 适用于 6 应用s: CD and DVD Player Audio Output, Professional Digital Mixing Console, Active Speaker and Amplifier Interface, Digital Audio Interface Module, Consumer AV Receiver, High-Resolution Headphone DAC.
CD and DVD Player Audio Output
PCM1742KE/2K fits the final digital-to-analog stage of a CD or DVD player because it converts two digital audio channels at up to 192 kHz and provides a 106 dB SNR. The converter accepts an I2S-style digital stream and produces stereo analog outputs for the player’s line-output circuitry. Its 5 V analog and 3.3 V digital supply domains should be separated with local decoupling so switching activity on the digital side does not disturb the analog output. An appropriate reconstruction or smoothing filter is still required after the DAC outputs, and its cutoff and group-delay characteristics should be selected according to the intended playback bandwidth.
推荐
Professional Digital Mixing Console
The PCM1742KE/2K can provide a high-resolution stereo monitoring or auxiliary output in a digital mixing console. Its 24-bit conversion, operation up to 192 kHz, and 106 dB SNR suit professional playback paths, while the two-channel architecture simplifies pairing with a digital mixer output. The device should receive a stable clock and compliant I2S data from the console’s audio processor. Keep the SSOP-16 footprint compact, but maintain separation between digital clock traces and analog output routing to prevent edge-related noise from degrading the reconstruction stage.
推荐
Active Speaker and Amplifier Interface
PCM1742KE/2K is appropriate for the digital-to-analog section of an active speaker when the source controller supplies I2S audio. Its 192 kHz capability and 106 dB SNR preserve a broad dynamic range before the signal reaches a power amplifier. The converter’s stereo outputs can feed a balanced or unbalanced input network, subject to the output swing and loading requirements of the chosen amplifier. Component layout should prioritize a quiet analog ground region and short output paths, because long traces or poorly decoupled supply rails can compromise the converter’s dynamic performance even when the digital interface operates correctly.
推荐
Digital Audio Interface Module
A compact digital audio interface can use PCM1742KE/2K to add a stereo analog output to an embedded audio processor. The 16-pin SSOP package limits board area, while the converter supports up to 192 kHz and includes programmable gain for output-level adjustment. Firmware must configure the source processor to provide the matching sample rate, bit depth, clocking, and I2S framing expected by the DAC. Both supply domains require dedicated local bypass capacitors, and unused analog and digital inputs should follow the manufacturer’s termination guidance to avoid unnecessary noise or power-consumption penalties.
推荐
Consumer AV Receiver
PCM1742KE/2K can serve as a stereo DAC in a consumer audio-visual receiver or network audio player. The 24-bit resolution and 106 dB SNR support quality-conscious playback channels, while 192 kHz operation benefits high-rate source material. The digital source must deliver valid I2S data and a stable master clock, and the converter should be positioned close enough to the analog output network to minimize susceptible trace length. Separate 5 V analog and 3.3 V digital supplies reduce coupling between the receiver’s digital processing and the stereo reconstruction outputs.
推荐
High-Resolution Headphone DAC
The PCM1742KE/2K can form the converter stage of a high-resolution headphone DAC when a low-noise analog output amplifier follows the stereo DAC outputs. Its 24-bit resolution and 106 dB SNR provide a suitable source for the headphone amplifier, while programmable gain assists output-level matching. The design should avoid adding excessive analog gain after the converter, as that can magnify noise and distortion. Use a symmetrical ground arrangement around the analog output network, short feedback paths, and supply bypassing that preserves the separation between the 5 V analog and 3.3 V digital domains.
推荐
推荐产品汇总
工程参考数据: PCM1742KE/2K ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | PCM1741E/2K | PCM1748 |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | SSOP-16 | SSOP-16 | SSOP-16 |
| Converter Type | Stereo DAC | Stereo DAC | Stereo DAC |
关键差异点
- Higher confirmed maximum sampling rate than the listed PCM1741E/2K candidate (对比 PCM1741E/2K)
- Explicit 106 dB SNR specification (对比 PCM1748)
- Enhanced multilevel conversion architecture with defined quantization structure (对比 PCM1741E/2K)
设计说明
Place the bypass capacitors for the 5 V analog and 3.3 V digital supplies at their corresponding pins, with short return paths to the device ground. Keep digital clock and I2S routing away from the analog outputs. The PCM1742 uses separate analog and digital supply domains, so connecting both domains to a single poorly filtered rail can allow converter activity to couple into the analog output path.
Route the master clock and I2S data as short, continuous traces, and provide a low-impedance ground reference close to the converter. Avoid routing digital signals beneath the analog output network. Verify the supported clock mode and sample-rate relationship from the manufacturer datasheet, since incorrect clocking can produce invalid conversion data even when the serial interface wiring is physically correct.
Do not treat a shared SSOP-16 footprint as proof that every PCM-family converter is functionally interchangeable. Confirm register addresses, reset behavior, mute logic, digital-filter modes, supported sampling rates, and output scaling for the selected alternative. A replacement should be approved only after the digital timing and analog-output expectations have been checked against both datasheets.
Keep the analog output traces short and place the associated reconstruction or smoothing components close to the converter outputs. Maintain a quiet analog-ground region beneath and around the SSOP-16 while separating it from digital return currents. If the design uses balanced outputs, keep the two channels symmetrical so conversion error and ground disturbance are not transformed into channel imbalance.
合规信息
The available product information identifies a commercial operating-temperature range of -25 °C to +85 °C but does not state AEC-Q100 qualification or the requested environmental declarations. Current declarations should be confirmed with Texas Instruments.