PI7C9X1170CZDEX I2C/SPI to UART Bridge | Diodes
MPN: PI7C9X1170CZDEX ✓ NakahandaPI7C9X1170CZDEX Ulas
An interface bridge is a semiconductor that translates the signaling and transaction format of one communication interface into that of another. In the system hierarchy, the PI7C9X1170 belongs to interface ICs, serial interface controllers, and protocol converters. It sits between a host controller and a UART peripheral, reducing the need for host software to emulate the remote protocol while preserving a conventional serial connection at the other side of the link.
The PI7C9X1170CZDEX uses two-wire I2C signaling with serial data on SDA and serial clock on SCL. According to the manufacturer datasheet, the I2C interface supports Standard-mode and Fast-mode I2C-bus operation. The same device also provides an SPI interface for host-side communication, giving the system designer two possible host-bus paths while presenting a UART interface to the target peripheral.
The 24-TQFN package measures 4 x 4 mm and supports compact surface-mount assembly. Its leadless construction reduces the PCB footprint compared with larger leaded interface packages, although exposed-pad thermal management and assembly process controls remain important. The CZDEX ordering code is associated with tape-and-reel production packaging, and distributor product information identifies a standard quantity of 3,500 units.
Typical uses include industrial control modules, programmable logic controllers, embedded test equipment, communication adapters, and peripheral boards that need to bridge a host-controller bus to a UART device. The bridge can simplify hardware partitioning when the UART endpoint is already available and the host operates through I2C or SPI. System compatibility still depends on the device-specific commands, electrical levels, signal mapping, and timing configuration described in the manufacturer documentation.
PCB planning should follow the manufacturer pin-description and layout guidance, particularly for power, ground, I2C pull-up requirements, and the exposed thermal pad. Confirm the exact pin functions and package drawing before routing. Do not assume that every I2C or SPI peripheral can be connected without checking the bridge's supported command set and electrical interface requirements.
This page organizes the PI7C9X1170CZDEX interface details, verified package information, sourcing workflow, and practical implementation guidance. It also separates confirmed manufacturer characteristics from electrical parameters that require confirmation from the datasheet, helping engineers move from component selection to a careful hardware review.
Mga alternatibo na pwedeng ilagay na PI7C9X1170CZDEX — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboPI7C9X1170CZDEX Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | I2C/SPI-to-UART interface bridge |
| Host Interfaces | I2C and SPI |
| Peripheral Interface | UART |
| I2C Compliance | Standard-mode and Fast-mode I2C-bus specifications |
| I2C Signal Lines | 2 lines: SDA and SCL |
| Package Type | 24-pin TQFN |
| Package Dimensions | 4 x 4 mm |
| Total Pins | 24 pins |
| Uri ng Pagpapasok | Surface mount |
| Shipping Package | Tape and reel |
| Standard Packaging Quantity | 3,500 units |
Gabay sa Pin Configuration ng PI7C9X1170CZDEX tape and reel
Pin configuration para sa PI7C9X1170CZDEX (tape and reel package). Ang power device na ito ay may gate, drain, at source terminals. Para sa mga non-polarized package, sumangguni sa datasheet ng manufacturer para sa eksaktong oryentasyon ng pin 1 at mga detalye ng footprint. Kasama sa mga karaniwang aplikasyon ang disenyo ng power supply, motor driving, at load switching.
Wala ng detalyadong pinout data na magagamit para sa PI7C9X1170CZDEX.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PI7C9X1170CZDEX ay nararapat para sa 6 aplikasyons: Industrial Control Module, Programmable Logic Controller, Communication Adapter, Embedded Test Equipment, Programmable Peripheral Board, Portable Instrumentation Interface.
Industrial Control Module
The PI7C9X1170CZDEX fits industrial control modules that use a host processor for supervisory functions while retaining a UART-based local peripheral. Place the bridge between the controller's I2C or SPI bus and the UART endpoint so the main processor can exchange commands without implementing a complete UART protocol state machine. Its Standard-mode and Fast-mode I2C support provides defined host-side operating options. The 4 x 4 mm TQFN package also preserves board area in densely populated control hardware. Before layout release, verify the required UART signal mapping, supported device commands, logic levels, and exposed-pad connection from the manufacturer datasheet.
Programmable Logic Controller
The PI7C9X1170CZDEX is applicable in programmable logic controller designs where the main controller uses I2C or SPI but an expansion module retains a conventional UART connection. The dedicated bridge provides a defined translation path from the host interface to the UART peripheral, reducing the protocol logic burden placed on the main processor. This can simplify firmware partitioning while retaining a recognizable host-to-peripheral architecture. The 24-pin TQFN construction supports compact control boards, although exposed-pad routing and manufacturing controls must follow the package drawing. Confirm register behavior, timing, supply requirements, and UART configuration before integrating it into a safety- or production-critical controller.
Communication Adapter
The PI7C9X1170CZDEX can serve as the protocol-conversion element in a communication adapter that accepts commands through I2C or SPI and forwards them to a UART-connected module. This arrangement is useful when the adapter's host already has a bus-oriented processor interface but the remote module exposes only a serial UART port. The bridge's two-wire I2C path uses SDA and SCL, with Standard-mode and Fast-mode operation specified by the manufacturer. Its compact 4 x 4 mm TQFN package allows the adapter to remain compact. Designers should still validate address handling, command support, UART baud configuration, signal levels, and timing against the device documentation before field deployment.
Embedded Test Equipment
The PI7C9X1170CZDEX fits embedded test and measurement equipment where a controller needs to access a UART-based instrument or peripheral through I2C or SPI. The dedicated bridge allows the instrument interface to remain UART while the control plane uses the processor's preferred bus. This can make the test fixture easier to standardize and reduce repetitive low-level protocol handling in the main controller firmware. The 24-pin surface-mount package supports compact instrument electronics, and the manufacturer's stated I2C support includes Standard-mode and Fast-mode operation. Confirm the supported command subset, timing limits, electrical levels, and exposed-pad layout before integrating the device into automated test systems.
Programmable Peripheral Board
The PI7C9X1170CZDEX is appropriate for programmable peripheral boards that expose an I2C or SPI host interface while retaining UART connectivity to an established subsystem. A system designer can isolate the UART protocol behavior behind the bridge, allowing the host controller to focus on measurement, control, or user-interface functions. The compact 24-pin TQFN package limits the footprint required for this interface translation. For reliable deployment, review the manufacturer's pin description, supported bus modes, and timing requirements, and ensure that the PCB provides the required power, ground, pull-up, and thermal-pad connections. Validate the complete command exchange with the intended peripheral before production.
Portable Instrumentation Interface
The PI7C9X1170CZDEX can support portable instrumentation interfaces where limited board area makes a dedicated serial bridge attractive. A portable controller using I2C or SPI can communicate with a UART-based sensor, logger, or service module through the 4 x 4 mm TQFN bridge. The device's two-wire I2C path and documented Standard-mode and Fast-mode compliance help establish a predictable host connection, while the alternate SPI path gives designers another integration option. The package saves space compared with a conventional leaded bridge. Before finalizing a portable design, confirm supply voltage, operating temperature, signal-level compatibility, UART behavior, and thermal management, since those qualifications are essential for reliable field operation.
Impormasyon ng Talumpati sa Engineering for PI7C9X1170CZDEX — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Package | 24-pin TQFN (4 x 4 mm) |
| Brand | Diodes Incorporated |
| Device Type | I2C/SPI-to-UART interface bridge |
| Host Interfaces | I2C and SPI |
| Peripheral Interface | UART |
| I2C Mode Support | Standard-mode and Fast-mode |
| I2C Signal Lines | 2 lines: SDA and SCL |
| Total Pins | 24 pins |
| Package Dimensions | 4 x 4 mm |
| Shipping Package | Tape and reel |
| Standard Packaging Quantity | 3,500 units |
Pangunahing mga Pagkakaiba
- Three-interface integration in one bridge (kumpara saConventional two-wire UART transceiver)
- Documented Standard-mode and Fast-mode I2C support (kumpara saSingle-mode I2C interface bridge)
- Compact 24-pin TQFN implementation (kumpara saLead-interface bridge in a larger package)
Talaan ng Disenyo
Route SDA and SCL as short, compact traces and place any required pull-up resistors close to the bus master or the appropriate bus endpoint. Keep the bridge's ground and supply connections close to their pins, and connect the TQFN exposed pad according to the manufacturer layout guidance. Do not assign the pin functions until the complete 24-pin description and package drawing have been cross-checked.
Treat the exposed thermal pad as both a thermal and electrical structure. Follow the datasheet's recommended pad geometry, via arrangement, solder-mask policy, and copper connection. A 4 x 4 mm TQFN leaves limited room around the perimeter, so placing bypass capacitors and pull-up networks requires coordination with the pinout. Review assembly drawings to avoid conflicts between exposed-pad vias and no-stencil regions.
Do not assume that any UART peripheral can be substituted for the supported endpoint without checking protocol, register, baud-rate, framing, and electrical-level requirements. Standard-mode and Fast-mode descriptions apply to the I2C side and do not by themselves guarantee every timing condition of the overall design. Validate startup behavior, bus contention, communication errors, and the manufacturer's recommended decoupling before releasing a production layout.
Impormasyon ng Pagsunod sa Kautusan
Current compliance declarations were not identified in the manufacturer or distributor information for this listing. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status with the manufacturer before production release.