Diodes Incorporated

PI7C9X118SLFDEX - PCIe-to-PCI Bridge | Diodes Incorporated

MPN: PI7C9X118SLFDEX ✓ Nakahanda
128-LQFP with exposed pad Package 66 MHz Speed
MOQ: 1 |

PI7C9X118SLFDEX Ulas

Diodes Incorporated PI7C9X118SLFDEX is a PCIe-to-PCI bridge interface IC that translates one PCI Express x1 link into a 32-bit, 66 MHz PCI bus. It is packaged in a 128-terminal, 14 x 14 mm low-profile quad flat package with an exposed pad. The SlimLine family is engineered for systems that need to add a conventional PCI interface to a compact PCI Express design while preserving a small board footprint.

A PCI Express-to-PCI bridge belongs to the interface IC category and sits between high-speed serial computer buses and older parallel peripheral buses. PCIe uses serial point-to-point links, while the PCI side of this device exposes the legacy parallel bus. This bridge allows desktop, workstation, ultra-mobile, and system-module architectures to retain compatibility with PCI peripherals without implementing a separate host adapter.

The PI7C9X118SL is performance tuned for x1 PCI Express to 32-bit/66 MHz PCI bridging and is positioned for low-power, space-constrained systems. Its stated 128-LQFP package includes an exposed thermal pad, providing a large-area connection for heat dissipation on multilayer PCBs. The FDEX ordering suffix identifies the specific leaded LQFP package and exposed-pad configuration used in this listing.

The component is used as a bus-interface controller rather than as a general-purpose processor, memory device, or transceiver. Its primary design task is protocol conversion, clocking, buffering, and arbitration between the PCI Express endpoint-facing interface and the legacy PCI bus. System firmware and operating-system support remain necessary for a complete bridge implementation, and board-level validation should confirm timing, power sequencing, and peripheral compatibility.

Typical uses include PCI Express system modules, industrial and embedded controller platforms, workstation peripherals, legacy PCI expansion systems, and compact computers requiring an x1-to-conventional-PCI pathway. In these applications, the exposed-pad package helps remove heat from the bridge during sustained transfer activity, while the 14 x 14 mm outline preserves more board area than a larger discrete bridge solution.

Designers should follow the manufacturer's pin-description table and reference design when assigning the 128 package terminals, configuring local signals, and connecting the exposed pad. Input, output, power, ground, clock, and differential PCI Express routing must follow the exact pin definitions and recommended layout constraints to avoid signal-integrity or protocol-compliance problems.

This page consolidates the verified device identity, package information, bridge function, lifecycle sourcing information, and practical implementation guidance. It also distinguishes documented characteristics from parameters that require confirmation from the manufacturer datasheet, helping engineers plan the board-level review without assuming electrical or timing values that are not established.

Mga alternatibo na pwedeng ilagay na PI7C9X118SLFDEX — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

PI7C9X118SLFDEX Mga Pinakamataas na Rating at Electrical Characteristics

Device Type PCI Express-to-PCI bridge interface IC
PCI Express Interface x1 PCI Express
Conventional PCI Interface 32-bit/66 MHz PCI
PCI Data Width 32 bit
PCI Maximum Clock 66 MHz
Package Type 128-LQFP with exposed pad
Package Dimensions 14 x 14 mm
Terminal Count 128 terminals
Package Code HLFQFP
Package Shape Square
Terminal Form Gull wing
Uri ng Pagpapasok Surface mount
Temperature Grade Commercial extended
Tindminan RoHS Compliant
PCI Express Lane Width x1

Gabay sa Pin Configuration ng PI7C9X118SLFDEX square

Pin configuration para sa PI7C9X118SLFDEX (square package). Ang power device na ito ay may gate, drain, at source terminals. Para sa mga non-polarized package, sumangguni sa datasheet ng manufacturer para sa eksaktong oryentasyon ng pin 1 at mga detalye ng footprint. Kasama sa mga karaniwang aplikasyon ang disenyo ng power supply, motor driving, at load switching.

Pinout diagram ng square package para sa PI7C9X118SLFDEX

Wala ng detalyadong pinout data na magagamit para sa PI7C9X118SLFDEX.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

PI7C9X118SLFDEX ay nararapat para sa 6 aplikasyons: Compact PCI Express System Modules, Legacy PCI Peripheral Expansion, Workstation PCI Compatibility, Industrial Embedded Controller Platforms, Ultra-Mobile Expansion Platforms, PCI Express Test and Measurement.

🖥️

Compact PCI Express System Modules

The PI7C9X118SLFDEX fits compact system modules that expose one PCI Express x1 link but must support a conventional PCI device. It performs the bridge function between the serial x1 PCI Express interface and the 32-bit/66 MHz PCI side, allowing a module designer to retain legacy expansion without implementing a separate PCI controller. Its 14 x 14 mm, 128-terminal LQFP package with exposed pad supports dense layouts, while the exposed-pad connection provides a practical thermal path on multilayer PCBs. System-level validation should include reference-clock behavior, power sequencing, firmware support, and the timing requirements of every peripheral attached to the PCI bus.

🔧

Legacy PCI Peripheral Expansion

The PI7C9X118SLFDEX is useful when a modern PCI Express host must connect to an established 32-bit/66 MHz PCI peripheral. The bridge places the PCI Express and conventional PCI interfaces behind one dedicated controller, reducing the need for discrete interface logic on the motherboard. Because this is a protocol and timing boundary, the selected peripheral must be checked against the bridge timing, arbitration, configuration, and clock requirements in the manufacturer documentation. Board layout should reserve the full 128-terminal footprint, continuous reference-clock routing, and the prescribed exposed-pad thermal structure. Firmware must also enumerate and configure the bridged PCI device correctly.

🖥️

Workstation PCI Compatibility

Workstation and desktop platforms can use the PI7C9X118SLFDEX to retain compatibility with conventional PCI expansion while adopting PCI Express host connectivity. The x1 upstream interface limits the host link width, but it provides a defined path to the bridge's 32-bit/66 MHz PCI side for compatible equipment. Thermal performance depends on the exposed-pad implementation, PCB copper, airflow, and sustained bus activity, so the bridge should be placed away from uncontrolled thermal boundaries. Designers should verify supported device classes, interrupt behavior, power requirements, and system software support before finalizing the workstation configuration.

🏭

Industrial Embedded Controller Platforms

PI7C9X118SLFDEX can support an embedded or industrial controller platform that needs one x1 PCI Express uplink and compatibility with a 32-bit/66 MHz PCI subsystem. The commercial-extended temperature designation makes it a candidate for commercial industrial equipment, but the permitted operating-temperature limits must be checked for the final enclosure environment. The 14 x 14 mm exposed-pad LQFP facilitates routing in compact controller boards and provides a defined thermal landing area. Qualification should include worst-case supply tolerance, clock jitter margin, peripheral hot-plug behavior if applicable, enclosure temperature, and long-duration bus-transfer activity.

📱

Ultra-Mobile Expansion Platforms

The PI7C9X118SLFDEX addresses ultra-mobile and portable expansion platforms that need a conventional PCI interface from a compact PCI Express design. The SlimLine bridge position emphasizes a small 14 x 14 mm footprint, performance-tuned x1-to-PCI conversion, and low-power-oriented implementation. Power budget analysis should include both the bridge and the attached PCI load because the available input rails and total power must remain within platform limits. Use the manufacturer's recommended capacitor placement, clock routing, and exposed-pad construction to preserve signal integrity. Mobile designs should also validate suspend-to-resume behavior, peripheral power states, and operating-temperature limits across the complete product environment.

🔬

PCI Express Test and Measurement

The PI7C9X118SLFDEX can be used in a test fixture or measurement platform that combines a PCI Express host connection with a conventional PCI peripheral interface. The x1 PCI Express side and 32-bit/66 MHz PCI side create a defined bridge boundary for acquiring data from legacy PCI equipment. Measurement accuracy should not be assumed to come from the bridge alone; signal integrity, reference-clock quality, termination, loading, and the attached instrument determine usable bandwidth. The exposed pad must be connected according to the manufacturer layout so sustained transfers do not create a thermal hotspot. Bring-up testing should cover bus enumeration, timing margins, interrupt delivery, and repeatability across power cycles.

Buod ng mga Inirekomendang Produkto

PI7C9X118SLFDEX Diodes Incorporated Ginagamit sa: Compact PCI Express System Modules, Legacy PCI Peripheral Expansion, Workstation PCI Compatibility, Industrial Embedded Controller Platforms, Ultra-Mobile Expansion Platforms, PCI Express Test and Measurement PI7C9X118SL Manufacturer product-family identifier Ginagamit sa: Compact PCI Express System Modules, Legacy PCI Peripheral Expansion, Workstation PCI Compatibility, Industrial Embedded Controller Platforms, Ultra-Mobile Expansion Platforms, PCI Express Test and Measurement
What is the PI7C9X118SLFDEX?
The PI7C9X118SLFDEX is a Diodes Incorporated PCI Express-to-PCI bridge interface IC. According to the manufacturer product page for PI7C9X118SL, it converts an x1 PCI Express interface to a 32-bit/66 MHz PCI bus. The device is intended for desktop, workstation, ultra-mobile, and system-module designs that require a conventional PCI interface without implementing a larger discrete bridge.
What package does PI7C9X118SLFDEX use?
The PI7C9X118SLFDEX uses a 128-terminal HLFQFP package measuring 14 x 14 mm. Product records identify the package as LQFP-128-EP, indicating an exposed pad in addition to the 128 gull-wing terminals. The exposed pad is intended to provide a low-impedance thermal and electrical connection to the PCB according to the manufacturer's land pattern.
Where can I download the PI7C9X118SLFDEX datasheet?
The official PI7C9X118SL manufacturer page is available at https://www.diodes.com/part/view/PI7C9X118SL and provides the authoritative product documentation and download links. Use that page for the current datasheet PDF, pin-description table, electrical characteristics, reference design information, and package drawing. The FDEX suffix must be retained when identifying the exact 128-LQFP exposed-pad ordering configuration.
Where can I find the PI7C9X118SLFDEX pinout?
The PI7C9X118SLFDEX pinout is obtained from the pin-description table and package drawing linked on the manufacturer's PI7C9X118SL product page. The device has 128 terminals, but their individual signal names are not reproduced in general catalog snippets. Use the manufacturer pin table for every connection, including power, ground, clock, PCI, PCI Express, configuration, and exposed-pad assignments.
What are the key specifications of PI7C9X118SLFDEX that engineers should know?
The principal documented specifications are an x1 PCI Express upstream interface, a 32-bit/66 MHz PCI downstream interface, a 128-terminal 14 x 14 mm LQFP package with exposed pad, commercial-extended temperature grade, surface mounting, and RoHS compliance. The manufacturer describes the PI7C9X118SL family as performance tuned for high throughput and low power. Detailed electrical limits and timing values must be taken from the exact PI7C9X118SL datasheet.
PI7C9X118SLFDEX vs PI7C9X2G404SLBFDE - which is better for a PCI bridge?
PI7C9X118SLFDEX is specifically documented as an x1 PCIe-to-32-bit/66 MHz PCI bridge in a 128-terminal exposed-pad LQFP. PI7C9X2G404SLBFDE is a related bridge-family part, but its package and pin compatibility are not established by the available technical records. Do not treat it as a drop-in substitute unless its datasheet confirms matching terminals, supply rails, clocking, and signal assignments.
Can PI7C9X118SLFDEX be used in an industrial PCI Express system?
PI7C9X118SLFDEX can be considered for a PCI Express system that requires conversion to a conventional 32-bit/66 MHz PCI bus, but the exact operating-temperature range must be confirmed before industrial deployment. The product is identified as commercial extended. Validate thermal performance, available power rails, clock tolerance, peripheral compatibility, and system-level qualification against the manufacturer datasheet.
What is the best drop-in replacement for PI7C9X118SLFDEX?
No confirmed drop-in replacement for PI7C9X118SLFDEX is established by the available cross-reference records. A valid replacement must use the same 128-LQFP exposed-pad land pattern and provide compatible power, clock, configuration, PCI Express, and conventional PCI pin assignments; merely offering a similar bridge function is insufficient. Obtain the manufacturer cross-reference result and compare both datasheets before releasing a substitute into production.
What can replace PI7C9X118SLFDEX?
Only a bridge with a verified 128-terminal exposed-pad footprint and matching electrical and protocol behavior should replace PI7C9X118SLFDEX without PCB changes. The identified PI7C9X2G404-series comparison parts do not provide enough package and pinout information to claim drop-in compatibility. A production replacement requires direct comparison of the target and candidate datasheets, including every power pin, reference clock, configuration signal, and PCI interface assignment.
Is PI7C9X118SLFDEX the same as PI7C9X118SL?
PI7C9X118SLFDEX is the orderable 128-LQFP exposed-pad configuration associated with the PI7C9X118SL bridge family. PI7C9X118SL is the family product identifier used on the manufacturer page, while FDEX specifies the package and ordering option. The official PI7C9X118SL documentation should be used to determine which package, temperature, and lifecycle options are available under each ordering code.
Where can I buy PI7C9X118SLFDEX online?
Use the Request a Quote form on this page to request PI7C9X118SLFDEX availability, current lead time, minimum order quantity, and a formal quotation. The exact ordering code must include the FDEX suffix so that the supplier identifies the 128-LQFP exposed-pad configuration rather than another PI7C9X118SL package option. Current sourcing status should be confirmed through the quotation response.
What is the price of PI7C9X118SLFDEX?
PI7C9X118SLFDEX pricing depends on quantity, package identification, supplier inventory, and current market conditions. Submit the MPN through the Request a Quote form on this page for a current unit-price break and lead-time response. Include the required quantity, target date, and whether reel, tray, or another approved shipping format is needed so the quotation matches the production plan.
What is the lead time for PI7C9X118SLFDEX?
The current lead time for PI7C9X118SLFDEX should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, factory availability, and packaging requirements. Request the earliest available delivery date together with the requested quantity, production schedule, and acceptable packaging format before committing the bridge device to a system build schedule.
Is PI7C9X118SLFDEX in stock?
PI7C9X118SLFDEX availability changes with supplier inventory and replenishment timing. Use the Request a Quote form on this page to request a current stock confirmation and expected delivery schedule for the exact FDEX ordering code. The request should specify quantity and date because an availability response for one reel quantity may not represent bulk production allocation.
How is power and ground connected on PI7C9X118SLFDEX?
Power, ground, clock, and exposed-pad connections must be taken directly from the PI7C9X118SL pin-description table and recommended layout because individual net names are not established in catalog records. Place all required bypass capacitors at the pins specified by the manufacturer, connect the exposed pad to the prescribed PCB thermal and ground structure, and follow the differential PCI Express routing guidance.

Impormasyon ng Talumpati sa Engineering for PI7C9X118SLFDEX — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose PI7C9X118SLFDEX when a board must convert an x1 PCI Express interface to a conventional 32-bit/66 MHz PCI bus and the design can accommodate a 128-terminal, 14 x 14 mm LQFP with exposed pad. The device is particularly relevant to compact modules, workstation compatibility, embedded platforms, and systems retaining legacy PCI peripherals. Its suitability for an industrial enclosure still depends on the confirmed operating-temperature range, available power rails, thermal design, and firmware support. Do not substitute PI7C9X2G404-series parts based on family similarity alone; no alternative in the available records is confirmed pin-to-pin compatible. A second source should be accepted only after its package, all 128 terminal assignments, clocking, electrical limits, and protocol behavior match the target datasheet. For designs that do not require a conventional PCI bus, a native PCI Express interface solution may be simpler and more efficient.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Diodes Incorporated
Package 128-LQFP with exposed pad, 14 x 14 mm
Device Type PCI Express-to-PCI bridge interface IC
PCI Express Interface x1 PCI Express
Conventional PCI Interface 32-bit/66 MHz PCI
Terminal Count 128 terminals
Temperature Grade Commercial extended
RoHS Status Compliant
Mounting Type Surface mount

Pangunahing mga Pagkakaiba

  • Defined x1-to-conventional-PCI bridge function (kumpara saPI7C9X2G404SLBFDE)
  • Compact exposed-pad bridge package (kumpara saPI7C9X2G404SVAFDEEX)
  • Commercial-extended temperature positioning (kumpara saPI7C9X2G404SLBFDE)

Talaan ng Disenyo

Implement the PI7C9X118SLFDEX land pattern exactly from the manufacturer package drawing. A 128-terminal LQFP requires careful fanout from the exposed pad, and every terminal must remain accessible for inspection and rework. Place local bypass capacitors at the pins identified in the datasheet, preserve the exposed-pad copper connection, and avoid placing high-current or thermally aggressive circuitry directly beneath the bridge.

Treat the PCI Express side as a high-speed differential interface and apply the manufacturer's trace-length, impedance, via, and return-path rules. Keep the reference-clock route away from noisy switching nodes, maintain continuous ground references beneath the exposed pad, and use the prescribed decoupling arrangement. After PCB assembly, verify differential routing and clock behavior with suitable instrumentation before attaching sensitive peripherals.

Use the exposed pad as the primary thermal path and follow the manufacturer's copper-pour and via-array recommendation. Estimated: when the bridge dissipates 1 W, each copper via contributes according to its construction and thermal environment, so the final rise cannot be determined from package area alone. Validate with a thermal camera or thermocouples during sustained PCI transfers at the highest expected load and ambient temperature.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

RoHS compliance is identified in the PI7C9X118SLFDEX catalog record. Other environmental and conflict-minerals declarations must be confirmed from the manufacturer documentation.

Data napatotohanan sa: 2026-11-17 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

PI7C9X118SLFDEX datasheet PI7C9X118SLFDEX pinout PI7C9X118SLFDEX datasheet pdf PI7C9X118SLFDEX price PI7C9X118SLFDEX stock Diodes Incorporated PI7C9X118SLFDEX PI7C9X118SLFDEX 128 LQFP PI7C9X118SLFDEX PCIe to PCI PI7C9X118SLFDEX equivalent PI7C9X118SLFDEX replacement PI7C9X118SLFDEX vs PI7C9X2G404SLBFDE PI7C9X118SL PCIe-to-PCI bridge PI7C9X118SLFDEX where to buy PI7C9X118SLFDEX reference design

Mga kaugnay na Mga Komponente at mga Tuntunin

Diodes Incorporated PI7C9X118SLFDEX PI7C9X118SL PI7C9X2G404SLBFDE PI7C9X2G404SVAFDEEX PCI Express PCI bus PCIe-to-PCI bridge interface IC bus controller x1 PCI Express 32-bit PCI 66 MHz PCI 128-LQFP HLFQFP exposed pad surface mount commercial extended RoHS SlimLine system module reference clock signal integrity semiconductor
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ