PI7C9X118SLFDEX - PCIe-to-PCI Bridge | Diodes Incorporated
MPN: PI7C9X118SLFDEX ✓ فعالPI7C9X118SLFDEX نمای کلی
A PCI Express-to-PCI bridge belongs to the interface IC category and sits between high-speed serial computer buses and older parallel peripheral buses. PCIe uses serial point-to-point links, while the PCI side of this device exposes the legacy parallel bus. This bridge allows desktop, workstation, ultra-mobile, and system-module architectures to retain compatibility with PCI peripherals without implementing a separate host adapter.
The PI7C9X118SL is performance tuned for x1 PCI Express to 32-bit/66 MHz PCI bridging and is positioned for low-power, space-constrained systems. Its stated 128-LQFP package includes an exposed thermal pad, providing a large-area connection for heat dissipation on multilayer PCBs. The FDEX ordering suffix identifies the specific leaded LQFP package and exposed-pad configuration used in this listing.
The component is used as a bus-interface controller rather than as a general-purpose processor, memory device, or transceiver. Its primary design task is protocol conversion, clocking, buffering, and arbitration between the PCI Express endpoint-facing interface and the legacy PCI bus. System firmware and operating-system support remain necessary for a complete bridge implementation, and board-level validation should confirm timing, power sequencing, and peripheral compatibility.
Typical uses include PCI Express system modules, industrial and embedded controller platforms, workstation peripherals, legacy PCI expansion systems, and compact computers requiring an x1-to-conventional-PCI pathway. In these applications, the exposed-pad package helps remove heat from the bridge during sustained transfer activity, while the 14 x 14 mm outline preserves more board area than a larger discrete bridge solution.
Designers should follow the manufacturer's pin-description table and reference design when assigning the 128 package terminals, configuring local signals, and connecting the exposed pad. Input, output, power, ground, clock, and differential PCI Express routing must follow the exact pin definitions and recommended layout constraints to avoid signal-integrity or protocol-compliance problems.
This page consolidates the verified device identity, package information, bridge function, lifecycle sourcing information, and practical implementation guidance. It also distinguishes documented characteristics from parameters that require confirmation from the manufacturer datasheet, helping engineers plan the board-level review without assuming electrical or timing values that are not established.
جایگزینهای drop-in برای PI7C9X118SLFDEX — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
هیچ جایگزین مستقیمی برای این محصول موجود نیست.
درخواست جایگزینPI7C9X118SLFDEX حداکثر مقادیر مجاز و مشخصات الکتریکی
| Device Type | PCI Express-to-PCI bridge interface IC |
| PCI Express Interface | x1 PCI Express |
| Conventional PCI Interface | 32-bit/66 MHz PCI |
| PCI Data Width | 32 bit |
| PCI Maximum Clock | 66 MHz |
| Package Type | 128-LQFP with exposed pad |
| Package Dimensions | 14 x 14 mm |
| Terminal Count | 128 terminals |
| Package Code | HLFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| نوع نصب | Surface mount |
| Temperature Grade | Commercial extended |
| وضعیت RoHS | Compliant |
| PCI Express Lane Width | x1 |
راهنمای پیکربندی پین PI7C9X118SLFDEX square
پیکربندی پین برای PI7C9X118SLFDEX (پکیج square). این قطعه قدرت دارای پایانههای گیت، درین و سورس است. برای پکیجهای غیرقطبی، برای جهت دقیق پین ۱ و جزئیات فوتپرینت به دیتاشیت سازنده مراجعه کنید. کاربردهای رایج شامل طراحی منبع تغذیه، درایو موتور و سوئیچینگ بار است.
داده پینآوت تفصیلی موجود نیست برای PI7C9X118SLFDEX.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
PI7C9X118SLFDEX مناسب است برای 6 کاربردs: Compact PCI Express System Modules, Legacy PCI Peripheral Expansion, Workstation PCI Compatibility, Industrial Embedded Controller Platforms, Ultra-Mobile Expansion Platforms, PCI Express Test and Measurement.
Compact PCI Express System Modules
The PI7C9X118SLFDEX fits compact system modules that expose one PCI Express x1 link but must support a conventional PCI device. It performs the bridge function between the serial x1 PCI Express interface and the 32-bit/66 MHz PCI side, allowing a module designer to retain legacy expansion without implementing a separate PCI controller. Its 14 x 14 mm, 128-terminal LQFP package with exposed pad supports dense layouts, while the exposed-pad connection provides a practical thermal path on multilayer PCBs. System-level validation should include reference-clock behavior, power sequencing, firmware support, and the timing requirements of every peripheral attached to the PCI bus.
پیشنهادی
Legacy PCI Peripheral Expansion
The PI7C9X118SLFDEX is useful when a modern PCI Express host must connect to an established 32-bit/66 MHz PCI peripheral. The bridge places the PCI Express and conventional PCI interfaces behind one dedicated controller, reducing the need for discrete interface logic on the motherboard. Because this is a protocol and timing boundary, the selected peripheral must be checked against the bridge timing, arbitration, configuration, and clock requirements in the manufacturer documentation. Board layout should reserve the full 128-terminal footprint, continuous reference-clock routing, and the prescribed exposed-pad thermal structure. Firmware must also enumerate and configure the bridged PCI device correctly.
پیشنهادی
Workstation PCI Compatibility
Workstation and desktop platforms can use the PI7C9X118SLFDEX to retain compatibility with conventional PCI expansion while adopting PCI Express host connectivity. The x1 upstream interface limits the host link width, but it provides a defined path to the bridge's 32-bit/66 MHz PCI side for compatible equipment. Thermal performance depends on the exposed-pad implementation, PCB copper, airflow, and sustained bus activity, so the bridge should be placed away from uncontrolled thermal boundaries. Designers should verify supported device classes, interrupt behavior, power requirements, and system software support before finalizing the workstation configuration.
پیشنهادی
Industrial Embedded Controller Platforms
PI7C9X118SLFDEX can support an embedded or industrial controller platform that needs one x1 PCI Express uplink and compatibility with a 32-bit/66 MHz PCI subsystem. The commercial-extended temperature designation makes it a candidate for commercial industrial equipment, but the permitted operating-temperature limits must be checked for the final enclosure environment. The 14 x 14 mm exposed-pad LQFP facilitates routing in compact controller boards and provides a defined thermal landing area. Qualification should include worst-case supply tolerance, clock jitter margin, peripheral hot-plug behavior if applicable, enclosure temperature, and long-duration bus-transfer activity.
پیشنهادی
Ultra-Mobile Expansion Platforms
The PI7C9X118SLFDEX addresses ultra-mobile and portable expansion platforms that need a conventional PCI interface from a compact PCI Express design. The SlimLine bridge position emphasizes a small 14 x 14 mm footprint, performance-tuned x1-to-PCI conversion, and low-power-oriented implementation. Power budget analysis should include both the bridge and the attached PCI load because the available input rails and total power must remain within platform limits. Use the manufacturer's recommended capacitor placement, clock routing, and exposed-pad construction to preserve signal integrity. Mobile designs should also validate suspend-to-resume behavior, peripheral power states, and operating-temperature limits across the complete product environment.
پیشنهادی
PCI Express Test and Measurement
The PI7C9X118SLFDEX can be used in a test fixture or measurement platform that combines a PCI Express host connection with a conventional PCI peripheral interface. The x1 PCI Express side and 32-bit/66 MHz PCI side create a defined bridge boundary for acquiring data from legacy PCI equipment. Measurement accuracy should not be assumed to come from the bridge alone; signal integrity, reference-clock quality, termination, loading, and the attached instrument determine usable bandwidth. The exposed pad must be connected according to the manufacturer layout so sustained transfers do not create a thermal hotspot. Bring-up testing should cover bus enumeration, timing margins, interrupt delivery, and repeatability across power cycles.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای PI7C9X118SLFDEX — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
مقایسه با جایگزینها
| پارامتر | این محصول |
|---|---|
| Brand | Diodes Incorporated |
| Package | 128-LQFP with exposed pad, 14 x 14 mm |
| Device Type | PCI Express-to-PCI bridge interface IC |
| PCI Express Interface | x1 PCI Express |
| Conventional PCI Interface | 32-bit/66 MHz PCI |
| Terminal Count | 128 terminals |
| Temperature Grade | Commercial extended |
| RoHS Status | Compliant |
| Mounting Type | Surface mount |
تفاوتهای کلیدی
- Defined x1-to-conventional-PCI bridge function (در مقابلPI7C9X2G404SLBFDE)
- Compact exposed-pad bridge package (در مقابلPI7C9X2G404SVAFDEEX)
- Commercial-extended temperature positioning (در مقابلPI7C9X2G404SLBFDE)
یادداشتهای طراحی
Implement the PI7C9X118SLFDEX land pattern exactly from the manufacturer package drawing. A 128-terminal LQFP requires careful fanout from the exposed pad, and every terminal must remain accessible for inspection and rework. Place local bypass capacitors at the pins identified in the datasheet, preserve the exposed-pad copper connection, and avoid placing high-current or thermally aggressive circuitry directly beneath the bridge.
Treat the PCI Express side as a high-speed differential interface and apply the manufacturer's trace-length, impedance, via, and return-path rules. Keep the reference-clock route away from noisy switching nodes, maintain continuous ground references beneath the exposed pad, and use the prescribed decoupling arrangement. After PCB assembly, verify differential routing and clock behavior with suitable instrumentation before attaching sensitive peripherals.
Use the exposed pad as the primary thermal path and follow the manufacturer's copper-pour and via-array recommendation. Estimated: when the bridge dissipates 1 W, each copper via contributes according to its construction and thermal environment, so the final rise cannot be determined from package area alone. Validate with a thermal camera or thermocouples during sustained PCI transfers at the highest expected load and ambient temperature.
اطلاعات انطباق
RoHS compliance is identified in the PI7C9X118SLFDEX catalog record. Other environmental and conflict-minerals declarations must be confirmed from the manufacturer documentation.