Microchip Technology

PIC16F716-E/SS - 20MHz 8-Bit Flash MCU | Microchip Technology

MPN: PIC16F716-E/SS ✓ Nakahanda
2.5 V to 5.5 V Vdss 20-pin SSOP Package 20 MHz Speed 3.5 KB Flash (2K x 14 bits) Memory
MOQ: 1 |

PIC16F716-E/SS Ulas

The Microchip Technology PIC16F716-E/SS is an 8-bit Flash-based PIC microcontroller operating up to 20 MHz, with 3.5 KB of program Flash, 128 bytes of RAM and four 8-bit analog-to-digital converter channels. It is packaged in a 20-pin SSOP and operates from 2.5 V to 5.5 V. The device also provides 13 I/O pins, two additional timers and enhanced capture, compare and PWM functions for compact embedded control and measurement systems.

An 8-bit Flash microcontroller is a programmable semiconductor that combines a CPU, program memory, data memory and peripherals on one integrated circuit. Within the embedded-control hierarchy, the PIC16F716 belongs to the PIC16 family of 8-bit RISC microcontrollers. It combines a conventional processor core with mixed-signal peripherals, allowing a design to measure analog inputs, control outputs, and execute embedded control logic without requiring separate components for every function.

Key features include a 20 MHz maximum clock speed, 3.5 KB of Flash program memory organized as 2K by 14 bits, and 128 bytes of RAM. The four-channel 8-bit A/D converter supports applications that need sensor measurements, while enhanced capture, compare and PWM modules provide flexible timing and waveform-generation functions. Operation across 2.5 V, 3.3 V and 5 V supply options allows the same controller family to address low-voltage control, sensor-interface and conventional embedded applications.

The PIC16F716 architecture uses a compact RISC-based instruction set and integrates the A/D converter, timers, I/O ports, and enhanced capture/compare/PWM peripherals into a single device. Its 128 bytes of RAM limit the amount of simultaneous volatile data that can be retained, so register allocation and buffering strategy should be planned carefully. Flash program memory supports field-programmable embedded logic, while the A/D subsystem provides a direct interface to resistive, resistive-divider and other analog sensors.

Typical applications include industrial motor and appliance controls, automotive interface modules, consumer products, and compact sensor nodes. The combination of four analog channels and multiple timers is useful in fan controllers, temperature monitors, keypad interfaces, and small closed-loop control systems. The 20-pin SSOP also permits a relatively compact PCB footprint when fine-pitch assembly and adequate board spacing are available.

Designers should reserve all supply pins for proper decoupling, route analog inputs away from switching nodes, and maintain the voltage and current limits stated in the manufacturer datasheet. The -E suffix identifies the specified temperature grade, while /SS identifies the 20-pin SSOP package and SS provides the extended operating-temperature designation associated with this ordering code.

This product page consolidates the manufacturer specifications, package details, programming resources, commercially relevant sourcing information, and clearly identified drop-in alternatives. It also highlights the constraints that matter most when deciding whether the PIC16F716-E/SS fits a new embedded-control design or whether a different MCU should be selected.

Mga alternatibo na pwedeng ilagay na PIC16F716-E/SS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok PIC16F716-E/SS (parehas na form factor at footprint) — pagkakaiba sa Package, Timers, ADC, Program Memory (Flash), RoHS Status.

Microchip Technology
Package: 20-SSOP
Timers: 2 (Timer0 8-bit, Timer1 16-bit)
Microchip Technology
Timers: 2 x 8-bit, 1 x 16-bit
ADC: 4 channels, 8-bit
Program Memory (Flash): 3.5 KB
Microchip Technology
Package: 28-pin SSOP (5.30 mm body, 0.65 mm pitch)
Timers: 2 x 8-bit + 1 x 16-bit
ADC: 8-bit, 8 channels
Microchip Technology
Package: 28-pin SSOP (5.30 mm body)
Timers: 3 x 8-bit (TMR0, TMR1, TMR2)
ADC: 5 channels, 8-bit resolution

PIC16F716-I/SS

✅ Drop-In
Microchip Technology
📦 20-pin SSOP
3.5 KB · 128 bytes · 8-bit PIC16 mid-range RISC · 35 single-word instructions · 200 ns at 20 MHz · 20 MHz · 13 · 4 channels, 8-bit

Magkontak para sa presyo

Tingnan ang Datasheet →

PIC16F716-E/SS Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 8-bit Flash-based RISC microcontroller
Maximum Clock Speed 20 MHz
Program Memory 3.5 KB Flash (2K x 14 bits)
Data Memory 128 bytes RAM
A/D Converter Resolution 8 bits
A/D Converter Channels 4 channels
Additional Timers 2 timers
I/O Pin Count 13 I/O pins
Supply Voltage na Operasyon 2.5 V to 5.5 V
Supported Supply Levels 2.5 V, 3.3 V and 5 V
Enhanced Peripherals Enhanced capture, compare and PWM
Packhaging 20-pin SSOP
Uri ng Pagpapasok Surface mount
Terminal Count 20 terminals
Katayuan ng Lifecycle Active
Temperature Grade -E extended temperature grade

Gabay sa Pin Configuration ng PIC16F716-E/SS 20-pin ssop

Pin configuration para sa PIC16F716-E/SS (20-pin ssop package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 20-pin ssop package para sa PIC16F716-E/SS

Wala ng detalyadong pinout data na magagamit para sa PIC16F716-E/SS.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

PIC16F716-E/SS ay nararapat para sa 6 aplikasyons: Industrial Sensor Monitoring, Fan and Motor Control, Appliance Control Module, Automotive Interface Control, Consumer Product Interface, Embedded Timer and Counter.

🏭

Industrial Sensor Monitoring

The PIC16F716-E/SS fits industrial sensor-monitoring designs that require four analog measurement channels without a separate ADC. Its 8-bit A/D converter can read resistive or divider-based sensors, while 128 bytes of RAM provides working storage for current readings and control state. The 20 MHz clock supports responsive sampling and filtering, and two additional timers can organize acquisition intervals or periodic control actions. Keep analog traces short, isolate them from switching nodes, and reference the electrical-characteristics limits before selecting external sensor ranges.

⚡

Fan and Motor Control

The PIC16F716-E/SS is appropriate for compact fan or small-motor controllers that combine speed measurement with controlled drive timing. Its four A/D channels can monitor a supply, temperature, or motor-related analog signal, while the additional timers and enhanced PWM functions organize switching or modulation functions. The 13 available I/O pins leave room for control outputs and status signals. Designers should calculate timing and drive current from the selected external transistors and motors because those load ratings are not defined by the microcontroller itself.

🔧

Appliance Control Module

The PIC16F716-E/SS supports appliance-control boards that must read analog inputs and coordinate several timed outputs. Its four-channel 8-bit A/D converter can monitor temperature, position, or level signals, while enhanced capture, compare and PWM functions can simplify operating cycles and actuator timing. The 3.5 KB Flash capacity is suitable for focused control firmware, although 128 bytes of RAM requires disciplined buffer management. Firmware should include safe output states for power loss, sensor faults, and actuator overload conditions.

🚗

Automotive Interface Control

The PIC16F716-E/SS can support compact automotive interface and auxiliary-control functions where four analog inputs and multiple timed I/O resources are useful. Microchip identifies automotive applications among the PIC16F716 family's intended markets, and the device combines 20 MHz processing with 13 I/O pins. A production automotive design must still verify the exact temperature grade, transient limits, EMC requirements and vehicle load-dump protection externally. The MCU should not be connected directly to vehicle power or long harness wiring without appropriate protection.

📱

Consumer Product Interface

The PIC16F716-E/SS is suitable for compact consumer products requiring local sensing, user input and timed output control. Its four analog inputs can support touch, level or temperature-related functions, while the timers and PWM peripherals can drive indicators or simple actuators. The 20-pin SSOP reduces board area compared with larger packages, making the device useful in space-constrained products. Firmware organization must account for the 128-byte RAM limit, and production programming should follow the device programming specification for reliable field or manufacturing integration.

🧩

Embedded Timer and Counter

The PIC16F716-E/SS can serve as the central controller in a compact timer, event counter or repetitive-sequence product. Two additional timers complement the core timing resources, while the 13 I/O pins support input capture, output events and status indication. A 20 MHz clock provides a higher processing ceiling for debouncing, event handling and display updates, and the four A/D channels can supervise an analog process variable. Define timer prescaler and interrupt latency requirements during firmware planning so scheduling remains deterministic.

Buod ng mga Inirekomendang Produkto

PIC16F716 PIC16 microcontroller family device Ginagamit sa: Industrial Sensor Monitoring, Fan and Motor Control, Appliance Control Module, Automotive Interface Control, Consumer Product Interface, Embedded Timer and Counter PIC16F716-I/SS Microchip Technology Ginagamit sa: Industrial Sensor Monitoring, Fan and Motor Control, Appliance Control Module, Automotive Interface Control, Consumer Product Interface, Embedded Timer and Counter
What are the key specifications of PIC16F716-E/SS that engineers should know?
The PIC16F716-E/SS is an 8-bit Flash-based RISC microcontroller with a 20 MHz maximum clock, 3.5 KB of Flash program memory, 128 bytes of RAM and four 8-bit A/D converter channels. According to the Microchip Technology datasheet DS41206B, the device also provides 13 I/O pins, two additional timers and enhanced capture, compare and PWM functions in a 20-pin SSOP.
What is the operating voltage range of PIC16F716-E/SS?
The PIC16F716-E/SS operates from 2.5 V to 5.5 V, supporting 2.5 V, 3.3 V and 5 V design configurations. According to the Microchip Technology PIC16F716 datasheet DS41206B, the supply range accommodates both lower-voltage portable systems and conventional 5 V embedded-control boards. Decoupling and input-voltage design should follow the electrical-characteristics table.
Where can I download the PIC16F716-E/SS datasheet PDF?
The official PIC16F716-E/SS datasheet PDF is available from Microchip Technology at https://ww1.microchip.com/downloads/en/devicedoc/41206a.pdf. The document is identified as DS41206B and contains the device pinout, electrical characteristics, peripheral descriptions, memory organization and application guidance. It is the preferred reference for final pin assignments and device limitations.
Where can I find the PIC16F716 pinout and package information?
The PIC16F716-E/SS uses a 20-pin SSOP package, and its complete pin assignments are listed in Table 1-1 of the Microchip Technology PIC16F716 datasheet DS41206B. Use that table when assigning power, ground, I/O, oscillator and programming functions. The PDF also provides the standard pin configuration diagrams needed to cross-check the physical footprint.
How do I program a PIC16F716-E/SS?
A PIC16F716-E/SS is programmed through its dedicated in-circuit serial programming interface using a compatible PIC programmer and programming specification. The Microchip Technology PIC16F716 datasheet DS41206B describes the programming connections, while the associated Programming Specification identifies supported programming operations. Confirm pin voltages and signal levels against both documents before production use.
Which PIC16F716 programmer is suitable for this microcontroller?
Select a programmer that explicitly supports the PIC16F716 family and its in-circuit serial programming interface. Microchip's Programming Specification for the PIC16F716 identifies the supported programming architecture, while the DS41206B datasheet defines the relevant device pins. Compatibility should be checked by device family and package, not inferred solely from the number of programming signals.
What can PIC16F716-E/SS be used for?
The PIC16F716-E/SS is suitable for compact embedded-control systems that combine analog measurement with timed outputs. Its four 8-bit A/D channels support sensor inputs, while two additional timers and enhanced capture, compare and PWM functions support fan control, appliance control, automotive interfaces and small industrial monitoring products. The manufacturer identifies automotive, industrial, appliance and consumer use as representative markets.
What is the difference between PIC16F716-E/SS and PIC16F716-I/SS?
Both devices are 20-pin SSOP PIC16F716 microcontrollers with the same 20 MHz maximum clock and 3.5 KB Flash program memory, but their ordering codes specify different temperature grades. The -E device uses the extended-temperature designation, while the -I device is associated with the industrial-temperature ordering code. Both are listed as surface-mount, pin-compatible alternatives.
When should I choose PIC16F716-E/SS over PIC16F716-I/SS?
Choose the PIC16F716-E/SS when the required operating-temperature grade is covered by its -E designation and the design otherwise calls for the 20-pin SSOP PIC16F716 configuration. Choose PIC16F716-I/SS when its industrial-temperature designation matches the product specification. The Microchip Technology datasheet DS41206B should be checked for the exact temperature limits and associated electrical characteristics.
What is the best drop-in replacement for PIC16F716-E/SS?
PIC16F716-I/SS is a confirmed same-package, pin-compatible alternative with the same 20-pin SSOP format, 20 MHz clock and 3.5 KB Flash memory. Its primary ordering-code difference is the temperature-grade designation, so it must be checked against the required ambient-temperature range. The available cross-reference results do not establish five distinct drop-in replacements.
Can PIC16F716-I/SS replace PIC16F716-E/SS without changing the PCB?
Yes, PIC16F716-I/SS can replace PIC16F716-E/SS without a PCB footprint change because both use the same 20-pin SSOP package and the same PIC16F716 device family. The replacement remains conditional on temperature-grade requirements, operating voltage, memory, peripheral configuration and any programmed-device or traceability requirements. Review the manufacturer ordering information before approving the substitution.
Is there a Microchip PIC16F716-E/SS equivalent from another manufacturer?
No verified cross-manufacturer drop-in equivalent was established for the PIC16F716-E/SS. The cross-reference results identify Microchip family alternatives and comparison tools but do not document a different manufacturer's device with the same 20-pin SSOP footprint, pin functions and compatible electrical characteristics. A cross-brand substitution should not be approved without manufacturer-level pinout and parametric confirmation.
Where can I buy PIC16F716-E/SS and check current availability?
Use the Request a Quote form on this page to request PIC16F716-E/SS pricing, current availability, minimum order quantity and lead time. The manufacturer product page identifies the PIC16F716 family as active, while the exact orderable suffix, packaging and delivery conditions should be confirmed during quotation. The request avoids stale stock assumptions.
How much does PIC16F716-E/SS cost?
Use the Request a Quote form on this page for the current unit price and quantity breaks for PIC16F716-E/SS. Commercial pricing can vary with order quantity, package form, factory-programmed configuration and current factory inventory. The request form provides a current quotation tied to the exact ordering code rather than a generic PIC16F716 price.
What is the lead time and stock status of PIC16F716-E/SS?
Current stock and lead time for the exact PIC16F716-E/SS configuration should be requested through the Request a Quote form on this page. Microchip Technology lists the PIC16F716 family as active, but lifecycle status alone does not guarantee immediate availability of every package suffix or factory-programmed configuration. Include the required quantity and any programming or traceability requirements with the request.
How many analog inputs and timers does PIC16F716-E/SS provide?
PIC16F716-E/SS provides four 8-bit A/D converter channels and two additional timers. The manufacturer product page highlights these resources for more advanced level A/D applications, while the datasheet also describes enhanced capture, compare and PWM functions. These peripherals reduce external circuitry in sensing, timing, fan-control and mixed-signal control designs.

Impormasyon ng Talumpati sa Engineering for PIC16F716-E/SS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the PIC16F716-E/SS for a compact embedded-control design requiring an 8-bit core, 20 MHz maximum clock, four analog inputs, 13 I/O pins and enhanced PWM, particularly when the -E temperature grade satisfies the product requirements. Choose PIC16F716-I/SS when its industrial-temperature ordering designation is preferable and the remaining specifications remain unchanged. Both are mechanically compatible with a 20-pin SSOP footprint, simplifying PCB reuse. The PIC16F716-E/SS is not appropriate when the design needs more than 3.5 KB Flash, 128 bytes of RAM, more than four A/D channels or more than 13 I/O pins. In those cases, move to a larger PIC16 device with expanded memory and peripherals. Also confirm programming-tool support, oscillator requirements and the final temperature limits before releasing a production BOM.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto PIC16F716-I/SS
Brand Microchip Technology Microchip Technology
Package 20-pin SSOP 20-pin SSOP - same
Architecture 8-bit PIC16 RISC 8-bit PIC16 RISC
Maximum Clock Speed 20 MHz 20 MHz
Program Memory 3.5 KB Flash (2K x 14 bits) 3.5 KB Flash
RAM 128 bytes 128 bytes
A/D Converter 4 channels at 8 bits 4 channels at 8 bits
I/O Pins 13 I/O pins 13 I/O pins
Supply Voltage Range 2.5 V to 5.5 V 2.5 V to 5.5 V
Temperature Grade -E extended temperature grade -I industrial temperature grade
Enhanced PWM Available Available

Pangunahing mga Pagkakaiba

  • Same-footprint alternative within the exact PIC16F716 family (kumpara saPIC16F716-I/SS)
  • Four-channel analog measurement in a compact controller (kumpara saPIC16F716-I/SS)
  • Flexible 2.5 V to 5.5 V operating range (kumpara saPIC16F716-I/SS)

Talaan ng Disenyo

Place the supply bypass capacitor close to the device power pins and connect the ground return directly to the ground plane. Follow the capacitor value and placement recommendations in the Microchip Technology PIC16F716 datasheet DS41206B. Keep analog and digital return currents separated where possible, and verify the design against the operating range of 2.5 V to 5.5 V.

Use the 20-pin SSOP land pattern from the manufacturer package drawing and verify all pad dimensions against the final PCB library. Maintain adequate spacing between adjacent copper features because the 0.50 mm package pitch limits assembly clearance. Inspect solder joints after reflow, particularly on the oscillator, programming and analog-input pins where access or thermal cycling can affect reliability.

Route the four analog inputs away from switching nodes, relay contacts, clock lines and high-current return paths. Use a quiet ground reference for A/D input filtering, and place any input network close to the controller to minimize pickup. The four-channel 8-bit converter is intended for compact control signals, so input conditioning must keep source impedance and settling behavior compatible with the acquisition sequence.

Do not treat the -E suffix as a universal substitute for every PIC16F716 ordering code, and do not interchange the /SS package with /SO or other package options without checking the PCB footprint. Confirm the programming interface, oscillator configuration, I/O assignments and temperature limits in DS41206B. The 128-byte RAM limit also makes stack and buffer-depth checks important for firmware stability.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The exact compliance declarations for PIC16F716-E/SS must be confirmed through the manufacturer's product documentation or a current compliance statement.

Kaugnay na Hanapin

PIC16F716 datasheet PIC16F716 inverter circuit PIC16F716 projects PIC16F716 programming PIC16F716 datasheet pdf PIC16F716 programmer PIC16F716 pdf PIC16F716-E/SS pinout PIC16F716-E/SS replacement PIC16F716-E/SS equivalent PIC16F716-E/SS price PIC16F716-E/SS stock PIC16F716 20MHz SSOP PIC16F716 vs PIC16F716-I/SS

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology PIC16F716-E/SS PIC16F716-I/SS PIC16F716 PIC16 microcontroller family 8-bit RISC microcontroller Flash-based microcontroller embedded microcontroller semiconductor 20-pin SSOP surface-mount package 8-bit A/D converter enhanced capture enhanced compare PWM 20 MHz clock 3.5 KB Flash 128-byte RAM 2.5 V to 5.5 V supply automotive control industrial control appliance control consumer electronics DS41206B
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ