PIC24EP32GP204-H/TL - 32KB Flash 16-bit MCU 44-Pin | Microchip
MPN: PIC24EP32GP204-H/TL ✓ NakahandaPIC24EP32GP204-H/TL Ulas
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), and programmable I/O peripherals. The PIC24EP family belongs to Microchip's 16-bit dsPIC/PIC24E architecture hierarchy: microcontroller -> 16-bit MCU -> PIC24E family -> PIC24EP sub-family -> general purpose tier. This taxonomy places the PIC24EP between the older PIC24F and the higher-end dsPIC33E families in both performance and on-chip analog integration.
Key differentiating features include enhanced ADC performance with up to 12-bit resolution and 1.1 Msps conversion rate, on-chip op-amps, Charge Time Measurement Unit (CTMU) for capacitive touch and accurate time measurement, Peripheral Trigger Generator (PTG) for hardware event sequencing, and high-speed PWM with independent time bases. These blocks are uncommon in competing 16-bit MCUs at this price/performance tier and reduce external component count for motor control and power conversion designs.
The PIC24E core uses a 16-bit modified Harvard architecture with a 24-bit instruction word, allowing most instructions to execute in a single cycle and supporting DSP-oriented operations. The 70 MIPS performance, combined with 32 KB self-programmable Flash and 4 KB SRAM, supports real-time control loops up to several kHz while leaving headroom for communication stacks (UART, SPI, I2C) and user interfaces.
Typical applications include automotive body electronics and sensor conditioning, BLDC/PMSM motor control (fans, pumps, small appliances), digital power supplies, LED lighting controllers, industrial sensor hubs, and consumer appliances requiring extended-temperature operation. The integrated op-amps and CTMU allow direct interfacing with current-shunt resistors and capacitive sensors without external analog ICs.
When designing with this device, allocate decoupling per Microchip's recommended layout: 100 nF ceramic on each VDD/AVDD pair within 5 mm of the pin, plus a bulk 10 uF near the supply entry. The exposed thermal pad (EP) must be soldered to a continuous ground plane for both thermal dissipation and electrical reference per the package guidelines.
Mga alternatibo na pwedeng ilagay na PIC24EP32GP204-H/TL — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC24EP32GP204-H/TL (parehas na form factor at footprint) — pagkakaiba sa Package, ADC, RoHS Status, Core Architecture, Operating Voltage.
PIC24EP32GP204-I/TL
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC24EP32GP203-H/TL
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC24EP32GP204-H/ML
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
PIC24EP32GP204T-H/TL
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
dsPIC33EP32GP204-H/TL
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
PIC24EP32MC204-H/TL
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →PIC24EP32GP204-H/TL Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | PIC24E (16-bit modified Harvard) |
| Program Memory (Flash) | 32 KB |
| Data Memory (RAM) | 4 KB |
| Maximum CPU Speed | 60 MHz / 70 MIPS |
| Hanay ng Temperature na Operasyon | -40C to +150C (H grade) |
| Packhaging | 44-pin VTLA Exposed Pad (TL) |
| Uri ng Pagpapasok | Surface Mount |
| ADC | 12-bit, up to 1.1 Msps (per family datasheet) |
| On-chip Op-Amps | Yes |
| CTMU | Yes (Charge Time Measurement Unit) |
| Peripheral Trigger Generator (PTG) | Yes |
| High-Speed PWM | Yes |
| Automotive Qualification | AEC-Q100 (H grade) |
| Tindminan RoHS | Compliant (per distributor listings) |
| Lead-Free | Yes |
Gabay sa Pin Configuration ng PIC24EP32GP204-H/TL 44-pin vtla exposed pad (tl)
Pin configuration para sa PIC24EP32GP204-H/TL (44-pin vtla exposed pad (tl) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC24EP32GP204-H/TL.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC24EP32GP204-H/TL ay nararapat para sa 6 aplikasyons: Automotive Body Electronics, BLDC/PMSM Motor Control, Industrial Sensor Hubs, Digital Power Supply (SMPS) Control, LED Lighting Controllers, Capacitive Touch HMI.
Automotive Body Electronics
The PIC24EP32GP204-H/TL's AEC-Q100 qualification and -40C to +150C operating envelope make it well-suited for body controllers, lighting modules, and seat/HVAC actuators. Its 32 KB Flash accommodates CAN/LIN stack plus application logic, while on-chip op-amps condition sensor inputs directly. Compared to general-purpose I-grade MCUs, the H-grade screening ensures reliable operation behind the dashboard and in door modules where temperatures routinely exceed 100C in summer.
Inirekomenda
BLDC/PMSM Motor Control
The PIC24EP32GP204-H/TL's high-speed PWM, integrated op-amps for current sensing, and 12-bit 1.1 Msps ADC deliver a complete sensorless or Hall-sensor FOC platform for small fans, pumps, and appliance motors. The 70 MIPS core sustains 20 kHz FOC loops with margin for speed PI and state-machine overhead. The 32 KB Flash holds motor parameter tables and field-weakening algorithms without external memory, while H-grade qualification extends deployment to automotive cooling fans.
Inirekomenda
Industrial Sensor Hubs
With its CTMU for capacitive and timing measurements, 12-bit ADC, and multiple op-amps, the PIC24EP32GP204-H/TL consolidates analog front-end and MCU functions for industrial sensor hubs and process transmitters. The 70 MIPS performance handles Modbus RTU, IO-Link, and proprietary protocols alongside background sensor sampling. The H-grade envelope supports deployment near motors or in outdoor enclosures where ambient temperature swings are significant.
Inirekomenda
Digital Power Supply (SMPS) Control
The PIC24EP32GP204-H/TL's high-speed PWM with configurable triggers, 1.1 Msps ADC, and PTG hardware event sequencer enable digital control of DC-DC converters, PFC stages, and LLC resonant converters. The op-amps condition current-mode feedback directly, eliminating external amplifiers. AEC-Q100 qualification supports onboard EV chargers and telecom 48V bus converters where thermal headroom and reliability are critical design constraints.
Inirekomenda
LED Lighting Controllers
The PIC24EP32GP204-H/TL drives multi-channel LED strings with independent PWM dimming, color-mixing firmware, and analog current sensing via the integrated op-amps. The 32 KB Flash holds DMX, DALI, or proprietary lighting protocols while leaving room for thermal-compensation lookup tables. Automotive headlamp controllers and architectural RGBW luminaires benefit from the -40C to +150C operating range, eliminating derating near hot LED arrays.
Inirekomenda
Capacitive Touch HMI
The PIC24EP32GP204-H/TL's CTMU combined with the 12-bit ADC implements robust capacitive touch keypads, sliders, and proximity sensors without dedicated touch ICs. Hardware-event sequencing via the PTG reduces CPU overhead, freeing MIPS for HMI graphics or communication. The H-grade rating permits touch panels near heat-generating components such as motor drivers or power-conversion stages in industrial and automotive HMIs.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC24EP32GP204-H/TL — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC24EP32GP204-I/TL | PIC24EP32GP203-H/TL | PIC24EP32GP204-H/ML | PIC24EP32GP204T-H/TL | dsPIC33EP32GP204-H/TL | PIC24EP32MC204-H/TL |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-pin VTLA Exposed Pad | 44-pin VTLA Exposed Pad - same | 44-pin VTLA Exposed Pad - same | 44-pin QFN (ML) - same pin count | 44-pin VTLA Exposed Pad - same | 44-pin VTLA Exposed Pad - same | 44-pin VTLA Exposed Pad - same |
| Operating Temperature | -40C to +150C (H grade) | -40C to +85C (I grade) | -40C to +150C (H grade) | -40C to +150C (H grade) | -40C to +150C (H grade) | -40C to +150C (H grade) | -40C to +150C (H grade) |
| Flash Memory | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB | 32 KB |
| RAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Maximum CPU Speed | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS | 60 MHz / 70 MIPS |
| DSP Engine | No (PIC24E core) | No | No | No | No | Yes (dsPIC33E core) | No |
| AEC-Q100 Qualified | Yes (H grade) | No (I grade) | Yes (H grade) | Yes (H grade) | Yes (H grade) | Yes (H grade) | Yes (H grade) |
Pangunahing mga Pagkakaiba
- AEC-Q100 H-grade qualification with -40C to +150C range (kumpara saPIC24EP32GP204-I/TL)
- 44-pin VTLA Exposed Pad package option (kumpara saPIC24EP32GP204-H/ML (QFN variant))
- PIC24E core without DSP engine vs dsPIC33E upgrade path (kumpara sadsPIC33EP32GP204-H/TL)
- Integrated op-amps + CTMU + PTG (kumpara saPIC24EP32GP203-H/TL)
Talaan ng Disenyo
Place a 100 nF decoupling ceramic capacitor on each VDD/AVDD pin pair within 5 mm of the package pin, and add a single 10 uF bulk capacitor near the supply entry point per Microchip PIC24E layout guidelines. The on-chip op-amps draw transient currents during switching; insufficient decoupling can couple noise into the ADC reference and degrade SNR. For H-grade designs operating above +125C, use X7R or X8R dielectrics rated to +150C.
The 44-pin VTLA Exposed Pad package requires the EP to be soldered to a continuous ground plane with thermal vias to inner planes. Estimated: at 70 MIPS full-load CPU activity with all peripherals active, internal dissipation stays well below 0.5 W, but at +150C ambient the junction-to-ambient thermal rise must remain within the package theta_JA to avoid thermal shutdown. Always refer to the package thermal model in the family datasheet for the specific board conditions.
Route analog input traces (ADC, op-amp) away from PWM switching traces and clock lines; use a ground guard trace or ground fill between analog and digital sections to minimize crosstalk. Keep the ADC reference decoupling capacitor within 3 mm of the AVSS/VREF+ pins. Follow Microchip's analog design checklist in the family datasheet for noise-floor optimization on the 12-bit ADC.
Do not assume the I-grade PIC24EP32GP204-I/TL is a drop-in for the H-grade when the application exceeds +85C; the I-grade part is not AEC-Q100 qualified and may fail early-life reliability testing. Also avoid driving the op-amp outputs beyond the AVDD rail - the on-chip op-amps are not rail-to-rail on the high side and clipping will distort sensor feedback in motor-control loops.
Impormasyon ng Pagsunod sa Kautusan
AEC-Q100 qualified per the H-grade designation. RoHS and lead-free per distributor listings (besenchips.com, valleyelc.com). Halogen-free status not explicitly stated in the verified web data.
