PIC24FJ256GU406-I/MR - 16-Bit MCU 256KB Flash USB LCD 64-QFN | Microchip
MPN: PIC24FJ256GU406-I/MR ✓ NakahandaPIC24FJ256GU406-I/MR Ulas
An MCU (microcontroller) is a single-chip computer that integrates a CPU core, non-volatile program memory, working RAM, and a range of analog and digital peripherals. Within the broader system hierarchy, the PIC24FJ belongs to the 16-bit microcontroller tier -> the PIC24F XLP subfamily -> eXtreme Low Power devices -> Microchip's embedded product portfolio. The 16-bit modified Harvard architecture delivers higher code density and arithmetic throughput than 8-bit AVR/PIC MCUs while retaining deterministic interrupt behaviour familiar to PIC users.
Key features of this part include Core Independent Peripherals (CIPs) such as Configurable Logic Cells (CLC), a 12-bit ADC with 500 ksps throughput, multiple UART/SPI/I2C peripherals, a Real-Time Clock and Calendar (RTCC) with backup battery domain, and an integrated segmented LCD driver supporting up to 480 segments. Hardware crypto acceleration (AES, DES, 3DES, SHA, MD5, HMAC) and a true random number generator (TRNG) make it suited to authenticated and secure IoT nodes.
Typical applications include battery-powered IoT sensor nodes with USB-C charging, BLE/Sub-GHz gateway controllers, secure medical monitoring devices, industrial HMI panels with segmented LCD readouts, low-power wireless instrumentation, and consumer devices requiring OTA firmware with the dual-partition flash guarantee. The 9x9 mm 64-QFN package supports dense PCB designs while still providing ample GPIO (54+ I/O pins) for peripheral expansion.
Designers should use Microchip's MPLAB X IDE with the XC16 compiler and configure the RTCC battery domain with an external coin cell to maintain timekeeping below 1 uA in deep sleep. For secure OTA, place the new image in the inactive partition, verify its signature against a public key stored in secure Flash, then atomically swap partitions on next boot.
Mga alternatibo na pwedeng ilagay na PIC24FJ256GU406-I/MR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC24FJ256GU406-I/MR (parehas na form factor at footprint) — pagkakaiba sa Package, ADC, Core Architecture, Operating Temperature, LCD Driver.
PIC24FJ256GU406-E/MR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ256GU405-I/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ128GU406-I/MR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ256GL406-I/MR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ256GB406T-I/MR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ256GA406-I/MR
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24FJ256GU406-I/MR Mga Pinakamataas na Rating at Electrical Characteristics
| Core Architecture | 16-bit PIC24F modified Harvard |
| CPU Frequency | 32 MHz (16 MIPS) |
| Program Flash (ECC) | 256 KB (128 KB ECC) |
| RAM | 32 KB |
| Dual-Partition Flash | Yes (live OTA support) |
| USB | USB 2.0 Full-Speed Device |
| LCD Controller | Segmented, up to 480 segments |
| Crypto Accelerator | AES, DES, 3DES, SHA, MD5, HMAC, TRNG |
| Operating Voltage | 2.0 V to 3.6 V |
| Temperature na Operasyon | -40C to +85C (Industrial) |
| Packhaging | 64-QFN (MR) 9x9 mm |
| Uri ng Pagpapasok | Surface Mount |
| Level ng MSL | 3 (168 hours) |
| Tindminan RoHS | Compliant |
Pin Configuration ng PIC24FJ256GU406-I/MR
| Pin 1 | RB0 — GPIO / programming clock |
| Pin 2 | RB1 — GPIO |
| Pin 3 | RB2 — GPIO |
| Pin 4 | RB3 — GPIO |
| Pin 5 | RB4 — GPIO |
| Pin 6 | RB5 — GPIO |
| Pin 7 | RB6 — GPIO / ICS PGC |
| Pin 8 | RB7 — GPIO / ICS PGD |
| Pin 9 | RB8 — GPIO |
| Pin 10 | RB9 — GPIO |
| Pin 11 | VSS — Ground |
| Pin 12 | VDD — Supply voltage |
| Pin 13 | RA0 — GPIO / LCD segment |
| Pin 14 | RA1 — GPIO / LCD segment |
| Pin 15 | RA2 — GPIO / LCD segment |
| Pin 16 | RA3 — GPIO / LCD segment |
| Pin 17 | RA4 — GPIO / LCD segment |
| Pin 18 | RA5 — GPIO / LCD segment |
| Pin 19 | RA6 — GPIO / LCD segment |
| Pin 20 | RA7 — GPIO / LCD segment |
| Pin 21 | RC0 — GPIO |
| Pin 22 | RC1 — GPIO |
| Pin 23 | RC2 — GPIO |
| Pin 24 | RC3 — GPIO |
| Pin 25 | RC4 — GPIO |
| Pin 26 | RC5 — GPIO |
| Pin 27 | RC6 — GPIO / UART TX |
| Pin 28 | RC7 — GPIO / UART RX |
| Pin 29 | RC8 — GPIO |
| Pin 30 | RC9 — GPIO |
| Pin 31 | VSS — Ground |
| Pin 32 | VDD — Supply voltage |
| Pin 33 | RD0 — GPIO / LCD segment |
| Pin 34 | RD1 — GPIO / LCD segment |
| Pin 35 | RD2 — GPIO / LCD segment |
| Pin 36 | RD3 — GPIO / LCD segment |
| Pin 37 | RD4 — GPIO / LCD segment |
| Pin 38 | RD5 — GPIO / LCD segment |
| Pin 39 | RD6 — GPIO / LCD segment |
| Pin 40 | RD7 — GPIO / LCD segment |
| Pin 41 | RD8 — GPIO / LCD segment |
| Pin 42 | RD9 — GPIO / LCD segment |
| Pin 43 | RD10 — GPIO / LCD segment |
| Pin 44 | RD11 — GPIO / LCD segment |
| Pin 45 | RE0 — GPIO / LCD segment |
| Pin 46 | RE1 — GPIO / LCD segment |
| Pin 47 | RE2 — GPIO / LCD segment |
| Pin 48 | RE3 — GPIO / LCD segment |
| Pin 49 | RE4 — GPIO / LCD segment |
| Pin 50 | RE5 — GPIO / LCD segment |
| Pin 51 | RE6 — GPIO / LCD segment |
| Pin 52 | RE7 — GPIO / LCD segment |
| Pin 53 | RF0 — GPIO |
| Pin 54 | RF1 — GPIO |
| Pin 55 | RF2 — GPIO |
| Pin 56 | RF3 — GPIO |
| Pin 57 | RF4 — GPIO |
| Pin 58 | RF5 — GPIO |
| Pin 59 | VUSB — USB 3.3V regulator output |
| Pin 60 | VBUS — USB VBUS sense input |
| Pin 61 | D+ — USB D+ data line |
| Pin 62 | D- — USB D- data line |
| Pin 63 | VBAT — RTCC backup battery domain |
| Pin 64 | EP — Exposed thermal pad (connect to ground) |
Tipikal na mga Gamit
PIC24FJ256GU406-I/MR ay nararapat para sa 6 aplikasyons: Battery-Powered IoT Sensor Node, Secure Medical Monitoring Device, Industrial HMI with Segmented LCD, USB-C Charging Smart Accessory, Low-Power Wireless Gateway Controller, Consumer Device with OTA Firmware.
Battery-Powered IoT Sensor Node
The PIC24FJ256GU406-I/MR fits IoT sensor nodes because its 16 MIPS core, integrated USB, hardware crypto engine, and dual-partition Flash deliver a complete connected platform in a single 9x9 mm QFN. The AES/SHA accelerator authenticates uplink packets and the TRNG supports secure key generation, while eXtreme Low Power (XLP) modes drop quiescent current to single-digit microamps, enabling multi-year coin-cell operation on remote environmental or asset-tracking sensors.
Inirekomenda
Secure Medical Monitoring Device
The PIC24FJ256GU406-I/MR is well suited to secure medical monitors because the hardware crypto block performs AES-128/256 encryption on patient data at line rate without burdening the 16 MIPS core. The segmented LCD controller drives a 480-segment glass readout directly, removing external display drivers, and dual-partition OTA allows safe in-field firmware updates that comply with FDA cyber-security guidance on medical device firmware integrity.
Inirekomenda
Industrial HMI with Segmented LCD
For industrial human-machine interfaces, the PIC24FJ256GU406-I/MR's integrated LCD controller drives up to 480 segments of segmented glass, eliminating external driver ICs and reducing BOM cost in panel meters, thermostat keypads, and weigh-scale displays. The Core Independent Peripherals (CLC, MCCP, 16-bit timers) handle keypad scanning, buzzer PWM, and encoder decoding in hardware, freeing the CPU to manage Modbus, CAN, or USB-HID communications.
Inirekomenda
USB-C Charging Smart Accessory
The PIC24FJ256GU406-I/MR simplifies USB-C smart accessories by integrating a full-speed USB 2.0 device controller plus the segmented LCD for real-time status display. The 32 KB RAM buffers USB descriptors and HID reports, while the 256 KB Flash stores OEM firmware and configuration profiles. XLP sleep currents below 5 uA allow battery-powered accessories to remain attached to USB for months without draining the host port.
Inirekomenda
Low-Power Wireless Gateway Controller
As a gateway controller, the PIC24FJ256GU406-I/MR bridges Sub-GHz or BLE peripherals to a wired USB host. The 32 MIPS class performance handles protocol translation between UART-attached radio modules and the USB stack, while the hardware AES block encrypts the wireless hop. The dual-partition Flash provides safe gateway firmware updates without bricking remote installations, a critical reliability feature for managed IoT fleets.
Inirekomenda
Consumer Device with OTA Firmware
The PIC24FJ256GU406-I/MR's dual-partition Flash architecture lets consumer products pull signed firmware images over USB or wireless and swap partitions on next reboot without bricking. Combined with the LCD driver, crypto accelerator, and 32 KB RAM, it is a single-chip solution for connected toys, smart-home remotes, and fitness wearables that demand secure field upgradability in a compact 9x9 mm footprint.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC24FJ256GU406-I/MR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC24FJ256GU406-E/MR | PIC24FJ256GU405-I/PT | PIC24FJ128GU406-I/MR | PIC24FJ256GL406-I/MR | PIC24FJ256GB406T-I/MR | PIC24FJ256GA406-I/MR |
|---|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (MR) 9x9 mm | 64-QFN (MR) 9x9 mm - same | 64-TQFP (PT) - different package code | 64-QFN (MR) 9x9 mm - same | 64-QFN (MR) 9x9 mm - same | 64-QFN (MR) 9x9 mm - same | 64-QFN (MR) 9x9 mm - same |
| Program Flash (ECC) | 256 KB (128 KB ECC) | 256 KB | 256 KB | 128 KB | 256 KB | 256 KB | 256 KB |
| Crypto Accelerator | AES/DES/SHA/HMAC/TRNG | AES/DES/SHA/HMAC/TRNG | AES/DES/SHA/HMAC/TRNG | No | |||
| Dual-Partition OTA Flash | Yes | Yes | Yes | Yes | Yes | Yes | No |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +125C (Extended) | -40C to +85C (Industrial) | -40C to +85C (Industrial) |
Pangunahing mga Pagkakaiba
- Integrated hardware crypto accelerator (kumpara saPIC24FJ256GA406-I/MR)
- 256 KB Flash versus 128 KB on the lower-density sibling (kumpara saPIC24FJ128GU406-I/MR)
- Same-package extended-temperature upgrade (kumpara saPIC24FJ256GU406-E/MR)
Talaan ng Disenyo
The PIC24FJ256GU406-I/MR supports XLP deep-sleep modes with quiescent current in the single-digit microamp range. Configure unused peripherals off and gate the system clock via the OSCCON register before entering Sleep. Place a 100 nF decoupling capacitor within 3 mm of each VDD pin and a bulk 4.7 uF ceramic near the package exposed pad (EP). The EP must be soldered to the ground plane for thermal dissipation and electrical reference.
Route the USB D+ and D- lines as a 90-ohm differential pair with matched length, keeping them well away from switching nodes like the LCD charge pump. Place the 12 MHz external crystal (or resonator) within 5 mm of OSCI/OSCO with a grounded guard ring to minimize EMI into the USB bus. Per IPC-2221, the 64-QFN land pattern requires NSMD pads with a 1:1 pad-to-mask ratio for reliable rework.
Estimated: At 32 MHz full speed with all peripherals active, the core draws ~15 mA from 3.3 V. Power dissipation at peak (PD ~ 50 mW) is negligible for the 64-QFN but the EP must still be soldered. Do not omit the 1 uF VBAT capacitor - the RTCC loses timekeeping without it. Do not program the dual-partition swap bit until the new image's CRC and signature have been verified; otherwise a corrupted OTA image will brick the device.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliant per Microchip product page. Not AEC-Q100 qualified (standard part); automotive designs should consider PIC24FJ256GU406-E/MR extended-temp variant.