R5F104GEANA#20 - 32MHz 64KB RL78/G14 MCU | Renesas
MPN: R5F104GEANA#20 ✓ NakahandaR5F104GEANA#20 Ulas
A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripheral interfaces onto one semiconductor device. The RL78 family is based on a compact 16-bit architecture and belongs to the broader low-power embedded-control hierarchy. Its operating voltage, processing rate, and mixed-signal peripherals make it suitable for battery-powered instruments, industrial meters, and compact control nodes.
Key features of the R5F104GEANA#20 include 32 MHz operation, 64 KB of flash, 44 DMIPS of compute performance, and an operating range of 1.6 V to 5.5 V. The RL78/G14 platform is designed for low-power operation, with a cited platform consumption of 66 µA/MHz during operation and 0.60 µA when running only the RTC and low-voltage detector. Integrated A/D converter, UART, and SPI functions reduce the need for external interface components.
The 16-bit CPU architecture balances computational capability with compact code and energy-efficient execution. At 32 MHz, the device provides substantially more timing margin than lower-rate general-purpose MCUs for motor-control loops, metering, signal conditioning, and communications. Its 48-HWQFN package also supports dense PCB layouts, although the exposed-pad land pattern and thermal design must follow the package drawing carefully.
Typical applications include brushless DC motor controllers, compact energy meters, industrial sensor nodes, low-power IoT endpoints, appliance control boards, and portable measurement instruments. The MCU is particularly appropriate when designers need multiple serial interfaces and ADC capability in a single low-power package.
For a new layout, route the exposed thermal pad to a properly sized ground plane and place decoupling capacitors close to the supply pins. If replacing an existing board, compare the 48-HWQFN land pattern, exposed-pad requirements, clock configuration, and firmware support rather than assuming that every RL78/G14 ordering code is interchangeable.
This page combines the manufacturer product information, distributor identification, package details, application guidance, and verified substitute information. It also distinguishes the target ordering code from related RL78/G14 variants and highlights the checks needed for a reliable PCB-level replacement decision.
Mga alternatibo na pwedeng ilagay na R5F104GEANA#20 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
R5F104GEANA#U0
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F104GEANA#V0
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F104GEANA#40
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F104GEGNA#W0
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
R5F104GEANA#20 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 16-bit microcontroller IC |
| Product Series | RL78/G14 |
| Maximum CPU Frequency | 32 MHz |
| Code Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| Core Architecture | 16-bit RL78 |
| Operating Voltage Range | 1.6 V to 5.5 V |
| Compute Performance | 44 DMIPS at 32 MHz |
| Active Platform Current | 66 µA/MHz |
| RTC and LVD Mode Current | 0.60 µA |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C |
| Packhaging | 48-HWQFN, 7 x 7 mm |
| Uri ng Pagpapasok | Surface mount |
| Analog Interface | A/D converter |
| Serial Interfaces | UART and SPI |
| Primary Applications | Motor control, industrial, and metering |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng R5F104GEANA#20 48-hwqfn, 7 x 7 mm
Pin configuration para sa R5F104GEANA#20 (48-hwqfn, 7 x 7 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa R5F104GEANA#20.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
R5F104GEANA#20 ay nararapat para sa 6 aplikasyons: Brushless DC Motor Control, Smart Energy Metering, Industrial Sensor Node, Low-Power IoT Endpoint, Battery-Powered Measurement Instrument, Appliance Control Board.
Brushless DC Motor Control
The R5F104GEANA#20 fits compact brushless DC motor controllers because its 16-bit RL78/G14 core operates at 32 MHz and delivers 44 DMIPS, leaving useful processing margin for commutation, current control, and fault handling. The 1.6 V to 5.5 V operating range supports low-voltage motor systems, while integrated ADC, UART, and SPI interfaces can connect position sensing, gate-driver monitoring, and host diagnostics. In a typical implementation, the MCU executes the control loop and reads current or position data through its ADC and serial interfaces. The principal design consideration is preserving control-loop timing while routing the exposed pad and motor-power grounds to minimize switching noise.
Inirekomenda
Smart Energy Metering
The R5F104GEANA#20 is appropriate for energy-metering and load-monitoring products that combine measurement, local processing, and secure communications. Its 16-bit architecture and 32 MHz clock can process sampled values and control displays or communication tasks, while the integrated ADC provides a path for analog front-end signals. UART and SPI permit connection to a metering transceiver, display controller, or external nonvolatile memory. Operating from 1.6 V to 5.5 V supports both low-voltage sensor nodes and regulated industrial meters. Low-power behavior is especially useful in distributed metering systems, where the cited 0.60 µA RTC-and-LVD operating mode can help preserve standby energy.
Inirekomenda
Industrial Sensor Node
The R5F104GEANA#20 can serve as the control center of an industrial sensor node that must acquire analog measurements and transfer data over a local network. Its 32 MHz 16-bit core supports filtering, calibration, diagnostics, and protocol handling, while ADC, UART, and SPI connectivity reduces the number of external devices. The 48-HWQFN package preserves board area in compact instrumentation, although its exposed pad requires careful thermal and layout treatment. For a field-deployed node, engineers should use the 1.6 V to 5.5 V operating range to design the power architecture, budget current for radio activity, and confirm that standby current remains compatible with the available energy budget.
Inirekomenda
Low-Power IoT Endpoint
The R5F104GEANA#20 is suitable for a low-power IoT endpoint that gathers local sensor information and communicates through a serial radio module. Its 66 µA/MHz active-platform consumption figure supports efficient control processing, and the MCU can remain in a minimal RTC-and-LVD state at 0.60 µA when continuous processing is unnecessary. UART and SPI simplify attachment to wireless and storage devices, while the ADC handles analog sensor inputs. The design should use a duty cycle that keeps radio and sensor duty cycles separate from the MCU's active interval. Confirming actual current at the system level remains essential because regulator quiescent current, pull networks, and radio transmission dominate energy use in many endpoint designs.
Inirekomenda
Battery-Powered Measurement Instrument
The R5F104GEANA#20 fits battery-powered instruments that combine acquisition, computation, and a local human interface. Its 16-bit CPU at 32 MHz provides sufficient throughput for sensor conversion sequencing, numerical processing, and menu or display updates, while the 64 KB code flash provides room for application firmware. The 1.6 V minimum supply supports energy-conscious designs, and the low-power platform characteristics help extend time between battery replacements. UART can connect a display or configuration port, while SPI can serve external memory or a higher-speed sensor. The board should include a regulator with suitable efficiency, a low-leakage analog path, and a shutdown strategy that disables unused peripherals during long measurement intervals.
Inirekomenda
Appliance Control Board
The R5F104GEANA#20 can serve as the primary controller in a compact appliance or equipment-control board. Its 32 MHz processing rate supports real-time motor, valve, heater, or user-interface control, while the integrated ADC, UART, and SPI provide practical paths for analog sensing, diagnostics, and external peripherals. The 48-HWQFN package is useful where board space is constrained, and the 1.6 V to 5.5 V range accommodates low-voltage control domains. Designers should isolate noisy switching stages from analog and clock traces, provide local decoupling at every supply pin, and verify that the exposed pad's thermal path can handle both processor and board-level heat sources without affecting adjacent components.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for R5F104GEANA#20 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | R5F104GEANA#U0 | R5F104GEANA#V0 | R5F104GEANA#40 | R5F104GEGNA#W0 |
|---|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Series | RL78/G14 | RL78/G14 | RL78/G14 | RL78/G14 | RL78/G14 |
| Ordering Condition | R5F104GEANA#20 | R5F104GEANA#U0 | R5F104GEANA#V0 | R5F104GEANA#40 | R5F104GEGNA#W0 |
Pangunahing mga Pagkakaiba
- Exact 32 MHz RL78/G14 configuration (kumpara saR5F104GEGNA#W0)
- Directly indexed same-package ordering candidate (kumpara saR5F104GEANA#U0)
- Low-voltage operation supports compact embedded systems (kumpara saR5F104GEANA#V0)
- Integrated control and communications reduce external circuitry (kumpara saR5F104GEANA#40)
Talaan ng Disenyo
The 48-HWQFN package requires attention to its exposed thermal pad. Follow the Renesas package drawing for pad dimensions, solder-mask clearance, and paste stencil. Join the exposed pad to a low-impedance ground plane rather than leaving it isolated. Estimated thermal performance depends on the PCB copper area, airflow, and neighboring heat sources, so calculate the junction-temperature rise from the actual board layout instead of relying only on the package outline.
Place all required decoupling capacitors close to the corresponding device supply terminals, with the shortest practical return path through the ground plane. Separate noisy switching nodes and motor-drive returns from ADC inputs and clock signals. Because the package has 48 terminals on a 7 x 7 mm body, use the manufacturer land pattern and confirm pin 1 orientation against the PCB silkscreen before fabrication. Do not create a footprint only from the body dimensions.
Do not substitute another R5F104 ordering code solely because the family name and nominal package match. Confirm the exposed-pad geometry, terminal assignment, temperature condition, quality designation, clock configuration, and firmware assumptions for each suffix. Also check the operating voltage and ensure that the complete supply remains within 1.6 V to 5.5 V during startup, load transitions, and sleep transitions. A footprint-only comparison is insufficient for a production substitution.
Design the power tree around the 1.6 V minimum operating voltage and use the MCU's low-power modes only after accounting for external circuit consumption. The cited 0.60 µA applies to the RTC-and-LVD operating condition, not the entire assembled product. Regulator quiescent current, pull resistors, ADC circuitry, sensors, and communications can dominate system consumption. Measure sleep, acquisition, and active modes on the final board to verify that the energy budget is realistic.
Keep ADC traces short and route them away from switching-regulator, relay, and motor-drive nodes. Provide a quiet ground reference for analog inputs and use the package ground and exposed-pad structure to establish a low-impedance return. If SPI or other high-speed signals leave the device, inspect series termination, clock-source jitter, and return-path continuity. The 32 MHz CPU clock requires a clean power and ground reference to avoid timing or communication errors.
Impormasyon ng Pagsunod sa Kautusan
The product listing identifies the target as RoHS compliant. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement is established for this ordering code.