Renesas Electronics

R5F104GEANA#20 - 32MHz 64KB RL78/G14 MCU | Renesas

MPN: R5F104GEANA#20 ✓ Aktif
1.6 V to 5.5 V Vdss 66 µA/MHz Id 48-HWQFN, 7 x 7 mm Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

R5F104GEANA#20 Genel Bakış

The Renesas Electronics R5F104GEANA#20 is a 16-bit RL78/G14 general-purpose microcontroller operating at up to 32 MHz, with 64 KB of code flash and a 48-HWQFN surface-mount package measuring 7 x 7 mm. The device supports a 1.6 V to 5.5 V operating range and is positioned for low-power motor-control, industrial, metering, and IoT equipment.

A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripheral interfaces onto one semiconductor device. The RL78 family is based on a compact 16-bit architecture and belongs to the broader low-power embedded-control hierarchy. Its operating voltage, processing rate, and mixed-signal peripherals make it suitable for battery-powered instruments, industrial meters, and compact control nodes.

Key features of the R5F104GEANA#20 include 32 MHz operation, 64 KB of flash, 44 DMIPS of compute performance, and an operating range of 1.6 V to 5.5 V. The RL78/G14 platform is designed for low-power operation, with a cited platform consumption of 66 µA/MHz during operation and 0.60 µA when running only the RTC and low-voltage detector. Integrated A/D converter, UART, and SPI functions reduce the need for external interface components.

The 16-bit CPU architecture balances computational capability with compact code and energy-efficient execution. At 32 MHz, the device provides substantially more timing margin than lower-rate general-purpose MCUs for motor-control loops, metering, signal conditioning, and communications. Its 48-HWQFN package also supports dense PCB layouts, although the exposed-pad land pattern and thermal design must follow the package drawing carefully.

Typical applications include brushless DC motor controllers, compact energy meters, industrial sensor nodes, low-power IoT endpoints, appliance control boards, and portable measurement instruments. The MCU is particularly appropriate when designers need multiple serial interfaces and ADC capability in a single low-power package.

For a new layout, route the exposed thermal pad to a properly sized ground plane and place decoupling capacitors close to the supply pins. If replacing an existing board, compare the 48-HWQFN land pattern, exposed-pad requirements, clock configuration, and firmware support rather than assuming that every RL78/G14 ordering code is interchangeable.

This page combines the manufacturer product information, distributor identification, package details, application guidance, and verified substitute information. It also distinguishes the target ordering code from related RL78/G14 variants and highlights the checks needed for a reliable PCB-level replacement decision.

Drop-in alternatifler için R5F104GEANA#20 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

R5F104GEANA#U0

✅ Yerleştirme
📦 48-HWQFN (7x7)
Same indexed 32 MHz RL78/G14 architecture and 64 KB flash; ordering condition differs by 0 percentage points in the stated core parameters

📋 Katalogda Olmayan Referans Alternatifi

R5F104GEANA#V0

✅ Yerleştirme
📦 48-HWQFN (7x7)
Same RL78/G14 family and 48-HWQFN footprint; verified core parameter differences are 0 percentage points, with ordering condition requiring confirmation

📋 Katalogda Olmayan Referans Alternatifi

R5F104GEANA#40

✅ Yerleştirme
📦 48-HWQFN (7x7)
Same RL78/G14 platform and package family; verified core differences are 0 percentage points, while the ordering suffix differs

📋 Katalogda Olmayan Referans Alternatifi

R5F104GEGNA#W0

✅ Yerleştirme
📦 48-HWQFN (7x7)
Same 32 MHz RL78/G14 48-HWQFN comparison family; verified core difference is 0 percentage points, but memory and pin details require confirmation

📋 Katalogda Olmayan Referans Alternatifi

R5F104GEANA#20 Maksimum Değerlendirmeler & Elektriksel Özellikler

Product Type 16-bit microcontroller IC
Product Series RL78/G14
Maximum CPU Frequency 32 MHz
Code Flash Memory 64 KB
Flash Organization 64K x 8 bits
Core Architecture 16-bit RL78
Operating Voltage Range 1.6 V to 5.5 V
Compute Performance 44 DMIPS at 32 MHz
Active Platform Current 66 µA/MHz
RTC and LVD Mode Current 0.60 µA
İşletim Sıcaklığı Aralığı -40 °C to +85 °C
Paket 48-HWQFN, 7 x 7 mm
Montaj Türü Surface mount
Analog Interface A/D converter
Serial Interfaces UART and SPI
Primary Applications Motor control, industrial, and metering
RoHS Durumu Compliant

R5F104GEANA#20 48-hwqfn, 7 x 7 mm Pin Yapısı Kılavuzu

R5F104GEANA#20 (48-hwqfn, 7 x 7 mm paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

48-hwqfn, 7 x 7 mm paket pin çizelgesi için R5F104GEANA#20

Ayrıntılı pin çıkış verisi mevcut değil: R5F104GEANA#20.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

R5F104GEANA#20 için uygundur 6 uygulamas: Brushless DC Motor Control, Smart Energy Metering, Industrial Sensor Node, Low-Power IoT Endpoint, Battery-Powered Measurement Instrument, Appliance Control Board.

🏭

Brushless DC Motor Control

The R5F104GEANA#20 fits compact brushless DC motor controllers because its 16-bit RL78/G14 core operates at 32 MHz and delivers 44 DMIPS, leaving useful processing margin for commutation, current control, and fault handling. The 1.6 V to 5.5 V operating range supports low-voltage motor systems, while integrated ADC, UART, and SPI interfaces can connect position sensing, gate-driver monitoring, and host diagnostics. In a typical implementation, the MCU executes the control loop and reads current or position data through its ADC and serial interfaces. The principal design consideration is preserving control-loop timing while routing the exposed pad and motor-power grounds to minimize switching noise.

⚡

Smart Energy Metering

The R5F104GEANA#20 is appropriate for energy-metering and load-monitoring products that combine measurement, local processing, and secure communications. Its 16-bit architecture and 32 MHz clock can process sampled values and control displays or communication tasks, while the integrated ADC provides a path for analog front-end signals. UART and SPI permit connection to a metering transceiver, display controller, or external nonvolatile memory. Operating from 1.6 V to 5.5 V supports both low-voltage sensor nodes and regulated industrial meters. Low-power behavior is especially useful in distributed metering systems, where the cited 0.60 µA RTC-and-LVD operating mode can help preserve standby energy.

🧩

Industrial Sensor Node

The R5F104GEANA#20 can serve as the control center of an industrial sensor node that must acquire analog measurements and transfer data over a local network. Its 32 MHz 16-bit core supports filtering, calibration, diagnostics, and protocol handling, while ADC, UART, and SPI connectivity reduces the number of external devices. The 48-HWQFN package preserves board area in compact instrumentation, although its exposed pad requires careful thermal and layout treatment. For a field-deployed node, engineers should use the 1.6 V to 5.5 V operating range to design the power architecture, budget current for radio activity, and confirm that standby current remains compatible with the available energy budget.

🌐

Low-Power IoT Endpoint

The R5F104GEANA#20 is suitable for a low-power IoT endpoint that gathers local sensor information and communicates through a serial radio module. Its 66 µA/MHz active-platform consumption figure supports efficient control processing, and the MCU can remain in a minimal RTC-and-LVD state at 0.60 µA when continuous processing is unnecessary. UART and SPI simplify attachment to wireless and storage devices, while the ADC handles analog sensor inputs. The design should use a duty cycle that keeps radio and sensor duty cycles separate from the MCU's active interval. Confirming actual current at the system level remains essential because regulator quiescent current, pull networks, and radio transmission dominate energy use in many endpoint designs.

📱

Battery-Powered Measurement Instrument

The R5F104GEANA#20 fits battery-powered instruments that combine acquisition, computation, and a local human interface. Its 16-bit CPU at 32 MHz provides sufficient throughput for sensor conversion sequencing, numerical processing, and menu or display updates, while the 64 KB code flash provides room for application firmware. The 1.6 V minimum supply supports energy-conscious designs, and the low-power platform characteristics help extend time between battery replacements. UART can connect a display or configuration port, while SPI can serve external memory or a higher-speed sensor. The board should include a regulator with suitable efficiency, a low-leakage analog path, and a shutdown strategy that disables unused peripherals during long measurement intervals.

🔧

Appliance Control Board

The R5F104GEANA#20 can serve as the primary controller in a compact appliance or equipment-control board. Its 32 MHz processing rate supports real-time motor, valve, heater, or user-interface control, while the integrated ADC, UART, and SPI provide practical paths for analog sensing, diagnostics, and external peripherals. The 48-HWQFN package is useful where board space is constrained, and the 1.6 V to 5.5 V range accommodates low-voltage control domains. Designers should isolate noisy switching stages from analog and clock traces, provide local decoupling at every supply pin, and verify that the exposed pad's thermal path can handle both processor and board-level heat sources without affecting adjacent components.

What are the key specifications of R5F104GEANA#20 that engineers should know?
The R5F104GEANA#20 is a 16-bit RL78/G14 microcontroller rated at 32 MHz, with 64 KB of code flash, a 1.6 V to 5.5 V operating range, and a 48-HWQFN package measuring 7 x 7 mm. The RL78 platform provides 44 DMIPS at 32 MHz and supports integrated ADC, UART, and SPI interfaces. According to the manufacturer datasheet indexed for this part, active-platform consumption is 66 µA/MHz, while RTC-and-LVD-only operation is specified at 0.60 µA.
What is the operating voltage of R5F104GEANA#20?
The R5F104GEANA#20 operates from 1.6 V to 5.5 V. According to the Renesas RL78/G14 manufacturer datasheet, this range applies to the low-power RL78 platform represented by the target device. The 1.6 V lower limit is important for coin-cell, energy-harvesting, and low-voltage industrial designs because the complete board must maintain its supply within that range during startup, transients, and maximum processing load.
How much memory and processing performance does R5F104GEANA#20 provide?
The R5F104GEANA#20 provides 64 KB of code flash organized as 64K x 8 bits and executes at up to 32 MHz. Renesas specifies platform performance of 44 DMIPS at that clock rate. These figures make the device suitable for embedded control routines, serial data handling, motor-control algorithms, and metering functions. The exact RAM capacity and additional memory details should be checked in the pin-specific data tables before sizing a complex application.
What is R5F104GEANA#20 used for?
The R5F104GEANA#20 is intended for low-power general-purpose embedded control, including motor control, industrial equipment, metering, and connected IoT devices. Its 32 MHz 16-bit CPU provides timing performance for control loops, while the integrated A/D converter, UART, and SPI reduce external component count. The manufacturer identifies motor control, industrial applications, and metering as principal use cases for this ordering code.
Where can I download the R5F104GEANA#20 datasheet PDF?
The official R5F104GEANA#20 product documentation is available through the Renesas product page and the indexed manufacturer datasheet PDF. The product page provides the authoritative ordering information, while the PDF contains the RL78/G14 electrical characteristics, architecture, peripheral details, and package information. Use the Renesas PDF for final design decisions because distributor copies can be older revisions or omit device-specific ordering-code details.
Where can I find the R5F104GEANA#20 pinout?
The R5F104GEANA#20 pin assignment is found in the pin-description section and package-drawing section of the Renesas manufacturer datasheet. The device uses a 48-HWQFN package with a 7 x 7 mm body. Because the exposed pad and all 48 terminal assignments must be implemented exactly, use the numbered package drawing when defining the PCB footprint and verify pin directions, supply pins, analog inputs, and debug functions before release.
What can replace R5F104GEANA#20?
R5F104GEANA#U0 and R5F104GEANA#V0 are the closest related drop-in candidates located for the 48-HWQFN RL78/G14 device, and R5F104GEANA#40 is another directly indexed ordering option. The cross-reference results also identify R5F104GEGNA#W0 as a related 48-HWQFN RL78/G14 comparison candidate. These options require verification of the exposed pad, terminal assignment, clock setup, and firmware assumptions before replacement. The number of verified alternatives is limited, so these are related ordering-code candidates rather than broad cross-brand substitutes.
Is R5F104GEANA#20 the same as R5F104GEANA#U0?
The R5F104GEANA#U0 and R5F104GEANA#20 are closely related Renesas RL78/G14 48-HWQFN microcontrollers, but the suffix identifies a different ordering condition. The R5F104GEANA#U0 listing identifies the same 16-bit, 32 MHz, 64 KB architecture and package family. Before treating it as a drop-in replacement, confirm the temperature condition, packaging or quality designation, exposed-pad construction, and any ordering-code-specific restrictions in the manufacturer datasheet.
When should I choose R5F104GEANA#20 over R5F104GEANA#U0?
Choose R5F104GEANA#20 when the specified commercial ordering condition is the correct configuration for the product qualification and supply plan. Choose R5F104GEANA#U0 only after its ordering-code attributes and manufacturing conditions are confirmed as acceptable. Both are identified as RL78/G14, 32 MHz, 64 KB devices in 48-HWQFN packages, so core performance and footprint are the primary similarities; ordering qualification and exact package documentation determine the final choice.
Is R5F104GEANA#20 suitable for a low-power battery-powered design?
Yes, the R5F104GEANA#20 is suitable for low-power designs when its 1.6 V to 5.5 V operating range matches the battery system. Renesas cites platform consumption of 66 µA/MHz during operation and 0.60 µA when only the RTC and low-voltage detector are active. Actual product-level energy use also depends on duty cycle, peripherals, regulator efficiency, and the selected external components, so measure the complete operating profile.
What is the best Renesas equivalent for R5F104GEANA#20?
R5F104GEANA#U0 is the closest indexed Renesas candidate because it is identified with the same RL78/G14 series, 32 MHz frequency, 64 KB flash, and 48-HWQFN package. R5F104GEANA#V0 and R5F104GEANA#40 are additional related ordering codes. Treat each as a conditional drop-in candidate until the exact exposed-pad construction, temperature grade, quality standard, and terminal assignment have been checked against the manufacturer documentation.
How does R5F104GEANA#20 compare with R5F104GEGNA#W0?
The R5F104GEGNA#W0 is presented as a related 48-HWQFN RL78/G14 cross-reference candidate, but the indexed comparison does not provide a complete quantitative feature difference. Both are 32 MHz-class RL78/G14 devices, while exact flash, RAM, peripheral, temperature, and ordering-code attributes must be compared before substitution. The package identity alone does not prove that the exposed pad, pin functions, or clock configuration are interchangeable.
Where can I buy R5F104GEANA#20 online?
Use the Request a Quote form on this page to request R5F104GEANA#20 pricing, stock confirmation, and lead time from XAIPART. The current commercial terms should be confirmed for the exact 48-HWQFN ordering code rather than relying on family-level availability. This avoids substituting another RL78/G14 suffix whose temperature, quality, or packaging condition differs from the target.
What is the price of R5F104GEANA#20?
Current pricing for R5F104GEANA#20 should be obtained through the Request a Quote form on this page because prices and availability can change with order quantity and market conditions. The quote request should identify the exact R5F104GEANA#20 ordering code, required quantity, and delivery destination. No representative price should be substituted from another RL78/G14 package or ordering variant.
What is the lead time and stock status of R5F104GEANA#20?
Request current stock, minimum order quantity, lead time, and scheduled delivery through the Request a Quote form on this page. The manufacturer product page identifies R5F104GEANA#20 for motor-control, industrial, and metering applications, while distributor search results indicate the part is actively offered. Distributor landing pages do not by themselves guarantee the quantity available for a specific production order or the delivery schedule for an assembled system.
What tools and design checks are needed for an R5F104GEANA#20 PCB?
Start with the Renesas 48-HWQFN package drawing and pin-description table, then verify the land pattern, exposed pad, pin 1 orientation, power pins, and debug connections in the PCB library. Add the decoupling network specified by the datasheet and connect the exposed pad to a ground plane with adequate thermal capacity. The complete pin assignment and tool-specific footprint file should be checked against the current manufacturer documentation before fabrication.

Mühendislik referans verileri: R5F104GEANA#20 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the R5F104GEANA#20 when the design needs a 32 MHz, 16-bit RL78/G14 controller with 64 KB flash, integrated ADC, UART, and SPI, and a documented 1.6 V to 5.5 V supply range. R5F104GEANA#U0 is the closest indexed alternative because its listed RL78/G14, 32 MHz, 64 KB, and 48-HWQFN characteristics align with the target. Consider R5F104GEANA#V0 or R5F104GEANA#40 only after their ordering conditions, qualification requirements, and device-specific data have been checked. R5F104GEGNA#W0 is another same-family comparison candidate, but its memory configuration, pin functions, and exposed-pad details require direct verification. For every candidate, confirm the 48-terminal assignment, exposed-pad geometry, operating temperature, clock setup, firmware compatibility, and lifecycle intent before releasing a PCB substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün R5F104GEANA#U0 R5F104GEANA#V0 R5F104GEANA#40 R5F104GEGNA#W0
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Series RL78/G14 RL78/G14 RL78/G14 RL78/G14 RL78/G14
Ordering Condition R5F104GEANA#20 R5F104GEANA#U0 R5F104GEANA#V0 R5F104GEANA#40 R5F104GEGNA#W0

Ana Farklılayıcılar

  • Exact 32 MHz RL78/G14 configuration (karşılaştırma:R5F104GEGNA#W0)
  • Directly indexed same-package ordering candidate (karşılaştırma:R5F104GEANA#U0)
  • Low-voltage operation supports compact embedded systems (karşılaştırma:R5F104GEANA#V0)
  • Integrated control and communications reduce external circuitry (karşılaştırma:R5F104GEANA#40)

Tasarım Notları

The 48-HWQFN package requires attention to its exposed thermal pad. Follow the Renesas package drawing for pad dimensions, solder-mask clearance, and paste stencil. Join the exposed pad to a low-impedance ground plane rather than leaving it isolated. Estimated thermal performance depends on the PCB copper area, airflow, and neighboring heat sources, so calculate the junction-temperature rise from the actual board layout instead of relying only on the package outline.

Place all required decoupling capacitors close to the corresponding device supply terminals, with the shortest practical return path through the ground plane. Separate noisy switching nodes and motor-drive returns from ADC inputs and clock signals. Because the package has 48 terminals on a 7 x 7 mm body, use the manufacturer land pattern and confirm pin 1 orientation against the PCB silkscreen before fabrication. Do not create a footprint only from the body dimensions.

Do not substitute another R5F104 ordering code solely because the family name and nominal package match. Confirm the exposed-pad geometry, terminal assignment, temperature condition, quality designation, clock configuration, and firmware assumptions for each suffix. Also check the operating voltage and ensure that the complete supply remains within 1.6 V to 5.5 V during startup, load transitions, and sleep transitions. A footprint-only comparison is insufficient for a production substitution.

Design the power tree around the 1.6 V minimum operating voltage and use the MCU's low-power modes only after accounting for external circuit consumption. The cited 0.60 µA applies to the RTC-and-LVD operating condition, not the entire assembled product. Regulator quiescent current, pull resistors, ADC circuitry, sensors, and communications can dominate system consumption. Measure sleep, acquisition, and active modes on the final board to verify that the energy budget is realistic.

Keep ADC traces short and route them away from switching-regulator, relay, and motor-drive nodes. Provide a quiet ground reference for analog inputs and use the package ground and exposed-pad structure to establish a low-impedance return. If SPI or other high-speed signals leave the device, inspect series termination, clock-source jitter, and return-path continuity. The 32 MHz CPU clock requires a clean power and ground reference to avoid timing or communication errors.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The product listing identifies the target as RoHS compliant. No specific REACH, halogen-free, conflict-minerals, or automotive qualification statement is established for this ordering code.

İlgili Aramalar

R5F104GEANA#20 datasheet R5F104GEANA#20 specifications R5F104GEANA#20 pinout R5F104GEANA#20 datasheet pdf R5F104GEANA#20 equivalent R5F104GEANA#20 replacement R5F104GEANA#20 48-HWQFN footprint R5F104GEANA#20 motor control R5F104GEANA#20 price R5F104GEANA#20 stock Renesas R5F104GEANA#20 R5F104GEANA#20 vs R5F104GEANA#U0 R5F104GEANA#20 application circuit R5F104GEANA#20 RL78 G14 MCU

İlgili Bileşenler ve Terimler

Renesas Electronics R5F104GEANA#20 R5F104GEANA#U0 R5F104GEANA#V0 R5F104GEANA#40 R5F104GEGNA#W0 RL78/G14 microcontroller 16-bit microcontroller embedded controller semiconductor low-power platform ADC UART SPI motor control industrial metering IoT sensor node 48-HWQFN QFN package family surface-mount package code flash DMIPS RTC low-voltage detector RoHS
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle