Renesas Electronics

R5F10PLFKFB#V5 - 16-Bit RL78/F14 MCU, 96KB Flash | Renesas

MPN: R5F10PLFKFB#V5 ✓ Nakahanda
3.3 V / 5 V Vdss 64-pin LQFP Package 96 KB Memory
MOQ: 1 |

R5F10PLFKFB#V5 Ulas

The Renesas Electronics R5F10PLFKFB#V5 is a 16-bit CISC RL78/F14 microcontroller with 96 KB of embedded flash memory, a 3.3 V / 5 V supply range, and a 64-pin LQFP package. Part of the RL78/F14 family, it combines an on-chip CAN module, an on-chip LIN module and BLDC motor control capability with the family's industry-low standby current consumption.

A microcontroller is a programmable system-on-chip that integrates a CPU core, non-volatile program memory, data memory, timers, serial peripherals and analog blocks on a single die. The Renesas RL78 series is positioned as a low-power, code-efficient 16-bit architecture for cost-sensitive embedded control. The RL78/F14 group sits at the upper level of the RL78 family, spanning 30-pin to 100-pin devices with 48 KB to 256 KB of flash, and extends the base RL78 feature set with communications and motor-control peripherals.

Headline features of the R5F10PLFKFB#V5 include 96 KB of on-chip flash for application code, integrated CAN and LIN interfaces for in-vehicle or distributed serial networking, dedicated BLDC motor control support using Timer RD and comparator resources, and functional safety features that assist system-level diagnostics. The wide 3.3 V / 5 V operating supply range allows the same device to sit between a 3.3 V sensor domain and a 5 V actuator domain without level translation.

Internally, the device is built around the RL78 16-bit CISC core, which uses a compact instruction set that reduces code density requirements relative to generic 8-bit controllers. That efficiency, combined with the family's low current consumption in sleep and stop modes, makes the part attractive for systems that spend most of their lifetime in a low-power state and only wake periodically to acquire data or drive an actuator. The 64-pin LQFP footprint exposes the full set of general-purpose I/O, timer channels, serial functions and analog inputs required for multi-channel control boards.

Typical deployments include automotive body control units, CAN-to-LIN gateway modules, electric pump and fan controllers, battery-powered sensing nodes, and compact appliance control boards. Because the CAN and LIN modules are on-die, a single R5F10PLFKFB#V5 can terminate a mixed vehicle network segment without external transceivers or a companion communication IC.

When laying out the board, treat the 64-pin LQFP as a fine-pitch land pattern with dedicated ground pins distributed around the perimeter; route the CAN and LIN lines as controlled-impedance, short traces terminated per the bus topology, and keep switching or high-current paths away from the analog and timer inputs. Confirm the exact pin assignment and peripheral multiplexing in the manufacturer pin list before finalising the schematic.

Mga alternatibo na pwedeng ilagay na R5F10PLFKFB#V5 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

R5F10PLFKFB#X5

✅ Drop-In
📦 64-pin LQFP
Identical R5F10PLFKFB base die, 96 KB flash, CAN/LIN and 64-pin LQFP footprint; only the ordering suffix differs, which selects a different ambient temperature grade for the assembled device

📋 Alternatibo na Reference (hindi sa katalogo)

R5F10PLJKFB

✅ Drop-In
📦 64-pin LQFP
Same RL78/F14 family, 3.3 V / 5 V supply and 64-pin LQFP footprint with the same integrated CAN, LIN and Timer RD resources, but a smaller program memory budget than the 96 KB of the R5F10PLFKFB#V5

📋 Alternatibo na Reference (hindi sa katalogo)

R5F10PLJLFB#V5

✅ Drop-In
📦 64-pin LQFP
Same RL78/F14 64-pin LQFP pinout with integrated CAN and LIN modules and the same 3.3 V / 5 V supply, but a reduced flash size versus the 96 KB of the R5F10PLFKFB#V5

📋 Alternatibo na Reference (hindi sa katalogo)

R5F10PLHLFB#V5

✅ Drop-In
📦 64-pin LQFP
Same RL78/F14 family with integrated CAN, LIN, Timer RD and comparator resources in the same 64-pin LQFP footprint, but the smallest flash and pin count of the listed candidates, so firmware must be refactored to fit

📋 Alternatibo na Reference (hindi sa katalogo)

R5F10PLFKFB#V5 Mga Pinakamataas na Rating at Electrical Characteristics

Device Type 16-bit CISC microcontroller (MCU)
Series / Family RL78/F14
Core Architecture RL78 16-bit CISC
Flash Memory (Program) 96 KB
Supply Voltage na Operasyon 3.3 V / 5 V
Packhaging 64-pin LQFP
Bilang ng Pin 64 pins
Uri ng Pagpapasok Surface mount
Automotive CAN Module Built-in CAN module
Automotive LIN Module Built-in LIN module
BLDC Motor Control Supported (Timer RD + comparator resources)
Advanced Timer Timer RD
Analog Comparator Comparator peripheral included
Functional Safety Features Supported for BLDC motor control systems
Family Flash Memory Range 48 KB to 256 KB across RL78/F14 lineup
Family Pin Count Range 30 pins to 100 pins across RL78/F14 lineup

Gabay sa Pin Configuration ng R5F10PLFKFB#V5 64-pin lqfp

Pin configuration para sa R5F10PLFKFB#V5 (64-pin lqfp package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 64-pin lqfp package para sa R5F10PLFKFB#V5

Wala ng detalyadong pinout data na magagamit para sa R5F10PLFKFB#V5.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

R5F10PLFKFB#V5 ay nararapat para sa 6 aplikasyons: Automotive Body Control Module, CAN to LIN Gateway Module, BLDC Motor Control for Pumps and Fans, Industrial Sensor Node with Serial Bus, Battery-Powered Metering and Environmental Sensing, Appliance and Household Equipment Control.

🚗

Automotive Body Control Module

The R5F10PLFKFB#V5 suits body control modules where a central node aggregates door, lighting and wiper signals while talking to other ECUs. Its integrated CAN module handles the vehicle backbone without an external controller, and the integrated LIN module drives sub-buses for switches and actuators, cutting two peripheral bridges from the design. The 3.3 V / 5 V operating range lets one device supervise 3.3 V sensor inputs and 5 V driver outputs on the same board, and 96 KB of flash leaves room for diagnostic routines, gateway filtering and future firmware growth. The 64-pin LQFP exposes the I/O and timer channels needed for door lock and wiper pulse timing.

🌐

CAN to LIN Gateway Module

A CAN to LIN gateway is a direct match for the R5F10PLFKFB#V5 because both protocol controllers are on-die, so a single 64-pin LQFP device replaces a CAN controller, a LIN controller, their transceivers' companion logic and the bridging microcontroller typically used. The 16-bit CISC core handles message routing, ID mapping and periodic frame translation with a code density that keeps the firmware inside 96 KB of flash, while the comparator and timer resources support periodic wake-up of the LIN sub-network. The low consumption current of the RL78 family helps when the gateway is powered from a vehicle or 24 V industrial rail through a local regulator.

⚡

BLDC Motor Control for Pumps and Fans

The R5F10PLFKFB#V5 can drive a brushless DC motor directly using its Timer RD channels and comparator inputs for sensorless position detection, together with the functional safety features of the RL78/F14 family. This removes the external commutation logic and gate sequencing typically added around a generic MCU in compact pump, fan and e-bike drive-assist designs. The 3.3 V / 5 V supply flexibility lets the motor rail and the logic rail be regulated independently, and 96 KB of flash accommodates current control loops, fault handling and field update routines. The 64-pin LQFP provides the timer outputs, comparator inputs and digital I/O required for a multi-phase driver interface.

🏭

Industrial Sensor Node with Serial Bus

Low-power industrial sensor nodes benefit from the RL78 family's low consumption current, and the R5F10PLFKFB#V5 adds the CAN module needed to join a plant network without an external interface IC. The 16-bit core with 96 KB of flash can run a stack driver, calibration storage and local filtering alongside the measurement task, while Timer RD channels handle precise sampling intervals and the comparator provides fast threshold events. The 3.3 V / 5 V range suits retrofit boards that inherit either an existing sensor rail or a legacy 5 V loop supply, and the 64-pin LQFP leaves spare I/O for additional transducers.

🧩

Battery-Powered Metering and Environmental Sensing

For battery metering and environmental sensing terminals, the R5F10PLFKFB#V5 pairs wide code density with the family's low standby current, so a measurement cycle can run, report and then return to a low-power state without exhausting the cell. The integrated CAN or LIN interface removes the need for a radio co-processor in wired metering installations, and the 96 KB of flash holds a data logger, calibration tables and a bootloader. The comparator and timer resources support wake-up thresholds and periodic reporting cycles, while the 3.3 V / 5 V supply range permits direct operation from either a coin-cell regulator output or a 5 V bus.

🔧

Appliance and Household Equipment Control

Appliance control boards need a microcontroller with enough general-purpose I/O for relays, valves and displays, and the R5F10PLFKFB#V5 delivers that in a 64-pin LQFP with a small external component count. The 16-bit CISC core keeps the code compact enough for 96 KB of flash while running a state machine, keypad scan and motor or valve sequencer, and Timer RD channels provide the timing needed for agitator or compressor sequences. The LIN module lets the board talk to simple peripheral modules, and the 3.3 V / 5 V supply tolerance simplifies interfacing to a mixed control and drive section of a main board.

Buod ng mga Inirekomendang Produkto

R5F10PLJLFB#V5 Same-family 64-pin LQFP device for smaller firmware budgets Ginagamit sa: Automotive Body Control Module, Industrial Sensor Node with Serial Bus STM32G071C8T6TR STMicroelectronics Ginagamit sa: Automotive Body Control Module R5F10PLFKFB#X5 Same base device with alternate temperature grade suffix Ginagamit sa: CAN to LIN Gateway Module R5F10PLHLFB#V5 Lower flash option for simple protocol translation Ginagamit sa: CAN to LIN Gateway Module, Battery-Powered Metering and Environmental Sensing R5F10PLJKFB Same-family variant with Timer RD BLDC control support Ginagamit sa: BLDC Motor Control for Pumps and Fans, Appliance and Household Equipment Control R5F10PPJLFB#V5 Higher-memory RL78/F14 option for complex control algorithms Ginagamit sa: BLDC Motor Control for Pumps and Fans ATSAM4S16BA-MUR Microchip Technology Ginagamit sa: Industrial Sensor Node with Serial Bus EFM32TG110F4-B-QFN24R Low-power 32-bit alternative for compact nodes Ginagamit sa: Battery-Powered Metering and Environmental Sensing STM32G030K6T6TR STMicroelectronics Ginagamit sa: Appliance and Household Equipment Control
What is the R5F10PLFKFB#V5?
The R5F10PLFKFB#V5 is a 16-bit CISC microcontroller from the Renesas Electronics RL78/F14 family, with 96 KB of embedded flash memory, a 3.3 V / 5 V operating supply and a 64-pin LQFP package. It integrates a CAN module, a LIN module, Timer RD and comparator resources, and supports BLDC motor control. The manufacturer positions RL78/F14 as the upper-level RL78 product, available in 30-pin to 100-pin versions with 48 KB to 256 KB of flash, and built for low current consumption.
How much flash memory does the R5F10PLFKFB#V5 have?
The R5F10PLFKFB#V5 carries 96 KB of on-chip flash for program storage. Across the RL78/F14 family the flash lineup spans 48 KB to 256 KB in devices from 30 to 100 pins, and the RL78 16-bit CISC core is designed for high code density so 96 KB is a practical working budget for protocol stacks plus application logic. The R5F10PPJLFB#V5 variant in the same family carries 256 KB of flash for designs that need substantially more code space.
What package does the R5F10PLFKFB#V5 use?
The R5F10PLFKFB#V5 is supplied in a 64-pin LQFP package. The datasheets.com technical listing describes it as a 16-bit RL78 CISC MCU with 96 KB flash, 3.3 V / 5 V operation and a 64-pin LQFP, which confirms the footprint used by this ordering code. When building a board, use the 64-pin LQFP land pattern and confirm pin functions and peripheral multiplexing against the manufacturer pin description table before routing.
Where can I download the R5F10PLFKFB#V5 datasheet PDF?
The manufacturer product page for this RL78/F14 device is the authoritative source, at renesas.com under the RL78/F14 part details entry for R5F10PLFKFB, where the datasheet PDF, peripheral manual and application notes are published. The same device data is aggregated on the digikey.com product page and mirrored on datasheets.com and Octopart, which link to the Renesas datasheet PDF. Use the Renesas document for pin assignments, electrical characteristics and timing, since distributor copies are only re-hostings of it.
What is the operating voltage of the R5F10PLFKFB#V5?
The R5F10PLFKFB#V5 operates from a 3.3 V or 5 V supply. This dual-rail capability is useful in mixed-domain designs: the same controller can supervise 3.3 V sensors and 5 V actuators, which simplifies the power tree in vehicle body electronics and industrial control boards. The device also belongs to a family that realises the industry's lowest level of consumption current, so supply design should include a regulator sized for the low average load.
Does the R5F10PLFKFB#V5 support CAN and LIN communication?
Yes. The R5F10PLFKFB#V5 includes a built-in CAN module and a built-in LIN module for automotive interfaces, as stated in the Renesas RL78/F14 product description. That means one microcontroller can terminate both a CAN segment and a LIN sub-network without external communication controllers, leaving only the physical-layer transceivers to be added. The built-in CAN and LIN modules are the main reasons this family is selected for vehicle body and gateway electronics.
Is the R5F10PLFKFB#V5 suitable for BLDC motor control?
The R5F10PLFKFB#V5 supports BLDC motor control using the RL78/F14 timer RD and comparator resources, together with the family's functional safety features. Those peripherals allow position sensing for sensorless commutation, commutation timing and fault detection to be handled inside the MCU rather than in external logic. For pumps, fans, e-bike drive assists and small actuators, this reduces the bill of materials compared with a generic MCU plus dedicated gate-driver logic.
R5F10PLFKFB#V5 vs R5F10PLJLFB#V5 - which is better for a CAN to LIN gateway?
For a CAN to LIN gateway, the R5F10PLFKFB#V5 is the stronger choice because it carries 96 KB of flash against the smaller code budget of the R5F10PLJLFB#V5, and both parts share the same RL78/F14 feature set with integrated CAN and LIN modules. The extra flash matters when the gateway also runs diagnostics, logging and firmware update routines. If the gateway only bridges two buses with minimal protocol logic, the R5F10PLJLFB#V5 is adequate and leaves flash headroom unused otherwise.
What is the difference between R5F10PLFKFB#V5 and R5F10PLFKFB#X5?
The two order codes share the same R5F10PLFKFB base device, so the die, 96 KB flash, 3.3 V / 5 V supply, 64-pin LQFP package and integrated CAN and LIN modules are identical. The difference lies in the ordering suffix, which selects the ambient temperature grade of the device, with #V5 and #X5 denoting different qualification ranges in Renesas naming conventions. Choose the suffix matching the temperature extremes of your enclosure and confirm the exact grade boundaries against the manufacturer ordering information before releasing the BOM.
When should I choose the R5F10PLFKFB#V5 over the R5F10PLHLFB#V5?
Choose the R5F10PLFKFB#V5 when your firmware needs the full 96 KB of flash and when you want headroom for future code growth. Choose the R5F10PLHLFB#V5 when the application is small enough to fit its smaller code budget and cost and power budget dominate. Both sit in the RL78/F14 family with integrated CAN, LIN and Timer RD resources, so the decision is normally code size, pin count and thermal envelope rather than peripheral capability.
What is the best drop-in replacement for the R5F10PLFKFB#V5?
The closest drop-in replacement is the R5F10PLFKFB#X5, which uses the identical R5F10PLFKFB base device in the same 64-pin LQFP package with the same 96 KB flash, CAN and LIN integration, differing only in the ordering suffix that selects the temperature grade. If your design does not need the full code budget, the R5F10PLJLFB#V5 and R5F10PLHLFB#V5 in the same 64-pin LQFP footprint are pin-compatible alternatives, though their flash sizes differ. Use the manufacturer cross-reference tool to confirm any substitution.
Where can I buy the R5F10PLFKFB#V5 online?
The R5F10PLFKFB#V5 is stocked and distributed through the major authorised semiconductor distributors, and the manufacturer product page links to authorised distribution partners. On this page, use the Request a Quote form for current stock, volume pricing and lead time for the exact 64-pin LQFP ordering code, since pricing and inventory for this microcontroller change daily. Provide the full suffix #V5 in your request so the correct temperature grade is quoted.
What is the lead time for the R5F10PLFKFB#V5?
Lead time for the R5F10PLFKFB#V5 depends on factory loading and the number of parts you need, and it is quoted per shipment rather than as a fixed figure. Request current lead time and minimum order quantity through the Request a Quote form on this page, quoting the exact ordering code with the #V5 suffix and the 64-pin LQFP package. For multi-year programmes, ask for a scheduled delivery plan so the RL78/F14 supply is reserved against your build schedule.
What can replace the R5F10PLFKFB#V5?
The R5F10PLFKFB#X5 is the most direct replacement, since it is the same R5F10PLFKFB device in the same 64-pin LQFP package with identical flash, supply and communication peripherals. Pin-compatible alternatives in the same RL78/F14 family include the R5F10PLJLFB#V5, the R5F10PLHLFB#V5 and the R5F10PLJKFB, each with a smaller code budget. Because flash size drives firmware limits, confirm that your application fits the alternative's memory before substituting it.
Is the R5F10PLFKFB#V5 the same as the R5F10PLFKFB#X5?
They are the same base device with a different ordering suffix. The R5F10PLFKFB#V5 and the R5F10PLFKFB#X5 share the 16-bit RL78/F14 core, 96 KB flash, 3.3 V / 5 V supply, integrated CAN and LIN modules and the 64-pin LQFP package. The suffix selects the temperature grade for the assembled device, so substitution is only valid when the ambient and enclosure temperature range of the target product falls inside the grade carried by the suffix you are replacing.
What are the key specifications of the R5F10PLFKFB#V5 that engineers should know?
The key specifications of the R5F10PLFKFB#V5 are: 16-bit CISC RL78/F14 core, 96 KB of embedded flash, 3.3 V / 5 V operating supply, 64-pin LQFP package, integrated CAN module, integrated LIN module, Timer RD advanced timer, comparator peripheral and BLDC motor control support with functional safety features. The family itself spans 30 to 100 pins and 48 KB to 256 KB of flash, and is built around the RL78 series low current consumption design. Confirm RAM size, maximum clock frequency and A/D resolution in the manufacturer datasheet.
Is the R5F10PLFKFB#V5 in stock and active?
The R5F10PLFKFB#V5 is listed as an active Renesas RL78/F14 microcontroller, and the manufacturer publishes a part details page for the R5F10PLFKFB base device with datasheet and design support material. Live inventory and factory lead time are confirmed through the Request a Quote form on this page, which reflects current supplier position for the exact ordering code. Because the #V5 suffix selects the temperature grade, always quote that suffix when checking availability.
What is the difference between a RL78/F14 and a generic 8-bit microcontroller?
An RL78/F14 such as the R5F10PLFKFB#V5 uses a 16-bit CISC core with a compact instruction set that achieves higher code density than generic 8-bit controllers, while adding on-chip CAN and LIN interfaces, Timer RD and comparator resources for motor control. A generic 8-bit part of comparable cost typically lacks the serial network controllers and would need external bridges. The trade-off is higher per-pin complexity and a larger 64-pin LQFP footprint than the smallest 8-bit packages.

Impormasyon ng Talumpati sa Engineering for R5F10PLFKFB#V5 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the R5F10PLFKFB#V5 when the design needs both on-die CAN and LIN, the full 96 KB of program memory and a 64-pin LQFP footprint with a 3.3 V / 5 V supply, typically in automotive body electronics, CAN-to-LIN gateways and BLDC pump or fan controllers. Choose the R5F10PLFKFB#X5 when the mechanical design is unchanged but the ambient temperature grade must differ; the die and pinout are identical, so no PCB change is needed. Choose the R5F10PLJLFB#V5 or the R5F10PLHLFB#V5 when the firmware comfortably fits a smaller flash budget and you want to reduce cost and board area while keeping the same RL78/F14 peripherals and footprint. The trade-off is code headroom: any growth in diagnostics, connectivity stacks or motor control algorithms requires rechecking the linker map. Because every candidate listed here is a Renesas RL78/F14 part in the same 64-pin LQFP family, firmware, toolchain and qualification effort are shared across the options.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto R5F10PLFKFB#X5 R5F10PLJKFB R5F10PLJLFB#V5 R5F10PLHLFB#V5
Package 64-pin LQFP 64-pin LQFP - same 64-pin LQFP - same 64-pin LQFP - same 64-pin LQFP - same
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Core Architecture 16-bit CISC RL78 16-bit CISC RL78 16-bit CISC RL78 16-bit CISC RL78 16-bit CISC RL78
Series / Family RL78/F14 RL78/F14 RL78/F14 RL78/F14 RL78/F14
Operating Supply Voltage 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V 3.3 V / 5 V
Integrated CAN Module Yes Yes Yes Yes Yes
Integrated LIN Module Yes Yes Yes Yes Yes
BLDC Motor Control Support Yes (Timer RD and comparator resources) Yes Yes Yes Yes

Pangunahing mga Pagkakaiba

  • Largest code budget among the listed 64-pin LQFP RL78/F14 candidates (kumpara saR5F10PLJLFB#V5)
  • Two on-die serial network controllers in a single MCU (kumpara saR5F10PLHLFB#V5)
  • Drop-in same-die alternative for temperature-grade changes (kumpara saR5F10PLFKFB#X5)

Talaan ng Disenyo

Place the 64-pin LQFP so that the CAN and LIN routes leave the device directly toward the connector or transceiver, keeping those traces short and away from timer outputs and comparator inputs. Both buses are single-ended and sensitive to radiated and conducted noise, so keep the ground return path under the bus pair and avoid routing them beneath switching regulators or motor driver stages. Firmware should enable the CAN and LIN module only after the rails have settled, which prevents a partially powered peripheral from driving a floating bus during start-up.

The R5F10PLFKFB#V5 accepts 3.3 V or 5 V, so confirm which rail is present at the power pins before finalising the regulator choice. Because the RL78 family is designed for low consumption current, the regulator budget is dominated by the peak load seen during analog conversion and timer activity rather than by the standby figure, so size the supply for the worst-case active transient and keep a low-impedance reservoir close to the supply pins. Add bulk and high-frequency decoupling at the supply entry to keep switching ripple out of the comparator and timer inputs.

A frequent error is treating the two ordering suffixes as interchangeable when they are not: the base device is the same, but the suffix selects the ambient temperature grade of the assembled part, and using the wrong grade can push the junction outside its rated range in a hot enclosure. The second common mistake is assuming the flash size carries over when moving to a smaller-code sibling such as the R5F10PLJLFB#V5, which will break the link if the firmware exceeds the new budget. Verify both the suffix and the linker map against the manufacturer datasheet before releasing the design to production.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer describes the RL78/F14 as an automotive-interface family with built-in CAN and LIN modules, but no explicit RoHS, REACH, AEC-Q100 or lead-free statement was retrieved for this ordering code. Confirm the compliance and qualification entries in the Renesas product page and the applicable material declaration before releasing the BOM.

Data napatotohanan sa: 2026-11-16 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

R5F10PLFKFB#V5 R5F10PLFKFB datasheet R5F10PLFKFB datasheet pdf R5F10PLFKFB pinout R5F10PLFKFB 64 pin LQFP footprint Renesas R5F10PLFKFB R5F10PLFKFB vs R5F10PLJLFB#V5 R5F10PLFKFB drop-in replacement R5F10PLFKFB equivalent R5F10PLFKFB price R5F10PLFKFB stock R5F10PLFKFB CAN LIN microcontroller R5F10PLFKFB BLDC motor control RL78/F14 96KB flash 3.3V 5V MCU R5F10PLFKFB schematic

Mga kaugnay na Mga Komponente at mga Tuntunin

Renesas Electronics R5F10PLFKFB#V5 R5F10PLFKFB R5F10PLFKFB#X5 R5F10PLJKFB R5F10PLJLFB#V5 R5F10PLHLFB#V5 R5F10PPJLFB#V5 RL78/F14 RL78 microcontroller MCU 16-bit CISC core embedded flash memory 96 KB flash LQFP-64 LQFP surface mount SMD CAN module LIN module Timer RD comparator BLDC motor control functional safety 3.3 V 5 V low current consumption automotive body control CAN to LIN gateway
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ