Skyworks Solutions

SI3018-F-FT - Programmable Voice DAA | Skyworks Solutions

MPN: SI3018-F-FT ✓ Nakahanda
16-pin TSSOP Package
MOQ: 1 |

SI3018-F-FT Ulas

Skyworks Solutions Inc. SI3018-F-FT is a programmable direct access arrangement (DAA) integrated circuit for foreign exchange office analog line interfaces. It is associated with the Si3050 voice DAA chipset, uses V.92 data formatting, and is available in a 16-pin TSSOP package measuring approximately 0.173 inches by 4.40 mm in the listed package dimensions. The SI3018-F-FT is packaged in a tube and is identified as a lead-free, RoHS-compliant component.

A direct access arrangement is a telephone subscriber-line interface that connects a voice codec or digital signal processor to an analog telephone line. Within the Si3050 chipset architecture, the SI3018-F-FT handles the line-side foreign exchange office functions while the companion Si3050 provides the central DAA functions. This separation allows a system architect to divide interface processing across dedicated devices and supports programmable voice-access designs.

The SI3018-F-FT's principal documented functions include a programmable voice DAA interface, V.92 data formatting, an SPI control interface, and GCI support. It also participates in PCM highway and A-law companding data paths. These features place the device in line-side voice gateway, foreign exchange office, digital private exchange, and telephony interface equipment rather than general-purpose signal-processing applications.

Programmability allows the associated voice interface to be configured through its control interface instead of relying only on fixed analog switching. In a complete design, the SI3018-F-FT is used alongside the Si3050 and an appropriate voice codec or digital signal processor. The manufacturer documentation also identifies the Si3010 and Si3019 line-side devices as compatible members of the Si3056 measurement ecosystem, illustrating the modular structure of the voice DAA product family.

Typical implementations include voice over packet gateways, legacy telephone line adapters, central-office line cards, digital loopback equipment, and multichannel voice interface systems. System-level compatibility depends on the selected companion devices, the firmware configuration, country-specific line parameters, and compliance with the applicable network requirements.

PCB design should preserve the pin assignments and layout guidance in the manufacturer datasheet. A 16-pin TSSOP footprint requires adequate pin escapes, a stable analog supply, careful grounding around line-interface circuitry, and protection appropriate to the external telephone line. The SI3018-F-FT is a line-side interface IC, so its own operating limits and the surrounding protection network must both be considered.

This product summary consolidates the documented package, data-format, control-interface, packaging, and compliance characteristics with practical implementation guidance. It also identifies the closest confirmed package-matched ordering alternative while separating genuine pin-compatible choices from related devices that use different packages.

Mga alternatibo na pwedeng ilagay na SI3018-F-FT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok SI3018-F-FT (parehas na form factor at footprint) — pagkakaiba sa Pin Count, Product Type.

Silicon Labs
Pin Count: 36 pins
Product Type: Integrated eFuse
Ikabit sa SI3018-F-FT →

SI3018-FT

✅ Drop-In
Silicon Labs
📦 16-TSSOP
Integrated eFuse · 18 V · 12 A · 3 mOhm · IMON · PG · -40 C to +85 C · 36-VQFN

Magkontak para sa presyo

Tingnan ang Datasheet →

SI3018-F-FT Mga Spesipikasyon

Product Type Programmable direct access arrangement (DAA) interface IC
Fungsi Foreign exchange office analog line interface
Associated Chipset Si3050 voice DAA chipset
Data Format V.92
Control Interface SPI
Digital Interface GCI
Data Path PCM highway with A-law companding
Package Type 16-pin TSSOP
Package Width 4.40 mm
Package Width (Imperial) 0.173 in
Packaging Tube
Lead-Free Status Lead-free
Tindminan RoHS RoHS compliant
Bilang ng Pin 16 pins
Line-Side Companion Devices Si3010 and Si3019

Gabay sa Pin Configuration ng SI3018-F-FT 0.173 in

Pin configuration para sa SI3018-F-FT (0.173 in package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 0.173 in package para sa SI3018-F-FT

Wala ng detalyadong pinout data na magagamit para sa SI3018-F-FT.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

SI3018-F-FT ay nararapat para sa 6 aplikasyons: Voice Over Packet Gateway, Foreign Exchange Office Line Card, Digital Private Exchange Interface, Legacy Telephone Line Adapter, Multichannel Voice Interface System, Voice Line Test And Measurement.

🌐

Voice Over Packet Gateway

The SI3018-F-FT fits the line-side analog interface of a voice over packet gateway because it provides a programmable foreign exchange office DAA within the Si3050 chipset architecture. Its V.92 data format, PCM highway, A-law companding, SPI control, and GCI connectivity support the path between a telephone line and the gateway’s voice-processing electronics. The part is placed beside line protection and the codec or DSP rather than performing media processing itself. This division keeps analog line handling separate from packet conversion. The measurable benefit is architectural flexibility: line behavior can be configured through the documented control interface, while the associated Si3050 supports chipset-level voice DAA operation. Final line parameters still require country-specific configuration and qualification against the target network.

📞

Foreign Exchange Office Line Card

The SI3018-F-FT is suited to a foreign exchange office line card because it is explicitly described as a programmable FXO analog interface in the Si3050 voice DAA chipset. A line card can use its V.92 formatting and PCM highway connection to transfer voice data toward the central voice-processing section while an SPI interface configures device behavior. The 16-pin TSSOP package provides a compact surface-mount implementation without replacing the required external telephone-line protection. Compared with a purely fixed analog interface, the programmable architecture allows country and line parameters to be handled as part of product configuration. The design must still include correct line-voltage protection, grounding, and signaling support appropriate to the deployed network.

🏢

Digital Private Exchange Interface

The SI3018-F-FT can serve as the subscriber-line interface element of a digital private exchange because it provides a programmable FXO DAA and a documented digital path to the Si3050 chipset. The V.92 data format and PCM highway with A-law companding align with telephony-oriented voice transports, while GCI and SPI support device communication and configuration. In implementation, the IC works with a voice codec or DSP and protected telephone-line circuitry rather than directly terminating a modern IP endpoint. Its contribution is a configurable analog-to-digital interface boundary, allowing common hardware platforms to support different line-country requirements through configuration. Qualification should verify timing, line-state behavior, power requirements, and network-specific signaling beyond the basic V.92 format.

☎️

Legacy Telephone Line Adapter

The SI3018-F-FT is appropriate for a legacy telephone line adapter that must bridge analog subscriber lines with modern digital voice processing. Its programmable foreign exchange office interface handles the line-side role, while the Si3050 chipset provides the associated voice DAA functions. V.92 formatting, A-law companding, the PCM highway, and GCI connectivity make the signal path suitable for telephony equipment operating with a voice codec or DSP. The implementation should use the manufacturer’s reference configuration and preserve the documented pin assignments. A key engineering trade-off is that the IC handles interface functions rather than media compression alone, so adequate line protection and application-specific signaling remain necessary. This makes it useful for installed equipment, carrier adapters, and industrial voice terminals.

🖥️

Multichannel Voice Interface System

The SI3018-F-FT can be used in a multichannel voice interface system where each line requires a dedicated programmable FXO interface. The Si3050’s central DAA role and the SI3018’s line-side role permit a partitioned architecture in which the digital voice path uses GCI and PCM highway resources while SPI supplies configuration access. V.92 formatting and A-law companding provide the documented basis for inter-device voice transfer. In a multichannel card, designers should pay particular attention to routing, grounding, power distribution, and the maximum channel count supported by the rest of the system. The SI3018-F-FT does not remove the need for independent line protection, surge control, or codec resources. Its advantage is a configurable, repeatable line-side building block with a compact 16-pin TSSOP footprint.

🔧

Voice Line Test And Measurement

The SI3018-F-FT can participate in voice-line test equipment that requires a programmable FXO interface rather than a passive simulation circuit. The manufacturer documentation identifies the Si3050 as compatible with the Si3010, Si3018, and Si3019 line-side devices in a measurement ecosystem, demonstrating how these devices are combined for line-current and line-voltage analysis. The SI3018-F-FT therefore fits an interface path where V.92 data, PCM highway signaling, and GCI connectivity interact with the central measurement device. System design must include the proper line interface, protection, and instrumentation connections. The benefit is that a production-quality programmable DAA can provide repeatable line-side behavior for test fixtures, while a DSP or codec supplies the specific measurement and voice-processing functions required by the test product.

Buod ng mga Inirekomendang Produkto

Si3050 Associated voice DAA chipset device Ginagamit sa: Voice Over Packet Gateway, Foreign Exchange Office Line Card, Digital Private Exchange Interface, Legacy Telephone Line Adapter, Multichannel Voice Interface System Si3019 Related line-side voice interface Ginagamit sa: Voice Over Packet Gateway, Legacy Telephone Line Adapter Si3018 Related programmable voice DAA family Ginagamit sa: Foreign Exchange Office Line Card, Multichannel Voice Interface System Si3010 Related line-side measurement-capable device Ginagamit sa: Digital Private Exchange Interface, Voice Line Test And Measurement Si3056 Companion measurement chipset documented with Si3018 Ginagamit sa: Voice Line Test And Measurement
What is the SI3018-F-FT used for?
The SI3018-F-FT is a programmable foreign exchange office analog line interface used with the Si3050 voice DAA chipset. According to the manufacturer datasheet, the device supports a PCM highway, A-law companding, an SPI control interface, and GCI connectivity. It is intended for telephone line gateways, line cards, and other voice interfaces rather than general-purpose signal processing.
Where can I download the SI3018-F-FT datasheet PDF?
The SI3018-F-FT documentation is available through the manufacturer data-sheet link on this page, which opens the Si3056 Si3018/19/10 PDF. The listing identifies the SI3018-F-FT as a 16-pin TSSOP direct access arrangement. Use the pin-description and application sections in that document when assigning PCB tracks and reviewing companion Si3050 circuitry.
What package and pin count does SI3018-F-FT use?
The SI3018-F-FT uses a 16-pin TSSOP package. The listed package dimensions include a width of approximately 4.40 mm, or 0.173 inches, and the catalog packaging configuration is a tube. According to the manufacturer and catalog documentation, the package is lead-free and RoHS compliant.
Is the SI3018-F-FT compatible with the Si3050 DAA chipset?
Yes, the SI3018-F-FT is a line-side device intended to work with the Si3050 voice DAA chipset. The manufacturer describes the combined solution as a highly programmable, globally compliant foreign exchange office analog interface. System design must still configure the devices correctly and include the required codec, DSP, line protection, and country-specific network functions.
What is the difference between SI3018-F-FT and SI3018-FT?
SI3018-F-FT and SI3018-FT are both listed as 16-pin TSSOP direct access arrangement devices from the same manufacturer. The catalog information does not state an electrical difference between them; their documented ordering codes differ. Treat SI3018-FT as the closest confirmed package-matched alternative and verify current ordering, lifecycle, and configuration details before substitution.
Can SI3018-F-FT replace a Si3050 chipset device?
The SI3018-F-FT cannot automatically replace a Si3050 because the Si3050 is the associated chipset device while the SI3018-F-FT is the line-side foreign exchange office interface. The Si3056 family documentation also identifies Si3010, Si3018, and Si3019 as line-side devices. Replacement decisions must therefore preserve the intended functional partition, package, and pin assignments.
What is the best drop-in replacement for SI3018-F-FT?
SI3018-FT is the closest confirmed drop-in candidate because both parts are listed in the same 16-pin TSSOP package. No published electrical difference appears in the product summaries. A broader substitution should not be assumed from family similarity alone, so verify pin functions, firmware compatibility, line parameters, supply requirements, and production status before releasing a replacement.
When should I choose SI3018-F-FT over SI3018-FT?
Choose SI3018-F-FT when it is the exact ordering code specified by the system bill of materials or when its tube-packaging configuration is required. Choose SI3018-FT when the supply chain needs an alternative published in the same 16-pin TSSOP package. Because no confirmed functional difference is stated, firmware and end-product qualification should determine the final selection.
Is SI3018-F-FT suitable for a voice over packet gateway?
The SI3018-F-FT is suitable for the line-interface portion of a voice over packet gateway because it provides a programmable foreign exchange office DAA and connects to the Si3050 chipset through the documented digital interface. The gateway still needs a voice codec or DSP, suitable line protection, and a signaling configuration that meets the target network’s requirements.
What controls the SI3018-F-FT voice DAA?
The SI3018-F-FT is configured through its documented SPI control interface, with GCI support for the associated digital connection to the voice DAA chipset. The manufacturer documentation identifies the Si3050 as the companion chipset device. Register settings and line behavior should be programmed according to the manufacturer’s configuration procedure rather than inferred from generic telecom interfaces.
What data format does SI3018-F-FT support?
The SI3018-F-FT supports V.92 data formatting and is associated with a PCM highway using A-law companding. These functions place it in class voice line-side equipment and explain its use with the Si3050 chipset. A complete product must still configure signaling, country-specific line parameters, and the codec or DSP data path correctly.
Where can I buy SI3018-F-FT and what is its lead time?
Use the Request a Quote form on this page to request SI3018-F-FT availability, current commercial terms, and lead time. The product is listed in a tube package, but no confirmed current stock quantity or production schedule is stated. Request the exact MPN SI3018-F-FT so the quotation and supply confirmation are tied to the correct ordering configuration.
What is the price of SI3018-F-FT?
The current commercial price for SI3018-F-FT is obtained through the Request a Quote form on this page. Current pricing can change with quantity, tube packaging, component condition, and supply status. Submit the required quantity and target date with the request to obtain an actionable quotation for the exact SI3018-F-FT ordering code.
Is SI3018-F-FT in stock?
Current SI3018-F-FT stock is confirmed through the Request a Quote form on this page rather than assumed from a catalog entry. The documented packaging configuration is a tube, and the component is identified as lead-free and RoHS compliant. Include your required quantity, date code preference, and target delivery date in the request.
What are the key specifications of SI3018-F-FT that engineers should know?
The SI3018-F-FT is a 16-pin TSSOP programmable voice DAA interface associated with the Si3050 chipset. Its documented characteristics include V.92 data formatting, SPI control, GCI connectivity, PCM highway and A-law companding support, tube packaging, and lead-free RoHS-compliant construction. Exact electrical limits, clocking, pin functions, and timing values must be taken from the manufacturer datasheet.
Are the SI3018-F-FT, Si3010, and Si3019 the same device?
No, the Si3010, Si3018, and Si3019 are related line-side devices rather than identical ordering codes. The Si3056 documentation identifies them as line-side devices used with Si3056 measurement functions, while the SI3018-F-FT is specifically a Si3050 foreign exchange office interface. Select among them according to chipset architecture, pinout, package, and required line functions.

Impormasyon ng Talumpati sa Engineering for SI3018-F-FT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose SI3018-F-FT when the bill of materials, firmware configuration, and line-card architecture specifically call for that ordering code. Its documented role in the Si3050 voice DAA chipset, V.92 data formatting, SPI control, GCI connectivity, and 16-pin TSSOP package make it appropriate for programmable FXO interfaces in gateways, line cards, private exchanges, and telephone-line adapters. SI3018-FT is the closest confirmed alternative because it is also published in a 16-pin TSSOP package, and no electrical difference is stated in the available summaries. Select it only after checking current lifecycle, configuration, and end-product equivalence. Do not substitute the Si3050, Si3010, or Si3019 solely because they share the broader voice DAA family; each has a different chipset or measurement role, and the documented pin functions must be verified before a replacement is approved.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto SI3018-FT
Package 16-TSSOP 16-TSSOP
Brand Skyworks Solutions Inc. Skyworks Solutions Inc.
Product Type Direct Access Arrangement (DAA) Direct Access Arrangement (DAA)
Pin Count 16 pins 16 pins

Pangunahing mga Pagkakaiba

  • Programmable FXO line-side integration (kumpara saSI3018-FT)
  • Documented digital voice connectivity (kumpara saSI3018-FT)
  • Si3050 chipset positioning (kumpara saSI3018-FT)

Talaan ng Disenyo

Use the exact 16-pin TSSOP footprint and follow the manufacturer pin-description table when assigning PCB tracks. Keep the SPI and GCI routing away from line-side transient paths, maintain continuous ground references under the device, and place required bypass components close to their associated pins. Because the SI3018-F-FT interfaces directly with a telephone line, route the protected analog node carefully and avoid sharing long current paths with digital signals.

Treat the GCI and PCM highway connections as controlled digital interfaces even though the IC is used in an analog line circuit. Route these nets away from protected telephone-line traces, maintain short return paths, and observe the manufacturer’s clocking and timing requirements. If the design uses both SPI control and GCI communication, check their activity during initialization so configuration writes and line-interface startup do not create conflicting bus states.

Do not confuse the Si3018 line-side device with the Si3050 central chipset device or assume that related Si3010 and Si3019 devices are interchangeable. Confirm the ordering code, package, pin functions, firmware configuration, and required companion devices before schematic release. A 16-pin TSSOP package does not establish functional equivalence by itself, even when the overall voice DAA family and data formats appear similar.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Yes
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The product listing identifies SI3018-F-FT as lead-free and RoHS compliant. No additional reach, halogen-free, conflict-minerals, or automotive qualification claims are stated.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

si3018 f fsr si3018 datasheet si3018 fs datasheet SI3018-F-FT datasheet SI3018-F-FT pinout SI3018-F-FT equivalent SI3018-F-FT replacement SI3018-F-FT vs SI3018-FT SI3018-F-FT application circuit SI3018-F-FT 16-TSSOP Skyworks Solutions SI3018-F-FT SI3018-F-FT price

Mga kaugnay na Mga Komponente at mga Tuntunin

Skyworks Solutions Inc. SI3018-F-FT SI3018-FT Si3050 Si3010 Si3018 Si3019 Si3056 Direct Access Arrangement DAA foreign exchange office FXO programmable voice interface V.92 SPI GCI PCM highway A-law companding telephone line interface voice codec digital signal processor 16-TSSOP TSSOP family surface-mount package RoHS lead-free
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ