SI3018-F-FT - Programmable Voice DAA | Skyworks Solutions
MPN: SI3018-F-FT ✓ Hoạt độngSI3018-F-FT Tóm tắt
A direct access arrangement is a telephone subscriber-line interface that connects a voice codec or digital signal processor to an analog telephone line. Within the Si3050 chipset architecture, the SI3018-F-FT handles the line-side foreign exchange office functions while the companion Si3050 provides the central DAA functions. This separation allows a system architect to divide interface processing across dedicated devices and supports programmable voice-access designs.
The SI3018-F-FT's principal documented functions include a programmable voice DAA interface, V.92 data formatting, an SPI control interface, and GCI support. It also participates in PCM highway and A-law companding data paths. These features place the device in line-side voice gateway, foreign exchange office, digital private exchange, and telephony interface equipment rather than general-purpose signal-processing applications.
Programmability allows the associated voice interface to be configured through its control interface instead of relying only on fixed analog switching. In a complete design, the SI3018-F-FT is used alongside the Si3050 and an appropriate voice codec or digital signal processor. The manufacturer documentation also identifies the Si3010 and Si3019 line-side devices as compatible members of the Si3056 measurement ecosystem, illustrating the modular structure of the voice DAA product family.
Typical implementations include voice over packet gateways, legacy telephone line adapters, central-office line cards, digital loopback equipment, and multichannel voice interface systems. System-level compatibility depends on the selected companion devices, the firmware configuration, country-specific line parameters, and compliance with the applicable network requirements.
PCB design should preserve the pin assignments and layout guidance in the manufacturer datasheet. A 16-pin TSSOP footprint requires adequate pin escapes, a stable analog supply, careful grounding around line-interface circuitry, and protection appropriate to the external telephone line. The SI3018-F-FT is a line-side interface IC, so its own operating limits and the surrounding protection network must both be considered.
This product summary consolidates the documented package, data-format, control-interface, packaging, and compliance characteristics with practical implementation guidance. It also identifies the closest confirmed package-matched ordering alternative while separating genuine pin-compatible choices from related devices that use different packages.
Bộ thay thế dễ dàng lắp đặt cho SI3018-F-FT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SI3018-F-FT (cùng hình factor và footprint) — khác nhau ở Pin Count, Product Type.
SI3018-FT
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →SI3018-F-FT Thông số kỹ thuật
| Product Type | Programmable direct access arrangement (DAA) interface IC |
| Chức năng | Foreign exchange office analog line interface |
| Associated Chipset | Si3050 voice DAA chipset |
| Data Format | V.92 |
| Control Interface | SPI |
| Digital Interface | GCI |
| Data Path | PCM highway with A-law companding |
| Package Type | 16-pin TSSOP |
| Package Width | 4.40 mm |
| Package Width (Imperial) | 0.173 in |
| Packaging | Tube |
| Lead-Free Status | Lead-free |
| Trạng thái RoHS | RoHS compliant |
| Số chân | 16 pins |
| Line-Side Companion Devices | Si3010 and Si3019 |
Hướng dẫn cấu hình chân SI3018-F-FT 0.173 in
Cấu hình chân cho SI3018-F-FT (0.173 in gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SI3018-F-FT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SI3018-F-FT phù hợp cho 6 Áp dụngs: Voice Over Packet Gateway, Foreign Exchange Office Line Card, Digital Private Exchange Interface, Legacy Telephone Line Adapter, Multichannel Voice Interface System, Voice Line Test And Measurement.
Voice Over Packet Gateway
The SI3018-F-FT fits the line-side analog interface of a voice over packet gateway because it provides a programmable foreign exchange office DAA within the Si3050 chipset architecture. Its V.92 data format, PCM highway, A-law companding, SPI control, and GCI connectivity support the path between a telephone line and the gateway’s voice-processing electronics. The part is placed beside line protection and the codec or DSP rather than performing media processing itself. This division keeps analog line handling separate from packet conversion. The measurable benefit is architectural flexibility: line behavior can be configured through the documented control interface, while the associated Si3050 supports chipset-level voice DAA operation. Final line parameters still require country-specific configuration and qualification against the target network.
Được đề xuất
Foreign Exchange Office Line Card
The SI3018-F-FT is suited to a foreign exchange office line card because it is explicitly described as a programmable FXO analog interface in the Si3050 voice DAA chipset. A line card can use its V.92 formatting and PCM highway connection to transfer voice data toward the central voice-processing section while an SPI interface configures device behavior. The 16-pin TSSOP package provides a compact surface-mount implementation without replacing the required external telephone-line protection. Compared with a purely fixed analog interface, the programmable architecture allows country and line parameters to be handled as part of product configuration. The design must still include correct line-voltage protection, grounding, and signaling support appropriate to the deployed network.
Được đề xuất
Digital Private Exchange Interface
The SI3018-F-FT can serve as the subscriber-line interface element of a digital private exchange because it provides a programmable FXO DAA and a documented digital path to the Si3050 chipset. The V.92 data format and PCM highway with A-law companding align with telephony-oriented voice transports, while GCI and SPI support device communication and configuration. In implementation, the IC works with a voice codec or DSP and protected telephone-line circuitry rather than directly terminating a modern IP endpoint. Its contribution is a configurable analog-to-digital interface boundary, allowing common hardware platforms to support different line-country requirements through configuration. Qualification should verify timing, line-state behavior, power requirements, and network-specific signaling beyond the basic V.92 format.
Được đề xuất
Legacy Telephone Line Adapter
The SI3018-F-FT is appropriate for a legacy telephone line adapter that must bridge analog subscriber lines with modern digital voice processing. Its programmable foreign exchange office interface handles the line-side role, while the Si3050 chipset provides the associated voice DAA functions. V.92 formatting, A-law companding, the PCM highway, and GCI connectivity make the signal path suitable for telephony equipment operating with a voice codec or DSP. The implementation should use the manufacturer’s reference configuration and preserve the documented pin assignments. A key engineering trade-off is that the IC handles interface functions rather than media compression alone, so adequate line protection and application-specific signaling remain necessary. This makes it useful for installed equipment, carrier adapters, and industrial voice terminals.
Được đề xuất
Multichannel Voice Interface System
The SI3018-F-FT can be used in a multichannel voice interface system where each line requires a dedicated programmable FXO interface. The Si3050’s central DAA role and the SI3018’s line-side role permit a partitioned architecture in which the digital voice path uses GCI and PCM highway resources while SPI supplies configuration access. V.92 formatting and A-law companding provide the documented basis for inter-device voice transfer. In a multichannel card, designers should pay particular attention to routing, grounding, power distribution, and the maximum channel count supported by the rest of the system. The SI3018-F-FT does not remove the need for independent line protection, surge control, or codec resources. Its advantage is a configurable, repeatable line-side building block with a compact 16-pin TSSOP footprint.
Được đề xuất
Voice Line Test And Measurement
The SI3018-F-FT can participate in voice-line test equipment that requires a programmable FXO interface rather than a passive simulation circuit. The manufacturer documentation identifies the Si3050 as compatible with the Si3010, Si3018, and Si3019 line-side devices in a measurement ecosystem, demonstrating how these devices are combined for line-current and line-voltage analysis. The SI3018-F-FT therefore fits an interface path where V.92 data, PCM highway signaling, and GCI connectivity interact with the central measurement device. System design must include the proper line interface, protection, and instrumentation connections. The benefit is that a production-quality programmable DAA can provide repeatable line-side behavior for test fixtures, while a DSP or codec supplies the specific measurement and voice-processing functions required by the test product.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SI3018-F-FT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | SI3018-FT |
|---|---|---|
| Package | 16-TSSOP | 16-TSSOP |
| Brand | Skyworks Solutions Inc. | Skyworks Solutions Inc. |
| Product Type | Direct Access Arrangement (DAA) | Direct Access Arrangement (DAA) |
| Pin Count | 16 pins | 16 pins |
Bảo phân biệt quan trọng
- Programmable FXO line-side integration (vsSI3018-FT)
- Documented digital voice connectivity (vsSI3018-FT)
- Si3050 chipset positioning (vsSI3018-FT)
Ghi chú thiết kế
Use the exact 16-pin TSSOP footprint and follow the manufacturer pin-description table when assigning PCB tracks. Keep the SPI and GCI routing away from line-side transient paths, maintain continuous ground references under the device, and place required bypass components close to their associated pins. Because the SI3018-F-FT interfaces directly with a telephone line, route the protected analog node carefully and avoid sharing long current paths with digital signals.
Treat the GCI and PCM highway connections as controlled digital interfaces even though the IC is used in an analog line circuit. Route these nets away from protected telephone-line traces, maintain short return paths, and observe the manufacturer’s clocking and timing requirements. If the design uses both SPI control and GCI communication, check their activity during initialization so configuration writes and line-interface startup do not create conflicting bus states.
Do not confuse the Si3018 line-side device with the Si3050 central chipset device or assume that related Si3010 and Si3019 devices are interchangeable. Confirm the ordering code, package, pin functions, firmware configuration, and required companion devices before schematic release. A 16-pin TSSOP package does not establish functional equivalence by itself, even when the overall voice DAA family and data formats appear similar.
Thông tin tuân thủ
The product listing identifies SI3018-F-FT as lead-free and RoHS compliant. No additional reach, halogen-free, conflict-minerals, or automotive qualification claims are stated.