SI3019-F-GS Global Line-Side DAA | Skyworks Solutions
MPN: SI3019-F-GS ⚠ Huling PagbiliSI3019-F-GS Ulas
A Direct Access Arrangement is a telecommunications interface integrated circuit that provides the physical line-side interface between a voice codec or voice processing channel and a subscriber line. In the broader system hierarchy, a DAA is an interface IC within a programmable voice subsystem. It differs from a basic codec because it addresses line-interface requirements such as line voltage, loop current, and voice-path integration while relying on a companion controller for configuration and supervision.
The SI3019-F-GS operates with the Si3050 family, and the manufacturer documentation identifies features including a PCM highway data interface, SPI control, a GCI interface, and A-law companding. The Si3019 also adds a finer loop-current reporting register through the LCS2 byte, while the Si3050 performs line-voltage measurement when used with the Si3011 or Si3019 line-side device. These functions support compact voice-channel implementations in analog telephone equipment and voice-processing platforms.
This component is particularly relevant to legacy and industrial voice systems that require a dedicated global line-side DAA rather than a general-purpose codec. The 16-pin SOIC package supports conventional surface-mount assembly, while the SPI-based control architecture allows firmware-driven configuration. Designers must observe the line-side power, protection, grounding, and signal-integrity requirements described in the manufacturer’s reference application material.
Typical uses include voice interface cards, analog telephone adapters, central-office line-card equipment, embedded voice gateways, and telecom test equipment. In these systems, the SI3019-F-GS can pair with the Si3050 to implement a controlled PCM voice path while separating line-side interface functions from the host processor.
Design guidance should focus on the exact reference schematic, external protection network, supply sequencing, and decoupling values in the manufacturer datasheet. The product-discontinuation notice also defines a 48-unit minimum buy quantity for SI3019-F-GS orders, so supply planning should account for constrained rather than routine production availability.
This product summary combines package, family, interface, compatibility, and lifecycle information with practical sourcing guidance. It also distinguishes same-footprint alternatives from variants using different packages, helping engineers identify genuine replacement options before committing a voice-interface board to production.
Mga alternatibo na pwedeng ilagay na SI3019-F-GS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok SI3019-F-GS (parehas na form factor at footprint) — pagkakaiba sa Mounting Type, Package, Product Type.
SI3019-F-GSR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SI3019-F-GMR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SI3019-F-GS Mga Spesipikasyon
| Product Type | Global line-side Direct Access Arrangement (DAA) |
| Product Family | Si3050, Si3011, Si3018 and Si3019 programmable voice DAA solutions |
| Packhaging | 16-pin SOIC |
| Bilang ng Pin | 16 pins |
| Uri ng Pagpapasok | Surface mount |
| Control Interface | SPI serial interface |
| Voice Data Interface | PCM highway data interface |
| Processor Interface | GCI interface |
| Companding | A-law companding |
| Loop Current Resolution | 8-bit LCS2 reporting register |
| Line Voltage Measurement | Performed by Si3050 when paired with Si3011 or Si3019 |
| Companion Controller | Si3050 programmable voice interface |
| Minimum Buy Quantity | 48 units |
| Order Restriction | Minimum-buy orders are non-cancelable and non-returnable |
Gabay sa Pin Configuration ng SI3019-F-GS 16-pin soic
Pin configuration para sa SI3019-F-GS (16-pin soic package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SI3019-F-GS.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SI3019-F-GS ay nararapat para sa 6 aplikasyons: Analog Voice Line Cards, Analog Telephone Adapters, Voice Processing Gateways, Central Office Line Equipment, Embedded Voice Test Equipment, Industrial Voice Terminals.
Analog Voice Line Cards
The SI3019-F-GS fits analog voice line cards that separate line-side interface handling from host-side voice processing. Its global DAA architecture, SPI control path, PCM highway data interface, and A-law companding allow the Si3050 controller to manage configuration while voice samples travel through the digital channel. The 16-pin SOIC package also supports conventional surface-mount PCB assembly. For production designs, the line protection network, supply routing, grounding, and decoupling must follow the manufacturer’s reference implementation to preserve voice-path performance.
Inirekomenda
Analog Telephone Adapters
The SI3019-F-GS can support compact analog telephone adapters that require a dedicated global line-side interface. It works with the Si3050 to provide SPI-configurable line functions, A-law voice handling, and PCM highway connectivity. Using a separate line-side DAA allows the controller and interface responsibilities to remain organized, which is useful in products combining legacy telephone connectivity with embedded voice processing. Board implementation should preserve the recommended line protection, isolated or non-isolated supply approach, and analog return-path layout used by the manufacturer.
Inirekomenda
Voice Processing Gateways
The SI3019-F-GS is suitable for voice gateways that bridge a subscriber line with a configurable digital voice pipeline. Its PCM highway interface supports structured voice transport, while SPI control permits firmware-driven configuration through the companion Si3050. A-law companding makes it directly relevant to legacy voice-channel equipment and transcoding subsystems. In such systems, careful separation of analog line routing, digital timing, and power-return connections is essential to prevent codec noise and ringing from coupling into the voice path.
Inirekomenda
Central Office Line Equipment
The SI3019-F-GS can be used in central-office line equipment where each subscriber channel requires a programmable global line-side DAA. The device’s dedicated 16-pin SOIC interface, A-law companding, loop-current reporting, and SPI-managed configuration fit multichannel voice-card designs organized around the Si3050 controller family. Each channel should follow the manufacturer’s line-driver, protection, and reference network requirements. Production procurement should also plan around the product-discontinuation status and the stated minimum buy quantity for the SI3019-F-GS.
Inirekomenda
Embedded Voice Test Equipment
The SI3019-F-GS is relevant to embedded voice test equipment that needs a reproducible global line-side interface for evaluating PCM paths and telephone-channel behavior. A Si3050 can configure the DAA over SPI and exchange test voice traffic through the PCM highway and GCI interfaces. The separate line-side device makes it possible to construct controlled test loops and evaluate system behavior more systematically. Test boards should include the manufacturer-recommended protection and line-conditioning circuitry rather than relying on unprotected external telephone connections.
Inirekomenda
Industrial Voice Terminals
The SI3019-F-GS can support industrial voice terminals that connect analog lines to embedded communication equipment. Its global line-side DAA function, A-law companding, and configurable SPI control allow the terminal designer to use the Si3050 as the digital voice controller. This arrangement is useful in monitoring, intercom, and legacy communications systems where deterministic line-interface behavior is required. Designers should verify the complete operating-temperature and compliance requirements for the finished equipment rather than treating the IC-level interface as a complete regulatory approval.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SI3019-F-GS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SI3019-F-GSR | SI3019-F-GMR |
|---|---|---|---|
| Package | 16-SOIC | 16-SOIC | 16-SOIC |
| Brand | Skyworks Solutions, Inc. | Skyworks Solutions, Inc. | Skyworks Solutions, Inc. |
| Product Type | Global line-side Direct Access Arrangement | Global line-side Direct Access Arrangement | Enhanced global voice DAA |
| Companion Controller | Si3050 | Si3050 | Si3050 |
| Control Interface | SPI | SPI | SPI |
| Voice Data Interface | PCM highway data interface | PCM highway data interface | PCM highway data interface |
| Lifecycle Status | Last time buy | Last time buy | Last time buy |
Pangunahing mga Pagkakaiba
- Dedicated global line-side DAA with 8-bit loop-current reporting (kumpara saSI3019-F-GSR)
- 16-pin SOIC footprint enables reuse of existing voice-interface layouts (kumpara saSI3019-F-GMR)
- Programmable integration with the Si3050 voice controller (kumpara saSI3019-F-GSR)
Talaan ng Disenyo
Route the SPI and PCM highway signals as short, controlled-impedance digital connections away from the analog line-side network. Keep the external protection and line-conditioning components near the SI3019-F-GS pins, and follow the manufacturer reference schematic for component placement. This separation is important because SPI clock edges and PCM switching activity can otherwise couple into the line-side voice path and appear as audible or test-measurement noise.
Implement the supply network and decoupling exactly as shown in the manufacturer reference design, including the component values and return-current paths for the selected SI3019-F-GS configuration. The device is a line-side interface rather than a general-purpose logic IC, so correct supply settling and grounding are essential during hook-state transitions. Validate the design across line voltage, line current, and voice-channel operating conditions rather than checking only the idle state.
Do not substitute a TSSOP or QFN member merely because it carries the SI3019 name. The SI3019-F-GT and SI3019-F-FM use different packages and therefore require different PCB land patterns. A valid replacement must retain the 16-pin SOIC footprint and have compatible line-side functions. Confirm that reel-oriented ordering variants such as SI3019-F-GSR are acceptable to the assembly process before committing the MPN to the production BOM.
Impormasyon ng Pagsunod sa Kautusan
The manufacturer discontinuation notice confirms lifecycle and order restrictions but does not establish RoHS, REACH, halogen-free, lead-free, conflict-minerals, or automotive qualification status.