Texas Instruments

SN74LS245M - 3-State Octal Bus Transceiver | Texas Instruments

MPN: SN74LS245M ✓ Nakahanda
20-pin dual in-line package Package
MOQ: 1 |

SN74LS245M Ulas

Texas Instruments SN74LS245M is an octal bus transceiver with 3-state outputs, eight data lines per direction, and a 20-pin dual in-line package. It is designed for asynchronous, two-way communication between data buses, with separate direction and enable controls for bus isolation and drive management. The SN74LS245M belongs to the SNx4LS245 family of octal bus transceivers.

An octal bus transceiver is a bidirectional logic interface that connects two buses through eight parallel data lines. It can transmit data from bus A to bus B or from bus B to bus A, depending on the direction-control input. The 3-state outputs place each data line into a high-impedance state when the device is disabled, allowing multiple bus drivers to share the same physical bus without creating active drive conflicts.

Key features include eight 3-state data channels, bidirectional bus operation, a dedicated enable input for bus isolation, and a direction input for selecting the transmission path. The manufacturer identifies the family for asynchronous two-way bus communication, while its control-function implementation reduces external timing requirements. The 20-pin package provides a conventional through-hole footprint suitable for legacy computer, industrial-control, instrumentation, and embedded-system boards.

The SN74LS245 architecture separates the A-side and B-side data paths while using common direction and enable controls for all eight channels. When enable is asserted, the direction input determines which bus actively drives the data lines. When enable is deasserted, the output drivers enter the high-impedance state. This arrangement supports controlled bus sharing, CPU-to-peripheral data paths, bidirectional peripheral interfaces, and temporary isolation of a bus segment during system configuration or test.

Typical applications include bidirectional data-bus buffering in computer systems, programmable peripheral interfaces, memory-bus isolation, test and measurement equipment, and industrial control systems. In each case, the transceiver can reduce contention by disabling one bus segment when another driver must control the shared line. The device is particularly useful in designs that retain 5 V TTL-style logic and require eight parallel lines rather than a serial transceiver.

When laying out a board, place the SN74LS245M close to the connector or bus driver it isolates, route each data line as a short matched trace, and keep ground return paths continuous. Confirm the DIR and enable levels during reset so that no two enabled drivers contend on the same bus. Follow the manufacturer datasheet pin description table when assigning tracks because the package pin arrangement alternates A-side and B-side data signals.

This page consolidates the device function, bus-control behavior, package details, verified sourcing links, practical application guidance, and qualified same-footprint alternatives into an engineering reference for legacy TTL and LS-series designs.

Mga alternatibo na pwedeng ilagay na SN74LS245M — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok SN74LS245M (parehas na form factor at footprint) — pagkakaiba sa Data Direction, Output State, Package.

Texas Instruments
Data Direction: Bidirectional A-to-B or B-to-A
Output State: 3-state
Package: 20-pin PDIP
Ikabit sa SN74LS245M →

SN74LS245N

✅ Drop-In
Texas Instruments
📦 20-pin DIP
Octal non-inverting 3-state bus transceiver · 8 channels · 8 bits · Bidirectional A-to-B or B-to-A · 3-state · Non-inverting · 5.25 V maximum

Magkontak para sa presyo

Tingnan ang Datasheet →

HD74LS245FP

✅ Drop-In
📦 20-pin DIP
Cross-brand 74LS245 implementation with manufacturer-specific timing, temperature, and qualification ratings that must be compared with the original

📋 Alternatibo na Reference (hindi sa katalogo)

SN74LS245M Mga Spesipikasyon

Product Type Octal bus transceiver
Number of Data Lines 8 bits
Data Direction Bidirectional, 2-way
Bus Communication Asynchronous
Output State 3-state, high-impedance when disabled
Direction Control 1 DIR input
Enable Control 1 E input
Packhaging 20-pin dual in-line package
Bilang ng Pin 20 pins
Uri ng Pagpapasok Through-hole
Logic Family LS-series TTL

Pin Configuration ng SN74LS245M

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
Pin 1 1A — A-side data input or output for channel 1
Pin 2 2A — A-side data input or output for channel 2
Pin 3 GND — Ground reference
Pin 4 3A — A-side data input or output for channel 3
Pin 5 4A — A-side data input or output for channel 4
Pin 6 5A — A-side data input or output for channel 5
Pin 7 6A — A-side data input or output for channel 6
Pin 8 7A — A-side data input or output for channel 7
Pin 9 8A — A-side data input or output for channel 8
Pin 10 8B — B-side data input or output for channel 8
Pin 11 7B — B-side data input or output for channel 7
Pin 12 6B — B-side data input or output for channel 6
Pin 13 5B — B-side data input or output for channel 5
Pin 14 4B — B-side data input or output for channel 4
Pin 15 DIR — Direction control input
Pin 16 E — Output-enable input
Pin 17 3B — B-side data input or output for channel 3
Pin 18 2B — B-side data input or output for channel 2
Pin 19 1B — B-side data input or output for channel 1
Pin 20 VCC — Power supply

Tipikal na mga Gamit

SN74LS245M ay nararapat para sa 6 aplikasyons: Bidirectional Computer Data Buses, Programmable Peripheral Interface, Memory-Bus Isolation, Industrial Control Data Interfaces, Test and Measurement Equipment, Data-Bus Port Expansion.

🖥️

Bidirectional Computer Data Buses

The SN74LS245M fits legacy computer designs that require eight parallel data lines to communicate in either direction between a processor bus and a peripheral bus. Its 3-state outputs allow the transceiver to disconnect from a shared line when E is deasserted, reducing contention with another driver. DIR selects the active direction for all eight channels, while the 20-pin DIP package supports conventional through-hole board construction. The design must preserve adequate setup and hold timing around DIR and E changes, and it should verify that all participating drivers use a compatible enable sequence.

🔧

Programmable Peripheral Interface

The SN74LS245M is useful between a legacy processor and a bidirectional peripheral interface when eight data lines must share a common connector or logic node. The transceiver provides a defined direction-control path through DIR and can place all outputs in a high-impedance state with E. This arrangement allows a peripheral to be isolated during initialization without adding another multiplexing layer. Because the device is an octal 3-state interface rather than a level translator, the connected system should already use compatible logic voltage and timing, and the bus owner must prevent simultaneous active drive.

🏭

Memory-Bus Isolation

The SN74LS245M can isolate a bank of eight memory data lines during reset, configuration, or a bus-ownership transition. Asserting E enables the selected direction, while deasserting E creates eight high-impedance outputs that prevent the transceiver from driving the memory bus. This is useful in systems where temporary bus coexistence would otherwise produce contention. The implementation should define E early in the reset sequence, avoid changing DIR while E is asserted, and validate propagation-delay margin against the memory access timing specified for the exact device grade.

🏭

Industrial Control Data Interfaces

The SN74LS245M can connect an 8-bit control or measurement module to a field-bus adapter while maintaining a clear separation between the two bus directions. Its eight parallel channels support compact bidirectional data transfer, and the 3-state output simplifies disconnection of a local controller from a shared bus. For industrial equipment, confirm the exact device grade against the enclosure temperature and verify grounding and shielding practices around long cable interfaces. The logic-side timing margin should be reviewed at the system level rather than relying only on the nominal transceiver delay.

📺

Test and Measurement Equipment

The SN74LS245M is suitable for legacy test fixtures and measurement instruments that need to place an eight-bit data source on a shared bus under controlled conditions. The enable input gives the fixture a way to disconnect the source while another instrument owns the node, and DIR permits two-way communication without duplicating the data channel in hardware. For a bench instrument, use short, consistently routed traces and a continuous ground reference to limit data-integrity risk. Verify supply and timing specifications for the selected grade before connecting it to equipment with different TTL timing requirements.

📱

Data-Bus Port Expansion

The SN74LS245M can add a controlled eight-line port to a legacy bus controller whose existing I/O cannot safely drive another shared node. The eight 3-state channels provide parallel data paths, while DIR and E provide common-mode control over all lines rather than requiring individual gating circuits. This helps conserve controller pins and simplifies bus arbitration when several subsystems share the same wiring. The design must account for setup time around E and DIR changes and should use a defined default control state so the added port remains isolated during power-up and reset.

What is the SN74LS245M?
The SN74LS245M is an octal, bidirectional bus transceiver with eight 3-state data lines in a 20-pin dual in-line package. According to the Texas Instruments datasheet for the SN74LS245 family, it supports asynchronous two-way communication between data buses, with direction and enable controls for selecting the active data path or placing the outputs in a high-impedance state.
How does the SN74LS245M DIR pin work?
The DIR input selects the direction of data flow for all eight channels of the SN74LS245M. According to the Texas Instruments datasheet, asserting DIR permits transmission from bus A to bus B, while the opposite level permits transmission from bus B to bus A. The enable input must also be asserted for the outputs to actively drive the selected bus.
What happens when the SN74LS245M enable input is inactive?
Deasserting the enable input places the SN74LS245M outputs into the 3-state, high-impedance condition. According to the Texas Instruments datasheet, this isolates the transceiver from the connected bus and prevents active drive conflicts when another device must control the same data lines. The direction input does not override the disabled output state.
Where can I download the SN74LS245M datasheet PDF?
The official SN74LS245M datasheet PDF is available from the Texas Instruments document link on this page. It identifies the device as an octal bus transceiver with 3-state outputs for asynchronous two-way bus communication. Use the manufacturer pin-description table for the exact 20-pin dual in-line package assignments before laying out or modifying a PCB.
Where can I find the SN74LS245M pinout?
The SN74LS245M pinout is shown on the manufacturer datasheet and includes eight A-side data inputs, eight B-side data inputs, GND, VCC, DIR, and E across 20 pins. According to the Texas Instruments pin description table, the package uses a conventional dual in-line arrangement. Compare the numbered package diagram against the schematic before assigning connector or bus-trace positions.
Is SN74LS245N a drop-in replacement for SN74LS245M?
SN74LS245N is a same-family, pin-compatible 20-pin DIP option for many SN74LS245M applications, but qualification and temperature requirements must be checked before substitution. The SN74LS245N is listed by Texas Instruments as an octal transceiver with 3-state output, while SN74LS245M carries an M suffix that may denote a different qualification or temperature grade. Confirm the applicable grade in the manufacturer ordering information.
What is the best drop-in replacement for SN74LS245M?
SN74LS245N is the closest documented same-family 20-pin DIP replacement candidate for SN74LS245M, while HD74LS245FP is a documented cross-brand 74LS245-family alternative. The final choice depends on pin compatibility, operating-temperature grade, qualification, and supply status. Use the manufacturer datasheet and ordering table to verify those requirements before production use.
What can replace SN74LS245M in a legacy TTL bus design?
A legacy TTL bus design can consider SN74LS245N for a same-family 20-pin DIP path or HD74LS245FP for a documented cross-brand 74LS245 alternative. Both candidates must match the original DIR and E control behavior, eight data channels, and 3-state output arrangement. Verify timing, supply voltage, temperature grade, and qualification against the original system requirements.
Is SN74LS245M the same as SN74LS245N?
SN74LS245M and SN74LS245N share the core 74LS245 octal, bidirectional, 3-state transceiver function and 20-pin DIP architecture, but their suffix designations can represent different ordering, temperature, or qualification conditions. They should be treated as alternatives rather than assumed identical. Check the manufacturer ordering table for the exact grade and operating limits required by the equipment.
What are the key specifications of SN74LS245M that engineers should know?
The SN74LS245M is an 8-bit, octal, bidirectional bus transceiver with 3-state outputs, asynchronous two-way bus communication, separate DIR and E controls, and a 20-pin through-hole package. According to the Texas Instruments datasheet, its control-function implementation minimizes external timing requirements. Supply voltage, propagation delay, output-current limits, and temperature range must be selected from the manufacturer data for the exact grade.
When should I choose SN74LS245M over SN74LS245N?
Choose SN74LS245M when the equipment requires the specific M-grade ordering conditions, temperature capability, or qualification associated with that suffix. Choose SN74LS245N when its documented grade satisfies the design and a common 20-pin DIP replacement is preferred. The functional core is the same 74LS245 octal transceiver, so temperature grade, qualification, and lifecycle requirements should decide the selection.
Is SN74LS245M suitable for bidirectional memory-bus isolation?
The SN74LS245M is suitable for bidirectional bus isolation when the design uses 74LS-compatible logic and the enable input can control the required bus segment. Its eight 3-state channels support parallel data paths, while DIR selects the active transmission direction. Confirm propagation delay, output loading, and timing margin against the memory and bus-controller requirements before implementation.
How should DIR and E be controlled during reset in an SN74LS245M design?
Keep the SN74LS245M outputs disabled during reset so no external driver contends with another device on the shared bus. The E input provides the required 3-state isolation, while DIR should remain in a defined state before E is asserted. Confirm that every bus driver has a nonconflicting enable sequence, including memories, processors, and test equipment connected to the same lines.
Where can I buy SN74LS245M online?
Use the Request a Quote form on this page to request SN74LS245M availability, current lead time, and an order quote. The form connects the request with XAIPART without relying on a static price that can become outdated. Include the required quantity, package handling preference, date code requirement, and target shipment location in the request.
How much does SN74LS245M cost and what is its lead time?
Use the Request a Quote form on this page for the current SN74LS245M unit price, quantity pricing, stock position, and lead time. Pricing and lead time can change with exact quantity, sourcing condition, and market availability, so a current written quotation is the appropriate purchasing record. Do not rely on an archived catalog amount for production planning.

Impormasyon ng Talumpati sa Engineering for SN74LS245M — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose SN74LS245M when the equipment requires the specific M-grade ordering conditions and an eight-channel, bidirectional 3-state transceiver in a 20-pin DIP package. SN74LS245N is the practical same-manufacturer option for designs that do not require the M designation and whose temperature, qualification, and timing requirements match the N grade. HD74LS245FP provides a cross-brand sourcing path for a 74LS245-family design, but its timing, temperature, and qualification ratings should be checked against the original system. In every case, verify the DIR and E behavior, power requirements, propagation delay, and output-current capability before approving the substitution. Avoid selecting a non-transceiver or a differently organized buffer merely because it has the same channel count; pin-compatible logic direction and high-impedance control behavior are essential.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto SN74LS245N HD74LS245FP
Package 20-pin DIP 20-pin DIP 20-pin DIP
Brand Texas Instruments Texas Instruments Renesas Electronics
Product Type Octal bus transceiver Octal bus transceiver 74LS245-family octal bus transceiver
Number of Data Lines 8 bits 8 bits 8 bits
Data Direction Bidirectional, 2-way Bidirectional, 2-way Bidirectional, 2-way
Output State 3-state 3-state 3-state
Direction Control DIR input DIR input DIR input
Enable Control E input E input E input

Pangunahing mga Pagkakaiba

  • Maintains the complete 8-bit bidirectional 3-state interface (kumpara saHD74LS245FP)
  • Uses the same manufacturer and core SN74LS245 family (kumpara saSN74LS245N)
  • Supports deliberate eight-channel bus isolation (kumpara saSN74LS245N)

Talaan ng Disenyo

Keep the SN74LS245M close to the connector or shared-bus node and route all eight data lines with consistent geometry. Continuous ground-reference paths are important because every channel can switch between active-low, active-high, and high-impedance states. Place any termination components near the endpoint that represents the driven bus rather than scattering them across the board.

Never assert E while another device is actively driving the same bus. Use the E input to establish ownership before changing DIR, and keep E deasserted during reset. An undefined DIR level is harmless only while the transceiver is disabled; once E is asserted, DIR must have a valid logic level before the bus changes direction.

Place the device-ground connection and supply-decoupling arrangement directly according to the manufacturer layout guidance for the selected package. Because the SN74LS245M supports eight simultaneously active outputs, account for the aggregate bus-current load when calculating driver loading. Do not substitute a lower-capacity buffer or transceiver without checking both per-channel and total output-current requirements.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status was not stated in the product and datasheet links for the exact SN74LS245M orderable item. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed with the manufacturer using the exact grade and package designation.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

sn74ls245 datasheet SN74LS245M datasheet pdf SN74LS245M pinout SN74LS245M specifications SN74LS245M equivalent SN74LS245M replacement SN74LS245M cross reference SN74LS245M vs SN74LS245N SN74LS245M price SN74LS245M stock Texas Instruments SN74LS245M SN74LS245M 20 pin DIP SN74LS245M DIR E pin SN74LS245M bidirectional bus

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments SN74LS245M SN74LS245 SN74LS245N HD74LS245FP octal bus transceiver bidirectional transceiver bus transceiver logic IC interface IC TTL LS-series logic 3-state output high-impedance state asynchronous bus communication DIR control enable control 20-pin DIP dual in-line package through-hole package bidirectional data bus bus isolation memory bus industrial control test and measurement
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ