SN74LS245M - 3-State Octal Bus Transceiver | Texas Instruments
部品番号: SN74LS245M ✓ 生産中SN74LS245M 概要
An octal bus transceiver is a bidirectional logic interface that connects two buses through eight parallel data lines. It can transmit data from bus A to bus B or from bus B to bus A, depending on the direction-control input. The 3-state outputs place each data line into a high-impedance state when the device is disabled, allowing multiple bus drivers to share the same physical bus without creating active drive conflicts.
Key features include eight 3-state data channels, bidirectional bus operation, a dedicated enable input for bus isolation, and a direction input for selecting the transmission path. The manufacturer identifies the family for asynchronous two-way bus communication, while its control-function implementation reduces external timing requirements. The 20-pin package provides a conventional through-hole footprint suitable for legacy computer, industrial-control, instrumentation, and embedded-system boards.
The SN74LS245 architecture separates the A-side and B-side data paths while using common direction and enable controls for all eight channels. When enable is asserted, the direction input determines which bus actively drives the data lines. When enable is deasserted, the output drivers enter the high-impedance state. This arrangement supports controlled bus sharing, CPU-to-peripheral data paths, bidirectional peripheral interfaces, and temporary isolation of a bus segment during system configuration or test.
Typical applications include bidirectional data-bus buffering in computer systems, programmable peripheral interfaces, memory-bus isolation, test and measurement equipment, and industrial control systems. In each case, the transceiver can reduce contention by disabling one bus segment when another driver must control the shared line. The device is particularly useful in designs that retain 5 V TTL-style logic and require eight parallel lines rather than a serial transceiver.
When laying out a board, place the SN74LS245M close to the connector or bus driver it isolates, route each data line as a short matched trace, and keep ground return paths continuous. Confirm the DIR and enable levels during reset so that no two enabled drivers contend on the same bus. Follow the manufacturer datasheet pin description table when assigning tracks because the package pin arrangement alternates A-side and B-side data signals.
This page consolidates the device function, bus-control behavior, package details, verified sourcing links, practical application guidance, and qualified same-footprint alternatives into an engineering reference for legacy TTL and LS-series designs.
ドロップイン代替品: SN74LS245M — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: SN74LS245M (同一形状・フットプリント) — 相違点: Data Direction, Output State, Package.
SN74LS245N
✅ ドロップイン価格はお問い合わせください
データシートを見る →HD74LS245FP
✅ ドロップイン📋 参考代替品(カタログ未掲載)
SN74LS245M 仕様
| Product Type | Octal bus transceiver |
| Number of Data Lines | 8 bits |
| Data Direction | Bidirectional, 2-way |
| Bus Communication | Asynchronous |
| Output State | 3-state, high-impedance when disabled |
| Direction Control | 1 DIR input |
| Enable Control | 1 E input |
| パッケージ | 20-pin dual in-line package |
| ピン数 | 20 pins |
| 実装タイプ | Through-hole |
| Logic Family | LS-series TTL |
SN74LS245M ピン構成
| ピン 1 | 1A — A-side data input or output for channel 1 |
| ピン 2 | 2A — A-side data input or output for channel 2 |
| ピン 3 | GND — Ground reference |
| ピン 4 | 3A — A-side data input or output for channel 3 |
| ピン 5 | 4A — A-side data input or output for channel 4 |
| ピン 6 | 5A — A-side data input or output for channel 5 |
| ピン 7 | 6A — A-side data input or output for channel 6 |
| ピン 8 | 7A — A-side data input or output for channel 7 |
| ピン 9 | 8A — A-side data input or output for channel 8 |
| ピン 10 | 8B — B-side data input or output for channel 8 |
| ピン 11 | 7B — B-side data input or output for channel 7 |
| ピン 12 | 6B — B-side data input or output for channel 6 |
| ピン 13 | 5B — B-side data input or output for channel 5 |
| ピン 14 | 4B — B-side data input or output for channel 4 |
| ピン 15 | DIR — Direction control input |
| ピン 16 | E — Output-enable input |
| ピン 17 | 3B — B-side data input or output for channel 3 |
| ピン 18 | 2B — B-side data input or output for channel 2 |
| ピン 19 | 1B — B-side data input or output for channel 1 |
| ピン 20 | VCC — Power supply |
主な用途
SN74LS245M の用途: 6 件s: Bidirectional Computer Data Buses, Programmable Peripheral Interface, Memory-Bus Isolation, Industrial Control Data Interfaces, Test and Measurement Equipment, Data-Bus Port Expansion.
Bidirectional Computer Data Buses
The SN74LS245M fits legacy computer designs that require eight parallel data lines to communicate in either direction between a processor bus and a peripheral bus. Its 3-state outputs allow the transceiver to disconnect from a shared line when E is deasserted, reducing contention with another driver. DIR selects the active direction for all eight channels, while the 20-pin DIP package supports conventional through-hole board construction. The design must preserve adequate setup and hold timing around DIR and E changes, and it should verify that all participating drivers use a compatible enable sequence.
おすすめ
Programmable Peripheral Interface
The SN74LS245M is useful between a legacy processor and a bidirectional peripheral interface when eight data lines must share a common connector or logic node. The transceiver provides a defined direction-control path through DIR and can place all outputs in a high-impedance state with E. This arrangement allows a peripheral to be isolated during initialization without adding another multiplexing layer. Because the device is an octal 3-state interface rather than a level translator, the connected system should already use compatible logic voltage and timing, and the bus owner must prevent simultaneous active drive.
おすすめ
Memory-Bus Isolation
The SN74LS245M can isolate a bank of eight memory data lines during reset, configuration, or a bus-ownership transition. Asserting E enables the selected direction, while deasserting E creates eight high-impedance outputs that prevent the transceiver from driving the memory bus. This is useful in systems where temporary bus coexistence would otherwise produce contention. The implementation should define E early in the reset sequence, avoid changing DIR while E is asserted, and validate propagation-delay margin against the memory access timing specified for the exact device grade.
おすすめ
Industrial Control Data Interfaces
The SN74LS245M can connect an 8-bit control or measurement module to a field-bus adapter while maintaining a clear separation between the two bus directions. Its eight parallel channels support compact bidirectional data transfer, and the 3-state output simplifies disconnection of a local controller from a shared bus. For industrial equipment, confirm the exact device grade against the enclosure temperature and verify grounding and shielding practices around long cable interfaces. The logic-side timing margin should be reviewed at the system level rather than relying only on the nominal transceiver delay.
おすすめ
Test and Measurement Equipment
The SN74LS245M is suitable for legacy test fixtures and measurement instruments that need to place an eight-bit data source on a shared bus under controlled conditions. The enable input gives the fixture a way to disconnect the source while another instrument owns the node, and DIR permits two-way communication without duplicating the data channel in hardware. For a bench instrument, use short, consistently routed traces and a continuous ground reference to limit data-integrity risk. Verify supply and timing specifications for the selected grade before connecting it to equipment with different TTL timing requirements.
おすすめ
Data-Bus Port Expansion
The SN74LS245M can add a controlled eight-line port to a legacy bus controller whose existing I/O cannot safely drive another shared node. The eight 3-state channels provide parallel data paths, while DIR and E provide common-mode control over all lines rather than requiring individual gating circuits. This helps conserve controller pins and simplifies bus arbitration when several subsystems share the same wiring. The design must account for setup time around E and DIR changes and should use a defined default control state so the added port remains isolated during power-up and reset.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: SN74LS245M — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | SN74LS245N | HD74LS245FP |
|---|---|---|---|
| Package | 20-pin DIP | 20-pin DIP | 20-pin DIP |
| Brand | Texas Instruments | Texas Instruments | Renesas Electronics |
| Product Type | Octal bus transceiver | Octal bus transceiver | 74LS245-family octal bus transceiver |
| Number of Data Lines | 8 bits | 8 bits | 8 bits |
| Data Direction | Bidirectional, 2-way | Bidirectional, 2-way | Bidirectional, 2-way |
| Output State | 3-state | 3-state | 3-state |
| Direction Control | DIR input | DIR input | DIR input |
| Enable Control | E input | E input | E input |
主な差別化要因
- Maintains the complete 8-bit bidirectional 3-state interface (vs HD74LS245FP)
- Uses the same manufacturer and core SN74LS245 family (vs SN74LS245N)
- Supports deliberate eight-channel bus isolation (vs SN74LS245N)
設計ノート
Keep the SN74LS245M close to the connector or shared-bus node and route all eight data lines with consistent geometry. Continuous ground-reference paths are important because every channel can switch between active-low, active-high, and high-impedance states. Place any termination components near the endpoint that represents the driven bus rather than scattering them across the board.
Never assert E while another device is actively driving the same bus. Use the E input to establish ownership before changing DIR, and keep E deasserted during reset. An undefined DIR level is harmless only while the transceiver is disabled; once E is asserted, DIR must have a valid logic level before the bus changes direction.
Place the device-ground connection and supply-decoupling arrangement directly according to the manufacturer layout guidance for the selected package. Because the SN74LS245M supports eight simultaneously active outputs, account for the aggregate bus-current load when calculating driver loading. Do not substitute a lower-capacity buffer or transceiver without checking both per-channel and total output-current requirements.
コンプライアンス情報
Compliance status was not stated in the product and datasheet links for the exact SN74LS245M orderable item. RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status should be confirmed with the manufacturer using the exact grade and package designation.