SPC5748GGK1VM - 120MHz Tri-Core 6MB MCU | NXP
MPN: SPC5748GGK1VM ✓ NakahandaSPC5748GGK1VM Ulas
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. In the broader hierarchy, SPC5748GGK1VM is a 32-bit microcontroller, a RISC processor-based embedded controller, and a semiconductor designed to execute firmware and manage electronic systems. Its Tri-Core architecture provides dedicated execution resources within one package for concurrent control and communication tasks.
Verified distributor data identifies an e200z2/e200z4-based MPC57xx Qorivva device with 80MHz and 120MHz operating options. The controller provides 6MB, or 6M x 8 bits, of embedded Flash. Its 256-MAPPBGA package supports compact, high-density automotive PCB layouts, but exact power-supply limits, memory-map details, peripheral configuration, and temperature ratings were not included in the supplied records and must be confirmed in MPC5748G.pdf.
The principal design benefit is integration: multiple processing capability and 6MB of on-chip Flash reduce the need for external program memory in control-intensive systems. The Tri-Core platform can divide interrupt-heavy, communications, and supervisory workloads across its cores, subject to the memory and peripheral resources defined by the complete device configuration. The package’s 256-ball pitch and thermal requirements demand careful PCB escape routing and power-plane design.
Typical automotive uses include electronic control units, powertrain and chassis controllers, vehicle body modules, gateway systems, and motor-control platforms. Its 120MHz-class processing is also relevant to industrial automation where deterministic embedded control, robust Flash integration, and high-pin-count connectivity are valuable. Distributor listings also associate the device with compact IoT, wearable, and smart-home designs, although those markets should be qualified against the exact automotive-product requirements before use.
Engineers should preserve the 256-MAPPBGA footprint, ball assignment, power sequencing, decoupling, and exposed-pad thermal constraints during design-in. A software-compatible replacement must match more than processor speed: it must match Flash, memory organization, peripheral mapping, clocking, safety documentation, package, and production qualification. This page consolidates verified sourcing data, package information, selection guidance, and design cautions while marking unspecified technical parameters for further datasheet review.
Mga alternatibo na pwedeng ilagay na SPC5748GGK1VM — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok SPC5748GGK1VM (parehas na form factor at footprint) — pagkakaiba sa Flash Memory.
Wala ng magagamit na drop-in alternatibo para sa produkto na ito.
Hilingin ang AlternatiboSPC5748GGK1VM Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit Tri-Core microcontroller |
| Series | MPC57xx Qorivva |
| Processor Cores | 3 cores |
| Core Architecture | e200z2/e200z4 |
| Maximum Listed Clock Frequency | 120 MHz |
| Additional Listed Clock Frequency | 80 MHz |
| Flash Memory | 6 MB (6M x 8 bits) |
| Data Width | 32 bits |
| Packhaging | 256-MAPPBGA, 17 x 17 mm |
| Ball Count | 256 balls |
| Uri ng Pagpapasok | Surface mount |
| Original Manufacturer | Freescale Semiconductor |
| Current Brand | NXP Semiconductors |
Gabay sa Pin Configuration ng SPC5748GGK1VM 256-mappbga, 17 x 17 mm
Pin configuration para sa SPC5748GGK1VM (256-mappbga, 17 x 17 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa SPC5748GGK1VM.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SPC5748GGK1VM ay nararapat para sa 6 aplikasyons: Automotive Powertrain Control, Vehicle Chassis Control, Vehicle Gateway and Communication Hub, Industrial Motion and Motor Control, Embedded Safety and Diagnostics Platform, IoT Edge Controller.
Automotive Powertrain Control
The SPC5748GGK1VM fits powertrain-controller evaluation because its verified Tri-Core architecture provides three execution engines and its listed clock options reach 120MHz, while 6MB of Flash consolidates substantial control firmware on-chip. In an engine or electrified-powertrain controller, the cores could handle deterministic control, diagnostics, and communications when the detailed resource map permits. The 256-MAPPBGA package provides many signal connections but requires exact ball-map review, multilayer escape routing, and a thermal design matched to the official package drawing. Confirm the device’s exact temperature grade, safety level, analog interfaces, and hardware reference before production use.
Inirekomenda
Vehicle Chassis Control
The SPC5748GGK1VM is a candidate for chassis-control prototypes requiring a 32-bit Tri-Core processor, a listed 120MHz operating option, and 6MB of integrated Flash. Its multiple cores can support combinations of braking, steering, stability, diagnostics, and vehicle-network handling, subject to the exact peripheral configuration. The high-density 256-MAPPBGA package accommodates numerous external interfaces on a compact board but complicates assembly and inspection. Before schematic capture, verify supply rails, reset and clock requirements, communication peripherals, wake-up behavior, and every ball assignment against MPC5748G.pdf.
Inirekomenda
Vehicle Gateway and Communication Hub
The SPC5748GGK1VM can be evaluated for a vehicle gateway where protocol handling, diagnostics, and application tasks must coexist. Its verified three-core Tri-Core configuration provides processing parallelism, while the 6MB Flash capacity supports a comparatively large embedded software image. A gateway implementation would place the controller among CAN, Ethernet, LIN, or other communication transceivers, but the supplied data does not verify which interfaces are enabled on this exact ordering code. Designers should therefore confirm peripheral availability, DMA behavior, memory maps, and pin multiplexing before selecting companion transceivers or committing to the 17 x 17 mm BGA layout.
Inirekomenda
Industrial Motion and Motor Control
The SPC5748GGK1VM may suit industrial motion-control prototypes that benefit from three cores, up to the listed 120MHz option, and 6MB of on-chip Flash. In a motor-control system, one core could execute a fast control loop while others manage sequencing, communications, and diagnostics if the exact peripherals and clock architecture support that partitioning. The controller’s 256-MAPPBGA package is compact for its connection count but demands advanced PCB assembly and careful power integrity. Verify PWM and capture resources, analog channels, analog-to-digital converters, timing units, safety documentation, and operating-temperature limits directly in the official data sheet.
Inirekomenda
Embedded Safety and Diagnostics Platform
The SPC5748GGK1VM is relevant to embedded diagnostics because its three-core architecture and 6MB Flash provide resources for concurrent monitoring, fault handling, and application firmware. Such a platform could partition lockstep or monitoring functions only after confirming the exact safety mechanisms and software architecture documented for the device. The high-ball-count MAPPBGA package can expose extensive I/O, yet signal integrity, power sequencing, and thermal verification become critical design activities. No safety qualification or temperature grade was present in the supplied evidence, so automotive or industrial safety claims must remain unconfirmed until supported by the official MPC5748G documentation.
Inirekomenda
IoT Edge Controller
The SPC5748GGK1VM can serve as a prototype controller for an IoT edge system requiring more local computation and program storage than a basic 8- or 32-bit microcontroller. Its verified Tri-Core configuration, 6MB Flash, and 120MHz listed clock option suit concurrent protocol, control, and data-processing tasks. However, distributor snippets mentioning IoT are not qualification evidence. The engineer must confirm standby behavior, available communication peripherals, memory protection, security features, supply voltage, temperature range, and long-term availability. The 256-MAPPBGA assembly also requires qualified PCB fabrication, BGA inspection, and thermal validation before deployment.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SPC5748GGK1VM — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Pangunahing mga Pagkakaiba
- Three-core processing within a single automotive microcontroller (kumpara saMC56F8347VPY60)
- Large verified integrated Flash capacity (kumpara saMC9S12XA512CFV)
- High-density 256-ball package integration (kumpara saSPC5744PFK1AKLQ8)
Talaan ng Disenyo
Treat the 256-MAPPBGA as a high-density, multilayer-routing problem. Obtain the official ball map and mechanical drawing, preserve the exact land pattern, and verify escape-routing access before schematic or footprint release. Do not derive pin assignments from distributor snippets. Validate drill-to-copper registration, solder-mask definition, assembly stencil design, and inspection access with the selected board manufacturer.
Supply rails, sequencing, current limits, and decoupling values were not included in the verified records, so they must be taken directly from MPC5748G.pdf. Place required bulk and high-frequency decoupling at the associated power balls using a low-impedance plane strategy, and keep sensitive return paths continuous. Confirm reset behavior and power-up sequencing before enabling external peripherals to prevent unintended state or bus contention.
The available data confirms a 256-MAPPBGA package but does not provide junction-to-ambient resistance, maximum junction temperature, or exposed-pad construction. Do not estimate production thermal performance from package size alone. Use the manufacturer’s thermal model and layout guidance, maintain copper spreading beneath and around the device where permitted by the package drawing, and validate the assembled PCB across expected ambient and operating-load conditions.
Do not treat another SPC57xx member as a drop-in replacement solely because it is related or has a similar ordering code. Compare exact flash size and organization, RAM, core configuration, clocking, peripheral set, ball map, voltage domains, temperature grade, qualification, startup code, and software configuration. The supplied cross-reference searches did not identify a verified pin-compatible substitute for SPC5748GGK1VM.
Impormasyon ng Pagsunod sa Kautusan
The supplied search records do not provide authoritative environmental or automotive-qualification statements for the exact ordering code. MPC57xx family context alone is insufficient to claim RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 compliance.
