SPC5748GGK1VM - 120MHz Tri-Core 6MB MCU | NXP
MPN: SPC5748GGK1VM ✓ Hoạt độngSPC5748GGK1VM Tóm tắt
A microcontroller is a programmable semiconductor that integrates a CPU, memory, and peripherals into one device. In the broader hierarchy, SPC5748GGK1VM is a 32-bit microcontroller, a RISC processor-based embedded controller, and a semiconductor designed to execute firmware and manage electronic systems. Its Tri-Core architecture provides dedicated execution resources within one package for concurrent control and communication tasks.
Verified distributor data identifies an e200z2/e200z4-based MPC57xx Qorivva device with 80MHz and 120MHz operating options. The controller provides 6MB, or 6M x 8 bits, of embedded Flash. Its 256-MAPPBGA package supports compact, high-density automotive PCB layouts, but exact power-supply limits, memory-map details, peripheral configuration, and temperature ratings were not included in the supplied records and must be confirmed in MPC5748G.pdf.
The principal design benefit is integration: multiple processing capability and 6MB of on-chip Flash reduce the need for external program memory in control-intensive systems. The Tri-Core platform can divide interrupt-heavy, communications, and supervisory workloads across its cores, subject to the memory and peripheral resources defined by the complete device configuration. The package’s 256-ball pitch and thermal requirements demand careful PCB escape routing and power-plane design.
Typical automotive uses include electronic control units, powertrain and chassis controllers, vehicle body modules, gateway systems, and motor-control platforms. Its 120MHz-class processing is also relevant to industrial automation where deterministic embedded control, robust Flash integration, and high-pin-count connectivity are valuable. Distributor listings also associate the device with compact IoT, wearable, and smart-home designs, although those markets should be qualified against the exact automotive-product requirements before use.
Engineers should preserve the 256-MAPPBGA footprint, ball assignment, power sequencing, decoupling, and exposed-pad thermal constraints during design-in. A software-compatible replacement must match more than processor speed: it must match Flash, memory organization, peripheral mapping, clocking, safety documentation, package, and production qualification. This page consolidates verified sourcing data, package information, selection guidance, and design cautions while marking unspecified technical parameters for further datasheet review.
Bộ thay thế dễ dàng lắp đặt cho SPC5748GGK1VM — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với SPC5748GGK1VM (cùng hình factor và footprint) — khác nhau ở Flash Memory.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếSPC5748GGK1VM Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit Tri-Core microcontroller |
| Series | MPC57xx Qorivva |
| Processor Cores | 3 cores |
| Core Architecture | e200z2/e200z4 |
| Maximum Listed Clock Frequency | 120 MHz |
| Additional Listed Clock Frequency | 80 MHz |
| Flash Memory | 6 MB (6M x 8 bits) |
| Data Width | 32 bits |
| Hộp | 256-MAPPBGA, 17 x 17 mm |
| Ball Count | 256 balls |
| Kiểu lắp đặt | Surface mount |
| Original Manufacturer | Freescale Semiconductor |
| Current Brand | NXP Semiconductors |
Hướng dẫn cấu hình chân SPC5748GGK1VM 256-mappbga, 17 x 17 mm
Cấu hình chân cho SPC5748GGK1VM (256-mappbga, 17 x 17 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho SPC5748GGK1VM.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SPC5748GGK1VM phù hợp cho 6 Áp dụngs: Automotive Powertrain Control, Vehicle Chassis Control, Vehicle Gateway and Communication Hub, Industrial Motion and Motor Control, Embedded Safety and Diagnostics Platform, IoT Edge Controller.
Automotive Powertrain Control
The SPC5748GGK1VM fits powertrain-controller evaluation because its verified Tri-Core architecture provides three execution engines and its listed clock options reach 120MHz, while 6MB of Flash consolidates substantial control firmware on-chip. In an engine or electrified-powertrain controller, the cores could handle deterministic control, diagnostics, and communications when the detailed resource map permits. The 256-MAPPBGA package provides many signal connections but requires exact ball-map review, multilayer escape routing, and a thermal design matched to the official package drawing. Confirm the device’s exact temperature grade, safety level, analog interfaces, and hardware reference before production use.
Được đề xuất
Vehicle Chassis Control
The SPC5748GGK1VM is a candidate for chassis-control prototypes requiring a 32-bit Tri-Core processor, a listed 120MHz operating option, and 6MB of integrated Flash. Its multiple cores can support combinations of braking, steering, stability, diagnostics, and vehicle-network handling, subject to the exact peripheral configuration. The high-density 256-MAPPBGA package accommodates numerous external interfaces on a compact board but complicates assembly and inspection. Before schematic capture, verify supply rails, reset and clock requirements, communication peripherals, wake-up behavior, and every ball assignment against MPC5748G.pdf.
Được đề xuất
Vehicle Gateway and Communication Hub
The SPC5748GGK1VM can be evaluated for a vehicle gateway where protocol handling, diagnostics, and application tasks must coexist. Its verified three-core Tri-Core configuration provides processing parallelism, while the 6MB Flash capacity supports a comparatively large embedded software image. A gateway implementation would place the controller among CAN, Ethernet, LIN, or other communication transceivers, but the supplied data does not verify which interfaces are enabled on this exact ordering code. Designers should therefore confirm peripheral availability, DMA behavior, memory maps, and pin multiplexing before selecting companion transceivers or committing to the 17 x 17 mm BGA layout.
Được đề xuất
Industrial Motion and Motor Control
The SPC5748GGK1VM may suit industrial motion-control prototypes that benefit from three cores, up to the listed 120MHz option, and 6MB of on-chip Flash. In a motor-control system, one core could execute a fast control loop while others manage sequencing, communications, and diagnostics if the exact peripherals and clock architecture support that partitioning. The controller’s 256-MAPPBGA package is compact for its connection count but demands advanced PCB assembly and careful power integrity. Verify PWM and capture resources, analog channels, analog-to-digital converters, timing units, safety documentation, and operating-temperature limits directly in the official data sheet.
Được đề xuất
Embedded Safety and Diagnostics Platform
The SPC5748GGK1VM is relevant to embedded diagnostics because its three-core architecture and 6MB Flash provide resources for concurrent monitoring, fault handling, and application firmware. Such a platform could partition lockstep or monitoring functions only after confirming the exact safety mechanisms and software architecture documented for the device. The high-ball-count MAPPBGA package can expose extensive I/O, yet signal integrity, power sequencing, and thermal verification become critical design activities. No safety qualification or temperature grade was present in the supplied evidence, so automotive or industrial safety claims must remain unconfirmed until supported by the official MPC5748G documentation.
Được đề xuất
IoT Edge Controller
The SPC5748GGK1VM can serve as a prototype controller for an IoT edge system requiring more local computation and program storage than a basic 8- or 32-bit microcontroller. Its verified Tri-Core configuration, 6MB Flash, and 120MHz listed clock option suit concurrent protocol, control, and data-processing tasks. However, distributor snippets mentioning IoT are not qualification evidence. The engineer must confirm standby behavior, available communication peripherals, memory protection, security features, supply voltage, temperature range, and long-term availability. The 256-MAPPBGA assembly also requires qualified PCB fabrication, BGA inspection, and thermal validation before deployment.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho SPC5748GGK1VM — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
Bảo phân biệt quan trọng
- Three-core processing within a single automotive microcontroller (vsMC56F8347VPY60)
- Large verified integrated Flash capacity (vsMC9S12XA512CFV)
- High-density 256-ball package integration (vsSPC5744PFK1AKLQ8)
Ghi chú thiết kế
Treat the 256-MAPPBGA as a high-density, multilayer-routing problem. Obtain the official ball map and mechanical drawing, preserve the exact land pattern, and verify escape-routing access before schematic or footprint release. Do not derive pin assignments from distributor snippets. Validate drill-to-copper registration, solder-mask definition, assembly stencil design, and inspection access with the selected board manufacturer.
Supply rails, sequencing, current limits, and decoupling values were not included in the verified records, so they must be taken directly from MPC5748G.pdf. Place required bulk and high-frequency decoupling at the associated power balls using a low-impedance plane strategy, and keep sensitive return paths continuous. Confirm reset behavior and power-up sequencing before enabling external peripherals to prevent unintended state or bus contention.
The available data confirms a 256-MAPPBGA package but does not provide junction-to-ambient resistance, maximum junction temperature, or exposed-pad construction. Do not estimate production thermal performance from package size alone. Use the manufacturer’s thermal model and layout guidance, maintain copper spreading beneath and around the device where permitted by the package drawing, and validate the assembled PCB across expected ambient and operating-load conditions.
Do not treat another SPC57xx member as a drop-in replacement solely because it is related or has a similar ordering code. Compare exact flash size and organization, RAM, core configuration, clocking, peripheral set, ball map, voltage domains, temperature grade, qualification, startup code, and software configuration. The supplied cross-reference searches did not identify a verified pin-compatible substitute for SPC5748GGK1VM.
Thông tin tuân thủ
The supplied search records do not provide authoritative environmental or automotive-qualification statements for the exact ordering code. MPC57xx family context alone is insufficient to claim RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 compliance.
