STM32F031C6T6 - 48MHz 32KB Cortex-M0 MCU | STMicroelectronics
MPN: STM32F031C6T6 ✓ NakahandaSTM32F031C6T6 Ulas
An embedded microcontroller is a self-contained programmable controller used to monitor inputs, execute control logic, and drive outputs in products such as instruments, appliances, industrial modules, and communication equipment. The STM32F031C6T6 uses the ARM Cortex-M0 architecture, a compact processor core designed for low-complexity control tasks, while its operating frequency supports responsive software execution and peripheral activity.
Verified distributor information identifies the part as a 32-bit, 48 MHz microcontroller with 32 KB Flash organized as 32K x 8. The STM32F031x4/x6 family is described by STMicroelectronics as incorporating the ARM Cortex-M0 core and high-speed embedded resources. The exact RAM size, ADC resolution, timer count, supply range, and package pin assignments are not provided in the supplied verified excerpts and are therefore marked as data needed below.
Typical design uses include sensor conditioning, motor or actuator sequencing, digital control panels, low-cost communications, LED control, and general embedded products. Firmware should be developed with the STM32 toolchain and configured around the exact datasheet pinout and peripheral characteristics. Hardware design must preserve the package footprint and verify every signal, power pin, decoupling requirement, and exposed-pin connection against the manufacturer datasheet.
This page combines verified manufacturer and distributor information with explicit data gaps rather than inventing electrical values. It is intended to support initial component selection, sourcing, and comparison while directing engineers to the official STMicroelectronics documentation for final design release.
The information is current as of 2026-10-23.
Mga alternatibo na pwedeng ilagay na STM32F031C6T6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok STM32F031C6T6 (parehas na form factor at footprint) — pagkakaiba sa Flash Memory, Package, RoHS Status.
HK32F031C6T6
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
STM32F031C6T6 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum Operating Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Processor Architecture | ARM Cortex-M0 32-bit RISC |
| Series | STM32F031x4/x6 |
| Packhaging | 48-LQFP (7 x 7 mm) |
| Uri ng Pagpapasok | Surface Mount |
| Timer Count | 9 timers |
| Tindminan RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Datasheet Page Count | 106 pages |
Gabay sa Pin Configuration ng STM32F031C6T6 48-lqfp (7 x 7 mm)
Pin configuration para sa STM32F031C6T6 (48-lqfp (7 x 7 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa STM32F031C6T6.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
STM32F031C6T6 ay nararapat para sa 6 aplikasyons: Embedded Sensor Control, Low-Cost Digital Control Panel, Motor and Actuator Sequencing, Industrial Communication Module, LED Lighting and Display Control, Battery-Powered Embedded Device.
Embedded Sensor Control
The STM32F031C6T6 fits compact sensor-control products that acquire digital or analog measurements and apply embedded logic without requiring a high-end processor. Its 48 MHz ARM Cortex-M0 core provides a defined execution platform, while 32 KB Flash supports a focused firmware image for calibration, filtering, thresholds, and state management. The 48-LQFP package is useful when a modest number of external connections and a conventional surface-mount assembly flow are needed. Before final design release, verify the exact ADC, GPIO, supply, and pin functions from the STMicroelectronics datasheet; the supplied excerpt does not provide those values.
Inirekomenda
Low-Cost Digital Control Panel
The STM32F031C6T6 can serve as the controller for a compact keypad, indicator, relay-sequencing, or user-interface module. A 48 MHz Cortex-M0 core is suitable for deterministic control loops and debouncing, while 32 KB Flash can hold a focused application program. The 48-LQFP 7 x 7 mm package supports conventional PCB routing and automated assembly. The engineer must confirm pin multiplexing, I/O voltage, reset behavior, and programming access in the complete datasheet before assigning panel signals, because those details are not present in the supplied search excerpts.
Inirekomenda
Motor and Actuator Sequencing
The STM32F031C6T6 is applicable to small motors, valves, pumps, and actuator modules where a microcontroller must coordinate commands, timing, interlocks, and status feedback. The 48 MHz ARM Cortex-M0 core provides a practical control-processing resource, and 32 KB Flash supports a dedicated sequencing program rather than a general-purpose operating system. A 48-LQFP package provides enough physical footprint flexibility for a small mixed-signal controller board. Confirm timer outputs, pin alternate functions, supply requirements, and thermal conditions against the official datasheet before connecting power stages.
Inirekomenda
Industrial Communication Module
The STM32F031C6T6 can be used in a small communication endpoint that converts sensor or control data into a serial network message. The Cortex-M0 core and 32 KB Flash provide a compact firmware platform for protocol framing, command handling, and status reporting, while the 48-LQFP package offers a conventional surface-mount footprint. The supplied data identifies the product as a general STM32F0 microcontroller but does not specify UART, SPI, I2C, USB, or other interface availability. Those interface resources and their electrical limits must be verified from the official STM32F031C6 documentation before selecting the communication architecture.
Inirekomenda
LED Lighting and Display Control
The STM32F031C6T6 is suitable for compact LED controllers, status indicators, and small display-control boards where the firmware must coordinate timing, modes, and user commands. A 48 MHz processor supports responsive control logic, and 32 KB Flash is suitable for a focused application rather than a large graphical application. The 48-LQFP footprint can simplify routing compared with a very small package, although actual pin availability and timer functions must be confirmed from the manufacturer datasheet. Include current limiting, thermal design, and appropriate interface protection in the final hardware design.
Inirekomenda
Battery-Powered Embedded Device
The STM32F031C6T6 can form the control core of a battery-powered embedded device when low-cost processing, compact packaging, and dedicated control firmware are priorities. Its 32-bit Cortex-M0 architecture supports efficient control code, and the 32 KB Flash memory provides room for a constrained application. The available power-management modes, sleep behavior, current consumption, and operating voltage are not specified in the supplied excerpts, so battery-life engineering cannot be finalized from this page alone. Validate low-power modes, wake sources, regulator losses, and peripheral shutdown behavior on the target board.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for STM32F031C6T6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | HK32F031C6T6 |
|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm), same pinout reported |
| Brand | STMicroelectronics | HK32 |
Pangunahing mga Pagkakaiba
- STMicroelectronics STM32F031C6T6 provides a documented 32 KB Flash configuration in the supplied distributor data. (kumpara saHK32F031C6T6)
- The target is explicitly identified as a 48 MHz ARM Cortex-M0 MCU. (kumpara saHK32F031C6T6)
- The target uses the STM32F031C6 manufacturer ecosystem and exact package designation. (kumpara saHK32F031C6T6)
Talaan ng Disenyo
Use the official STM32F031C6T6 48-LQFP pinout and land pattern during PCB layout. Place decoupling and support components according to the manufacturer reference design, and keep the package orientation tied to the pin-1 marker. Do not assign power, reset, programming, or alternate-function pins from memory; the supplied excerpts identify the package but do not provide individual pin assignments.
Validate the complete power tree before powering the target board. The supplied data confirms a 32-bit Cortex-M0 device operating up to 48 MHz but does not specify its supply range, regulator requirements, or I/O voltage domains. Check the exact operating voltage and absolute maximum limits in the STMicroelectronics datasheet, then size local decoupling and regulator headroom for the final peripheral load.
Do not treat STM32F031C6T6, STM32F031C8T6, STM32F051C8T6, or HK32F031C6T6 as interchangeable without checking the complete datasheet. Similar family names do not guarantee identical memory, peripherals, pin functions, voltage limits, or firmware behavior. For a cross-brand replacement, create a comparison matrix and test reset, clock startup, ADC, timers, serial interfaces, low-power modes, programming, and boot behavior.
Route sensitive analog, clock, and communication signals according to the selected application. Keep the MCU supply path short and place high-frequency bypass capacitors close to the relevant supply pins. If the design uses external crystals, communication lines, or precision analog measurements, follow the manufacturer reference layout and preserve controlled return paths; exact values are unavailable in the supplied excerpts and must be taken from the datasheet.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified data does not state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status. AEC-Q100 is not applicable to the general-purpose MCU based on the supplied information, but no automotive qualification claim is made.