STM32F031C6T6 - 48MHz 32KB Cortex-M0 MCU | STMicroelectronics
MPN: STM32F031C6T6 ✓ Hoạt độngSTM32F031C6T6 Tóm tắt
An embedded microcontroller is a self-contained programmable controller used to monitor inputs, execute control logic, and drive outputs in products such as instruments, appliances, industrial modules, and communication equipment. The STM32F031C6T6 uses the ARM Cortex-M0 architecture, a compact processor core designed for low-complexity control tasks, while its operating frequency supports responsive software execution and peripheral activity.
Verified distributor information identifies the part as a 32-bit, 48 MHz microcontroller with 32 KB Flash organized as 32K x 8. The STM32F031x4/x6 family is described by STMicroelectronics as incorporating the ARM Cortex-M0 core and high-speed embedded resources. The exact RAM size, ADC resolution, timer count, supply range, and package pin assignments are not provided in the supplied verified excerpts and are therefore marked as data needed below.
Typical design uses include sensor conditioning, motor or actuator sequencing, digital control panels, low-cost communications, LED control, and general embedded products. Firmware should be developed with the STM32 toolchain and configured around the exact datasheet pinout and peripheral characteristics. Hardware design must preserve the package footprint and verify every signal, power pin, decoupling requirement, and exposed-pin connection against the manufacturer datasheet.
This page combines verified manufacturer and distributor information with explicit data gaps rather than inventing electrical values. It is intended to support initial component selection, sourcing, and comparison while directing engineers to the official STMicroelectronics documentation for final design release.
The information is current as of 2026-10-23.
Bộ thay thế dễ dàng lắp đặt cho STM32F031C6T6 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F031C6T6 (cùng hình factor và footprint) — khác nhau ở Flash Memory, Package, RoHS Status.
HK32F031C6T6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32F031C6T6 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Maximum Operating Frequency | 48 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Processor Architecture | ARM Cortex-M0 32-bit RISC |
| Series | STM32F031x4/x6 |
| Hộp | 48-LQFP (7 x 7 mm) |
| Kiểu lắp đặt | Surface Mount |
| Timer Count | 9 timers |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Datasheet Page Count | 106 pages |
Hướng dẫn cấu hình chân STM32F031C6T6 48-lqfp (7 x 7 mm)
Cấu hình chân cho STM32F031C6T6 (48-lqfp (7 x 7 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F031C6T6.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F031C6T6 phù hợp cho 6 Áp dụngs: Embedded Sensor Control, Low-Cost Digital Control Panel, Motor and Actuator Sequencing, Industrial Communication Module, LED Lighting and Display Control, Battery-Powered Embedded Device.
Embedded Sensor Control
The STM32F031C6T6 fits compact sensor-control products that acquire digital or analog measurements and apply embedded logic without requiring a high-end processor. Its 48 MHz ARM Cortex-M0 core provides a defined execution platform, while 32 KB Flash supports a focused firmware image for calibration, filtering, thresholds, and state management. The 48-LQFP package is useful when a modest number of external connections and a conventional surface-mount assembly flow are needed. Before final design release, verify the exact ADC, GPIO, supply, and pin functions from the STMicroelectronics datasheet; the supplied excerpt does not provide those values.
Được đề xuất
Low-Cost Digital Control Panel
The STM32F031C6T6 can serve as the controller for a compact keypad, indicator, relay-sequencing, or user-interface module. A 48 MHz Cortex-M0 core is suitable for deterministic control loops and debouncing, while 32 KB Flash can hold a focused application program. The 48-LQFP 7 x 7 mm package supports conventional PCB routing and automated assembly. The engineer must confirm pin multiplexing, I/O voltage, reset behavior, and programming access in the complete datasheet before assigning panel signals, because those details are not present in the supplied search excerpts.
Được đề xuất
Motor and Actuator Sequencing
The STM32F031C6T6 is applicable to small motors, valves, pumps, and actuator modules where a microcontroller must coordinate commands, timing, interlocks, and status feedback. The 48 MHz ARM Cortex-M0 core provides a practical control-processing resource, and 32 KB Flash supports a dedicated sequencing program rather than a general-purpose operating system. A 48-LQFP package provides enough physical footprint flexibility for a small mixed-signal controller board. Confirm timer outputs, pin alternate functions, supply requirements, and thermal conditions against the official datasheet before connecting power stages.
Được đề xuất
Industrial Communication Module
The STM32F031C6T6 can be used in a small communication endpoint that converts sensor or control data into a serial network message. The Cortex-M0 core and 32 KB Flash provide a compact firmware platform for protocol framing, command handling, and status reporting, while the 48-LQFP package offers a conventional surface-mount footprint. The supplied data identifies the product as a general STM32F0 microcontroller but does not specify UART, SPI, I2C, USB, or other interface availability. Those interface resources and their electrical limits must be verified from the official STM32F031C6 documentation before selecting the communication architecture.
Được đề xuất
LED Lighting and Display Control
The STM32F031C6T6 is suitable for compact LED controllers, status indicators, and small display-control boards where the firmware must coordinate timing, modes, and user commands. A 48 MHz processor supports responsive control logic, and 32 KB Flash is suitable for a focused application rather than a large graphical application. The 48-LQFP footprint can simplify routing compared with a very small package, although actual pin availability and timer functions must be confirmed from the manufacturer datasheet. Include current limiting, thermal design, and appropriate interface protection in the final hardware design.
Được đề xuất
Battery-Powered Embedded Device
The STM32F031C6T6 can form the control core of a battery-powered embedded device when low-cost processing, compact packaging, and dedicated control firmware are priorities. Its 32-bit Cortex-M0 architecture supports efficient control code, and the 32 KB Flash memory provides room for a constrained application. The available power-management modes, sleep behavior, current consumption, and operating voltage are not specified in the supplied excerpts, so battery-life engineering cannot be finalized from this page alone. Validate low-power modes, wake sources, regulator losses, and peripheral shutdown behavior on the target board.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F031C6T6 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | HK32F031C6T6 |
|---|---|---|
| Package | 48-LQFP (7 x 7 mm) | 48-LQFP (7 x 7 mm), same pinout reported |
| Brand | STMicroelectronics | HK32 |
Bảo phân biệt quan trọng
- STMicroelectronics STM32F031C6T6 provides a documented 32 KB Flash configuration in the supplied distributor data. (vsHK32F031C6T6)
- The target is explicitly identified as a 48 MHz ARM Cortex-M0 MCU. (vsHK32F031C6T6)
- The target uses the STM32F031C6 manufacturer ecosystem and exact package designation. (vsHK32F031C6T6)
Ghi chú thiết kế
Use the official STM32F031C6T6 48-LQFP pinout and land pattern during PCB layout. Place decoupling and support components according to the manufacturer reference design, and keep the package orientation tied to the pin-1 marker. Do not assign power, reset, programming, or alternate-function pins from memory; the supplied excerpts identify the package but do not provide individual pin assignments.
Validate the complete power tree before powering the target board. The supplied data confirms a 32-bit Cortex-M0 device operating up to 48 MHz but does not specify its supply range, regulator requirements, or I/O voltage domains. Check the exact operating voltage and absolute maximum limits in the STMicroelectronics datasheet, then size local decoupling and regulator headroom for the final peripheral load.
Do not treat STM32F031C6T6, STM32F031C8T6, STM32F051C8T6, or HK32F031C6T6 as interchangeable without checking the complete datasheet. Similar family names do not guarantee identical memory, peripherals, pin functions, voltage limits, or firmware behavior. For a cross-brand replacement, create a comparison matrix and test reset, clock startup, ADC, timers, serial interfaces, low-power modes, programming, and boot behavior.
Route sensitive analog, clock, and communication signals according to the selected application. Keep the MCU supply path short and place high-frequency bypass capacitors close to the relevant supply pins. If the design uses external crystals, communication lines, or precision analog measurements, follow the manufacturer reference layout and preserve controlled return paths; exact values are unavailable in the supplied excerpts and must be taken from the datasheet.
Thông tin tuân thủ
The supplied verified data does not state RoHS, REACH, lead-free, halogen-free, or conflict-mineral status. AEC-Q100 is not applicable to the general-purpose MCU based on the supplied information, but no automotive qualification claim is made.