STMicroelectronics

STM32F207IEH6 - 120MHz Cortex-M3 MCU | STMicroelectronics

MPN: STM32F207IEH6 ✓ Nakahanda
176+25 UFBGA Package 120 MHz Speed 512 KB Memory
MOQ: 1 |

STM32F207IEH6 Ulas

The STMicroelectronics STM32F207IEH6 is a 32-bit Arm Cortex-M3 microcontroller operating at up to 120 MHz, with 512 KB of flash memory and a 176-ball plus 25-ball UFBGA package measuring 10 mm by 10 mm. It belongs to the STM32F20x family of high-performance Cortex-M3 microcontrollers, combining general-purpose embedded processing with a compact surface-mount package for space-constrained electronic systems.

A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces onto one package. Within the embedded-control hierarchy, the STM32F207IEH6 is an MCU, a microcontroller unit, rather than a discrete processor or fixed-function logic device. Its 32-bit Cortex-M3 architecture provides a common platform for executing control firmware, communication protocols, state machines, and supervisory functions in industrial, networking, consumer, and embedded equipment.

The principal device characteristics include a maximum core frequency of 120 MHz, 512 KB of flash organized as 512K by 8 bits, and a 176+25 UFBGA package. The flash capacity permits firmware, configuration data, boot code, and application logic to be stored locally. The 120 MHz operating point supports timing-sensitive processing, while the 10 mm by 10 mm package supports compact PCB layouts in applications where connector density and board area are important design constraints.

The STM32F20x family uses the Arm Cortex-M3 32-bit RISC core, and the STM32F207IEH6 is identified as a member of that family. Arm Cortex-M3 designs are commonly used for embedded control because they combine deterministic instruction execution with extensive peripheral integration. Exact peripheral availability, pin multiplexing, electrical limits, memory-map details, and clock-tree configuration should be confirmed in the official STM32F207IE datasheet before schematic capture or firmware development.

Typical uses include industrial controllers, communications equipment, motor and motion-control systems, test and measurement products, and connected embedded devices. In these applications, the 512 KB flash capacity can consolidate application firmware into one controller, while the 120 MHz core supports combinations of protocol handling, control-loop execution, and background tasks. Designers should still partition memory and processor load after identifying the exact peripheral set and middleware requirements.

A key implementation consideration is BGA assembly. The 176+25 UFBGA footprint requires a suitable PCB pad layout, controlled reflow profile, adequate solder-paste printing, and inspection coverage appropriate to the assembly process. Firmware configuration must also match the device's exact pinout, clock sources, and peripheral resources; use the manufacturer pin-definition and datasheet tables rather than assigning functions from another STM32 member.

This product record combines the manufacturer's family identification, exact package and memory characteristics, sourcing information, and engineering-oriented replacement guidance. It also highlights the distinction between a mechanically similar microcontroller and a true drop-in replacement: footprint compatibility alone does not guarantee identical peripherals, electrical behavior, firmware support, or production qualification.

Mga alternatibo na pwedeng ilagay na STM32F207IEH6 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok STM32F207IEH6 (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type.

STMicroelectronics
Package: 176+25 UFBGA (10 mm x 10 mm)
Product Type: 32-bit microcontroller
Ikabit sa STM32F207IEH6 →

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

STM32F207IEH6 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Processor Core Arm Cortex-M3
Instruction Set 32-bit RISC
Maximum CPU Frequency 120 MHz
Flash Memory 512 KB
Flash Organization 512K x 8 bits
Series STM32F20x
Packhaging 176+25 UFBGA
Package Dimensions 10 mm x 10 mm
Package Type UFBGA
Uri ng Pagpapasok Surface mount
Width ng Data Bus 32 bit

Gabay sa Pin Configuration ng STM32F207IEH6 ufbga

Pin configuration para sa STM32F207IEH6 (ufbga package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng ufbga package para sa STM32F207IEH6

Wala ng detalyadong pinout data na magagamit para sa STM32F207IEH6.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

STM32F207IEH6 ay nararapat para sa 6 aplikasyons: Industrial Communications Controller, Motor and Motion Control, Test and Measurement Equipment, Human-Machine Interface Controller, Secure Equipment Access Controller, Connected Embedded Data Logger.

🏭

Industrial Communications Controller

STM32F207IEH6 fits an industrial communications controller that must combine protocol handling with local supervisory logic. Its 120 MHz Arm Cortex-M3 core provides substantial instruction throughput for packet processing, state-machine execution, and real-time control, while 512 KB of flash provides room for the communications stack, configuration data, and application firmware. The device is placed as the principal controller between physical interfaces and the product's application logic. Designers should partition RAM carefully, verify every communications peripheral against the exact STM32F207IEH6 datasheet, and implement watchdog recovery for industrial reliability.

🔧

Motor and Motion Control

STM32F207IEH6 is well matched to compact motor and motion-control modules where deterministic control calculations must coexist with communication and safety monitoring. The 120 MHz Cortex-M3 execution rate supports faster control-loop execution and interrupt servicing, and 512 KB of flash can consolidate control code and parameter sets. The MCU can coordinate position feedback, drive commands, and host communications while monitoring system faults. Practical implementation requires confirming timer, encoder, PWM, and analog-input resources in the manufacturer datasheet and validating loop timing under worst-case interrupt load.

🖥️

Test and Measurement Equipment

STM32F207IEH6 can serve as the embedded control core in test and measurement equipment where the user interface, acquisition sequencing, instrument control, and data handling must share one processor. Its 120 MHz Cortex-M3 core supports responsive command handling, while 512 KB of flash accommodates firmware, calibration tables, and instrument-control routines. The compact 176+25 UFBGA package helps reduce PCB area in multi-channel or portable systems. Designers should map timing-critical inputs to verified timers, isolate analog and digital sections appropriately, and validate data-acquisition paths separately from control firmware.

📺

Human-Machine Interface Controller

STM32F207IEH6 fits an embedded human-machine interface controller that must process commands, update a display, scan controls, and manage external communication. The 120 MHz 32-bit core allows graphical or instrument-control firmware to perform background processing while servicing time-critical interface events, and the 512 KB flash capacity provides room for application code and interface resources. The 176+25 UFBGA package permits compact placement behind display and connector hardware. Pin multiplexing, display timing, external memory needs, and low-power behavior must be confirmed for the exact device before layout release.

🔒

Secure Equipment Access Controller

STM32F207IEH6 can coordinate access-control functions in equipment where credential handling, status reporting, and local decisions must operate independently of a host. The 120 MHz Cortex-M3 core supports cryptographic and protocol workloads typical of embedded control, while 512 KB of flash provides local storage for firmware and policy parameters. The MCU can manage lock actuators, card or keypad inputs, audit events, and administrative communication through verified peripherals. Security-sensitive implementations should add controlled key storage, authenticated firmware updates, input validation, and fault-response behavior appropriate to the equipment risk.

🧩

Connected Embedded Data Logger

STM32F207IEH6 fits a connected data logger that combines sensor acquisition, local storage, event filtering, and remote communications. Its 512 KB of flash can hold firmware, configuration, and compact event data, while the 120 MHz core can process incoming samples and manage protocol tasks concurrently. The 10 mm by 10 mm UFBGA package supports dense, portable electronics. A practical design should separate analog signal conditioning, regulate communication transceivers independently, use error checking for stored data, and define safe behavior for full memory, communication loss, and power interruption.

What is the STM32F207IEH6?
The STM32F207IEH6 is a STMicroelectronics 32-bit Arm Cortex-M3 microcontroller rated for operation up to 120 MHz, with 512 KB of flash memory and a 176+25 UFBGA package. According to the manufacturer's STM32F207IE product page, the STM32F20x family is built around the high-performance 32-bit RISC Cortex-M3 core. The MCU is intended for embedded control, communications, and compact industrial designs.
What are the key specifications of STM32F207IEH6 that engineers should know?
The key specifications are a 32-bit Arm Cortex-M3 core, up to 120 MHz operation, 512 KB of flash, and a 176+25 UFBGA package measuring 10 mm by 10 mm. The STM32F207IEH6 also uses a 32-bit RISC architecture and is identified as part of the STM32F20x family. Exact RAM, voltage limits, GPIO functions, and peripheral configurations must be checked in the manufacturer datasheet.
Where to download the STM32F207IEH6 datasheet PDF?
The official STM32F207IEH6 documentation starts at the manufacturer's STM32F207IE product page at st.com. Download the STM32F207IE datasheet from that page and use its pin-definition, electrical-characteristics, memory-map, and peripheral sections for design sign-off. The manufacturer product page states that the STM32F20x family uses a Cortex-M3 core operating at up to 120 MHz.
Where can I find the STM32F207IEH6 pinout?
Use the pin-definition tables in the official STM32F207IE datasheet for the exact 176+25 UFBGA assignment. The STM32F207IEH6 uses a 10 mm by 10 mm package, and its ball assignments must not be inferred from another STM32F2 device. Assign power, ground, clocks, debug, communications, and GPIO only after checking the package-specific pin table and alternate-function mapping.
How much flash memory does the STM32F207IEH6 have?
The STM32F207IEH6 contains 512 KB of flash memory, organized as 512K by 8 bits. This storage can hold application firmware, configuration tables, boot routines, and calibration data in one embedded controller. The manufacturer product page confirms the family's Cortex-M3 architecture and 120 MHz maximum frequency, while the exact listing for this MPN identifies the 512 KB flash configuration.
What is the maximum clock frequency of STM32F207IEH6?
The STM32F207IEH6 supports a maximum CPU frequency of 120 MHz. STMicroelectronics describes the STM32F20x family as being based on the high-performance Arm Cortex-M3 32-bit RISC core operating at up to 120 MHz. Clock-tree settings, PLL configuration, voltage conditions, and peripheral clock limits should be configured according to the official STM32F207IE datasheet.
Where can I buy STM32F207IEH6 online?
Use the Request a Quote form on this page to ask for STM32F207IEH6 availability, order quantity, lead time, and a current quotation. The exact device is also offered through the manufacturer's online store and authorized distribution channels. Current commercial terms can change quickly, so a quotation request is the most reliable way to confirm supply for your production schedule.
What is the price of STM32F207IEH6?
Use the Request a Quote form on this page for the current STM32F207IEH6 price and quantity breaks. The part is offered by the manufacturer and multiple distribution channels, but commercial pricing depends on quantity, package suffix, date, and channel availability. Supplying the required order quantity and target date in the request allows the quotation to reflect current procurement conditions.
Is STM32F207IEH6 in stock and what is its lead time?
Submit an STM32F207IEH6 Request a Quote to confirm current stock and lead time. One listing showed one unit available at the time of retrieval, but that condition is not a dependable planning input. For production procurement, request the quantity, delivery date, traceability requirements, and packaging details so the manufacturer or supply channel can confirm an actionable schedule.
What can replace STM32F207IEH6?
The safest replacement is an exact-orderable STM32F207IEH6 or a manufacturer-confirmed equivalent with the same 176+25 UFBGA footprint, electrical limits, peripheral map, and firmware compatibility. No cross-manufacturer candidate in the available cross-reference results was verified as a true pin-to-pin drop-in replacement for this exact MPN. A mechanically similar MCU should not be treated as drop-in without complete hardware and firmware validation.
STM32F207IEH6 vs STM32F217IGH6 - which is better for a 120 MHz embedded design?
STM32F207IEH6 is the safer choice when the design is specified around a 120 MHz Cortex-M3 MCU with 512 KB of flash and the 176+25 UFBGA package. The available comparison identifies STM32F217IGH6 as an STM32F217-series device with 1 MB of flash in a 176 UFBGA, so its memory size differs by 512 KB, or 100% relative to the target. Peripheral and pin-level validation remains required.
When should I choose STM32F207IEH6 instead of a similar STM32F2 MCU?
Choose STM32F207IEH6 when the bill of materials specifically requires a 120 MHz Arm Cortex-M3 MCU with 512 KB of flash in the 176+25 UFBGA package. It is especially appropriate when the surrounding firmware and PCB are already designed around the STM32F207IE device. Choose another family member only after confirming pin assignment, memory, peripherals, clocking, qualification, and software support.
Is STM32F207IEH6 suitable for industrial communications equipment?
STM32F207IEH6 can suit industrial communications equipment that benefits from a 120 MHz 32-bit Cortex-M3 core and 512 KB of onboard flash. Its 176+25 UFBGA package also supports compact board layouts. Suitability still depends on the required Ethernet, USB, serial, analog, timing, environmental, and safety functions, which must be matched against the manufacturer datasheet and your production environment.
How do I validate an STM32F207IEH6 replacement on an existing PCB?
Validate a replacement by comparing the 176+25 UFBGA ball map, supply rails, clock inputs, reset and boot pins, debug interface, every used GPIO alternate function, and peripheral timing requirements. Then compile and test the application against both devices and check brownout, EMC, temperature, and production-test behavior. Because the STM32F207IEH6 uses a dense 10 mm by 10 mm BGA, PCB assembly process controls are also critical.
Does the STM32F207IEH6 require special PCB assembly handling?
Yes, the 176+25 UFBGA package requires process controls appropriate for a dense, fine-pitch BGA. The package is 10 mm by 10 mm, so the PCB should follow STMicroelectronics land-pattern and assembly recommendations, with suitable solder-paste volume, stencil design, reflow profile, and inspection coverage. Inspect hidden joints because visual inspection of the board side alone cannot confirm every UFBGA connection.

Impormasyon ng Talumpati sa Engineering for STM32F207IEH6 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose STM32F207IEH6 when the design specifically requires a 120 MHz Arm Cortex-M3 MCU, 512 KB of flash, and the 176+25 UFBGA package. Its processing headroom is useful for communications, motion control, test equipment, and compact embedded products, while local flash can consolidate firmware and configuration. Select a different STM32F2 member only when its memory, pins, peripherals, temperature range, qualification, and software support are verified against the design. STM32F217IGH6 offers 1 MB of flash, 512 KB more than the target, but that memory increase alone does not establish drop-in compatibility. For a second-source MCU, treat the candidate as a new design unless the manufacturer confirms identical ball mapping, electrical behavior, peripheral architecture, and firmware implications.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 176+25 UFBGA, 10 mm x 10 mm
Brand STMicroelectronics
Processor Core Arm Cortex-M3
Maximum CPU Frequency 120 MHz
Flash Memory 512 KB (512K x 8 bits)
Architecture 32-bit RISC
Series STM32F20x
Data Bus Width 32 bit
Mounting Type Surface mount
Mounting Type Surface mount

Pangunahing mga Pagkakaiba

  • Exact 120 MHz Cortex-M3 configuration (kumpara saSTM32F217IGH6)
  • Dense 176+25 UFBGA integration (kumpara saSTM32F217IGH6)
  • Specific orderable configuration (kumpara saGeneric STM32F207 variants)

Talaan ng Disenyo

Use the manufacturer package drawing and recommended PCB land pattern for the 176+25 UFBGA rather than adapting a generic BGA footprint. Because the device uses a 10 mm by 10 mm package with dense ball spacing, verify solder-paste volume, stencil aperture design, and assembly tolerances with the selected PCB and assembly capability. Check the exposed thermal and ground-ball requirements against the exact pin-definition table before routing.

Route sensitive clock, communication, and analog-adjacent signals according to the STM32F207IEH6 reference guidance and the complete pin-definition table. Keep switching circuitry and high-current return paths away from precision analog inputs, use continuous return planes where appropriate, and place decoupling and support components directly at their associated pins. Do not infer unused-ball functions from another package or STM32F2 member.

A replacement that fits the board outline is not automatically a drop-in MCU. Before substitution, verify the 176+25 UFBGA ball map, power requirements, clock architecture, boot and reset behavior, peripheral mapping, memory requirements, development-tool support, and firmware initialization. After hardware equivalence is established, compare startup files, linker layouts, interrupt vectors, clock configuration, and driver assumptions between the original and candidate devices.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Compliance status was not stated in the product information for this exact MPN. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation with STMicroelectronics for the ordered device.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

STM32F207IEH6 datasheet STM32F207IEH6 pinout STM32F207IEH6 datasheet pdf STM32F207IEH6 equivalent STM32F207IEH6 replacement STM32F207IEH6 price STM32F207IEH6 stock STMicroelectronics STM32F207IEH6 STM32F207IEH6 120MHz STM32F207IEH6 512KB flash STM32F207IEH6 UFBGA package STM32F207IEH6 vs STM32F217IGH6 STM32F207IEH6 reference manual STM32F207IEH6 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

STMicroelectronics STM32F207IEH6 STM32F207IE STM32F20x STM32F217IGH6 Arm Cortex-M3 Arm 32-bit RISC microcontroller MCU embedded controller semiconductor 120 MHz 512 KB flash 176+25 UFBGA 10 mm x 10 mm package surface mount industrial communications motor control test and measurement UFBGA BGA Ethernet RS-232
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ