STM32F207IEH6 - 120MHz Cortex-M3 MCU | STMicroelectronics
料号: STM32F207IEH6 ✓ 量产中STM32F207IEH6 概述
A microcontroller is a semiconductor device that integrates a processor core, program memory, data memory, peripherals, and communication interfaces onto one package. Within the embedded-control hierarchy, the STM32F207IEH6 is an MCU, a microcontroller unit, rather than a discrete processor or fixed-function logic device. Its 32-bit Cortex-M3 architecture provides a common platform for executing control firmware, communication protocols, state machines, and supervisory functions in industrial, networking, consumer, and embedded equipment.
The principal device characteristics include a maximum core frequency of 120 MHz, 512 KB of flash organized as 512K by 8 bits, and a 176+25 UFBGA package. The flash capacity permits firmware, configuration data, boot code, and application logic to be stored locally. The 120 MHz operating point supports timing-sensitive processing, while the 10 mm by 10 mm package supports compact PCB layouts in applications where connector density and board area are important design constraints.
The STM32F20x family uses the Arm Cortex-M3 32-bit RISC core, and the STM32F207IEH6 is identified as a member of that family. Arm Cortex-M3 designs are commonly used for embedded control because they combine deterministic instruction execution with extensive peripheral integration. Exact peripheral availability, pin multiplexing, electrical limits, memory-map details, and clock-tree configuration should be confirmed in the official STM32F207IE datasheet before schematic capture or firmware development.
Typical uses include industrial controllers, communications equipment, motor and motion-control systems, test and measurement products, and connected embedded devices. In these applications, the 512 KB flash capacity can consolidate application firmware into one controller, while the 120 MHz core supports combinations of protocol handling, control-loop execution, and background tasks. Designers should still partition memory and processor load after identifying the exact peripheral set and middleware requirements.
A key implementation consideration is BGA assembly. The 176+25 UFBGA footprint requires a suitable PCB pad layout, controlled reflow profile, adequate solder-paste printing, and inspection coverage appropriate to the assembly process. Firmware configuration must also match the device's exact pinout, clock sources, and peripheral resources; use the manufacturer pin-definition and datasheet tables rather than assigning functions from another STM32 member.
This product record combines the manufacturer's family identification, exact package and memory characteristics, sourcing information, and engineering-oriented replacement guidance. It also highlights the distinction between a mechanically similar microcontroller and a true drop-in replacement: footprint compatibility alone does not guarantee identical peripherals, electrical behavior, firmware support, or production qualification.
直接替换替代料: STM32F207IEH6 ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: STM32F207IEH6 (相同外形与封装尺寸) ——差异在于 Package, Product Type.
该产品暂无直接替换替代料。
请求替代料STM32F207IEH6 最大额定值与电气特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Processor Core | Arm Cortex-M3 |
| Instruction Set | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 bits |
| Series | STM32F20x |
| 封装 | 176+25 UFBGA |
| Package Dimensions | 10 mm x 10 mm |
| Package Type | UFBGA |
| 安装类型 | Surface mount |
| 数据总线宽度 | 32 bit |
STM32F207IEH6 ufbga 引脚配置指南
STM32F207IEH6(ufbga 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。
暂无详细引脚数据: STM32F207IEH6.
请参阅 数据手册 以查看完整引脚配置。
典型应用
STM32F207IEH6 适用于 6 应用s: Industrial Communications Controller, Motor and Motion Control, Test and Measurement Equipment, Human-Machine Interface Controller, Secure Equipment Access Controller, Connected Embedded Data Logger.
Industrial Communications Controller
STM32F207IEH6 fits an industrial communications controller that must combine protocol handling with local supervisory logic. Its 120 MHz Arm Cortex-M3 core provides substantial instruction throughput for packet processing, state-machine execution, and real-time control, while 512 KB of flash provides room for the communications stack, configuration data, and application firmware. The device is placed as the principal controller between physical interfaces and the product's application logic. Designers should partition RAM carefully, verify every communications peripheral against the exact STM32F207IEH6 datasheet, and implement watchdog recovery for industrial reliability.
推荐
Motor and Motion Control
STM32F207IEH6 is well matched to compact motor and motion-control modules where deterministic control calculations must coexist with communication and safety monitoring. The 120 MHz Cortex-M3 execution rate supports faster control-loop execution and interrupt servicing, and 512 KB of flash can consolidate control code and parameter sets. The MCU can coordinate position feedback, drive commands, and host communications while monitoring system faults. Practical implementation requires confirming timer, encoder, PWM, and analog-input resources in the manufacturer datasheet and validating loop timing under worst-case interrupt load.
推荐
Test and Measurement Equipment
STM32F207IEH6 can serve as the embedded control core in test and measurement equipment where the user interface, acquisition sequencing, instrument control, and data handling must share one processor. Its 120 MHz Cortex-M3 core supports responsive command handling, while 512 KB of flash accommodates firmware, calibration tables, and instrument-control routines. The compact 176+25 UFBGA package helps reduce PCB area in multi-channel or portable systems. Designers should map timing-critical inputs to verified timers, isolate analog and digital sections appropriately, and validate data-acquisition paths separately from control firmware.
推荐
Human-Machine Interface Controller
STM32F207IEH6 fits an embedded human-machine interface controller that must process commands, update a display, scan controls, and manage external communication. The 120 MHz 32-bit core allows graphical or instrument-control firmware to perform background processing while servicing time-critical interface events, and the 512 KB flash capacity provides room for application code and interface resources. The 176+25 UFBGA package permits compact placement behind display and connector hardware. Pin multiplexing, display timing, external memory needs, and low-power behavior must be confirmed for the exact device before layout release.
推荐
Secure Equipment Access Controller
STM32F207IEH6 can coordinate access-control functions in equipment where credential handling, status reporting, and local decisions must operate independently of a host. The 120 MHz Cortex-M3 core supports cryptographic and protocol workloads typical of embedded control, while 512 KB of flash provides local storage for firmware and policy parameters. The MCU can manage lock actuators, card or keypad inputs, audit events, and administrative communication through verified peripherals. Security-sensitive implementations should add controlled key storage, authenticated firmware updates, input validation, and fault-response behavior appropriate to the equipment risk.
推荐
Connected Embedded Data Logger
STM32F207IEH6 fits a connected data logger that combines sensor acquisition, local storage, event filtering, and remote communications. Its 512 KB of flash can hold firmware, configuration, and compact event data, while the 120 MHz core can process incoming samples and manage protocol tasks concurrently. The 10 mm by 10 mm UFBGA package supports dense, portable electronics. A practical design should separate analog signal conditioning, regulate communication transceivers independently, use error checking for stored data, and define safe behavior for full memory, communication loss, and power interruption.
推荐
推荐产品汇总
工程参考数据: STM32F207IEH6 ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 |
|---|---|
| Package | 176+25 UFBGA, 10 mm x 10 mm |
| Brand | STMicroelectronics |
| Processor Core | Arm Cortex-M3 |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 512 KB (512K x 8 bits) |
| Architecture | 32-bit RISC |
| Series | STM32F20x |
| Data Bus Width | 32 bit |
| Mounting Type | Surface mount |
| Mounting Type | Surface mount |
关键差异点
- Exact 120 MHz Cortex-M3 configuration (对比 STM32F217IGH6)
- Dense 176+25 UFBGA integration (对比 STM32F217IGH6)
- Specific orderable configuration (对比 Generic STM32F207 variants)
设计说明
Use the manufacturer package drawing and recommended PCB land pattern for the 176+25 UFBGA rather than adapting a generic BGA footprint. Because the device uses a 10 mm by 10 mm package with dense ball spacing, verify solder-paste volume, stencil aperture design, and assembly tolerances with the selected PCB and assembly capability. Check the exposed thermal and ground-ball requirements against the exact pin-definition table before routing.
Route sensitive clock, communication, and analog-adjacent signals according to the STM32F207IEH6 reference guidance and the complete pin-definition table. Keep switching circuitry and high-current return paths away from precision analog inputs, use continuous return planes where appropriate, and place decoupling and support components directly at their associated pins. Do not infer unused-ball functions from another package or STM32F2 member.
A replacement that fits the board outline is not automatically a drop-in MCU. Before substitution, verify the 176+25 UFBGA ball map, power requirements, clock architecture, boot and reset behavior, peripheral mapping, memory requirements, development-tool support, and firmware initialization. After hardware equivalence is established, compare startup files, linker layouts, interrupt vectors, clock configuration, and driver assumptions between the original and candidate devices.
合规信息
Compliance status was not stated in the product information for this exact MPN. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals documentation with STMicroelectronics for the ordered device.