STM32L031F4P3 - 32MHz, 16KB Flash MCU | STMicroelectronics
MPN: STM32L031F4P3 ✓ NakahandaSTM32L031F4P3 Ulas
A microcontroller such as the STM32L031F4P3 integrates a CPU core, Flash program memory, SRAM, peripheral interfaces, clock circuitry, and power-management functions on one semiconductor device. In the broader hierarchy, it is an embedded microcontroller, part of the ARM Cortex-M family, and specifically an STM32L0 ultra-low-power MCU. The Cortex-M0+ architecture is designed for cost-sensitive, compact embedded control rather than high-performance computing.
Verified product information confirms a 32-bit Cortex-M0+ core, 32 MHz maximum CPU frequency, and 16 KB Flash memory. The 20-TSSOP package keeps the lead count manageable for space-constrained boards while supporting automated assembly. A 3 V operating supply is identified in the distributor result, while detailed electrical limits, SRAM capacity, GPIO count, timer resources, ADC specifications, and current consumption were not supplied in the verified data and require confirmation from the manufacturer datasheet.
Typical design uses include battery-powered sensor nodes, compact industrial controllers, low-power monitoring equipment, simple actuator controllers, and embedded accessory boards. The MCU can execute firmware from its internal Flash and coordinate inputs and outputs through its integrated peripherals. Because peripheral assignments, alternate functions, and electrical characteristics are not included in the supplied records, final PCB and firmware decisions should be based on the STM32L031F4 datasheet and its pin, timing, and power-information sections.
For PCB implementation, preserve the package footprint and pin numbering of the 20-pin TSSOP, route decoupling close to the supply pins, and validate signal levels against the confirmed operating-voltage range. Firmware development should account for the STM32L0 peripheral architecture and low-power modes. This page consolidates the verified distributor and manufacturer information while distinguishing confirmed facts from specifications that still require datasheet verification.
Mga alternatibo na pwedeng ilagay na STM32L031F4P3 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok STM32L031F4P3 (parehas na form factor at footprint) — pagkakaiba sa Flash Memory, Maximum CPU Frequency, Package, CPU Architecture, Operating Voltage Range.
STM32F030F4P6
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →STM32F042F4P6
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
STM32G041F6P6
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →STM32L031F4P3 Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 32-bit ultra-low-power microcontroller |
| Processor Core | ARM Cortex-M0+ |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 16 KB |
| Flash Organization | 16K x 8 |
| Series | STM32L0 |
| Product Line | STM32L031 |
| Volte ng Pagbibigay | 3 V |
| Packhaging | 20-pin TSSOP |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng STM32L031F4P3 20-pin tssop
Pin configuration para sa STM32L031F4P3 (20-pin tssop package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa STM32L031F4P3.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
STM32L031F4P3 ay nararapat para sa 6 aplikasyons: Battery-Powered Sensor Node, Compact Industrial Control Module, Low-Power Monitoring Device, Simple Actuator Controller, Accessory and Configuration Board, Low-Power Consumer Device.
Battery-Powered Sensor Node
STM32L031F4P3 fits a compact sensor node when the design needs a 32-bit ARM Cortex-M0+ controller, 16 KB of internal Flash, and an ultra-low-power MCU family without a large package. The device can manage sensor sampling, local thresholds, and low-frequency status updates while operating from a verified 3 V supply. Its 20-pin TSSOP footprint helps preserve board area in a small enclosure. Before final selection, confirm active and sleep current, wake-up timing, ADC characteristics, and the exact GPIO allocation for the chosen sensors.
Inirekomenda
Compact Industrial Control Module
The STM32L031F4P3 can serve as the control MCU in a compact industrial module that monitors digital inputs, drives discrete outputs, and handles basic sequencing. Its 32 MHz Cortex-M0+ core provides sufficient control bandwidth for low-to-moderate embedded logic, while 16 KB Flash is appropriate for firmware focused on state machines, communication handling, and configuration. The 3 V supply and 20-pin TSSOP package are useful for space-constrained assemblies. Confirm noise immunity, input thresholds, watchdog behavior, and peripheral availability in the manufacturer documentation.
Inirekomenda
Low-Power Monitoring Device
STM32L031F4P3 is appropriate for a standalone monitoring device that periodically reads inputs, evaluates thresholds, records events, and reports status. Its STM32L0 ultra-low-power positioning can help designers target battery-operated equipment, provided the verified sleep and active current figures meet the system budget. The 16 KB Flash capacity constrains local data logging, so applications should use external storage when event histories must be retained. Validate the ADC, comparator, timer, and communication interfaces required by the measurement chain.
Inirekomenda
Simple Actuator Controller
The STM32L031F4P3 can control a simple relay, valve, motor driver input, or indicator circuit when the application requires a compact microcontroller and modest firmware size. Its 32-bit Cortex-M0+ core can execute deterministic control logic, debounce inputs, update outputs, and manage communication commands. The 20-pin TSSOP package keeps routing manageable, although the number and electrical characteristics of usable GPIOs must be verified from the exact pinout. Add appropriate transistor or driver circuitry for loads rather than powering actuators directly from MCU pins.
Inirekomenda
Accessory and Configuration Board
STM32L031F4P3 works as a configuration and accessory controller for systems that need local firmware, status LEDs, button handling, and a communication link. The 16 KB Flash supports a focused embedded application rather than a large graphical or high-end compute workload, while the 32 MHz core provides responsive control behavior. The TSSOP package can simplify assembly when the board is already designed for surface-mount components. Validate boot configuration, programming access, serial interfaces, and unused-pin treatment against the official datasheet.
Inirekomenda
Low-Power Consumer Device
STM32L031F4P3 can be used in a compact consumer device that needs low-power embedded control rather than a high-performance processor. The verified 32 MHz Cortex-M0+ core and 16 KB Flash are suitable for user-interface state handling, simple sensing, and actuator sequencing. The 3 V supply aligns with many low-voltage portable designs, but battery chemistry, regulator efficiency, sleep current, and wake-up behavior remain critical design inputs. Confirm whether the required consumer interfaces and user feedback functions are present before selecting this small-memory MCU.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for STM32L031F4P3 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | STM32F030F4P6 | STM32F042F4P6 | STM32G041F6P6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 20-pin TSSOP | TSSOP-20 | TSSOP-20 | TSSOP-20 |
| Product Positioning | Ultra-low-power STM32L0 MCU | STM32F0 entry-level MCU | Arm Cortex-M0 USB line MCU | Compact STM32G0 MCU |
Pangunahing mga Pagkakaiba
- Low-power STM32L0 positioning (kumpara saSTM32F030F4P6)
- Cortex-M0+ architecture (kumpara saSTM32F042F4P6)
- Compact 32 MHz implementation (kumpara saSTM32F042F4P6)
Talaan ng Disenyo
Use the exact 20-pin TSSOP land pattern from the STM32L031F4 manufacturer package drawing rather than a generic 20-pin footprint. Confirm pin numbering, lead pitch, body width, and courtyard clearance before PCB release. Place the MCU close to its support components and preserve the exposed copper and solderable land requirements shown by the selected package documentation.
Plan the power tree around the verified 3 V supply designation, but obtain the complete minimum and maximum voltage limits from the manufacturer datasheet before selecting regulators or level shifters. Place decoupling capacitors near the supply pins with traces short, low-inductance, and free of unnecessary switching-current paths. Validate startup, brownout, and operating-current requirements across standby and active states.
Do not treat same-package STM32 candidates as automatic drop-in replacements. STM32F030F4P6, STM32F042F4P6, and STM32G041F6P6 appear in comparison data with different product families, clock rates, supply information, or feature descriptions. Check every used pin, alternate function, timer mapping, ADC behavior, clock tree, bootloader assumption, and firmware register difference before substituting one of these parts.
Keep sensitive analog and communication routes away from fast switching edges and noisy power-regulator nodes. Follow the manufacturer recommendations for oscillator, decoupling, and reset routing; no external oscillator arrangement is confirmed by the supplied data. Provide accessible test points for supply, ground, programming, and reset signals so production debugging does not require board rework.
Impormasyon ng Pagsunod sa Kautusan
The supplied verified data does not include RoHS, REACH, lead-free, halogen-free, or conflict-minerals statements. The manufacturer part is an MCU, so AEC-Q100 qualification is not established and is treated as not applicable for this listing.