SY89295UTI - 1024-Tap 3.2-14.8ns Delay Line | Microchip
MPN: SY89295UTI ✓ NakahandaSY89295UTI Ulas
A programmable delay line is a timing semiconductor that delays an incoming logic signal according to a numerical control value. Within the broader clock and timing IC hierarchy, it belongs to the delay-line family and provides a calibrated propagation-delay element for clock alignment, data-path timing compensation, phase adjustment, and test or instrumentation systems. Unlike a general-purpose delay buffer, the SY89295UTI combines 1024 discrete delay taps with a 10 ps increment.
The key operating features include support for 2.5 V or 3.3 V LVPECL operation, a stated maximum operating frequency of 1.5 GHz, and a 3.2 ns to 14.8 ns programmable delay range. A 10-bit parallel control interface selects the required delay position. The compact 32-pin TQFP provides enough external connections for the control bus and high-speed differential inputs and outputs while remaining suitable for automated board assembly.
The architecture is intended to place repeatable, digitally selectable delay directly into a high-speed signal path. Because the delay range is divided into 1024 taps, engineers can express timing offsets at 10 ps resolution. The LVPECL interface is suited to systems that use emitter-coupled logic for high-speed point-to-point signaling. Exact input-output timing accuracy, jitter, control setup requirements, and loading characteristics should be taken from the manufacturer datasheet when establishing a production design.
Typical uses include clock-path phase alignment, data-retiming systems, high-speed test equipment, telecommunications timing modules, and instrumentation requiring calibrated programmable delay. It can also support FPGA or ASIC bring-up work where engineers need to adjust an external timing path without repeatedly changing board delays or cable lengths.
PCB implementation requires careful treatment of the LVPECL interface and the 10-bit digital control bus. Route the high-speed differential paths over a continuous reference plane, keep the delay-line output close to the receiving circuit, and use controlled-impedance layout where the system architecture requires it. Confirm the exact pin assignments, supply requirements, control timing, decoupling recommendations, and unused-pin treatment in the manufacturer pin description before layout release.
This page combines the part identity, programming range, package information, sourcing details, and practical implementation guidance to accelerate component selection. It also distinguishes directly supported drop-in candidates from related package or ordering variants that require separate engineering review.
Mga alternatibo na pwedeng ilagay na SY89295UTI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
SY89295U
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
SY89295UTG
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →SY89295UTI Mga Spesipikasyon
| Product Type | Programmable delay line IC |
| Number of Taps | 1024 taps |
| Programmable Delay Range | 3.2 ns to 14.8 ns |
| Delay Increment | 10 ps per tap |
| Control Interface | 10-bit parallel digital control |
| Logic Family | LVPECL |
| Volte ng Pagbibigay | 2.5 V or 3.3 V |
| Maximum Operating Frequency | 1.5 GHz |
| Packhaging | 32-pin TQFP |
| Uri ng Pagpapasok | Surface mount |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Series | Precision Edge |
| Fungsi | Programmable propagation delay |
| Input Signal | LVPECL differential input |
| Output Signal | LVPECL differential output |
| Programmable Delay to First Tap | 3.2 ns |
Gabay sa Pin Configuration ng SY89295UTI 32-pin tqfp
Pin configuration para sa SY89295UTI (32-pin tqfp package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa SY89295UTI.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
SY89295UTI ay nararapat para sa 6 aplikasyons: High-Speed Clock Phase Alignment, Data-Path Timing Compensation, Telecommunications Timing Modules, FPGA and ASIC Bring-Up, Precision Test and Measurement, High-Speed Interface Characterization.
High-Speed Clock Phase Alignment
The SY89295UTI fits clock-alignment circuits that require a small, digitally controlled correction between two timing paths. Its 1024 taps divide the 3.2 ns to 14.8 ns range into 10 ps increments, allowing an engineer to compensate for board skew or receiver delay without changing cable lengths. The LVPECL interface supports high-speed clock distribution, while the stated 1.5 GHz operating capability addresses demanding edge-rate environments. In implementation, place the device close to the receiving clock domain, route the differential clock over a continuous plane, and validate setup margin, jitter, and control-settling time with the manufacturer timing data.
Inirekomenda
Data-Path Timing Compensation
The SY89295UTI can compensate propagation-delay differences in parallel data paths where deterministic timing adjustment is required before sampling. Its 10 ps tap increment provides substantially finer control than a conventional fixed delay element, and the 3.2 ns minimum delay gives designers room to compensate both interconnect and interface differences. Use the 10-bit parallel control input to select the required offset, observe the associated control setup requirements, and verify that source and destination devices remain within their own timing windows. LVPECL is appropriate when the surrounding system already uses that logic family and the board provides a suitable reference plane.
Inirekomenda
Telecommunications Timing Modules
The SY89295UTI is applicable to telecommunications timing modules that need calibration or phase adjustment of a high-speed serial link. The 1024-tap architecture allows delay to be commanded digitally from 3.2 ns through 14.8 ns, which can support board compensation, deskew, or controlled test insertion. Its LVPECL signaling and 2.5 V or 3.3 V operation suit equipment designed around high-speed differential clocking. The design should account for control-bus skew, output jitter, input-output isolation, and the precision of the reference clock so that adjustment does not consume the link's timing budget.
Inirekomenda
FPGA and ASIC Bring-Up
During FPGA or ASIC bring-up, the SY89295UTI provides an external, digitally adjustable timing element that can isolate board-delay problems from device timing. Engineers can sweep the 1024 available positions in 10 ps increments, compare response against clock or data edges, and identify the compensation required for a prototype board. Its compact 32-pin TQFP preserves routing flexibility on dense digital systems, while the LVPECL interface can connect to suitable test and clock infrastructure. Keep the control interface away from sensitive differential routing, and confirm package pinout and signal integrity using the manufacturer layout guidance.
Inirekomenda
Precision Test and Measurement
The SY89295UTI fits precision test and measurement equipment that requires a repeatable delay setting under digital control. The 10 ps tap increment supports detailed timing calibration, while the 3.2 ns to 14.8 ns range covers applications that need delay inserted rather than removed. The 32-pin TQFP package is practical for automated assembly, and its LVPECL interface can connect to high-speed instrumentation when impedance and terminations are controlled. For laboratory-grade accuracy, evaluate reference-clock stability, control-code resolution, jitter, and temperature effects as separate error sources before specifying the total measurement uncertainty.
Inirekomenda
High-Speed Interface Characterization
The SY89295UTI can be used as a controlled delay element in high-speed interface characterization setups where engineers need to vary timing without changing the physical test fixture. Sweeping the 1024 taps provides a convenient way to locate operating margins, stress receiver timing, or reproduce timing-sensitive behavior. Its 1.5 GHz stated operating capability and LVPECL interface support high-speed laboratory systems. Place the device near the device under test to minimize fixture uncertainty, use short controlled-impedance connections, and record both the programmed tap value and environmental conditions so calibration results remain repeatable across temperature and supply variations.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for SY89295UTI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | SY89295U | SY89295UTG |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-TQFP | 32-TQFP | 32-TQFP |
| Product Type | Programmable delay line IC | Programmable delay line | Programmable delay line |
| Number of Taps | 1024 taps | 1024 taps | 1024 taps |
| Programmable Delay Range | 3.2 ns to 14.8 ns | 3.2 ns to 14.8 ns | 3.2 ns to 14.8 ns |
| Delay Increment | 10 ps per tap | 10 ps per tap | 10 ps per tap |
Pangunahing mga Pagkakaiba
- Fine digital delay adjustment (kumpara saSY89295U)
- Broad programmable timing range (kumpara saSY89295UTG)
- High-speed LVPECL interface (kumpara saSY89295UTG)
Talaan ng Disenyo
Route the LVPECL input and output as a short, continuous differential pair over an uninterrupted reference plane. Place the SY89295UTI close to the receiving device so that connector and trace variation do not consume the calibration range. Use the manufacturer pin-description table and layout guidance for termination, decoupling, and exposed or thermal-pad connections; do not infer connections from the generic TQFP footprint.
The 10 ps tap increment does not remove errors introduced by clock jitter, board skew, control-bus timing, or receiver uncertainty. Establish the complete timing budget and sweep all 1024 control codes during validation. Measure eye closure, input-output delay variation, and control settling across the intended supply and temperature conditions so that the programmed correction remains reliable at system level.
Avoid treating SY89295U, SY89295UTG, and SY89295UTI as automatically interchangeable ordering codes. Verify the suffix-specific package, temperature grade, qualification status, and ordering table before substitution. Also avoid adding external delay to compensate for an incorrect clock-routing topology; first confirm reference-clock quality, source synchronization, and receiver setup requirements.
Impormasyon ng Pagsunod sa Kautusan
Compliance and automotive-qualification declarations are not stated in the available product information. Confirm them with Microchip for the exact SY89295UTI ordering code before production release.