Microchip Technology

SY89295UTI - 1024-Tap 3.2-14.8ns Delay Line | Microchip

料号: SY89295UTI ✓ 量产中
2.5 V or 3.3 V Vdss 32-pin TQFP Package 1.5 GHz Speed
最小起订量: 1 |

SY89295UTI 概述

The Microchip Technology SY89295UTI is a digitally programmable precision delay line IC with 1024 taps, a total propagation-delay range of 3.2 ns to 14.8 ns, and a 10 ps tap increment. It uses LVPECL signaling and is packaged in a surface-mount 32-pin TQFP. The SY89295UTI is designed for high-speed timing applications requiring fine, digitally controlled adjustment of signal propagation time.

A programmable delay line is a timing semiconductor that delays an incoming logic signal according to a numerical control value. Within the broader clock and timing IC hierarchy, it belongs to the delay-line family and provides a calibrated propagation-delay element for clock alignment, data-path timing compensation, phase adjustment, and test or instrumentation systems. Unlike a general-purpose delay buffer, the SY89295UTI combines 1024 discrete delay taps with a 10 ps increment.

The key operating features include support for 2.5 V or 3.3 V LVPECL operation, a stated maximum operating frequency of 1.5 GHz, and a 3.2 ns to 14.8 ns programmable delay range. A 10-bit parallel control interface selects the required delay position. The compact 32-pin TQFP provides enough external connections for the control bus and high-speed differential inputs and outputs while remaining suitable for automated board assembly.

The architecture is intended to place repeatable, digitally selectable delay directly into a high-speed signal path. Because the delay range is divided into 1024 taps, engineers can express timing offsets at 10 ps resolution. The LVPECL interface is suited to systems that use emitter-coupled logic for high-speed point-to-point signaling. Exact input-output timing accuracy, jitter, control setup requirements, and loading characteristics should be taken from the manufacturer datasheet when establishing a production design.

Typical uses include clock-path phase alignment, data-retiming systems, high-speed test equipment, telecommunications timing modules, and instrumentation requiring calibrated programmable delay. It can also support FPGA or ASIC bring-up work where engineers need to adjust an external timing path without repeatedly changing board delays or cable lengths.

PCB implementation requires careful treatment of the LVPECL interface and the 10-bit digital control bus. Route the high-speed differential paths over a continuous reference plane, keep the delay-line output close to the receiving circuit, and use controlled-impedance layout where the system architecture requires it. Confirm the exact pin assignments, supply requirements, control timing, decoupling recommendations, and unused-pin treatment in the manufacturer pin description before layout release.

This page combines the part identity, programming range, package information, sourcing details, and practical implementation guidance to accelerate component selection. It also distinguishes directly supported drop-in candidates from related package or ordering variants that require separate engineering review.

直接替换替代料: SY89295UTI ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

SY89295U

✅ 直接替换
📦 32-TQFP
Base family ordering designation versus the complete SY89295UTI code; delay range and LVPECL architecture match, while suffix-specific qualification requires confirmation

📋 参考替代料(不在目录中)

SY89295UTG

✅ 直接替换
Microchip Technology
📦 32-TQFP
Programmable LVPECL delay line · 1024 taps · 3.2 ns · 14.8 ns · 10 ps · LVPECL · 2.5 V ±5% · 3.3 V ±10%

联系询价

查看数据手册 →

SY89295UTI 规格参数

Product Type Programmable delay line IC
Number of Taps 1024 taps
Programmable Delay Range 3.2 ns to 14.8 ns
Delay Increment 10 ps per tap
Control Interface 10-bit parallel digital control
Logic Family LVPECL
电源电压 2.5 V or 3.3 V
Maximum Operating Frequency 1.5 GHz
封装 32-pin TQFP
安装类型 Surface mount
工作温度范围 -40°C to +85°C
Series Precision Edge
功能 Programmable propagation delay
Input Signal LVPECL differential input
Output Signal LVPECL differential output
Programmable Delay to First Tap 3.2 ns

SY89295UTI 32-pin tqfp 引脚配置指南

SY89295UTI(32-pin tqfp 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。

SY89295UTI 的 32-pin tqfp 封装引脚图

暂无详细引脚数据: SY89295UTI.

请参阅 数据手册 以查看完整引脚配置。

典型应用

SY89295UTI 适用于 6 应用s: High-Speed Clock Phase Alignment, Data-Path Timing Compensation, Telecommunications Timing Modules, FPGA and ASIC Bring-Up, Precision Test and Measurement, High-Speed Interface Characterization.

🌐

High-Speed Clock Phase Alignment

The SY89295UTI fits clock-alignment circuits that require a small, digitally controlled correction between two timing paths. Its 1024 taps divide the 3.2 ns to 14.8 ns range into 10 ps increments, allowing an engineer to compensate for board skew or receiver delay without changing cable lengths. The LVPECL interface supports high-speed clock distribution, while the stated 1.5 GHz operating capability addresses demanding edge-rate environments. In implementation, place the device close to the receiving clock domain, route the differential clock over a continuous plane, and validate setup margin, jitter, and control-settling time with the manufacturer timing data.

🖥️

Data-Path Timing Compensation

The SY89295UTI can compensate propagation-delay differences in parallel data paths where deterministic timing adjustment is required before sampling. Its 10 ps tap increment provides substantially finer control than a conventional fixed delay element, and the 3.2 ns minimum delay gives designers room to compensate both interconnect and interface differences. Use the 10-bit parallel control input to select the required offset, observe the associated control setup requirements, and verify that source and destination devices remain within their own timing windows. LVPECL is appropriate when the surrounding system already uses that logic family and the board provides a suitable reference plane.

🌐

Telecommunications Timing Modules

The SY89295UTI is applicable to telecommunications timing modules that need calibration or phase adjustment of a high-speed serial link. The 1024-tap architecture allows delay to be commanded digitally from 3.2 ns through 14.8 ns, which can support board compensation, deskew, or controlled test insertion. Its LVPECL signaling and 2.5 V or 3.3 V operation suit equipment designed around high-speed differential clocking. The design should account for control-bus skew, output jitter, input-output isolation, and the precision of the reference clock so that adjustment does not consume the link's timing budget.

🧩

FPGA and ASIC Bring-Up

During FPGA or ASIC bring-up, the SY89295UTI provides an external, digitally adjustable timing element that can isolate board-delay problems from device timing. Engineers can sweep the 1024 available positions in 10 ps increments, compare response against clock or data edges, and identify the compensation required for a prototype board. Its compact 32-pin TQFP preserves routing flexibility on dense digital systems, while the LVPECL interface can connect to suitable test and clock infrastructure. Keep the control interface away from sensitive differential routing, and confirm package pinout and signal integrity using the manufacturer layout guidance.

🔧

Precision Test and Measurement

The SY89295UTI fits precision test and measurement equipment that requires a repeatable delay setting under digital control. The 10 ps tap increment supports detailed timing calibration, while the 3.2 ns to 14.8 ns range covers applications that need delay inserted rather than removed. The 32-pin TQFP package is practical for automated assembly, and its LVPECL interface can connect to high-speed instrumentation when impedance and terminations are controlled. For laboratory-grade accuracy, evaluate reference-clock stability, control-code resolution, jitter, and temperature effects as separate error sources before specifying the total measurement uncertainty.

📡

High-Speed Interface Characterization

The SY89295UTI can be used as a controlled delay element in high-speed interface characterization setups where engineers need to vary timing without changing the physical test fixture. Sweeping the 1024 taps provides a convenient way to locate operating margins, stress receiver timing, or reproduce timing-sensitive behavior. Its 1.5 GHz stated operating capability and LVPECL interface support high-speed laboratory systems. Place the device near the device under test to minimize fixture uncertainty, use short controlled-impedance connections, and record both the programmed tap value and environmental conditions so calibration results remain repeatable across temperature and supply variations.

推荐产品汇总

SY89295U Related programmable delay-line family member 用于: High-Speed Clock Phase Alignment, Data-Path Timing Compensation, Telecommunications Timing Modules, FPGA and ASIC Bring-Up, Precision Test and Measurement, High-Speed Interface Characterization SY89295UTG Microchip Technology 用于: High-Speed Clock Phase Alignment, Data-Path Timing Compensation, Telecommunications Timing Modules, FPGA and ASIC Bring-Up, Precision Test and Measurement, High-Speed Interface Characterization
What is the SY89295UTI?
The SY89295UTI is a Microchip Technology precision programmable delay line IC for high-speed LVPECL signal paths. According to the manufacturer product information, it provides 1024 selectable taps across a 3.2 ns to 14.8 ns delay range, with a 10 ps increment, and is packaged in a 32-pin TQFP. Its principal purpose is to add calibrated, digitally selected propagation delay for clock alignment, timing compensation, and test-equipment applications.
What is the operating voltage of SY89295UTI?
The SY89295UTI supports 2.5 V or 3.3 V operation. The manufacturer information identifies the interface as LVPECL and describes the part as a 2.5 V/3.3 V precision programmable delay line. Confirm the exact supply tolerance, rail arrangement, and decoupling requirements in the Microchip SY89295 datasheet before applying either operating condition in a new PCB design.
How many delay taps does the SY89295UTI have?
The SY89295UTI has 1024 programmable delay taps. Its total adjustable range is 3.2 ns to 14.8 ns, and each tap represents a 10 ps delay increment. This permits fine timing adjustments in high-speed signal paths through a 10-bit parallel digital control interface rather than through an analog tuning potentiometer.
What is the delay range and resolution of SY89295UTI?
The SY89295UTI provides a programmable propagation delay from 3.2 ns to 14.8 ns in 10 ps increments. According to the Microchip product description, the delay is selected digitally and spans 1024 taps. The delay range is useful for compensating clock skew, aligning parallel data paths, and calibrating timing in communication and instrumentation systems.
Where to download the SY89295UTI datasheet PDF?
The official SY89295 product page at Microchip is the preferred starting point for the SY89295UTI datasheet, package drawing, pinout, and ordering information. The manufacturer page is https://www.microchip.com/en-us/product/SY89295U. Use the document revision shown on that page for design release, because timing, electrical-characteristics, and package details must be evaluated against the applicable revision.
Where can I find the SY89295UTI pinout?
The SY89295UTI pinout is shown in the Microchip manufacturer datasheet under the pin-description and package-information sections. The device uses a 32-pin TQFP package and includes a 10-bit control interface plus differential LVPECL signal connections. Assign PCB nets directly from the manufacturer pin-description table rather than inferring positions from a generic TQFP drawing.
Where to buy SY89295UTI online?
Use the Request a Quote form on this page to request SY89295UTI availability, current pricing, minimum order quantity, and lead time. The exact ordering code must be confirmed as SY89295UTI because related SY89295 variants may use different packaging or temperature identifiers. XAIPART will quote the requested MPN against the quantity and delivery requirements entered on the form.
What is the price of SY89295UTI?
Current SY89295UTI pricing depends on quantity, sourcing condition, and requested delivery schedule. Submit the part number and target quantity through the Request a Quote form on this page to obtain a current quotation. The form is also the appropriate route for checking volume pricing and any production-lead-time constraints without relying on a stale list price.
What is the lead time for SY89295UTI?
The current lead time for SY89295UTI should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, production schedule, packaging requirement, and shipment destination. Enter the exact MPN, annual usage, and required delivery date so the commercial response can reflect the actual manufacturing and logistics conditions.
Is SY89295UTI in stock?
Use the Request a Quote form on this page to request the current SY89295UTI stock position and shipment plan. The form accepts the exact MPN and quantity needed for evaluation, including production planning quantities. This avoids treating a distributor search result as a live inventory guarantee and helps identify the appropriate schedule for the requested order.
SY89295UTI vs SY89295U - which is better for a new design?
The SY89295UTI is the fully specified ordering code for a 32-pin TQFP version, while SY89295U is the base Microchip product designation shown by the manufacturer. Both refer to the same programmable delay-line family and share the 1024-tap, 3.2 ns to 14.8 ns concept. Choose the ordering suffix that matches the required package and temperature grade, and confirm its complete part number before release.
When should I choose SY89295UTI instead of SY89295UTG?
Choose SY89295UTI when the exact orderable 32-pin TQFP configuration and its associated temperature grade are required by the design. SY89295UTG is a related ordering suffix shown in comparison listings, but its qualification and orderable details are not fully established by the available product information. Verify the manufacturer's ordering table and compare the suffix-specific specifications before selecting between them.
What is the best drop-in replacement for SY89295UTI?
No fully verified five-part drop-in replacement set is established for the SY89295UTI from the available cross-reference information. The closest related manufacturer candidates are SY89295U and SY89295UTG, but pin-level compatibility, temperature grade, and complete electrical equivalence must be confirmed in the manufacturer datasheet. Treat them as review candidates rather than unqualified replacements until the ordering and pin tables match.
Can SY89295U replace SY89295UTI?
SY89295U may share the core programmable delay architecture, but it is the base family designation rather than the complete SY89295UTI ordering code. A valid replacement requires matching the 32-pin TQFP footprint, LVPECL electrical characteristics, 10-bit control interface, temperature grade, and package tolerances. Check the Microchip ordering information before assigning SY89295U as a drop-in replacement.
What can replace SY89295UTI?
The primary replacement path is a manufacturer-identical or equivalent 32-pin TQFP programmable delay line with the same 1024-tap control organization and compatible LVPECL interface. SY89295U and SY89295UTG are the closest reviewed related MPNs, but no substitute should be approved from the suffix alone. Compare the pin description, delay limits, control setup timing, supply levels, temperature range, and package dimensions first.
Is SY89295UTI suitable for high-speed clock alignment?
Yes, the SY89295UTI is suitable for high-speed clock alignment when its 1.5 GHz stated operating capability and 3.2 ns to 14.8 ns LVPECL delay range meet the system requirements. The 10 ps tap increment allows fine phase corrections, but board skew, receiver tolerance, jitter, and control timing must also remain within the end-to-end budget. Use the manufacturer timing diagrams for final sign-off.
What are the key specifications of SY89295UTI that engineers should know?
The key SY89295UTI specifications are 1024 programmable taps, a 3.2 ns to 14.8 ns total delay range, a 10 ps tap increment, 2.5 V or 3.3 V LVPECL operation, and a stated maximum operating frequency of 1.5 GHz. The device is offered in a surface-mount 32-pin TQFP with a 10-bit parallel control interface. These parameters establish its core timing, interface, control, and footprint capabilities.

工程参考数据: SY89295UTI ——对比、设计指导和合规信息。

选型指南

Choose the SY89295UTI when a design requires a 1024-tap programmable delay element with 10 ps resolution, a 3.2 ns to 14.8 ns range, and a 2.5 V or 3.3 V LVPECL interface in a 32-pin TQFP. It is well suited to clock deskew, data-path compensation, FPGA or ASIC bring-up, and precision test systems. Review SY89295U when searching the broader Microchip family or when the base product designation matches the required ordering configuration. Review SY89295UTG only after confirming its suffix-specific package, temperature grade, and electrical limits. Neither related designation should be approved as a drop-in replacement solely from the family name. For a new layout, use the exact manufacturer pinout and package drawing; for a redesign, confirm that the programmed delay range, control protocol, supply arrangement, and LVPECL interface remain unchanged.

与替代料对比

参数 本产品 SY89295U SY89295UTG
Brand Microchip Technology Microchip Technology Microchip Technology
Package 32-TQFP 32-TQFP 32-TQFP
Product Type Programmable delay line IC Programmable delay line Programmable delay line
Number of Taps 1024 taps 1024 taps 1024 taps
Programmable Delay Range 3.2 ns to 14.8 ns 3.2 ns to 14.8 ns 3.2 ns to 14.8 ns
Delay Increment 10 ps per tap 10 ps per tap 10 ps per tap

关键差异点

  • Fine digital delay adjustment (对比 SY89295U)
  • Broad programmable timing range (对比 SY89295UTG)
  • High-speed LVPECL interface (对比 SY89295UTG)

设计说明

Route the LVPECL input and output as a short, continuous differential pair over an uninterrupted reference plane. Place the SY89295UTI close to the receiving device so that connector and trace variation do not consume the calibration range. Use the manufacturer pin-description table and layout guidance for termination, decoupling, and exposed or thermal-pad connections; do not infer connections from the generic TQFP footprint.

The 10 ps tap increment does not remove errors introduced by clock jitter, board skew, control-bus timing, or receiver uncertainty. Establish the complete timing budget and sweep all 1024 control codes during validation. Measure eye closure, input-output delay variation, and control settling across the intended supply and temperature conditions so that the programmed correction remains reliable at system level.

Avoid treating SY89295U, SY89295UTG, and SY89295UTI as automatically interchangeable ordering codes. Verify the suffix-specific package, temperature grade, qualification status, and ordering table before substitution. Also avoid adding external delay to compensate for an incorrect clock-routing topology; first confirm reference-clock quality, source synchronization, and receiver setup requirements.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

Compliance and automotive-qualification declarations are not stated in the available product information. Confirm them with Microchip for the exact SY89295UTI ordering code before production release.

相关搜索

SY89295UTI datasheet SY89295UTI pinout SY89295UTI datasheet pdf SY89295UTI equivalent SY89295UTI replacement SY89295UTI cross reference SY89295UTI vs SY89295U SY89295UTI footprint Microchip SY89295UTI SY89295UTI 1024 tap delay line SY89295UTI LVPECL delay line SY89295UTI 3.2ns 14.8ns SY89295UTI price SY89295UTI stock SY89295UTI application circuit

相关元器件 & 术语

Microchip Technology SY89295UTI SY89295U SY89295UTG programmable delay line delay line IC clock and timing IC timing semiconductor LVPECL low-voltage positive emitter-coupled logic 10-bit parallel control 1024 taps 10 ps tap increment 3.2 ns minimum delay 14.8 ns maximum delay 1.5 GHz 32-TQFP TQFP family surface mount SMD clock phase alignment data-path timing compensation FPGA bring-up precision test equipment RoHS REACH
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情