Microchip Technology

SY89827LHI - 500 MHz 4:20 HSTL Clock Buffer | Microchip

MPN: SY89827LHI ✓ Nakahanda
3.3 V Vdss 64-lead TQFP with exposed pad Package 500 MHz Speed
MOQ: 1 |

SY89827LHI Ulas

Microchip Technology SY89827LHI is a high-performance dual 1:10 HSTL clock fanout buffer and translator with a 2:1 multiplexer input, operating up to 500 MHz in a 64-lead TQFP exposed-pad package. The device supports configurable 4:20 or 2:10 fanout, accepts dual LVPECL or HSTL inputs, and provides ten differential 1.5 V HSTL-compatible outputs.

A clock fanout buffer is a clock-management integrated circuit that distributes one or more high-speed clock signals to multiple destinations while controlling impedance, fanout, and timing relationships. Clock translators add level conversion between input and output logic standards. Within the broader semiconductor hierarchy, the SY89827LHI belongs to the clock and timing IC family, where it supports processor, memory, networking, and communications systems requiring many synchronized clock loads.

The principal features of the SY89827LHI include support for frequencies up to 500 MHz, a flexible 4:20 or 2:10 configuration, dual LVPECL or HSTL input capability, and ten differential HSTL-compatible outputs. Its extremely low output skew is specified below 50 ps over temperature and voltage, making it suitable for demanding high-speed systems in which clock arrival differences must remain small.

The 64-TQFP exposed-pad construction consolidates twenty single-ended output positions, or ten differential outputs, into one space-saving package. Differential signaling reduces sensitivity to common-mode noise and board-level timing uncertainty, while the exposed pad provides a direct thermal path for distributing dissipation from the clock-driver circuitry.

Typical uses include CPU and memory clock distribution, telecommunications equipment, network-interface clock trees, data-conversion systems, and other PCI-style or high-speed digital platforms. The device can operate as two channels with ten outputs each or as one channel with twenty outputs, allowing system architects to consolidate clock routing while preserving configurable distribution.

When laying out a board around the SY89827LHI, use controlled-impedance routing for every differential clock path and match output-to-output trace geometry where practical. Keep the exposed-pad thermal connection unobstructed, follow the manufacturer’s input and output termination requirements, and validate return loss and differential skew on the assembled PCB.

This page consolidates the clock ratios, logic levels, frequency capability, package characteristics, application guidance, and practical comparison considerations needed to evaluate the SY89827LHI before it enters a high-speed clock-distribution design.

Mga alternatibo na pwedeng ilagay na SY89827LHI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

SY89827LHI Mga Spesipikasyon

Device Type Clock fanout buffer, multiplexer, and translator
Maksimum na Taktiko ng Oras 500 MHz
Volte ng Pagbibigay 3.3 V
Input Logic Levels Dual LVPECL or HSTL
Output Logic Levels 1.5 V HSTL-compatible differential
Supported Fanout Configuration 4:20 or 2:10
Differential Output Count 10 outputs
Single-Ended Output Count 20 outputs
Output Skew <50 ps over temperature and voltage
Packhaging 64-lead TQFP with exposed pad
Bilang ng Pin 64 pins
Uri ng Pagpapasok Surface mount
Tindminan RoHS unknown
REACH Status unknown
AEC-Q100 Qualification unknown
Lead-Free Status unknown

Gabay sa Pin Configuration ng SY89827LHI 64-lead tqfp with exposed pad

Pin configuration para sa SY89827LHI (64-lead tqfp with exposed pad package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 64-lead tqfp with exposed pad package para sa SY89827LHI

Wala ng detalyadong pinout data na magagamit para sa SY89827LHI.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

SY89827LHI ay nararapat para sa 6 aplikasyons: CPU and Memory Clock Distribution, Telecommunications Backplane Distribution, Network Interface Clock Trees, PCI-Style Parallel Interface Timing, High-Speed Data Converter Clocks, Server and Storage System Clocks.

🖥️

CPU and Memory Clock Distribution

The SY89827LHI fits CPU and memory clock trees that require one source signal to feed many closely timed loads. Its configurable 4:20 and 2:10 organization provides twenty single-ended or ten differential outputs, while the less-than-50 ps skew specification supports coherent clock arrival across temperature and voltage. The 64-lead TQFP exposed-pad package also consolidates a large fanout network into one component. In a 3.3 V system, the device can accept LVPECL or HSTL source clocks and drive differential 1.5 V HSTL-compatible loads, provided the board follows the specified terminations and uses controlled-impedance routing.

🌐

Telecommunications Backplane Distribution

The SY89827LHI is suitable for telecommunications backplanes that distribute a common reference clock to multiple line cards, converters, or interface circuits. Twenty configurable outputs let a designer distribute one clock widely, while dual-channel operation can serve two related clock domains. Its 500 MHz capability covers high-speed backplane and serial-interface infrastructure, and differential HSTL-compatible outputs help control common-mode noise sensitivity. The principal design constraints are matched trace geometry, correct input and output termination, and verification of return loss and timing margin across the assembled backplane.

🌐

Network Interface Clock Trees

The SY89827LHI can support network-interface clock trees requiring repeatable delivery of a high-frequency differential clock to multiple serializers, transceivers, or fabric components. Ten differential outputs reduce the number of separate distribution stages and help constrain skew between destinations. Operation up to 500 MHz makes the device relevant for high-speed line cards, while LVPECL or HSTL input selection allows integration with different clock-generation standards. Designers should preserve source symmetry, maintain controlled differential impedance, and validate crosstalk and jitter at each receiver rather than relying only on device-level output specifications.

🔧

PCI-Style Parallel Interface Timing

The SY89827LHI fits parallel PCI-style interfaces where a source clock must reach multiple endpoints with tightly controlled timing. Twenty single-ended or ten differential outputs allow one clock driver to serve several loads, and the less-than-50 ps skew specification supports tighter endpoint-to-endpoint alignment than a loosely buffered distribution network. LVPECL or HSTL source compatibility provides integration flexibility across legacy and mixed clock domains. For reliable implementation, follow the recommended resistor networks, provide continuous return paths, and verify timing on the finished multilayer board because package and connector loading can influence edge behavior.

📺

High-Speed Data Converter Clocks

The SY89827LHI can distribute sampling or reference clocks to parallel and high-speed data-converter channels. Its 500 MHz maximum frequency and differential HSTL-compatible outputs provide a practical basis for multi-channel synchronization, while configurable 4:20 or 2:10 operation supports systems with different channel counts. The low-skew characteristic helps retain alignment among converter sampling events. The design should use short, symmetric routes, isolate clocks from noisy switching paths, and verify jitter, lane-to-lane skew, and output settling under the actual clock pattern before releasing the layout for production.

🖥️

Server and Storage System Clocks

The SY89827LHI is applicable in server and storage systems where a local clock must reach several high-speed functional blocks on a dense board. Twenty outputs provide extensive fanout from a single 64-lead TQFP device, helping reduce clock-tree complexity and the number of cascaded buffers. Differential outputs support controlled-impedance routing and improved noise immunity in systems containing fast processors and storage links. Because server boards combine high switching activity with tight timing constraints, place the driver away from noisy power stages, use a solid ground reference, and assess power-supply coupling and clock-jitter performance in the assembled system.

What is the SY89827LHI?
The SY89827LHI is a 500 MHz dual clock fanout buffer, translator, and 2:1 multiplexer in a 64-lead TQFP exposed-pad package. According to the manufacturer datasheet, it accepts dual LVPECL or HSTL inputs and provides ten differential 1.5 V HSTL-compatible outputs. It can be configured as two 1:10 channels or one 1:20 channel, making it useful for high-speed clock trees requiring numerous outputs and limited skew.
What clock frequencies does the SY89827LHI support?
The SY89827LHI supports clock frequencies up to 500 MHz. The manufacturer datasheet identifies the part as a dual 1:10 HSTL fanout buffer and translator with a 2:1 multiplexer input. Its specified output skew remains below 50 ps over temperature and voltage, providing timing margin in systems where a single source clock must feed many high-speed loads.
What are the input and output logic levels of SY89827LHI?
The SY89827LHI accepts dual LVPECL or HSTL inputs and produces ten differential 1.5 V HSTL-compatible outputs. According to the manufacturer datasheet, the input stage supports two selectable logic families, while the output stage is optimized for HSTL-compatible clock distribution. Board design must also follow the specified source and load termination arrangements to maintain signal integrity.
Can SY89827LHI operate in both 4:20 and 2:10 modes?
Yes, the SY89827LHI supports configurable 4:20 and 2:10 clock distribution modes. The manufacturer datasheet describes a dual-channel implementation with ten outputs per channel or a single-channel implementation with twenty outputs. This flexibility lets a system use the same device for two independent clock trees or combine the resources for one higher-fanout distribution network.
Where can I download the SY89827LHI datasheet PDF?
The SY89827LHI datasheet PDF is available at https://pdf.digi-electronics.com/pdf/2190/SY89827LHI-datasheet.pdf. The document describes the 500 MHz dual 1:10 HSTL fanout buffer and translator, its 2:1 multiplexer input, ten differential outputs, configurable operating modes, and the less-than-50 ps skew characteristic. Use the pin-description and recommended application sections for board-level implementation.
Where is the SY89827LHI pinout and package information?
The SY89827LHI uses a 64-lead TQFP package with an exposed pad. Its complete numbered pin assignment is presented in the manufacturer datasheet rather than reproduced on this page. During schematic capture, use the datasheet pin-description table to identify power, ground, clock inputs, control pins, and the twenty differential-output positions, then cross-check every connection against the package drawing.
What is the best drop-in replacement for SY89827LHI?
No verified drop-in replacement for the SY89827LHI has been identified. A replacement must match the 64-lead TQFP exposed-pad footprint, pin assignments, 3.3 V supply, LVPECL or HSTL input support, 2:1 multiplexing, 500 MHz operating capability, and 4:20 or 2:10 output organization. A functionally similar clock driver is not automatically interchangeable, so request manufacturer compatibility confirmation before approving a substitution.
Can SY89824L replace the SY89827LHI?
The SY89824L is not established as a pin-compatible drop-in replacement for the SY89827LHI. The manufacturer documentation recommends the SY89824L when greater HSTL fanout capability is required, which indicates a different capacity or application focus. Pin assignments, output count, multiplexing behavior, and termination requirements must be compared before considering it for an existing SY89827LHI board.
What can replace the SY89827LHI in a clock tree?
A direct replacement must preserve the SY89827LHI’s 64-lead TQFP footprint, pin-to-pin function, 3.3 V operation, LVPECL or HSTL input capability, 500 MHz maximum frequency, and 4:20 or 2:10 output modes. No such replacement is confirmed by the available manufacturer and cross-reference information. For sourcing, use the Request a Quote form on this page and require written pin-compatibility and timing validation.
Is the SY89827LHI the same as a competing 20-output clock driver?
No automatic equivalence can be established from the device type and output count alone. A competing 20-output clock driver may use a different package, power supply, input thresholds, multiplexing scheme, output termination, or pin arrangement. According to the manufacturer datasheet, the SY89827LHI also maintains less-than-50 ps skew over temperature and voltage. A valid substitution requires full electrical and pin-level comparison.
SY89827LHI versus SY89824L: which is better for high fanout?
Choose the SY89824L when the design specifically requires greater HSTL fanout capability, as directed by the manufacturer documentation. Choose the SY89827LHI when its configurable 4:20 or 2:10 organization, dual LVPECL or HSTL inputs, ten differential HSTL outputs, and less-than-50 ps skew meet the clock-tree requirements. The SY89824L is a different device and should not be treated as a drop-in substitute.
When should I choose the SY89827LHI over another clock buffer?
Choose the SY89827LHI when the design needs up to 500 MHz operation, twenty single-ended or ten differential outputs, selectable 4:20 or 2:10 distribution, and input support for either LVPECL or HSTL. It is particularly suitable when many closely timed clock loads must be served from one 64-lead TQFP device. Choose another buffer when its pinout, supply architecture, output standard, or fanout organization better matches the board.
Is the SY89827LHI suitable for a high-speed memory clock tree?
The SY89827LHI can suit a high-speed memory clock tree when the required interface uses compatible LVPECL or HSTL clocking and the system can meet its 3.3 V supply and termination requirements. Its twenty single-ended or ten differential outputs support substantial fanout, while the specified skew below 50 ps is valuable when multiple loads must operate coherently. Validate edge rate, return loss, and board-level timing.
How much thermal design is required for the SY89827LHI?
The SY89827LHI’s exposed pad provides the intended thermal path, so the PCB must include a properly connected thermal-via and copper-plane arrangement. Exact power dissipation and junction-temperature limits are not stated in the product summary and must be taken from the manufacturer datasheet under the intended supply voltage, output termination, clock activity, and ambient temperature. Avoid relying on a thermal value from another package variant.
What are the key specifications of SY89827LHI that engineers should know?
The SY89827LHI is a 3.3 V clock fanout buffer and translator rated to 500 MHz, with dual LVPECL or HSTL inputs, ten differential 1.5 V HSTL-compatible outputs, and configurable 4:20 or 2:10 organization. According to the manufacturer datasheet, its output skew is below 50 ps over temperature and voltage. It is supplied in a 64-lead TQFP exposed-pad package for surface-mount clock-tree implementations.
Where can I buy SY89827LHI and what is its lead time?
Use the Request a Quote form on this page to request current SY89827LHI availability, minimum order quantity, and lead time for your required quantity and packaging. The manufacturer documentation describes the part as a 64-lead TQFP exposed-pad clock buffer, but a quotation is required for current commercial terms and delivery scheduling. Provide the target quantity and assembly packaging in the request.

Impormasyon ng Talumpati sa Engineering for SY89827LHI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the SY89827LHI when a high-speed design needs a 3.3 V clock driver that accepts dual LVPECL or HSTL inputs and distributes them through ten differential 1.5 V HSTL-compatible outputs. Its configurable 4:20 or 2:10 organization is particularly useful for consolidating many clock loads into a 64-lead TQFP exposed-pad package, while its less-than-50 ps skew specification supports closely synchronized endpoints. Select the SY89824L only when the manufacturer’s greater HSTL fanout capability is required; it is not confirmed as a pin-compatible substitute. For other competitors, require the same package footprint, pin assignments, supply voltage, input thresholds, output standard, termination scheme, multiplexing behavior, and timing performance. A clock driver that is only functionally similar should not be used in an existing PCB without complete electrical and signal-integrity validation.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Microchip Technology
Package 64-lead TQFP with exposed pad
Device Type Clock fanout buffer, multiplexer, and translator
Maximum Frequency 500 MHz
Supply Voltage 3.3 V
Input Logic Dual LVPECL or HSTL
Output Logic 1.5 V HSTL-compatible differential
Fanout Configuration 4:20 or 2:10
Differential Outputs 10 outputs
Output Skew <50 ps over temperature and voltage
Input Multiplexing 2:1 multiplexer input
Mounting Type Surface mount

Pangunahing mga Pagkakaiba

  • Configurable output organization consolidates multiple clock-tree functions (kumpara saSY89824L)
  • Wide input-format flexibility (kumpara saGeneric single-logic clock buffer)
  • High operating frequency with constrained output skew (kumpara saLower-frequency fanout buffer)

Talaan ng Disenyo

Route every differential clock output as a controlled-impedance pair with closely matched length and geometry. Avoid crossing plane splits, suppressing vias, and stubs that can create reflections. Place the SY89827LHI near the clock-consuming devices when practical, and observe the manufacturer’s input and output termination arrangements because incorrect resistor placement can alter edge rate, duty-cycle distortion, and channel-to-channel skew.

Use the exposed pad as a functional thermal connection by placing vias beneath or adjacent to it and connecting those vias to a suitable ground plane region. Keep the area free of restrictive keepouts. The required pad geometry, copper area, and via pattern should follow the manufacturer’s land-pattern guidance. Review actual clock activity and termination power dissipation under maximum operating frequency because a low-duty-cycle bench test may not represent continuous operation.

Validate return loss, differential skew, jitter, and crosstalk on the assembled PCB rather than inferring performance from the <50 ps device skew alone. Keep the clock away from high-current switching nodes, provide a continuous reference plane, and use symmetric source and load terminations. Test the maximum clock frequency and the expected load population, because output loading, connector parasitics, and PCB loss can materially change the edge seen by each receiver.

Do not treat the SY89824L as a drop-in replacement merely because it is related to the SY89827L family. The manufacturer recommends the SY89824L for greater HSTL fanout, which can indicate a different output organization or electrical design. Before substituting any clock driver, compare every pin, the power rails, input thresholds, output termination, multiplexing mode, exposed-pad connection, and timing specifications.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this part.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

SY89827LHI datasheet SY89827LHI datasheet pdf SY89827LHI pinout SY89827LHI specifications SY89827LHI equivalent SY89827LHI replacement SY89827LHI cross reference SY89827LHI vs SY89824L SY89827LHI 500 MHz clock buffer SY89827LHI 64 TQFP footprint SY89827LHI HSTL application circuit SY89827LHI price SY89827LHI stock Microchip SY89827LHI

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology SY89827LHI SY89824L clock fanout buffer clock translator clock multiplexer clock management IC timing IC integrated circuit semiconductor LVPECL HSTL 2:1 multiplexer 4:20 fanout 2:10 fanout 500 MHz less-than-50 ps skew 3.3 V supply 1.5 V HSTL-compatible output 64-lead TQFP TQFP exposed-pad package surface-mount package differential clock high-speed clock tree telecommunications backplane
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ