SY89827LHI - 500 MHz 4:20 HSTL Clock Buffer | Microchip
MPN: SY89827LHI ✓ Hoạt độngSY89827LHI Tóm tắt
A clock fanout buffer is a clock-management integrated circuit that distributes one or more high-speed clock signals to multiple destinations while controlling impedance, fanout, and timing relationships. Clock translators add level conversion between input and output logic standards. Within the broader semiconductor hierarchy, the SY89827LHI belongs to the clock and timing IC family, where it supports processor, memory, networking, and communications systems requiring many synchronized clock loads.
The principal features of the SY89827LHI include support for frequencies up to 500 MHz, a flexible 4:20 or 2:10 configuration, dual LVPECL or HSTL input capability, and ten differential HSTL-compatible outputs. Its extremely low output skew is specified below 50 ps over temperature and voltage, making it suitable for demanding high-speed systems in which clock arrival differences must remain small.
The 64-TQFP exposed-pad construction consolidates twenty single-ended output positions, or ten differential outputs, into one space-saving package. Differential signaling reduces sensitivity to common-mode noise and board-level timing uncertainty, while the exposed pad provides a direct thermal path for distributing dissipation from the clock-driver circuitry.
Typical uses include CPU and memory clock distribution, telecommunications equipment, network-interface clock trees, data-conversion systems, and other PCI-style or high-speed digital platforms. The device can operate as two channels with ten outputs each or as one channel with twenty outputs, allowing system architects to consolidate clock routing while preserving configurable distribution.
When laying out a board around the SY89827LHI, use controlled-impedance routing for every differential clock path and match output-to-output trace geometry where practical. Keep the exposed-pad thermal connection unobstructed, follow the manufacturer’s input and output termination requirements, and validate return loss and differential skew on the assembled PCB.
This page consolidates the clock ratios, logic levels, frequency capability, package characteristics, application guidance, and practical comparison considerations needed to evaluate the SY89827LHI before it enters a high-speed clock-distribution design.
Bộ thay thế dễ dàng lắp đặt cho SY89827LHI — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếSY89827LHI Thông số kỹ thuật
| Device Type | Clock fanout buffer, multiplexer, and translator |
| Tần số xung maksimum | 500 MHz |
| Điện áp cung cấp | 3.3 V |
| Input Logic Levels | Dual LVPECL or HSTL |
| Output Logic Levels | 1.5 V HSTL-compatible differential |
| Supported Fanout Configuration | 4:20 or 2:10 |
| Differential Output Count | 10 outputs |
| Single-Ended Output Count | 20 outputs |
| Output Skew | <50 ps over temperature and voltage |
| Hộp | 64-lead TQFP with exposed pad |
| Số chân | 64 pins |
| Kiểu lắp đặt | Surface mount |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | unknown |
| Lead-Free Status | unknown |
Hướng dẫn cấu hình chân SY89827LHI 64-lead tqfp with exposed pad
Cấu hình chân cho SY89827LHI (64-lead tqfp with exposed pad gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho SY89827LHI.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
SY89827LHI phù hợp cho 6 Áp dụngs: CPU and Memory Clock Distribution, Telecommunications Backplane Distribution, Network Interface Clock Trees, PCI-Style Parallel Interface Timing, High-Speed Data Converter Clocks, Server and Storage System Clocks.
CPU and Memory Clock Distribution
The SY89827LHI fits CPU and memory clock trees that require one source signal to feed many closely timed loads. Its configurable 4:20 and 2:10 organization provides twenty single-ended or ten differential outputs, while the less-than-50 ps skew specification supports coherent clock arrival across temperature and voltage. The 64-lead TQFP exposed-pad package also consolidates a large fanout network into one component. In a 3.3 V system, the device can accept LVPECL or HSTL source clocks and drive differential 1.5 V HSTL-compatible loads, provided the board follows the specified terminations and uses controlled-impedance routing.
Telecommunications Backplane Distribution
The SY89827LHI is suitable for telecommunications backplanes that distribute a common reference clock to multiple line cards, converters, or interface circuits. Twenty configurable outputs let a designer distribute one clock widely, while dual-channel operation can serve two related clock domains. Its 500 MHz capability covers high-speed backplane and serial-interface infrastructure, and differential HSTL-compatible outputs help control common-mode noise sensitivity. The principal design constraints are matched trace geometry, correct input and output termination, and verification of return loss and timing margin across the assembled backplane.
Network Interface Clock Trees
The SY89827LHI can support network-interface clock trees requiring repeatable delivery of a high-frequency differential clock to multiple serializers, transceivers, or fabric components. Ten differential outputs reduce the number of separate distribution stages and help constrain skew between destinations. Operation up to 500 MHz makes the device relevant for high-speed line cards, while LVPECL or HSTL input selection allows integration with different clock-generation standards. Designers should preserve source symmetry, maintain controlled differential impedance, and validate crosstalk and jitter at each receiver rather than relying only on device-level output specifications.
PCI-Style Parallel Interface Timing
The SY89827LHI fits parallel PCI-style interfaces where a source clock must reach multiple endpoints with tightly controlled timing. Twenty single-ended or ten differential outputs allow one clock driver to serve several loads, and the less-than-50 ps skew specification supports tighter endpoint-to-endpoint alignment than a loosely buffered distribution network. LVPECL or HSTL source compatibility provides integration flexibility across legacy and mixed clock domains. For reliable implementation, follow the recommended resistor networks, provide continuous return paths, and verify timing on the finished multilayer board because package and connector loading can influence edge behavior.
High-Speed Data Converter Clocks
The SY89827LHI can distribute sampling or reference clocks to parallel and high-speed data-converter channels. Its 500 MHz maximum frequency and differential HSTL-compatible outputs provide a practical basis for multi-channel synchronization, while configurable 4:20 or 2:10 operation supports systems with different channel counts. The low-skew characteristic helps retain alignment among converter sampling events. The design should use short, symmetric routes, isolate clocks from noisy switching paths, and verify jitter, lane-to-lane skew, and output settling under the actual clock pattern before releasing the layout for production.
Server and Storage System Clocks
The SY89827LHI is applicable in server and storage systems where a local clock must reach several high-speed functional blocks on a dense board. Twenty outputs provide extensive fanout from a single 64-lead TQFP device, helping reduce clock-tree complexity and the number of cascaded buffers. Differential outputs support controlled-impedance routing and improved noise immunity in systems containing fast processors and storage links. Because server boards combine high switching activity with tight timing constraints, place the driver away from noisy power stages, use a solid ground reference, and assess power-supply coupling and clock-jitter performance in the assembled system.
Dữ liệu tham khảo kỹ thuật cho SY89827LHI — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Microchip Technology |
| Package | 64-lead TQFP with exposed pad |
| Device Type | Clock fanout buffer, multiplexer, and translator |
| Maximum Frequency | 500 MHz |
| Supply Voltage | 3.3 V |
| Input Logic | Dual LVPECL or HSTL |
| Output Logic | 1.5 V HSTL-compatible differential |
| Fanout Configuration | 4:20 or 2:10 |
| Differential Outputs | 10 outputs |
| Output Skew | <50 ps over temperature and voltage |
| Input Multiplexing | 2:1 multiplexer input |
| Mounting Type | Surface mount |
Bảo phân biệt quan trọng
- Configurable output organization consolidates multiple clock-tree functions (vsSY89824L)
- Wide input-format flexibility (vsGeneric single-logic clock buffer)
- High operating frequency with constrained output skew (vsLower-frequency fanout buffer)
Ghi chú thiết kế
Route every differential clock output as a controlled-impedance pair with closely matched length and geometry. Avoid crossing plane splits, suppressing vias, and stubs that can create reflections. Place the SY89827LHI near the clock-consuming devices when practical, and observe the manufacturer’s input and output termination arrangements because incorrect resistor placement can alter edge rate, duty-cycle distortion, and channel-to-channel skew.
Use the exposed pad as a functional thermal connection by placing vias beneath or adjacent to it and connecting those vias to a suitable ground plane region. Keep the area free of restrictive keepouts. The required pad geometry, copper area, and via pattern should follow the manufacturer’s land-pattern guidance. Review actual clock activity and termination power dissipation under maximum operating frequency because a low-duty-cycle bench test may not represent continuous operation.
Validate return loss, differential skew, jitter, and crosstalk on the assembled PCB rather than inferring performance from the <50 ps device skew alone. Keep the clock away from high-current switching nodes, provide a continuous reference plane, and use symmetric source and load terminations. Test the maximum clock frequency and the expected load population, because output loading, connector parasitics, and PCB loss can materially change the edge seen by each receiver.
Do not treat the SY89824L as a drop-in replacement merely because it is related to the SY89827L family. The manufacturer recommends the SY89824L for greater HSTL fanout, which can indicate a different output organization or electrical design. Before substituting any clock driver, compare every pin, the power rails, input thresholds, output termination, multiplexing mode, exposed-pad connection, and timing specifications.
Thông tin tuân thủ
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statements were identified for this part.