PABALIKANG MAGBILI NG IKAKATUWID: TJA1041AT/V ay papalapit sa katapusan ng buhay. Huling pagsugod ng order: Magkontak sa amin. Tingnan ang mga magagamit na alternatibong bahagi →
NXP Semiconductors

TJA1041AT/V - 1Mbit/s High-Speed CAN Transceiver | NXP

MPN: TJA1041AT/V ✗ Tapus ng Buhay
4.75 V Vdss 14-pin SO surface-mount package Package
MOQ: 1 |

TJA1041AT/V Ulas

The NXP Semiconductors TJA1041AT/V is a high-speed CAN transceiver designed for automotive Controller Area Network nodes operating at data rates up to 1 Mbit/s. It provides differential transmit and receive capabilities between a CAN protocol controller and the physical CAN bus, operates from a 4.75 V to 5.25 V supply, and is offered in a 14-pin SO package. The device is intended for automotive electronic control units, body modules, instrumentation systems, and other embedded networking equipment that require a robust interface between a digital CAN controller and a differential bus.

A CAN transceiver is an interface IC within the broader Controller Area Network hierarchy. A CAN controller generates and interprets digital protocol frames, while the physical-layer transceiver converts controller signals into a differential CAN bus waveform and converts received bus levels back into logic-compatible receive data. The TJA1041AT/V therefore belongs to the CAN transceiver family, which operates at the physical-bus layer beneath communication controllers, embedded processors, and complete automotive electronic control units.

Key operating features include support for high-speed CAN communication up to 1 Mbit/s, a 4.75 V minimum operating supply, a 5.25 V maximum operating supply, differential bus transmission, and differential bus reception. Its transceiver architecture allows a host controller to remain separate from the physical bus wiring while providing the electrical interface required for multi-node communication. The 14-pin SO package supports compact surface-mount assembly in automotive control-unit designs.

The TJA1041A family is associated with ISO 11898 high-speed CAN communication and provides compatibility with CAN protocol controllers that provide TXD and RXD logic signals. The CANH and CANL connections carry complementary differential bus levels. This differential signaling improves common-mode noise rejection in vehicle electrical environments, where switching loads, alternator systems, and other transient-producing equipment can disturb the communication network.

Typical applications include automotive body-control modules, powertrain controllers, gateway units, dashboard electronics, seat and door modules, lighting controllers, small electric motors, and industrial or transportation equipment using a CAN bus. In these systems, the transceiver is placed between the host CAN controller and the CANH and CANL network conductors. PCB routing, termination, grounding, and protection remain critical because the transceiver is only one element of the complete physical-layer network.

Design the power and signal paths carefully around the 4.75 V to 5.25 V operating range. Decoupling should be placed close to the supply pins, the CANH and CANL traces should follow controlled-impedance routing practices, and the bus should use the termination strategy specified by the CAN network design. Protection components may be added when the cable environment includes severe automotive transients, provided their capacitance and clamping behavior do not distort the differential signal.

This product page combines the NXP technical description with lifecycle information, package identification, practical interface guidance, sourcing questions, and clearly qualified replacement analysis. It also highlights where an existing design can be reused and where a new PCB and EMC validation are required before changing CAN transceivers.

Mga alternatibo na pwedeng ilagay na TJA1041AT/V — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

TJA1041AT

✅ Drop-In
NXP Semiconductors
📦 SO-14
High-speed CAN transceiver · 1 Mbit/s · 4.75 V to 5.25 V · Differential · Differential · ISO 11898 · Automotive high-speed CAN

Magkontak para sa presyo

Tingnan ang Datasheet →

TJA1041

✅ Drop-In
📦 SO-14
Original TJA1041 family member provides the same 1 Mbit/s high-speed CAN function and 4.75 V to 5.25 V supply range; option-specific functions and qualifications require comparison.

📋 Alternatibo na Reference (hindi sa katalogo)

TJA1041AT/CM,118

✅ Drop-In
📦 SO-14
Listed 14-SO half-CANbus variant shares the 1 Mbit/s TJA1041AT function; the CM and 118 ordering suffixes define the specific delivery configuration.

📋 Alternatibo na Reference (hindi sa katalogo)

TJA1041AT/V Mga Spesipikasyon

Product Type High-speed CAN transceiver
Maximum CAN Data Rate 1 Mbit/s
Minimum Operating Supply Voltage 4.75 V
Maximum Operating Supply Supply Voltage 5.25 V
Bus Interface Differential CANH and CANL
Transmit Capability Differential
Receive Capability Differential
Protocol Controller Interface TXD and RXD logic signals
Primary Application Automotive high-speed CAN nodes
Packhaging 14-pin SO surface-mount package
Uri ng Pagpapasok Surface mount
CAN Transceiver Type Half CANbus transceiver
Katayuan ng Lifecycle End of Life
Manufacturer NXP Semiconductors

Gabay sa Pin Configuration ng TJA1041AT/V 14-pin so surface-mount package

Pin configuration para sa TJA1041AT/V (14-pin so surface-mount package package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 14-pin so surface-mount package package para sa TJA1041AT/V

Wala ng detalyadong pinout data na magagamit para sa TJA1041AT/V.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

TJA1041AT/V ay nararapat para sa 6 aplikasyons: Automotive Body Control Module, Vehicle Gateway and Communication Node, Dashboard and Instrument Cluster Electronics, Door, Seat, and Lighting Controller, Powertrain and Chassis Electronics, Industrial and Transportation CAN Equipment.

🚗

Automotive Body Control Module

The TJA1041AT/V fits an automotive body-control module because it connects a CAN controller to a differential CANH and CANL network at data rates up to 1 Mbit/s. Its 4.75 V to 5.25 V operating range aligns with a regulated 5 V vehicle electronics rail. Place the transceiver beside the controller and preserve short, symmetric bus routing so the differential signal retains low distortion. The primary design trade-off is that the part is marked End of Life, so production planning should include a controlled migration and last-time-buy assessment rather than treating new design adoption as risk-free.

🌐

Vehicle Gateway and Communication Node

A gateway or communication node can use the TJA1041AT/V as the physical-layer interface between its host controller and the vehicle CAN backbone. Differential transmit and receive capability supports communication at up to 1 Mbit/s, while the 5 V supply range suits regulated controller electronics. The transceiver should be positioned near the bus connector and protection network to minimize trace sensitivity. Because the family is End of Life, new gateway programs should evaluate a current replacement early enough to allow PCB routing, EMC, and network timing changes without rushing production validation.

📺

Dashboard and Instrument Cluster Electronics

The TJA1041AT/V is suitable for dashboard electronics that exchange control, status, and diagnostic frames over a high-speed CAN network. Its operation up to 1 Mbit/s provides sufficient physical-layer bandwidth, and differential signaling helps reject common-mode noise present in vehicle harnesses. Route CANH and CANL as a matched pair, place filtering close to the connector, and maintain the grounding arrangement required by the reference design. The key sourcing limitation is lifecycle status: NXP marks the TJA1041AT family as End of Life, making component continuity and last-time-buy planning essential.

🏭

Door, Seat, and Lighting Controller

Compact door, seat, or lighting modules can use the TJA1041AT/V when their controller needs a reliable high-speed differential CAN interface. The 14-pin SO package supports surface-mount assembly, and the 4.75 V to 5.25 V range is compatible with regulated 5 V module electronics. Keep the bus pair away from relay drivers, motor outputs, and switching-power nodes to reduce coupling. For a new platform, the End of Life designation is a material constraint; for an existing platform, verify the exact ordering suffix, stock position, and any approved migration before committing new production volumes.

🚗

Powertrain and Chassis Electronics

The TJA1041AT/V can support CAN communication in powertrain or chassis electronics when the network operates at the high-speed CAN rate of up to 1 Mbit/s. Differential bus signaling helps maintain data integrity in an electrical environment containing relays, solenoids, and switching transients. The design should include appropriate bus protection and maintain the transceiver's recommended ground and layout relationships. Engineers must also verify the exact suffix's temperature and qualification requirements, as the manufacturer identifies the TJA1041AT family as End of Life and does not establish every qualification parameter in the product summary.

⚡

Industrial and Transportation CAN Equipment

Industrial controllers, transportation equipment, and embedded monitoring systems can use the TJA1041AT/V when they already employ the NXP 14-pin SO high-speed CAN interface. The device provides differential transmit and receive functions at up to 1 Mbit/s and operates from 4.75 V to 5.25 V, allowing reuse of established 5 V power architecture and PCB routing. Controlled-impedance bus routing and correct termination remain necessary for dependable operation. For new equipment, compare current alternatives and plan validation because the end-of-life designation makes long-term availability uncertain.

What is the TJA1041AT/V and what does it do?
The TJA1041AT/V is an NXP Semiconductors high-speed CAN transceiver for automotive Controller Area Network nodes operating up to 1 Mbit/s. According to the NXP product information, it provides a differential transmitter and differential receiver between a CAN protocol controller and the physical CAN bus. The device also includes standby and sleep functionality and is packaged in a 14-pin SO package.
What operating voltage does the TJA1041AT/V use?
The TJA1041AT/V operates from 4.75 V to 5.25 V. The TJA1041AT part listing identifies a 4.75 V minimum and 5.25 V maximum operating supply. Designers should therefore use a regulated 5 V rail that remains within those limits across temperature, load transients, and automotive supply variation.
What is the maximum CAN data rate of TJA1041AT/V?
The maximum supported CAN data rate is 1 Mbit/s. According to the NXP TJA1041 technical description, the transceiver is primarily intended for automotive high-speed CAN applications up to 1 Mbit/s. This rating describes physical-layer signaling capability; controller performance, bit timing, bus length, termination, and electromagnetic compatibility also affect reliable network operation.
Where can I download the TJA1041AT/V datasheet PDF?
The official NXP TJA1041 datasheet is available from the NXP document URL listed on this page. It describes the transceiver architecture, operating conditions, electrical characteristics, pin assignments, and application information for the TJA1041 family. Use the NXP PDF rather than an unverified mirror when defining production limits, decoupling, bus timing, and PCB constraints.
Where can I find the TJA1041AT/V pinout?
The TJA1041AT/V pin assignments are documented in the pin-description table of the official NXP TJA1041 datasheet. The device uses a 14-pin SO package, and the package drawing identifies the orientation marker and physical terminal sequence. Assign PCB nets directly from that table because power, ground, logic-interface, and CAN bus pins must not be interchanged.
Is TJA1041AT/V suitable for automotive high-speed CAN?
The TJA1041AT/V is specifically described by NXP as a transceiver for automotive high-speed CAN applications up to 1 Mbit/s. Its differential CAN interface supports robust communication between a protocol controller and multiple bus nodes. For a production vehicle design, confirm the exact ordering code's temperature range, qualification status, and any NXP change notices before release.
TJA1041AT/V vs TJA1041AT/CM,118 - which is the better match?
TJA1041AT/V and TJA1041AT/CM,118 appear to identify variants of the same NXP TJA1041AT family, but the ordering suffixes determine the specific package, temperature, and delivery configuration. The exact TJA1041AT/CM,118 listing identifies a 14-SO half-CANbus transceiver. Confirm every suffix against the NXP ordering information before treating it as a production drop-in replacement.
What is the best drop-in replacement for TJA1041AT/V?
A valid drop-in replacement must match the 14-pin SO footprint, pin functions, 4.75 V to 5.25 V supply range, differential CAN interface, and 1 Mbit/s communication capability. The available cross-reference material identifies TJA1041AT and TJA1041AT/CM,118 as related NXP options, but it does not expose a complete five-part compatible list. Use the Request a Quote form to request a production quotation for the exact suffix and package.
Can TJA1041AT replace TJA1041 without changing the PCB?
TJA1041 can be considered for a PCB comparison because it belongs to the same NXP high-speed CAN transceiver family and shares the core 1 Mbit/s bus function. A no-change replacement still requires confirmation of package dimensions, terminal numbering, supply pins, logic-interface behavior, standby or sleep functionality, and temperature limits. The original PCB should be checked against the NXP package drawing before substitution.
When should I choose TJA1041AT/V instead of another CAN transceiver?
Choose TJA1041AT/V when an existing automotive design uses the NXP 14-pin SO TJA1041 interface and requires high-speed differential CAN operation at up to 1 Mbit/s. It is particularly suitable when preserving the PCB and established EMC layout is more important than redesigning around a different package or newer controller-integrated transceiver. Confirm lifecycle requirements because NXP marks the product as End of Life.
Is there a cross-brand equivalent for TJA1041AT/V?
A cross-brand equivalent cannot be declared drop-in solely from the available component descriptions because pin-level compatibility and operating limits must be demonstrated for the exact ordering code. Any candidate should provide a 14-pin SO-compatible footprint, 4.75 V to 5.25 V operation, differential CANH and CANL interface, and support for the required 1 Mbit/s network. Submit the candidate MPN with your requirements through the Request a Quote form for engineering review.
Is TJA1041AT/V in stock and what is its lead time?
Stock and lead time are not established by the manufacturer product page, which instead marks the TJA1041AT family as End of Life and provides shipping-discontinuance and replacement information. Request current availability, minimum order quantity, and lead time through the Request a Quote form on this page. Include the exact TJA1041AT/V ordering code so the response reflects the correct production variant.
How much does TJA1041AT/V cost?
The current commercial price for TJA1041AT/V is not quoted in static text because its end-of-life status can cause availability and pricing to change. Use the Request a Quote form on this page to request the current unit price, quantity breaks, stock, and lead time for the exact MPN. The structured pricing fields are reserved for current sourced offers and should not be inferred from historical catalog values.
What are the key specifications of TJA1041AT/V that engineers should know?
The principal specifications are a 4.75 V to 5.25 V operating supply, data rates up to 1 Mbit/s, differential transmit and receive capability, a 14-pin SO package, and an end-of-life lifecycle status. NXP describes the TJA1041A as an interface between a CAN protocol controller and the physical bus in an automotive high-speed CAN node. Detailed timeout, loopback, and power-mode values should be taken from the official datasheet.
What design details matter for a TJA1041AT/V CAN bus PCB?
Place supply decoupling near the transceiver supply pins, connect CANH and CANL as a controlled differential pair, and preserve the manufacturer-recommended grounding and termination arrangement. Keep sensitive logic routes separate from the bus traces and route the pair away from switching nodes. The bus must also satisfy ISO 11898 signal-integrity and EMC requirements for its length, topology, and operating environment.

Impormasyon ng Talumpati sa Engineering for TJA1041AT/V — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose TJA1041AT/V when maintaining an existing NXP TJA1041AT-based PCB is important and the design needs differential high-speed CAN operation up to 1 Mbit/s from a 4.75 V to 5.25 V supply. TJA1041AT is the closest base-family option when the exact suffix, grade, and delivery configuration match the original board. TJA1041 may suit legacy designs that already use the original transceiver, but standby, sleep, timeout, and qualification differences must be checked. TJA1041AT/CM,118 is relevant when its CM and 118 ordering codes satisfy the required configuration and the listed standby and sleep functions are desired. Because NXP marks the TJA1041AT family as End of Life, engineers should obtain production continuity details, consider a last-time-buy plan for active programs, and validate any cross-brand replacement through pin, electrical, EMC, and bus-timing testing.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto TJA1041AT TJA1041 TJA1041AT/CM,118
Package SO-14 SO-14 SO-14 14-SO
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Product Type High-speed CAN transceiver High-speed CAN transceiver High-speed CAN transceiver Half CANbus transceiver
Minimum Operating Supply Voltage 4.75 V 4.75 V 4.75 V 4.75 V
Maximum Operating Supply Voltage 5.25 V 5.25 V 5.25 V 5.25 V

Pangunahing mga Pagkakaiba

  • Direct retention of the established NXP TJA1041AT interface (kumpara saTJA1041AT)
  • Same core physical-layer performance as the original family member (kumpara saTJA1041)
  • Documented standby and sleep functionality in the listed ordering option (kumpara saTJA1041AT/CM,118)

Talaan ng Disenyo

Route CANH and CANL as a tightly coupled differential pair and keep the pair continuous across layers. Place the transceiver close to the CAN controller, while placing connector-side protection near the external pins. Maintain the ground and return-path arrangement shown in the NXP datasheet so common-mode and transient energy does not disrupt the differential receiver.

Provide a regulated 5 V supply that remains between the device's 4.75 V and 5.25 V operating limits. Place the required decoupling capacitors close to the supply and ground terminals with short return paths. Do not add bulk capacitance directly across CANH and CANL; excessive bus capacitance can reduce signal integrity and prevent reliable operation at the intended network bit rate.

Do not substitute the transceiver solely because the device names are similar. Confirm package dimensions, terminal numbering, supply requirements, standby or sleep behavior, temperature grade, and the exact ordering suffix before replacing TJA1041AT/V. The NXP page identifies an End of Life condition, so the exact variant, last-time-buy status, and approved migration should be documented before production approval.

Keep the CAN bus pair away from relay coils, motor windings, switching-regulator switches, and high-di/dt nets. Use the termination strategy required by the complete CAN topology rather than adding local resistors that could create incorrect bus impedance. Validate radiated and conducted emissions in the final enclosure and harness configuration because the transceiver alone cannot guarantee system-level EMC compliance.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer product page confirms an End of Life overview and shipping-discontinuance information but does not establish the requested compliance values. Check the exact ordering code with NXP before production release.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

tja1041at datasheet nxp tja1041at TJA1041AT/V datasheet TJA1041AT/V pinout TJA1041AT/V equivalent TJA1041AT/V replacement TJA1041AT drop-in replacement TJA1041AT vs TJA1041 TJA1041AT 1Mbit/s CAN transceiver TJA1041AT 4.75V 5.25V TJA1041AT SO-14 pinout TJA1041AT automotive CAN TJA1041AT price TJA1041AT stock TJA1041AT application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors TJA1041AT/V TJA1041AT TJA1041 TJA1041AT/CM,118 CAN transceiver Controller Area Network CAN bus physical-layer interface CAN protocol controller differential signaling CANH CANL high-speed CAN ISO 11898 1 Mbit/s 4.75 V 5.25 V SO-14 surface mount automotive electronics standby mode sleep mode EMC TJA1057GTK/3Z Z86E4412ASG
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ