NXP Semiconductors

TJA1051T/CM - 5Mbit/s High-Speed CAN Transceiver | NXP

MPN: TJA1051T/CM ✓ Nakahanda
8-pin SOIC Package
MOQ: 1 |

TJA1051T/CM Ulas

The NXP Semiconductors TJA1051T/CM is a high-speed CAN transceiver with a 5 Mbit/s data rate, designed to connect a CAN protocol controller to a two-wire CAN bus. It is supplied in an 8-pin SOIC surface-mount package for compact automotive and industrial control electronics. The device provides differential transmit and receive functions while placing the CAN physical-layer interface close to the host processor or microcontroller.

A CAN transceiver is an interface IC within the Controller Area Network hierarchy. It converts logic-level TXD and RXD signals into the dominant and recessive voltage levels used by a wired CAN network, while also receiving bus information for the controller. The TJA1051T/CM therefore connects a digital CAN controller to the physical wiring of a multi-node vehicle, industrial machine, or embedded communications system without requiring the controller to handle the bus electrical layer directly.

The TJA1051 family is identified by NXP as a third-generation high-speed CAN transceiver with enhanced electromagnetic compatibility performance. Its 5 Mbit/s capability supports data transfer rates commonly required by automotive body, chassis, comfort, and controller-area-network systems. Differential bus signaling helps reject common-mode noise, while the dedicated TXD and RXD paths provide a clear separation between commands sent to the bus and data returned to the CAN controller.

The eight-pin SOIC package supports compact surface-mount assembly and exposes the CANH and CANL bus terminals, VCC, ground connections, TXD, and RXD. This arrangement allows the transceiver to be placed close to the bus connector and controller, reducing the distance over which sensitive signals and supply connections must travel. Exact operating voltage, ESD ratings, standby behavior, and temperature limits should be confirmed in the manufacturer datasheet before final circuit release.

Typical uses include automotive CAN gateways, body-control modules, electric-window and seating controllers, industrial automation equipment, sensors, and embedded diagnostic systems. In each application, the CAN controller handles frame construction, arbitration, acknowledgments, and higher-level protocols, while the TJA1051T/CM handles the physical-layer voltage conversion and bus-interface function. This division allows the host processor to work with ordinary digital logic while multiple nodes communicate over a shared two-wire network.

PCB design should prioritize short CANH and CANL routes, a compact common return path, and placement of the transceiver close to the bus connector. The bus-side network also needs termination, filtering, and protection suited to the vehicle or industrial environment. Validate the complete channel against EMC, ESD, ground-offset, and fault-recovery requirements rather than relying on general transceiver ratings alone.

This page combines the manufacturer's product description, exact package identification, verified sourcing references, and practical guidance for comparing, sourcing, and integrating the TJA1051T/CM. It also highlights the engineering boundaries that must be checked in the datasheet before using a similarly packaged CAN transceiver as a drop-in replacement.

Mga alternatibo na pwedeng ilagay na TJA1051T/CM — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok TJA1051T/CM (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, Protocol, Application Domain, Bus Interface.

Microchip Technology
Package: 8-SOIC (SN), 3.90 mm body width
Protocol: CAN, CAN FD
Texas Instruments
Package: SOIC (D), 8 pins
Texas Instruments
Package: SOIC (D), 8 pins
Product Type: Automotive fault protected CAN FD transceiver
Protocol: CAN with Flexible Data-Rate (CAN FD)
NXP Semiconductors
Application Domain: Automotive high-speed CAN systems
Bus Interface: Differential two-wire CAN bus
NXP Semiconductors
Package: 8-pin SOIC, 8-SO gull-wing package
Product Type: 1/1 high-speed CAN transceiver
NXP Semiconductors
Protocol: CANbus, CAN FD (fast phase)

TJA1051T/3/CM,118

✅ Drop-In
📦 SOIC-8
Same 5 Mbit/s CAN transceiver class and SOIC-8 footprint; ordering-code and exact supply-voltage differences require verification

📋 Alternatibo na Reference (hindi sa katalogo)

TJA1042T/1J

✅ Drop-In
NXP Semiconductors
📦 SOIC-8
High-speed CAN transceiver · Differential two-wire CAN bus · Differential transmit and receive capability · High-speed CAN · Yes · 8-pin SOIC · SOIC-8 surface-mount package · 1/1 Transceiver Half CANbus 8-SO

Magkontak para sa presyo

Tingnan ang Datasheet →

TJA1057T/1Z

✅ Drop-In
NXP Semiconductors
📦 SOIC-8
High-speed CAN transceiver · NXP Semiconductors · Mantis (TJA1057) · 1/1 · CANbus, CAN FD (fast phase) · 1 Mbit/s (max) · 5 Mbit/s (max) · ISO 11898-2:2024 third edition; SAE J2284-1 to SAE J2284-5

Magkontak para sa presyo

Tingnan ang Datasheet →

TCAN1042VDRQ1

✅ Drop-In
Texas Instruments
📦 SOIC-8
CAN FD Transceiver · CAN, CAN FD (flexible data-rate) · 5 Mbps · 4.5 V to 5.5 V · Yes, VIO pin for 3.3V/5V logic · 1/1 · Half · CANH/CANL short to battery and ground

✗ Wala sa Stock

$0.33923 / Yunit

Tingnan ang Datasheet →

TCAN1051VDRQ1

✅ Drop-In
Texas Instruments
📦 SOIC-8
Automotive fault protected CAN FD transceiver · CAN with Flexible Data-Rate (CAN FD) · 1/1 · Half duplex · Yes (VIO secondary supply input) · Yes (STB pin, listen-only standby) · Bus fault protected (CANH/CANL)

Magkontak para sa presyo

Tingnan ang Datasheet →

MCP2562FD-E/SN

✅ Drop-In
Microchip Technology
📦 SOIC-8
CAN, CAN FD · Transceiver (1/1) · 1/1 · 8 Mbps · 1 Mbps · <= 130 ns · 1.8 V to 5.5 V · 4.5 V to 5.5 V

Magkontak para sa presyo

Tingnan ang Datasheet →

TJA1051T/CM Mga Spesipikasyon

Product Type High-speed CAN transceiver
Maximum CAN Data Rate 5 Mbit/s
Bus Interface 2-wire differential CAN bus
Transmit Interface Differential TXD to CANH/CANL
Receive Interface Differential CANH/CANL to RXD
Logic Input TXD
Logic Output RXD
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount

Pin Configuration ng TJA1051T/CM

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 TXD — Transmit data input from the CAN controller
Pin 2 GND — Ground connection
Pin 3 NC — No connection
Pin 4 RXD — Receive data output to the CAN controller
Pin 5 VCC — Transceiver supply connection
Pin 6 CANL — CAN low bus terminal
Pin 7 CANH — CAN high bus terminal
Pin 8 GND — Ground connection

Tipikal na mga Gamit

TJA1051T/CM ay nararapat para sa 6 aplikasyons: Automotive Body Control Module, CAN Gateway and Network Interface, Industrial Automation Sensor Node, Vehicle Diagnostic Interface, Embedded CAN Communication Module, Robotics and Motor-Control Network.

🚗

Automotive Body Control Module

The TJA1051T/CM fits a body-control module that connects a CAN controller to vehicle wiring carrying climate, lighting, door, and seating commands. Its 5 Mbit/s capability supports high-speed communication, while the differential CANH/CANL interface connects the digital controller to the physical bus. Place the transceiver close to the bus connector and CAN controller, route CANH and CANL as a compact pair, and verify the exact ordering variant's automotive qualification and transient ratings against the vehicle requirements.

🌐

CAN Gateway and Network Interface

The TJA1051T/CM is suitable for a CAN gateway that bridges one or more CAN physical networks to a higher-level controller. The TXD path accepts commands from the protocol controller, and the RXD path returns decoded bus activity, while the transceiver handles the differential signaling on the two-wire network. The 5 Mbit/s data rate supports high-bandwidth gateway traffic. Validate node timing, termination, common-mode behavior, fault recovery, and ground-reference differences across connected modules before deployment.

🏭

Industrial Automation Sensor Node

The TJA1051T/CM can provide the physical CAN interface for an industrial sensor node that reports measurements to a programmable controller or supervisory system. Differential signaling supports communication over shared wiring where noise and grounding differences are present. Its 5 Mbit/s rate permits rapid periodic data exchange without loading the controller's communications task. Select bus protection and filtering for the installation environment, observe termination placement, and confirm the transceiver's exact EMC and ESD performance during system qualification.

🔧

Vehicle Diagnostic Interface

The TJA1051T/CM is appropriate for a vehicle diagnostic interface that connects a diagnostics processor to a CAN bus carrying powertrain, chassis, or body data. The high-speed interface complements controllers that already implement CAN frame handling and diagnostics services. The transceiver translates controller logic into differential bus signals and returns received bus states through RXD. For a production design, confirm the selected suffix's operating-temperature range, ESD rating, bus-fault recovery, and automotive qualification before approving the module.

🧩

Embedded CAN Communication Module

The TJA1051T/CM suits an embedded communication module built around a microcontroller or dedicated CAN controller. The controller handles arbitration, filtering, acknowledgments, and protocol frames, while the transceiver provides the electrical interface to the two-wire network. Its 5 Mbit/s capability can shorten response times in high-rate machine-control or data-acquisition systems. Keep TXD and RXD routing short, maintain a stable ground reference, and test the assembled node with the intended bus length and termination.

🤖

Robotics and Motor-Control Network

The TJA1051T/CM can be used in a robotics or motor-control network where distributed controllers exchange motion commands and status data over CAN. The 5 Mbit/s interface supports timely updates across multiple nodes, and differential bus signaling improves robustness in electrically noisy environments. Place the transceiver near the CAN connector, use symmetrical routing for CANH and CANL, and incorporate the termination and protection required by the motor environment. Verify fault behavior during power-up, bus-off recovery, and disconnected-cable conditions.

What is the TJA1051T/CM?
The TJA1051T/CM is an 8-pin high-speed CAN transceiver from NXP Semiconductors that operates at up to 5 Mbit/s. According to the NXP TJA1051T product information, it provides a physical-layer interface between a CAN protocol controller and a two-wire CAN bus, with differential transmit and receive paths for automotive and embedded CAN systems.
What are the key specifications of TJA1051T/CM that engineers should know?
The TJA1051T/CM combines a 5 Mbit/s CAN data rate, differential CANH/CANL bus signaling, TXD and RXD logic paths, and an 8-pin SOIC package. NXP describes the TJA1051 as a third-generation high-speed CAN transceiver with enhanced electromagnetic compatibility performance. Confirm the exact supply range, temperature grade, ESD ratings, and standby limits in the manufacturer datasheet.
Where can I download the TJA1051T datasheet PDF?
The official TJA1051T product page provides access to the NXP datasheet and supporting product information. It identifies the device as an active high-speed CAN transceiver for two-wire automotive CAN networks. Use the NXP document for authoritative pin descriptions, electrical characteristics, limiting values, and application guidance before committing the circuit to production.
Where can I find the TJA1051T pinout?
The TJA1051T pin assignment is shown in the NXP manufacturer datasheet, while the distributor listing identifies the TJA1051T/CM as an 8-SO device. The SOIC-8 arrangement includes TXD, RXD, VCC, CANH, CANL, and ground connections. Use the package drawing and pin-description table when assigning PCB tracks and connector polarity.
What is the TJA1051T/CM used for?
The TJA1051T/CM is used to connect a CAN protocol controller to a physical two-wire CAN bus. Its differential transmitter drives the CANH and CANL network conductors, while its receiver converts bus states into an RXD signal for the controller. Common uses include automotive body modules, industrial controllers, diagnostics, sensors, and CAN gateways operating at up to 5 Mbit/s.
Is the TJA1051T/CM compatible with a 5 Mbit/s CAN bus?
Yes, the TJA1051T/CM is specified as a high-speed CAN transceiver capable of 5 Mbit/s communication. The NXP product information identifies it for automotive CAN applications and differential transmit and receive operation. Actual network performance also depends on transceiver timing, termination, wiring length, topology, controller configuration, and electromagnetic compatibility.
What is the difference between TJA1051T/CM and TJA1051T/3/CM,118?
Both devices belong to the TJA1051 high-speed CAN transceiver family and are associated with 5 Mbit/s CAN operation, but their ordering codes may identify different qualification or feature variants. The exact supply, temperature, and logic-level differences must be checked in the NXP datasheet. Use the complete ordering information rather than treating the suffixes as interchangeable.
Can TCAN1042 replace the TJA1051T/CM?
A TCAN1042 can be considered as a candidate replacement because cross-reference information identifies it as a CAN transceiver alternative in the same SOIC-8 class. It is not automatically a drop-in substitute: supply voltage, logic thresholds, standby behavior, ESD performance, loop delay, and CAN FD capability can change the circuit behavior. Validate every electrical limit before replacement.
What can replace the TJA1051T/CM?
The most credible replacement candidates are CAN transceivers with the same 8-pin SOIC footprint and compatible 5 Mbit/s operation, including TCAN1042, TCAN1051V, MCP2562FD, and certain NXP TJA1051 variants. A mechanical footprint match does not guarantee identical behavior. Confirm VCC, TXD/RXD thresholds, standby control, bus fault behavior, ESD ratings, and automotive qualification for the intended design.
Is the TJA1051T/CM the same as TJA1057T/1Z?
No, the TJA1051T/CM and TJA1057T/1Z are not automatically equivalent despite being related high-speed CAN transceivers. The TJA1051 family is rated for 5 Mbit/s operation, while the TJA1057 belongs to a different NXP transceiver family with potentially different electrical and fault-recovery characteristics. Review the comparison tables and perform bus-level qualification before substitution.
When should I choose the TJA1051T/CM instead of a TJA1042T/1J?
Choose the TJA1051T/CM when the design requires the TJA1051 family's 5 Mbit/s capability and its defined EMC behavior. Consider the TJA1042T/1J when its supply range, standby implementation, and bus protection characteristics are a better match for the system. Both use an 8-pin SOIC format, but pin-level functions and electrical limits must be compared before replacement.
Is the TJA1051T/CM suitable for an automotive CAN gateway?
The TJA1051T/CM is suitable for an automotive CAN gateway when its exact ordering variant meets the required temperature and automotive-quality criteria. NXP positions the TJA1051 as an automotive high-speed CAN transceiver with enhanced EMC performance. The complete part number, AEC-Q100 status, transient limits, and environmental requirements should be confirmed before production release.
Where can I buy TJA1051T/CM online?
Use the Request a Quote form on this page to request TJA1051T/CM pricing, stock confirmation, and lead time. The form allows the inquiry to be matched to the exact ordering code and packaging requirements. Confirm the manufacturer, suffix, package, quantity, and delivery target in the request so the quotation is not based on a different member of the TJA1051 family.
What is the price of TJA1051T/CM?
Use the Request a Quote form on this page for the current TJA1051T/CM price and volume breaks. Pricing can change with the exact suffix, reel or tray packaging, order quantity, and market conditions. The quote request should state the complete part number, target quantity, and delivery location for a precise commercial response.
What is the lead time and stock status for TJA1051T/CM?
Current TJA1051T/CM stock and lead time can be requested through the Request a Quote form on this page. Include the required quantity, packaging format, target delivery date, and any required traceability. Do not assume availability from a family-level listing, because package suffixes and shipment schedules may differ between exact ordering codes.

Impormasyon ng Talumpati sa Engineering for TJA1051T/CM — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the TJA1051T/CM for a 5 Mbit/s classical-CAN design that uses the NXP TJA1051 transceiver family and requires its documented EMC characteristics. It is a strong fit for automotive modules, industrial controllers, and embedded gateways with a straightforward TXD/RXD interface. Consider TJA1051T/3/CM,118 first when its ordering suffix supplies the exact required supply range or qualification, but verify the distinction before substitution. Use TJA1042T/1J only when 1 Mbit/s operation and its standby behavior are acceptable. TJA1057T/1Z belongs to a different NXP family, while TCAN1042 and TCAN1051V may change enable, protection, or threshold behavior. MCP2562FD is useful when CAN FD is required, but its additional protocol mode is unnecessary for a classical-CAN-only network. Regardless of the selected MPN, verify electrical limits, timing, fault recovery, temperature grade, and automotive qualification.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto TJA1051T/3/CM,118 TJA1042T/1J TJA1057T/1Z TCAN1042 TCAN1051V MCP2562FD
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors Texas Instruments Texas Instruments Microchip Technology
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8 SOIC-8
Bus Interface 2-wire differential CAN 2-wire differential CAN 2-wire differential CAN 2-wire differential CAN 2-wire differential CAN 2-wire differential CAN 2-wire differential CAN
CAN FD Support Classical CAN at 5 Mbit/s Classical CAN at 5 Mbit/s Classical CAN Classical CAN Classical CAN Classical CAN CAN FD
Pin-to-Pin Status 8-pin SOIC reference design 8-pin SOIC candidate; verify variant details 8-pin SOIC candidate; verify electrical compatibility 8-pin SOIC candidate; verify family differences 8-pin SOIC pin-to-pin replacement candidate 8-pin SOIC pin-to-pin replacement candidate 8-pin SOIC pin-to-pin replacement candidate

Pangunahing mga Pagkakaiba

  • Higher nominal CAN rate than the 1 Mbit/s TJA1042T/1J candidate (kumpara saTJA1042T/1J)
  • TJA1051-family EMC positioning (kumpara saTJA1057T/1Z)
  • Classical CAN focus without relying on CAN FD behavior (kumpara saMCP2562FD)
  • Established NXP high-speed transceiver family (kumpara saTCAN1042)

Talaan ng Disenyo

Place the TJA1051T/CM close to the CAN connector and route CANH and CANL as a short, closely coupled pair. Avoid discontinuities, long stubs, and sharp geometry that increase radiated emissions or susceptibility. Keep the bus-side return connection continuous, and observe the termination arrangement required at each end of the network. PCB-layer changes can affect differential impedance even when the nominal bus rate remains 5 Mbit/s.

Do not select a replacement from package shape alone. Confirm VCC, TXD and RXD logic thresholds, standby or enable behavior, loop delay, receiver propagation delay, bus fault recovery, ESD ratings, and the exact temperature grade. The TJA1051T/CM, TJA1042T/1J, TCAN1042, TCAN1051V, and MCP2562FD occupy the SOIC-8 class, but their electrical and protocol behaviors are not necessarily identical.

The TJA1051 family is positioned by NXP as a third-generation CAN transceiver with enhanced electromagnetic compatibility. Preserve that performance by using a continuous ground plane, short TXD and RXD paths, properly placed supply decoupling, and a symmetrical bus layout. Qualification testing should include conducted and radiated emissions, immunity, ground-offset conditions, and operation with realistic cable lengths because laboratory high-speed operation alone does not establish EMC compliance.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The exact compliance and qualification status must be confirmed for the complete ordering code using NXP product documentation.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

tja1051t datasheet tja1051t module tja1051t 3 datasheet TJA1051T/CM datasheet TJA1051T/CM datasheet pdf TJA1051T/CM pinout TJA1051T/CM replacement TJA1051T/CM equivalent TJA1051T/CM vs TJA1042T/1J TJA1051T/CM price TJA1051T/CM stock NXP TJA1051T/CM TJA1051T/CM application circuit TJA1051T/CM footprint

Mga kaugnay na Mga Komponente at mga Tuntunin

NXP Semiconductors TJA1051T/CM TJA1051T TJA1051T/3/CM,118 TJA1042T/1J TJA1057T/1Z TCAN1042 TCAN1051V MCP2562FD CAN transceiver high-speed CAN Controller Area Network CAN protocol controller differential transmitter differential receiver CANH CANL TXD RXD 5 Mbit/s SOIC-8 surface mount automotive networking EMC two-wire bus
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ