TLE6250GV33XUMA1/BKN - 1 MBd CAN Transceiver | Infineon
MPN: TLE6250GV33XUMA1/BKN ✓ NakahandaTLE6250GV33XUMA1/BKN Ulas
A CAN transceiver, also called a CAN physical-layer interface, converts logic-level transmit and receive signals into the differential signaling used by a Controller Area Network. It belongs to the interface IC hierarchy, connecting digital controllers and automotive electronics to the physical bus while providing bus-driver, receiver, and protection functions.
Key characteristics include a 1 MBaud maximum signaling rate, a 4.5 V to 33 V supply range, and operation suited to 12 V and 24 V CAN networks. The PG-DSO-8 package supports compact surface-mount PCB layouts, while the wide supply range accommodates both conventional automotive voltages and higher-voltage industrial installations. The Infineon datasheet identifies the device as a RoHS-compliant green product suitable for lead-free soldering according to IPC/JEDEC J-STD-020.
The TLE6250 family is designed for high-speed CAN communication, with the manufacturer classifying TLE6250G-V33 as compatible with ISO 11898. Its architecture places the CAN transmit input, receive output, logic reference, transceiver supply, and differential bus connections on a compact eight-pin package. This integration allows a host microcontroller or CAN controller to communicate over a robust multidrop bus.
Typical uses include automotive body electronics, powertrain and chassis control modules, industrial automation equipment, and other embedded CAN networks. The 1 MBaud capability supports real-time control and diagnostic traffic, while the 33 V maximum supply permits operation in electrical environments substantially above a conventional 5 V logic level.
PCB implementation should follow the manufacturer pin-definition and application-circuit guidance. Keep the CANH and CANL traces short, provide the prescribed bus and supply decoupling, and preserve the intended common-mode behavior of the network. The transceiver can dissipate power from its supply and bus connections, making component placement and thermal-path design important in compact modules.
This product page combines the manufacturer electrical characteristics, verified distributor listing information, same-package family references, and practical PCB guidance. It helps engineers assess TLE6250GV33XUMA1/BKN for a new CAN node or determine whether an existing TLE6250 design can be consolidated without changing its 8-pin footprint.
Mga alternatibo na pwedeng ilagay na TLE6250GV33XUMA1/BKN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok TLE6250GV33XUMA1/BKN (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, RoHS Status, Supply Voltage Range.
TLE6250GV33XUMA1
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →TLE6250G-V33
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
TLE6250GV33XUMA1/BKN Mga Spesipikasyon
| Product Type | High-speed CAN transceiver |
| CAN Interface Mode | 1/1 transceiver, half-duplex CANbus |
| Maximum Data Rate | 1 MBd |
| Supply Voltage Range | 4.5 V to 33 V |
| Nominal Bus Voltage | 12 V to 24 V |
| Kuru-kuryente ng Pagbibigay | 70 mA |
| CAN Protocol Compatibility | ISO 11898 |
| Packhaging | PG-DSO-8, 8 pins |
| Uri ng Pagpapasok | Surface mount |
| Transmit Data Input | 20 kOhm pull-up |
| EMC Performance | Application-optimized EMC performance |
| Tindminan RoHS | Compliant |
| Lead-Free Soldering | Compliant with IPC/JEDEC J-STD-020 |
| Product Status | Green product |
| Operating Voltage | 4.5 V to 33 V |
| Rate ng Data | 1 MBd |
| Uri ng Interface | CANbus |
| Manufacturer Document Revision | Rev. 4.1, 2017-03-15 |
Pin Configuration ng TLE6250GV33XUMA1/BKN
| Pin 1 | TxD — CAN transmit data input with 20 kOhm pull-up |
| Pin 2 | GND — Ground connection |
| Pin 3 | VIO — Logic-level supply and reference interface |
| Pin 4 | RxD — CAN receive data output |
| Pin 5 | VCC — Transceiver supply connection |
| Pin 6 | GND — Ground connection |
| Pin 7 | CANH — CAN high bus output and input |
| Pin 8 | CANL — CAN low bus output and input |
Tipikal na mga Gamit
TLE6250GV33XUMA1/BKN ay nararapat para sa 6 aplikasyons: Automotive Body Control Modules, Powertrain and Chassis Control, Industrial Automation Equipment, Vehicle Diagnostic Gateways, Embedded CAN Sensor Hubs, Robotics and Mobile Platforms.
Automotive Body Control Modules
The TLE6250GV33XUMA1/BKN fits body control modules that connect door, lighting, climate, or central locking electronics to a vehicle CAN network. Its 1 MBd capability provides sufficient bandwidth for coordinated control commands and diagnostic traffic, while the 4.5 V to 33 V operating range accommodates 12 V and 24 V vehicle environments. The 8-pin PG-DSO-8 package supports compact controller boards. According to the Infineon manufacturer datasheet, the family is ISO 11898-compatible and designed for EMC performance; final qualification should confirm the exact temperature grade, transient behavior, and bus protection for the vehicle platform.
Inirekomenda
Powertrain and Chassis Control
The TLE6250GV33XUMA1/BKN is suitable for powertrain and chassis electronics that exchange control or sensor data over a CAN bus. Its 1 MBd data rate supports real-time communication, and the 33 V maximum operating voltage provides margin above nominal 12 V and 24 V vehicle rails. The half-duplex interface combines transmit and receive functions in an 8-pin PG-DSO-8 package, reducing board area beside a CAN controller. For safety-related deployment, use the Infineon manufacturer datasheet to verify operating-temperature limits, electrical transient ratings, EMC performance, and the qualification status of the exact ordering code.
Inirekomenda
Industrial Automation Equipment
The TLE6250GV33XUMA1/BKN can interface industrial automation controllers, remote I/O modules, and machine-control nodes using CAN communication. Its 4.5 V to 33 V supply range supports both low-voltage logic and 24 V industrial systems, and the 1 MBd rate accommodates control loops, configuration data, and diagnostics. The Infineon family is compatible with ISO 11898 and emphasizes EMC performance, which is important around motors, relays, and long bus cables. Validate termination, common-mode voltage, isolation strategy, grounding, and conducted-versus-radiated immunity against the final machine architecture.
Inirekomenda
Vehicle Diagnostic Gateways
The TLE6250GV33XUMA1/BKN suits gateway modules that bridge vehicle CAN segments or aggregate diagnostic information. A 1 MBd CAN interface permits responsive command forwarding, while the 4.5 V to 33 V supply range supports 12 V and 24 V automotive electrical systems. Its compact PG-DSO-8 package leaves board area for a controller, memory, and communication interfaces. According to the Infineon manufacturer datasheet, the family targets ISO 11898 compatibility and EMC performance. Confirm the required bus speed, standby behavior, transceiver operating mode, environmental range, and exact order-code qualification before integrating it into a gateway.
Inirekomenda
Embedded CAN Sensor Hubs
The TLE6250GV33XUMA1/BKN can connect embedded sensor hubs to a CAN-based monitoring network. The 1 MBd interface is suitable for periodic environmental, pressure, position, or equipment-status measurements, while the 8-pin PG-DSO-8 package simplifies compact controller layouts. Operating from 4.5 V to 33 V allows use in industrial or vehicle-derived systems with appropriate supply conditioning. The Infineon TLE6250 family’s ISO 11898 compatibility and EMC emphasis are valuable when the harness is long or the electronics sit near switching equipment. Confirm bus loading, termination placement, protection requirements, and the exact environmental qualification.
Inirekomenda
Robotics and Mobile Platforms
The TLE6250GV33XUMA1/BKN is applicable to CAN-connected robot controllers, mobile platforms, and distributed actuator networks. The 1 MBd bus rate supports coordinated commands and sensor feedback, while the 4.5 V to 33 V supply range provides compatibility with 24 V mobile platforms. Its half-duplex CAN interface combines controller-facing logic and bus-side signaling in one compact package. The Infineon manufacturer datasheet identifies ISO 11898 compatibility and EMC-focused design for the family. Platform engineers should still check grounding, bus common mode, cable length, termination, surge exposure, and qualification because those requirements depend on the complete robotic installation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for TLE6250GV33XUMA1/BKN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | TLE6250GV33 | TLE6250G-V33 |
|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-DSO-8 | PG-DSO-8 | PG-DSO-8 |
| Transceiver Type | 1/1 half-duplex CANbus transceiver | High-speed CAN transceiver | High-speed CAN transceiver |
| Maximum Data Rate | 1 MBd | 1 MBd | 1 MBd |
| Supply Voltage Range | 4.5 V to 33 V | 4.5 V to 33 V | 4.5 V to 33 V |
| Nominal Bus Voltage | 12 V to 24 V | 12 V to 24 V | 12 V to 24 V |
| ISO 11898 Compatibility | Compatible | Compatible | Compatible |
| RoHS Status | Compliant | Green product | Green product |
| EMC Performance | Application-optimized EMC performance | Application-optimized EMC performance | Application-optimized EMC performance |
Pangunahing mga Pagkakaiba
- Supports the full 4.5 V to 33 V operating range required for 12 V and 24 V CAN networks (kumpara saTLE6250G-V33)
- Uses the same compact 8-pin PG-DSO-8 CAN-transceiver footprint (kumpara saTLE6250GV33)
- Combines transmit and receive functions in a half-duplex physical-layer interface (kumpara saTLE6250G-V33)
Talaan ng Disenyo
Treat CANH and CANL as a differential pair with continuous, closely spaced routing from the transceiver to the bus connector or isolation interface. Minimize stubs, vias, and unnecessary length because discontinuities can impair signal integrity and EMC behavior. Follow the Infineon application circuit for the placement and value of bus-side and supply decoupling capacitors. Keep the high-current return path compact and place the protection devices close to the connector where the cable enters the board.
Check supply current and voltage drop at the transceiver, including the listed 70 mA operating condition and additional CAN output-current demand. The 4.5 V to 33 V input range does not remove the need to control transients from the vehicle or industrial bus. Use the manufacturer electrical-characteristic table to select the local supply impedance and protection network, and ensure that the regulator driving VCC retains adequate margin at the highest bus and ambient conditions.
Connect the VIO and logic-side pins according to the controller interface, keeping the high-speed digital receive path away from CANH, CANL, and switching-power nodes. A common ground reference is required unless the design uses an isolated CAN interface, in which case the isolation boundary must be placed according to the chosen isolator architecture. Review the exact pin-definition table in the Infineon manufacturer datasheet before assigning tracks because the PG-DSO-8 footprint provides both supply and bus-side connections.
A CAN bus often leaves the enclosure, so common-mode voltage, radiated emissions, and immunity must be addressed at the connector rather than only around the IC. Place any external bus protection close to the connector, maintain the recommended return path, and verify that cable length, topology, and termination match the intended 1 MBd network. Infineon identifies the family’s EMC performance as an application feature, but system-level EMC testing remains necessary because harness and enclosure geometry affect emissions.
Impormasyon ng Pagsunod sa Kautusan
The Infineon manufacturer datasheet identifies TLE6250 as a green, RoHS-compliant product with a Pb-free finish suitable for Pb-free soldering according to IPC/JEDEC J-STD-020.