Texas Instruments

TLV2461IP - 6V RRIO 6.4MHz Op Amp | Texas Instruments

MPN: TLV2461IP ✓ Nakahanda
6 V Vdss 8-PDIP Package
MOQ: 1 |

TLV2461IP Ulas

The Texas Instruments TLV2461IP is a single, 6 V, 6.4 MHz rail-to-rail input/output operational amplifier packaged in an 8-pin plastic DIP. It combines a low-noise amplifier core with rail-to-rail input and output stages for portable instrumentation, sensor signal conditioning, and low-voltage analog systems. The TLV2461IP provides one amplifier circuit in an 8-PDIP package.

A rail-to-rail input/output operational amplifier is an analog signal-conditioning IC whose input common-mode range and output swing extend toward the positive and negative supply rails. This capability is useful when a signal approaches either supply limit, where a conventional fixed-range amplifier would clip or become nonlinear. Within the broader hierarchy, the TLV2461IP is an operational amplifier, an analog amplifier IC, and a semiconductor for low-voltage power management and signal processing.

The principal device characteristics are a 6 V supply rating, 6.4 MHz gain-bandwidth product, and rail-to-rail input/output operation. The single-amplifier configuration supports space-efficient designs where one analog channel is sufficient. Its 8-PDIP construction also facilitates prototyping, educational circuits, and through-hole industrial assemblies where surface-mount rework would be inconvenient.

The TLV2461 family targets portable and low-voltage applications where rail-to-rail signal handling is important. According to the Texas Instruments TLV2461 product information, the device is specified as a single 6 V, 6.4 MHz RRIO operational amplifier. Its architecture places the amplifier in the signal-conditioning hierarchy between a sensor or source and an ADC, transducer driver, or analog processing stage. Exact current, noise, offset, and temperature specifications should be confirmed in the manufacturer datasheet for the selected operating conditions.

Typical uses include portable measurement systems, battery-powered sensor interfaces, low-voltage audio paths, industrial controls, and general-purpose analog filtering. In a sensor-conditioning circuit, the amplifier can accept signals near the supply rails while presenting low-versus-high input impedance to the source. In an active filter or level-shifting stage, rail-to-rail output behavior can reduce clipping when the calculated output approaches the available supply range.

Designers should review the pin-description table, recommended operating conditions, electrical characteristics, and application information in the manufacturer datasheet before layout. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be handled according to the datasheet guidance rather than left floating when the configuration permits it.

This page combines the TLV2461IP device identity, package information, verified manufacturer and distributor references, application guidance, and same-footprint alternatives into a focused engineering selection resource. It helps buyers evaluate the TLV2461IP for the Texas Instruments TLV2461 6 V RRIO operational-amplifier family while keeping board-level compatibility and application fit in view.

Mga alternatibo na pwedeng ilagay na TLV2461IP — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok TLV2461IP (parehas na form factor at footprint) — pagkakaiba sa Amplifier Type, Input Common-Mode Range, Output Swing.

Texas Instruments
Amplifier Type: Single-circuit general-purpose operational amplifier
Input Common-Mode Range: Rail-to-rail input
Output Swing: Rail-to-rail output
Ikabit sa TLV2461IP →

TLV2461AIP

✅ Drop-In
📦 8-PDIP
Same 6 V supply rating and 6.4 MHz gain-bandwidth product; revision/order-code suffix differs by 0% in those headline ratings

📋 Alternatibo na Reference (hindi sa katalogo)

TLV2461CP

✅ Drop-In
Texas Instruments
📦 8-PDIP
Single-circuit general-purpose operational amplifier · 1 channel · 6 V · 6.4 MHz · Rail-to-rail input · Rail-to-rail output · Low-power operational amplifier · Available in the TLV246x family

Magkontak para sa presyo

Tingnan ang Datasheet →

TLV2461CPE4

✅ Drop-In
📦 8-PDIP
Same 6 V supply rating and 6.4 MHz gain-bandwidth product; E4 order code identifies a distinct ordering variant with a 0% headline-rating change

📋 Alternatibo na Reference (hindi sa katalogo)

TLV2461IP Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Single operational amplifier
Number of Circuits 1 circuit
Supply Voltage Rating 6 V
Gain-Bandwidth Product 6.4 MHz
Input Common-Mode Range Rail-to-rail
Output Swing Rail-to-rail
Packhaging 8-PDIP
Bilang ng Pin 8 pins
Uri ng Pagpapasok Through-hole

Pin Configuration ng TLV2461IP

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 NC — Not connected
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 NC — Not connected
Pin 6 SHDN — Shutdown input
Pin 7 V+ — Positive supply connection
Pin 8 OUT — Output

Tipikal na mga Gamit

TLV2461IP ay nararapat para sa 6 aplikasyons: Portable Sensor Signal Conditioning, Portable Audio Output Stage, Low-Voltage Active Filter, Industrial Control Signal Amplifier, Battery-Powered Data Acquisition, Test and Measurement Buffer.

🧩

Portable Sensor Signal Conditioning

The TLV2461IP fits low-voltage sensor interfaces that operate close to the available supply range. Its 6 V supply rating suits compact single-supply systems, while rail-to-rail input operation allows the amplifier to monitor sensor outputs that would otherwise approach the positive or negative rail. The 6.4 MHz gain-bandwidth product provides useful bandwidth for filtering and gain stages, although source impedance and input-bias-current requirements should be checked before selecting the amplifier. Place the device close to the sensor interface, keep the input route short, and provide local supply bypassing. The practical benefit is improved signal utilization in battery-powered equipment, where leaving several volts of input range unused would reduce usable measurement span.

🎧

Portable Audio Output Stage

The TLV2461IP can support low-voltage audio and communication output stages where the signal must remain usable near the supply limits. Its 6 V maximum supply classification and rail-to-rail output design can reduce clipping in compact headphone, line-level, or signal-buffer circuits when the calculated waveform approaches the available output range. The 6.4 MHz gain-bandwidth product is substantially higher than the audio-band signal, allowing closed-loop gain to be set without placing the amplifier near its bandwidth limit. The design should still account for output-load limits, gain error, and the frequency response shown in the manufacturer datasheet.

🔧

Low-Voltage Active Filter

The TLV2461IP is appropriate for first-order or higher-order active-filter stages operating from a 6 V-class supply. Its 6.4 MHz gain-bandwidth product provides bandwidth relative to many low-frequency measurement, control, and audio-filter requirements, while rail-to-rail input and output behavior helps preserve signal range in low-voltage systems. Component tolerances and the amplifier's gain-bandwidth response will shape the filter response, so simulated results should be checked against the datasheet limits. Keep feedback components close to the amplifier and route the input and output away from high-current switching paths.

🏭

Industrial Control Signal Amplifier

The TLV2461IP can amplify low-level control signals in compact industrial electronics when the analog node operates within a 6 V supply. Rail-to-rail inputs help accept controller outputs and sensor signals close to the supply boundary, while the 6.4 MHz gain-bandwidth product provides adequate bandwidth for many slow control loops and diagnostic waveforms. The single-amplifier 8-PDIP package reduces analog channel count compared with a dual or quad device. Engineers should verify offset, common-mode behavior, output drive, and noise against the specific transducer or controller before production release.

📱

Battery-Powered Data Acquisition

The TLV2461IP is useful in battery-powered data-acquisition front ends that require signal amplification close to the available supply rail. The rail-to-rail input stage maximizes the measurable span of a 6 V-class system, while the 6.4 MHz gain-bandwidth product can accommodate acquisition signals well above a slow sensor-control bandwidth. For an ADC interface, choose the closed-loop gain and settling behavior according to the manufacturer data, then verify that the output swing leaves sufficient margin for the converter input range. Short traces, stable reference grounding, and local decoupling are especially important in compact mixed-signal equipment.

📟

Test and Measurement Buffer

The TLV2461IP can buffer low-level signals in compact test and measurement equipment that operates from a low-voltage supply. Rail-to-rail input behavior reduces headroom loss when probing or conditioning signals near the rails, and the 6.4 MHz gain-bandwidth product supports higher-bandwidth measurement paths than a basic precision dc amplifier. The 8-PDIP package is convenient for instrument prototypes and through-hole control boards. For accurate measurements, evaluate input bias current, offset, noise, and output-loading behavior against the source and instrument architecture, and maintain a symmetrical ground reference around the measurement path.

Buod ng mga Inirekomendang Produkto

TLV2461AIP Same-family 8-PDIP operational amplifier Ginagamit sa: Portable Sensor Signal Conditioning, Portable Audio Output Stage, Low-Voltage Active Filter, Industrial Control Signal Amplifier, Battery-Powered Data Acquisition, Test and Measurement Buffer TLV2461CP Texas Instruments Ginagamit sa: Portable Sensor Signal Conditioning, Low-Voltage Active Filter, Industrial Control Signal Amplifier, Test and Measurement Buffer TLV2461CPE4 Same-package ordering alternative Ginagamit sa: Portable Audio Output Stage, Battery-Powered Data Acquisition
What is the operating voltage of TLV2461IP?
The TLV2461IP is specified for operation from a single 6 V supply. According to the Texas Instruments TLV2461 product information, it is a single-channel, 6 V, rail-to-rail input/output operational amplifier. Because the package suffix IP identifies the 8-PDIP version, engineers should confirm the complete ordering information and operating limits in the manufacturer datasheet before using the part outside its specified supply range.
What are the key specifications of TLV2461IP that engineers should know?
The TLV2461IP is a single operational amplifier with a 6 V supply rating, 6.4 MHz gain-bandwidth product, rail-to-rail input and output operation, and an 8-PDIP package. Texas Instruments identifies the TLV2461 family as low-power, rail-to-rail input/output amplifiers for portable applications. These headline specifications make the device suitable for low-voltage signal conditioning, filtering, and level-shifting work where near-rail signal swing is valuable.
Where can I download the TLV2461IP datasheet PDF?
The TLV2461IP datasheet is available through the Texas Instruments TLV2461 product page and the linked manufacturer documentation. The official product page is the best starting point because it connects the exact TLV2461 ordering information, data sheet, application information, and lifecycle resources. Use the pin-description table and ordering-information section to confirm that the IP suffix corresponds to the required 8-PDIP package.
Where can I find the TLV2461IP pinout?
The TLV2461IP pinout is shown in the pin-configuration portion of the manufacturer datasheet for the TLV2461 family. The device uses eight pins in a plastic DIP, and engineers should use the datasheet diagram when assigning the positive input, negative input, output, supply rails, and any shutdown or no-connect positions. Package drawings alone are insufficient because they may not identify every functional pin.
Is TLV2461IP rail-to-rail?
Yes, the TLV2461IP has rail-to-rail input and output operation. According to the Texas Instruments TLV2461 product information, it is an RRIO operational amplifier rated for 6 V and 6.4 MHz. Rail-to-rail inputs are valuable when sensing close to either supply rail, while rail-to-rail output improves usable signal range; actual offset and output-swing limits must still be evaluated from the datasheet.
Where can I buy TLV2461IP online?
Use the Request a Quote form on this page to request TLV2461IP availability, order quantity, and current commercial terms. The form is the appropriate route for obtaining a current quotation and lead-time confirmation for the exact 8-PDIP ordering code. Confirm the package suffix, mounting style, and quantity before approving a shipment.
What is the price of TLV2461IP?
The current TLV2461IP price is not published on this page because commercial pricing can change by quantity, market conditions, and requested packaging. Submit the exact MPN and required quantity through the Request a Quote form on this page. The request should specify TLV2461IP, the 8-PDIP package, and any required date or lot controls for production use.
What is the lead time for TLV2461IP?
Current TLV2461IP lead time should be requested through the Request a Quote form on this page rather than assumed from a historical catalog record. Include the required order quantity, target delivery date, and acceptable date-code policy in the request. Engineers should not schedule production around an unconfirmed lead time, particularly when the exact package and traceable-document requirements must be preserved.
Is TLV2461IP in stock?
Stock status for the exact TLV2461IP should be confirmed through the Request a Quote form on this page. The form allows the required quantity and purchasing conditions to be checked without relying on a generic listing. For production planning, request a supply commitment and include the desired delivery date, because nominal device availability does not by itself guarantee allocation or lot-level continuity.
What is the best drop-in replacement for TLV2461IP?
The closest same-footprint options identified are TLV2461AIP and TLV2461CP because they retain the 8-PDIP form used by TLV2461IP. The TLV2461AIP retains the headline 6 V and 6.4 MHz ratings, while TLV2461CP is also an 8-PDIP ordering variant. Before replacement, verify the exact pin functions, temperature grade, offset limits, shutdown behavior, and lifecycle status against the manufacturer datasheet.
Can TLV2461CP replace TLV2461IP?
TLV2461CP can serve as a board-level replacement candidate because it is identified as an 8-PDIP operational amplifier and is closely related to the TLV2461 family. Compatibility is still conditional: the engineer must compare the complete ordering table, electrical limits, temperature range, and pin functions for the exact CP suffix. The published family headline specifications remain 6 V and 6.4 MHz.
When should I choose TLV2461IP over TLV2461AIP?
Choose TLV2461IP when its exact orderable specifications, temperature grade, and lifecycle conditions match the design better than the A revision. TLV2461AIP is the closest same-package alternative because it retains the 6 V, 6.4 MHz, and 8-PDIP headline characteristics. The decision should be based on the complete manufacturer ordering table rather than the suffix alone, including offset, supply-current, and qualification details.
Is TLV2461IP suitable for low-voltage sensor interfaces?
The TLV2461IP is suitable for many low-voltage sensor-interface applications because it combines a 6 V supply rating, 6.4 MHz gain-bandwidth product, and rail-to-rail input/output behavior. Those characteristics support sensor signals that operate near a supply rail and permit filtering or level shifting without immediate rail clipping. The source impedance, bias current, offset, and noise must be checked against the sensor output.
TLV2461IP vs TLV2461AIP: which is better for portable instrumentation?
TLV2461AIP is the closest same-package alternative to TLV2461IP because both are associated with the 8-PDIP TLV2461 family and share the published 6 V and 6.4 MHz headline specifications. For portable instrumentation, select the variant whose exact temperature grade, offset, bias-current, shutdown, and lifecycle specifications satisfy the system requirements. The IP version is preferable when the original device has already been qualified.
What is the best Texas Instruments equivalent for TLV2461IP?
The best same-manufacturer equivalents identified are TLV2461AIP and TLV2461CP because they use the same 8-PDIP package class as TLV2461IP. TLV2461AIP retains the 6 V and 6.4 MHz family ratings, while TLV2461CP is another closely related 8-PDIP ordering option. Confirm pin-by-pin and characteristic-by-characteristic compatibility before treating either part as a drop-in replacement.

Impormasyon ng Talumpati sa Engineering for TLV2461IP — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose TLV2461IP for a low-voltage, single-amplifier design that requires a 6 V-class supply, 6.4 MHz gain-bandwidth product, and rail-to-rail input/output behavior in an 8-PDIP package. It is especially relevant to portable sensing, active filtering, audio buffering, and compact test equipment where signal headroom near the supply rails matters. TLV2461AIP is the closest same-family alternative when its exact ordering, temperature, and electrical details better match the production plan. TLV2461CP and TLV2461CPE4 are closely related 8-PDIP ordering candidates, but each must be checked against the complete manufacturer ordering table before substitution. Because a shared package alone does not prove functional interchangeability, compare shutdown behavior, input and output limits, offset, bias current, supply current, noise, temperature range, and lifecycle status. For an existing qualified design, retaining TLV2461IP generally minimizes requalification risk; use an alternative only after reviewing its exact datasheet characteristics.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto TLV2461AIP TLV2461CP TLV2461CPE4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-PDIP 8-PDIP 8-PDIP 8-PDIP
Amplifier Type Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit
Supply Voltage Rating 6 V 6 V 6 V 6 V
Gain-Bandwidth Product 6.4 MHz 6.4 MHz 6.4 MHz 6.4 MHz
Input Common-Mode Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Output Swing Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Mounting Type Through-hole Through-hole Through-hole Through-hole

Pangunahing mga Pagkakaiba

  • Combines a 6 V supply rating with a 6.4 MHz gain-bandwidth product (kumpara saTLV2461CP)
  • Provides the same 8-PDIP footprint and 6 V operating class (kumpara saTLV2461AIP)
  • Retains single-amplifier rail-to-rail input/output operation (kumpara saTLV2461CPE4)

Talaan ng Disenyo

Place the power-supply bypass capacitor immediately adjacent to the V+ and V- pins, and keep the amplifier input, feedback, and output traces away from switching-node and high-current return paths. The 8-PDIP footprint provides generous physical spacing, but trace geometry still matters because input capacitance and coupled current can affect a rail-to-rail amplifier's noise and stability. Use a common ground reference for input and output when handling bipolar or single-supply signals.

Do not interpret the 6 V rating as permission to operate from an unrestricted supply. Check the complete recommended operating conditions, absolute maximum ratings, input common-mode range, and output-swing limits in the manufacturer datasheet. Rail-to-rail inputs and outputs reduce headroom requirements but do not eliminate the need to preserve voltage margin for offset, load current, temperature, and transient behavior.

For sensor and active-filter circuits, keep high-impedance input routes short and minimize parasitic capacitance on IN+ and IN-. If the source impedance is high, calculate the bias-current and thermal-noise contribution before choosing the gain. Feedback components should be positioned close to the amplifier, and the output should be isolated from capacitive loads unless the stability requirements for that load have been verified.

Treat the V+ and V- pins as a single-supply or dual-supply implementation according to the manufacturer instructions, but do not connect either rail outside the stated operating limits. Verify the amplifier's supply-current requirement and the temperature rise associated with the selected package under worst-case load. Local decoupling helps control supply impedance, while a stable, low-impedance ground reference prevents output disturbance from appearing as input noise.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The TLV2461IP is a general-purpose commercial operational amplifier; the documented product information does not identify an automotive qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact orderable suffix and current manufacturer declarations.

Data napatotohanan sa: 2026-11-15 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

TLV2461IP datasheet TLV2461IP pinout TLV2461IP datasheet pdf TLV2461IP equivalent TLV2461IP replacement TLV2461IP cross reference TLV2461IP vs TLV2461AIP TLV2461IP footprint TLV2461IP application circuit Texas Instruments TLV2461IP TLV2461IP 6V RRIO op amp TLV2461IP 6.4MHz amplifier TLV2461IP 8-PDIP TLV2461IP price TLV2461IP stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments TLV2461IP TLV2461AIP TLV2461CP TLV2461CPE4 TLV2461 operational amplifier single operational amplifier rail-to-rail input/output amplifier RRIO analog amplifier IC signal-conditioning IC semiconductor 6 V power supply 6.4 MHz gain-bandwidth product rail-to-rail input rail-to-rail output 8-PDIP plastic dual in-line package through-hole package low-voltage instrumentation portable sensor interface active filter ADC interface SHDN shutdown input
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ