TMS320C6455BCTZ - 1GHz C64x+ DSP with 1Gbps Ethernet | TI
MPN: TMS320C6455BCTZ ✓ NakahandaTMS320C6455BCTZ Ulas
A digital signal processor is a programmable semiconductor optimized for operations commonly used in communications, audio, industrial control, and image processing. Unlike a general-purpose CPU, the C64x+ architecture provides a highly parallel execution model with eight instructions per cycle and dedicated hardware for high-throughput fixed-point workloads. Within the broader hierarchy, a DSP is a processor, an embedded processor, and ultimately a semiconductor designed for computationally intensive real-time data streams.
Key features include a C64x+ core, support for 32-bit and 16-bit DDR2 memory, a 64-bit external memory interface, and integrated 1 Gbps Ethernet connectivity. The 64-bit EMIFA provides a high-bandwidth path for external memory and peripheral interfaces, while the dedicated Ethernet interface reduces the need for a separate network controller in connected processing systems. The large 697-pin FCBGA also exposes the device's extensive high-speed interface set.
The processor operates at up to 1.2 GHz in the TMS320C6455 family, while the TMS320C6455BCTZ distributor configuration is identified as a 1 GHz part. Its architecture is intended for parallel fixed-point signal-processing algorithms, including filtering, transforms, packet processing, and multimedia workloads. Exact clock, memory, and I/O timing configuration must follow the device data sheet and hardware design guidance for the selected operating conditions.
Typical uses include industrial communications equipment, Ethernet-connected signal-processing systems, audio and speech processing, test and measurement instruments, and embedded control systems that require deterministic high-throughput computation. The integrated 1 Gbps Ethernet interface is especially useful when the processor must process real-time data arriving over a network without offloading all connectivity functions to a separate controller.
PCB implementation requires careful power delivery, high-speed routing, and thermal management around the 697-pin FCBGA. Use the manufacturer's pin-assignment table and reference design when assigning power, ground, clock, DDR2, EMIFA, and Ethernet signals. Differential Ethernet and memory routes require continuous return paths, controlled impedance, and placement that minimizes crosstalk and timing skew.
This page combines the manufacturer architecture and ordering information with practical pin-assignment, interface-selection, and replacement guidance. It also distinguishes confirmed same-footprint options from unavailable cross-brand equivalents, helping engineers assess PCB reuse, software continuity, thermal constraints, and production sourcing before committing to a design.
Mga alternatibo na pwedeng ilagay na TMS320C6455BCTZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok TMS320C6455BCTZ (parehas na form factor at footprint) — pagkakaiba sa Package.
TMS320C6455BCTZA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
TMS320C6455BGTZA
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
TMS320C6455BZTZA
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
TMS320C6455BGTZ
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →TMS320C6455BZTZ
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
TMS320C6455BCTZ Mga Spesipikasyon
| Device Type | Fixed-point digital signal processor (DSP) |
| Processor Core | TMS320C64x+ DSP core |
| Target Clock Frequency | 1 GHz |
| Family Maximum Clock Frequency | Up to 1.2 GHz |
| Instruction Execution | Eight 32-bit instructions per cycle |
| External Memory Interface | 64-bit EMIFA |
| DDR2 Interface | 32-bit and 16-bit DDR2 |
| Ethernet Speed | 1 Gbps |
| Packhaging | 697-pin FCBGA (CTZ), 24 x 24 mm |
| Hanay ng Temperature na Operasyon | 0 °C to 90 °C |
| Uri ng Pagpapasok | Surface mount |
| Lead-Free Packaging Status | Pb-free die bump and solder-ball construction for the CTZ package |
| Nominal Instruction Time | 1 ns at 1 GHz |
| Peak Fixed-Point Throughput | 8 billion 16-bit MACs per second at 1 GHz |
Gabay sa Pin Configuration ng TMS320C6455BCTZ 697-pin fcbga (ctz), 24 x 24 mm
Pin configuration para sa TMS320C6455BCTZ (697-pin fcbga (ctz), 24 x 24 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa TMS320C6455BCTZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
TMS320C6455BCTZ ay nararapat para sa 6 aplikasyons: Industrial Ethernet Signal Processing, Network Voice and Audio Processing, Communications Baseband Processing, Test and Measurement Instrumentation, Industrial Control and Automation, Embedded Multimedia Processing.
Industrial Ethernet Signal Processing
The TMS320C6455BCTZ fits industrial gateways and network-connected controllers that must process high-rate fixed-point data while communicating over Ethernet. Its C64x+ core executes up to eight 32-bit instructions per cycle, and the dedicated 1 Gbps Ethernet interface supports network data transfer without requiring a separate Ethernet controller. The 64-bit EMIFA and 32-bit or 16-bit DDR2 interfaces provide parallel access to external memory for packet buffers and algorithm workspaces. The principal design constraint is that the 697-pin FCBGA requires careful layer allocation, solid power distribution, and controlled routing for Ethernet and memory interfaces.
Inirekomenda
Network Voice and Audio Processing
The TMS320C6455BCTZ is appropriate for voice gateways, audio codecs, and communications equipment that combines real-time fixed-point processing with Ethernet transport. Its eight-way parallel instruction execution supports filters and transforms efficiently, while DDR2 interfaces supply the bandwidth required by multichannel buffers. The integrated 1 Gbps Ethernet capability can move compressed or uncompressed audio packets between the processor and a network endpoint. For production designs, clock jitter, memory timing, Ethernet signal integrity, and thermal rise around the 697-pin FCBGA must be verified before release.
Inirekomenda
Communications Baseband Processing
The C64x+ architecture and 1 GHz clock make TMS320C6455BCTZ suitable for fixed-point baseband functions in communications equipment. Eight parallel 32-bit instruction slots accelerate filtering, correlation, spectrum processing, and packet-buffer manipulation, while the 64-bit EMIFA provides a broad data path to external memories and accelerators. The 1 Gbps Ethernet interface adds a direct path for control and data traffic. Because the processor is supplied in a large 697-pin FCBGA, PCB complexity and assembly cost are higher than for a smaller package, making footprint reuse important when replacing an earlier TMS320C6455 implementation.
Inirekomenda
Test and Measurement Instrumentation
TMS320C6455BCTZ can serve as the real-time processing engine in signal analyzers, waveform processors, communication test sets, and automated measurement platforms. The C64x+ core provides high fixed-point throughput for digital filtering and calibration, and the flexible EMIFA supports external memory and test-data movement. Its Ethernet interface enables remote control and high-rate result transfer. System planners should account for the processor's 697-ball interconnect, provide multiple stable supply rails, and validate thermal performance under sustained computational load. Software migration also requires preserving the same timing, cache, and peripheral configurations as the original design.
Inirekomenda
Industrial Control and Automation
The TMS320C6455BCTZ is suitable for motion, control, and automation modules where fixed-point calculations must run deterministically alongside network communication. Parallel C64x+ execution accelerates filtering and feedback algorithms, and the 64-bit EMIFA allows deterministic access to external data and control hardware. The 0 °C to 90 °C rating fits many industrial equipment environments when the enclosure controls heat dissipation. A robust implementation needs independent rail sequencing, brownout behavior appropriate to the safety system, and a thermal strategy for the large FCBGA rather than relying on a quiet laboratory supply.
Inirekomenda
Embedded Multimedia Processing
TMS320C6455BCTZ can accelerate embedded multimedia workloads that require predictable fixed-point execution and extensive external-memory bandwidth. The 64-bit EMIFA and dedicated DDR2 paths support frame buffers, coefficients, and streaming data, while the C64x+ core performs eight 32-bit operations per cycle. The Ethernet interface provides a practical route for command exchange, diagnostics, and media transport in networked imaging or communication equipment. Board design should use short, impedance-controlled memory routes and isolate Ethernet and memory interfaces from switching supplies to prevent data corruption under simultaneous high-bandwidth activity.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for TMS320C6455BCTZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | TMS320C6455BCTZA | TMS320C6455BGTZA | TMS320C6455BZTZA | TMS320C6455BGTZ | TMS320C6455BZTZ |
|---|---|---|---|---|---|---|
| Package | 697-pin FCBGA (CTZ), 24 x 24 mm | 697-pin FCBGA (CTZ), 24 x 24 mm | 697-pin FCBGA (GTZ), 24 x 24 mm | 697-pin FCBGA (ZTZ), 24 x 24 mm | 697-pin FCBGA (GTZ), 24 x 24 mm | 697-pin FCBGA (ZTZ), 24 x 24 mm |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Processor Core | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP |
Pangunahing mga Pagkakaiba
- Retains the established 697-pin CTZ board footprint (kumpara saTMS320C6455BGTZA)
- Combines fixed-point processing and network connectivity in one device (kumpara saTMS320C6455BZTZA)
- Provides a Pb-free CTZ package construction (kumpara saTMS320C6455BGTZA)
- Supports deterministic parallel fixed-point processing (kumpara saTMS320C6455BCTZA)
Talaan ng Disenyo
Assign the 697 FCBGA balls into separate power, ground, DDR2, EMIFA, Ethernet, clock, and control groups before routing begins. Place input and bulk decoupling capacitance close to the associated supply balls, use uninterrupted ground planes beneath the package, and avoid splitting return paths beneath high-speed interfaces. Follow the Texas Instruments layout recommendations for escape traces and layer transitions to avoid discontinuities that degrade signal integrity.
Estimate worst-case dissipation by summing the power consumed by the C64x+ core and each active I/O rail, then multiply current by the actual supply voltage. Add regulator loss and apply the package and board thermal model for the installed PCB. The 697-pin FCBGA can concentrate heat around the die, so preserve the recommended via pattern under the package and verify junction temperature under sustained maximum-throughput operation.
Treat DDR2 and 1 Gbps Ethernet as high-speed interfaces rather than ordinary short digital signals. Match trace lengths to the applicable processor and memory interface requirements, maintain continuous reference planes, control Z0 through stackup changes, and place termination and protection devices where the interface guidance specifies them. Validate the final board with eye diagrams or equivalent measurements because simulation alone may not capture connector, package, and component-tolerance effects.
Do not substitute CTZ, GTZ, or ZTZ ordering options solely because the ball count appears identical. Confirm the exact frequency grade, temperature range, silicon revision, package-ball material, power sequence, and software assumptions before release. A pin-compatible package preserves PCB connectivity, but it does not by itself guarantee equivalent ordering status, qualification, or production behavior.
Impormasyon ng Pagsunod sa Kautusan
Texas Instruments support information identifies CTZ as a Pb-free die-bump and solder-ball construction. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the product's current environmental or material declaration.