TMS320C6455BCTZ - 1GHz C64x+ DSP with 1Gbps Ethernet | TI
MPN: TMS320C6455BCTZ ✓ Hoạt độngTMS320C6455BCTZ Tóm tắt
A digital signal processor is a programmable semiconductor optimized for operations commonly used in communications, audio, industrial control, and image processing. Unlike a general-purpose CPU, the C64x+ architecture provides a highly parallel execution model with eight instructions per cycle and dedicated hardware for high-throughput fixed-point workloads. Within the broader hierarchy, a DSP is a processor, an embedded processor, and ultimately a semiconductor designed for computationally intensive real-time data streams.
Key features include a C64x+ core, support for 32-bit and 16-bit DDR2 memory, a 64-bit external memory interface, and integrated 1 Gbps Ethernet connectivity. The 64-bit EMIFA provides a high-bandwidth path for external memory and peripheral interfaces, while the dedicated Ethernet interface reduces the need for a separate network controller in connected processing systems. The large 697-pin FCBGA also exposes the device's extensive high-speed interface set.
The processor operates at up to 1.2 GHz in the TMS320C6455 family, while the TMS320C6455BCTZ distributor configuration is identified as a 1 GHz part. Its architecture is intended for parallel fixed-point signal-processing algorithms, including filtering, transforms, packet processing, and multimedia workloads. Exact clock, memory, and I/O timing configuration must follow the device data sheet and hardware design guidance for the selected operating conditions.
Typical uses include industrial communications equipment, Ethernet-connected signal-processing systems, audio and speech processing, test and measurement instruments, and embedded control systems that require deterministic high-throughput computation. The integrated 1 Gbps Ethernet interface is especially useful when the processor must process real-time data arriving over a network without offloading all connectivity functions to a separate controller.
PCB implementation requires careful power delivery, high-speed routing, and thermal management around the 697-pin FCBGA. Use the manufacturer's pin-assignment table and reference design when assigning power, ground, clock, DDR2, EMIFA, and Ethernet signals. Differential Ethernet and memory routes require continuous return paths, controlled impedance, and placement that minimizes crosstalk and timing skew.
This page combines the manufacturer architecture and ordering information with practical pin-assignment, interface-selection, and replacement guidance. It also distinguishes confirmed same-footprint options from unavailable cross-brand equivalents, helping engineers assess PCB reuse, software continuity, thermal constraints, and production sourcing before committing to a design.
Bộ thay thế dễ dàng lắp đặt cho TMS320C6455BCTZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với TMS320C6455BCTZ (cùng hình factor và footprint) — khác nhau ở Package.
TMS320C6455BCTZA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TMS320C6455BGTZA
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
TMS320C6455BZTZA
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TMS320C6455BGTZ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →TMS320C6455BZTZ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
TMS320C6455BCTZ Thông số kỹ thuật
| Device Type | Fixed-point digital signal processor (DSP) |
| Processor Core | TMS320C64x+ DSP core |
| Target Clock Frequency | 1 GHz |
| Family Maximum Clock Frequency | Up to 1.2 GHz |
| Instruction Execution | Eight 32-bit instructions per cycle |
| External Memory Interface | 64-bit EMIFA |
| DDR2 Interface | 32-bit and 16-bit DDR2 |
| Ethernet Speed | 1 Gbps |
| Hộp | 697-pin FCBGA (CTZ), 24 x 24 mm |
| Khoảng nhiệt độ hoạt động | 0 °C to 90 °C |
| Kiểu lắp đặt | Surface mount |
| Lead-Free Packaging Status | Pb-free die bump and solder-ball construction for the CTZ package |
| Nominal Instruction Time | 1 ns at 1 GHz |
| Peak Fixed-Point Throughput | 8 billion 16-bit MACs per second at 1 GHz |
Hướng dẫn cấu hình chân TMS320C6455BCTZ 697-pin fcbga (ctz), 24 x 24 mm
Cấu hình chân cho TMS320C6455BCTZ (697-pin fcbga (ctz), 24 x 24 mm gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho TMS320C6455BCTZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
TMS320C6455BCTZ phù hợp cho 6 Áp dụngs: Industrial Ethernet Signal Processing, Network Voice and Audio Processing, Communications Baseband Processing, Test and Measurement Instrumentation, Industrial Control and Automation, Embedded Multimedia Processing.
Industrial Ethernet Signal Processing
The TMS320C6455BCTZ fits industrial gateways and network-connected controllers that must process high-rate fixed-point data while communicating over Ethernet. Its C64x+ core executes up to eight 32-bit instructions per cycle, and the dedicated 1 Gbps Ethernet interface supports network data transfer without requiring a separate Ethernet controller. The 64-bit EMIFA and 32-bit or 16-bit DDR2 interfaces provide parallel access to external memory for packet buffers and algorithm workspaces. The principal design constraint is that the 697-pin FCBGA requires careful layer allocation, solid power distribution, and controlled routing for Ethernet and memory interfaces.
Được đề xuất
Network Voice and Audio Processing
The TMS320C6455BCTZ is appropriate for voice gateways, audio codecs, and communications equipment that combines real-time fixed-point processing with Ethernet transport. Its eight-way parallel instruction execution supports filters and transforms efficiently, while DDR2 interfaces supply the bandwidth required by multichannel buffers. The integrated 1 Gbps Ethernet capability can move compressed or uncompressed audio packets between the processor and a network endpoint. For production designs, clock jitter, memory timing, Ethernet signal integrity, and thermal rise around the 697-pin FCBGA must be verified before release.
Được đề xuất
Communications Baseband Processing
The C64x+ architecture and 1 GHz clock make TMS320C6455BCTZ suitable for fixed-point baseband functions in communications equipment. Eight parallel 32-bit instruction slots accelerate filtering, correlation, spectrum processing, and packet-buffer manipulation, while the 64-bit EMIFA provides a broad data path to external memories and accelerators. The 1 Gbps Ethernet interface adds a direct path for control and data traffic. Because the processor is supplied in a large 697-pin FCBGA, PCB complexity and assembly cost are higher than for a smaller package, making footprint reuse important when replacing an earlier TMS320C6455 implementation.
Được đề xuất
Test and Measurement Instrumentation
TMS320C6455BCTZ can serve as the real-time processing engine in signal analyzers, waveform processors, communication test sets, and automated measurement platforms. The C64x+ core provides high fixed-point throughput for digital filtering and calibration, and the flexible EMIFA supports external memory and test-data movement. Its Ethernet interface enables remote control and high-rate result transfer. System planners should account for the processor's 697-ball interconnect, provide multiple stable supply rails, and validate thermal performance under sustained computational load. Software migration also requires preserving the same timing, cache, and peripheral configurations as the original design.
Được đề xuất
Industrial Control and Automation
The TMS320C6455BCTZ is suitable for motion, control, and automation modules where fixed-point calculations must run deterministically alongside network communication. Parallel C64x+ execution accelerates filtering and feedback algorithms, and the 64-bit EMIFA allows deterministic access to external data and control hardware. The 0 °C to 90 °C rating fits many industrial equipment environments when the enclosure controls heat dissipation. A robust implementation needs independent rail sequencing, brownout behavior appropriate to the safety system, and a thermal strategy for the large FCBGA rather than relying on a quiet laboratory supply.
Được đề xuất
Embedded Multimedia Processing
TMS320C6455BCTZ can accelerate embedded multimedia workloads that require predictable fixed-point execution and extensive external-memory bandwidth. The 64-bit EMIFA and dedicated DDR2 paths support frame buffers, coefficients, and streaming data, while the C64x+ core performs eight 32-bit operations per cycle. The Ethernet interface provides a practical route for command exchange, diagnostics, and media transport in networked imaging or communication equipment. Board design should use short, impedance-controlled memory routes and isolate Ethernet and memory interfaces from switching supplies to prevent data corruption under simultaneous high-bandwidth activity.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho TMS320C6455BCTZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | TMS320C6455BCTZA | TMS320C6455BGTZA | TMS320C6455BZTZA | TMS320C6455BGTZ | TMS320C6455BZTZ |
|---|---|---|---|---|---|---|
| Package | 697-pin FCBGA (CTZ), 24 x 24 mm | 697-pin FCBGA (CTZ), 24 x 24 mm | 697-pin FCBGA (GTZ), 24 x 24 mm | 697-pin FCBGA (ZTZ), 24 x 24 mm | 697-pin FCBGA (GTZ), 24 x 24 mm | 697-pin FCBGA (ZTZ), 24 x 24 mm |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Processor Core | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP | C64x+ fixed-point DSP |
Bảo phân biệt quan trọng
- Retains the established 697-pin CTZ board footprint (vsTMS320C6455BGTZA)
- Combines fixed-point processing and network connectivity in one device (vsTMS320C6455BZTZA)
- Provides a Pb-free CTZ package construction (vsTMS320C6455BGTZA)
- Supports deterministic parallel fixed-point processing (vsTMS320C6455BCTZA)
Ghi chú thiết kế
Assign the 697 FCBGA balls into separate power, ground, DDR2, EMIFA, Ethernet, clock, and control groups before routing begins. Place input and bulk decoupling capacitance close to the associated supply balls, use uninterrupted ground planes beneath the package, and avoid splitting return paths beneath high-speed interfaces. Follow the Texas Instruments layout recommendations for escape traces and layer transitions to avoid discontinuities that degrade signal integrity.
Estimate worst-case dissipation by summing the power consumed by the C64x+ core and each active I/O rail, then multiply current by the actual supply voltage. Add regulator loss and apply the package and board thermal model for the installed PCB. The 697-pin FCBGA can concentrate heat around the die, so preserve the recommended via pattern under the package and verify junction temperature under sustained maximum-throughput operation.
Treat DDR2 and 1 Gbps Ethernet as high-speed interfaces rather than ordinary short digital signals. Match trace lengths to the applicable processor and memory interface requirements, maintain continuous reference planes, control Z0 through stackup changes, and place termination and protection devices where the interface guidance specifies them. Validate the final board with eye diagrams or equivalent measurements because simulation alone may not capture connector, package, and component-tolerance effects.
Do not substitute CTZ, GTZ, or ZTZ ordering options solely because the ball count appears identical. Confirm the exact frequency grade, temperature range, silicon revision, package-ball material, power sequence, and software assumptions before release. A pin-compatible package preserves PCB connectivity, but it does not by itself guarantee equivalent ordering status, qualification, or production behavior.
Thông tin tuân thủ
Texas Instruments support information identifies CTZ as a Pb-free die-bump and solder-ball construction. RoHS, REACH, halogen-free, and conflict-minerals status require confirmation from the product's current environmental or material declaration.