STMicroelectronics

TS925IDT - Quad 80mA Rail-to-Rail Op Amp | STMicroelectronics

MPN: TS925IDT ✓ Nakahanda
3 V to 12 V Vdss 80 mA Id SOIC-16, 16-SO Package
MOQ: 1 |

TS925IDT Ulas

The STMicroelectronics TS925IDT is a four-circuit, rail-to-rail input and output operational amplifier optimized for 3 V and 5 V operation, with an operating supply range extending to 12 V. The device provides a 4 MHz gain-bandwidth product, 1.3 V/us slew rate, 9 nV/Hz input noise, and up to 80 mA of output drive current in an SOIC-16 package.

An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. A rail-to-rail input and output amplifier can operate with input and output voltages close to either supply rail, making it useful in battery-powered, portable, and mixed-signal equipment. The TS925 belongs to the general-purpose operational amplifier family within the broader analog and linear IC hierarchy.

The TS925IDT combines four amplifiers in one package with several features aimed at portable instrumentation. Its rail-to-rail input stage accepts signals across nearly the full supply range, while rail-to-rail output swing supports low-impedance loads. High output current of 80 mA can drive up to 32 loads according to the manufacturer documentation. The 4 MHz bandwidth and 1.3 V/us slew rate improve response speed in audio, sensor, and control paths.

The TS925 also includes standby mode and an adjustable phantom-ground arrangement. The internal low-impedance phantom ground can simplify biasing and eliminate the need for an external reference voltage or bias network in suitable applications. The four amplifiers share one package while retaining independent input and output pins, allowing one component to implement four analog functions.

Typical applications include portable audio and headphone stages, low-voltage sensor conditioning, current measurement, industrial control, and general-purpose instrumentation. The 80 mA output capability is particularly useful when the amplifier must drive heavier loads than a conventional low-power quad amplifier can support. The SOIC-16 package also simplifies assembly and provides adequate pin spacing for production test and inspection.

When designing around the TS925IDT, verify input common-mode range and output swing for the actual load current because rail-to-rail operation does not guarantee perfect saturation at the supply rails. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer's recommended stable input arrangement rather than left floating.

This page combines the TS925IDT operating characteristics with same-package family alternatives, application guidance, comparison parameters, and practical layout notes. These engineering-oriented details help shorten component selection and support design decisions that are not visible in a basic distributor catalog listing.

Mga alternatibo na pwedeng ilagay na TS925IDT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok TS925IDT (parehas na form factor at footprint) — pagkakaiba sa Package, Amplifier Type, Slew Rate, Supply Voltage Range, Number of Amplifiers.

STMicroelectronics
Package: 14-pin Small Outline (SO-14)
Amplifier Type: General-purpose operational amplifier
Slew Rate: 1.3 V/µs
Ikabit sa TS925IDT →
STMicroelectronics
Package: 16-pin SOIC
Amplifier Type: General-purpose operational amplifier
Supply Voltage Range: 2.7 V to 12 V
Ikabit sa TS925IDT →

TS925ID

✅ Drop-In
STMicroelectronics
📦 SOIC-16
4 amplifiers · 4 circuits · General-purpose operational amplifier · Rail-to-rail · Rail-to-rail · 4 MHz · 1.3 V/us · 2.7 V to 12 V

Magkontak para sa presyo

Tingnan ang Datasheet →

TS925ID

✅ Drop-In
STMicroelectronics
📦 SOIC-16
4 amplifiers · 4 circuits · General-purpose operational amplifier · Rail-to-rail · Rail-to-rail · 4 MHz · 1.3 V/us · 2.7 V to 12 V

Magkontak para sa presyo

Tingnan ang Datasheet →

TS924IDT

✅ Drop-In
STMicroelectronics
📦 SOIC-16
4 · General-purpose operational amplifier · BiCMOS · Input and output · 2.7 V to 12 V · 3 V and 5 V · 4 MHz · 1.3 V/µs

Magkontak para sa presyo

Tingnan ang Datasheet →

TS925IDT Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Quad general-purpose operational amplifier
Number of Circuits 4 circuits
Rail-to-Rail Input Yes
Rail-to-Rail Output Yes
Supply Voltage Range 3 V to 12 V
Optimized Supply Voltage 3 V and 5 V
Gain-Bandwidth Product 4 MHz
Slew Rate 1.3 V/us
Input Noise Density 9 nV/Hz
Output Current 80 mA
Load Drive Capability Up to 32 loads
Low Distortion Supported
Low Input Offset Voltage Specified in the manufacturer datasheet
Standby Mode Yes
Phantom Ground Adjustable, internal low-impedance phantom ground
Packhaging SOIC-16, 16-SO
Uri ng Pagpapasok Surface mount
Tindminan RoHS RoHS details listed by part distributors

Gabay sa Pin Configuration ng TS925IDT soic-16, 16-so

Pin configuration para sa TS925IDT (soic-16, 16-so package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng soic-16, 16-so package para sa TS925IDT

Wala ng detalyadong pinout data na magagamit para sa TS925IDT.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

TS925IDT ay nararapat para sa 6 aplikasyons: Portable Audio and Headphone Drive, Low-Voltage Sensor Signal Conditioning, Industrial Control and Instrumentation, Current Measurement with Shunt Sensor, Battery-Powered Portable Equipment, Audio Distribution and Line Buffering.

🎧

Portable Audio and Headphone Drive

The TS925IDT fits portable audio paths because its rail-to-rail output stage operates near the supply rails while delivering up to 80 mA of output current. A designer can use the four channels for a headphone driver, line amplifier, mixer, and output-buffer stage in a 3.3 V or 5 V system. The 1.3 V/us slew rate provides faster edge control than slow general-purpose amplifiers, while the 4 MHz bandwidth supports audio-band signals. The important trade-off is power: continuous high-current operation into a low-impedance load increases dissipation, so the load current and amplifier output stage should be checked against the manufacturer's thermal and current limits.

🧩

Low-Voltage Sensor Signal Conditioning

The TS925IDT is appropriate for conditioning low-voltage sensor outputs because its rail-to-rail input stage accepts signals near the supply rails and its low 9 nV/Hz input noise supports high-resolution measurements. Four independent amplifiers can condition bridge, temperature, pressure, or current-sensor channels without requiring four separate packages. In a 3.3 V or 5 V acquisition system, place input filtering close to the pins and observe the input-common-mode limits for each selected amplifier configuration. The adjustable phantom-ground feature can simplify biasing arrangements in suitable circuits, reducing the need for an external low-impedance reference network.

🏭

Industrial Control and Instrumentation

The TS925IDT can be used in industrial control and instrumentation circuits that operate from a 3 V, 5 V, or nominal 12 V supply. Its four channels allow a compact implementation of error amplifiers, transimpedance stages, actuator drivers, and signal-conditioning channels in one SOIC-16 package. The 80 mA output-current capability is valuable when driving a control input or low-impedance intermediate stage rather than only a high-impedance feedback network. Designers should verify supply-current behavior and thermal rise at the selected operating temperature, and should use stable compensation or noise-gain configurations appropriate for the capacitive load presented by the driven circuit.

⚡

Current Measurement with Shunt Sensor

The TS925IDT can amplify the voltage generated across a low-value current shunt when its input noise and rail-to-rail common-mode range match the measurement resolution. One amplifier channel performs the differential shunt gain stage while the remaining channels can provide offset, filtering, or level shifting. The 4 MHz bandwidth is adequate for many fast current transients, and the 1.3 V/us slew rate helps preserve pulse edges without adding an external buffer. For high-side shunt sensing, however, a dedicated current-sense amplifier may provide better common-mode rejection and integrated current-path handling than a general-purpose operational amplifier.

📱

Battery-Powered Portable Equipment

The TS925IDT is suitable for battery-powered equipment that uses a 3 V or 5 V rail because its input and output stages operate close to the supply limits. Rail-to-rail sensing helps preserve signal range in compact systems where the available headroom is limited, while the standby function can disable selected activity to reduce system demand. The four-channel integration also reduces board area compared with four separate single amplifiers. Designers must still account for supply current across all four channels, confirm that the standby-control state matches the system's sequencing requirements, and verify that the output remains in the usable region at light and heavy loads.

🎵

Audio Distribution and Line Buffering

The TS925IDT can serve as an active line buffer or low-impedance distribution amplifier in professional and consumer audio boards. Its 80 mA output capability provides more drive than a typical low-power quad amplifier, and the low 9 nV/Hz input noise supports quiet amplification of low-level audio signals. Four channels can drive several short cable or buffer inputs, provided each load remains within the output-current and stability limits. The 4 MHz bandwidth is more than adequate for baseband audio, while the 1.3 V/us slew rate helps reproduce transients cleanly. Maintain short output traces and terminate unused channels according to the manufacturer guidance.

What is the TS925IDT used for?
The TS925IDT is a four-channel, rail-to-rail input and output operational amplifier used for low-voltage analog signal conditioning. According to the STMicroelectronics TS925 datasheet, it combines 4 MHz bandwidth, 1.3 V/us slew rate, 9 nV/Hz input noise, and an 80 mA output-current capability in one SOIC-16 package. Its four independent channels make it suitable for portable measurement, audio, sensor interfaces, and industrial control circuits.
What is the operating voltage of the TS925IDT?
The TS925IDT operates from 3 V to 12 V and is specifically optimized for 3 V and 5 V systems. The manufacturer describes it as a low-voltage BiCMOS quad operational amplifier with rail-to-rail input and output stages. When designing a 3.3 V or 5 V circuit, verify output-headroom and common-mode limits in the manufacturer datasheet for the load and output voltage being used.
Where can I download the TS925IDT datasheet PDF?
The official TS925IDT datasheet is available from STMicroelectronics at the manufacturer datasheet link on this page. It is titled for the TS925 series and describes a rail-to-rail high-output-current quad operational amplifier with standby mode and adjustable phantom ground. Use the STMicroelectronics document for authoritative pin assignments, electrical limits, timing information, and application guidance.
Where can I find the TS925IDT pinout?
The TS925IDT pinout is defined in the pin-configuration section of the STMicroelectronics TS925 manufacturer datasheet. The device uses a 16-lead SOIC package containing four complete operational-amplifier channels, power pins, standby control, and phantom-ground-related connections. Use the datasheet pin-description table when assigning PCB tracks and do not infer unused or special-function pins from a generic quad-op-amp footprint.
What are the key specifications of TS925IDT that engineers should know?
The principal TS925IDT specifications are four amplifier channels, 3 V to 12 V operation, 4 MHz gain-bandwidth product, 1.3 V/us slew rate, 9 nV/Hz input noise, rail-to-rail input and output stages, and 80 mA output drive. The STMicroelectronics datasheet also identifies standby mode, adjustable phantom ground, low distortion, and operation optimized for 3 V and 5 V supplies.
How much output current can the TS925IDT drive?
The TS925IDT can source or sink up to 80 mA and is specified to drive up to 32 loads according to the manufacturer documentation. This output capability exceeds that of many general-purpose low-power quad amplifiers. Actual usable current still depends on output voltage, supply voltage, temperature, load impedance, and the amplifier's stability configuration, so those limits should be checked in the datasheet.
Is the TS925IDT rail-to-rail?
Yes, the TS925IDT has rail-to-rail input and output operation. The rail-to-rail input stage permits sensing signals close to the supply rails, and the output stage can operate close to both rails under suitable loading conditions. Rail-to-rail does not mean the output reaches the exact rail voltage, so designers should retain the output-swing headroom specified by STMicroelectronics.
Can the TS925IDT drive headphones or other low-impedance loads?
The TS925IDT is suitable for driving moderate low-impedance loads because its output stage can deliver 80 mA. It is commonly considered for portable audio, line-driver, and low-impedance amplifier tasks where a low-power quad op amp would be marginal. Check the load impedance, output-current limit, thermal dissipation, and crossover-distortion behavior against the datasheet for the exact headphone or transducer being used.
What is the difference between TS925IDT and TS925ID?
The TS925IDT and TS925ID belong to the same STMicroelectronics TS925 family and are listed in 16-pin SOIC-compatible catalog entries. The distinction is the manufacturer ordering suffix rather than a change in the core quad-amplifier architecture. For an exact board substitution, confirm package, temperature grade, qualification status, and order codes against the manufacturer datasheet before releasing the design for production.
What is the best drop-in replacement for TS925IDT?
The closest drop-in options identified within the TS925 family are TS925ID and TS925I because they use the same SOIC-16 package and the same quad rail-to-rail amplifier architecture. The TS924IDT is a related STMicroelectronics single-supply quad amplifier family, but its standby and phantom-ground functions differ, so pin-level verification is essential before substitution. This page also explains which candidates were confirmed for engineering review.
Can TS925IDT replace TS924IDT in an existing design?
TS925IDT may be considered for a TS924IDT redesign because both are STMicroelectronics single-supply quad operational amplifiers in SOIC-16 packages, but they are not automatically interchangeable. The TS925 provides standby mode and an adjustable phantom-ground arrangement that are not functionally identical to the TS924 feature set. Review every pin in the manufacturer pin tables and confirm standby-state behavior, biasing, and output-drive expectations.
When should I choose TS925IDT instead of a conventional LM324?
Choose the TS925IDT instead of a conventional LM324 when the design needs rail-to-rail input sensing, rail-to-rail output swing, substantially higher output drive, or faster 4 MHz operation. The TS925IDT provides 80 mA output capability and 1.3 V/us slew rate, while a common LM324 is intended for lower-cost, lower-current applications. The TS925 also adds standby mode and an adjustable phantom-ground function.
Is TS925IDT suitable for a 3.3 V sensor-conditioning circuit?
The TS925IDT is suitable for 3.3 V sensor-conditioning systems because it is optimized for 3 V and 5 V operation and supports a 3 V to 12 V supply range. Its rail-to-rail input stage is useful when sensor output levels approach the positive or negative rail. Confirm the selected amplifier's input-common-mode range, output swing, and bias-current requirements in the manufacturer datasheet.
Where can I buy TS925IDT online?
Use the Request a Quote form on this page to request TS925IDT availability, unit pricing, quantity breaks, and current lead time from XAIPART. The part is a four-channel SOIC-16 operational amplifier, and the quote team can confirm the required package, operating-grade suffix, and production quantity for your assembly schedule.
What is the lead time for TS925IDT?
Current TS925IDT lead time depends on manufacturer inventory, the exact order code, and the requested production quantity. Submit the MPN and required quantity through the Request a Quote form on this page for a current scheduling response. For time-critical builds, request the latest date code and stocking information in the same quotation rather than relying on a historic catalog lead time.
What can replace TS925IDT?
The most direct replacement candidates are TS925ID and TS925I from the same STMicroelectronics TS925 family, since they retain the SOIC-16 quad-amplifier architecture. TS924IDT is a related alternative with a different feature set and requires careful pin-function review. No cross-brand substitute is asserted here because the cross-reference results did not verify a pin-compatible part with comparable electrical performance.
Is TS925IDT the same as TS924IDT?
No. Both are STMicroelectronics 16-pin SOIC quad operational amplifiers, but they belong to different series with different feature sets. The TS925IDT provides standby mode, an adjustable phantom ground, 80 mA output capability, and 4 MHz bandwidth. The TS924IDT should be treated as a related design requiring schematic, pinout, and stability review rather than an automatic equivalent.

Impormasyon ng Talumpati sa Engineering for TS925IDT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the TS925IDT for a 3 V, 5 V, or nominal 12 V analog design that needs four rail-to-rail amplifiers, low input noise, and as much as 80 mA of output drive. TS925ID and TS925I are the closest same-family choices when the exact ordering suffix differs but the TS925 feature set and electrical behavior remain required; confirm the order-code, temperature-grade, and qualification details before production release. Consider TS924IDT only when its different standby and phantom-ground arrangement is acceptable and every special-function pin has been checked against the original schematic. For designs where rail-to-rail operation or low-impedance drive is unnecessary, a simpler general-purpose amplifier may reduce cost and complexity. Conversely, do not replace the TS925IDT with a low-power quad op amp when the load can draw tens of milliamperes, because the lower output-current capability can cause clipping or distortion.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto TS925ID TS925I TS924IDT
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
Package SOIC-16 SOIC-16 - same SOIC-16 - same SOIC-16 - same
Number of Amplifiers 4 4 4 4
Input and Output Configuration Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output Rail-to-rail input and output
Standby Mode Yes Yes Yes Different special-function configuration
Phantom Ground Adjustable internal low-impedance phantom ground Adjustable internal low-impedance phantom ground Adjustable internal low-impedance phantom ground Different special-function configuration

Pangunahing mga Pagkakaiba

  • High output drive within a four-channel package (kumpara saLM324ADR)
  • Higher speed and lower noise for precision analog paths (kumpara saLM2902N/PB)
  • Standby and phantom-ground functions integrated (kumpara saTS924IDT)

Talaan ng Disenyo

Estimated: with all four amplifiers operating at 80 mA output current, the worst-case load power is P = 4 x 0.08 A x VOUT. At a 5 V output this reaches 1.6 W before accounting for internal bias current, and at 12 V it reaches 3.84 W. Check the SOIC-16 package thermal resistance and the maximum junction temperature in the manufacturer datasheet, because high continuous output current can make the package a significant heat source.

Place the supply bypass capacitor directly between the positive supply and ground pins, with the shortest possible trace and ground connection. Keep input and output traces away from the high-current output nodes, particularly when driving low-impedance loads. The TS925 can switch at 1.3 V/us, so fast output edges couple more readily into adjacent high-impedance inputs than slower amplifiers would.

Do not treat a rail-to-rail input and output amplifier as an exact rail-to-the-rail component. The output still requires headroom, particularly at high current, and the usable input range can depend on the selected amplifier configuration. Do not leave unused amplifier inputs floating; follow the manufacturer's recommended input and bias arrangement. Also verify the standby pin polarity and its effect on all four channels before using the part for power sequencing.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

RoHS information is listed for the TS925IDT by part distributors. Automotive qualification, REACH status, halogen-free status, and conflict-minerals declarations were not confirmed in the manufacturer documentation reviewed for this page.

Data napatotohanan sa: 2026-11-16 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

TS925IDT datasheet TS925IDT pinout TS925IDT datasheet pdf TS925IDT SOIC-16 TS925IDT specifications TS925IDT 4MHz 1.3V/us TS925IDT 80mA output current STMicroelectronics TS925IDT TS925IDT drop-in replacement TS925IDT vs TS924IDT TS925IDT equivalent amplifier TS925IDT price TS925IDT stock TS925IDT audio amplifier TS925IDT sensor conditioning

Mga kaugnay na Mga Komponente at mga Tuntunin

STMicroelectronics TS925IDT TS925ID TS925I TS924IDT LM324ADR LM2902N/PB operational amplifier quad operational amplifier general-purpose amplifier rail-to-rail input rail-to-rail output gain-bandwidth product slew rate input noise density phantom ground standby mode BiCMOS SOIC-16 surface-mount package analog integrated circuit sensor signal conditioning audio amplifier industrial control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ