TS925IDT - Quad 80mA Rail-to-Rail Op Amp | STMicroelectronics
料号: TS925IDT ✓ 量产中TS925IDT 概述
An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. A rail-to-rail input and output amplifier can operate with input and output voltages close to either supply rail, making it useful in battery-powered, portable, and mixed-signal equipment. The TS925 belongs to the general-purpose operational amplifier family within the broader analog and linear IC hierarchy.
The TS925IDT combines four amplifiers in one package with several features aimed at portable instrumentation. Its rail-to-rail input stage accepts signals across nearly the full supply range, while rail-to-rail output swing supports low-impedance loads. High output current of 80 mA can drive up to 32 loads according to the manufacturer documentation. The 4 MHz bandwidth and 1.3 V/us slew rate improve response speed in audio, sensor, and control paths.
The TS925 also includes standby mode and an adjustable phantom-ground arrangement. The internal low-impedance phantom ground can simplify biasing and eliminate the need for an external reference voltage or bias network in suitable applications. The four amplifiers share one package while retaining independent input and output pins, allowing one component to implement four analog functions.
Typical applications include portable audio and headphone stages, low-voltage sensor conditioning, current measurement, industrial control, and general-purpose instrumentation. The 80 mA output capability is particularly useful when the amplifier must drive heavier loads than a conventional low-power quad amplifier can support. The SOIC-16 package also simplifies assembly and provides adequate pin spacing for production test and inspection.
When designing around the TS925IDT, verify input common-mode range and output swing for the actual load current because rail-to-rail operation does not guarantee perfect saturation at the supply rails. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the manufacturer's recommended stable input arrangement rather than left floating.
This page combines the TS925IDT operating characteristics with same-package family alternatives, application guidance, comparison parameters, and practical layout notes. These engineering-oriented details help shorten component selection and support design decisions that are not visible in a basic distributor catalog listing.
直接替换替代料: TS925IDT ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: TS925IDT (相同外形与封装尺寸) ——差异在于 Package, Amplifier Type, Slew Rate, Supply Voltage Range, Number of Amplifiers.
TS925ID
✅ 直接替换联系询价
查看数据手册 →TS925IDT 最大额定值与电气特性
| Amplifier Type | Quad general-purpose operational amplifier |
| Number of Circuits | 4 circuits |
| Rail-to-Rail Input | Yes |
| Rail-to-Rail Output | Yes |
| Supply Voltage Range | 3 V to 12 V |
| Optimized Supply Voltage | 3 V and 5 V |
| Gain-Bandwidth Product | 4 MHz |
| Slew Rate | 1.3 V/us |
| Input Noise Density | 9 nV/Hz |
| Output Current | 80 mA |
| Load Drive Capability | Up to 32 loads |
| Low Distortion | Supported |
| Low Input Offset Voltage | Specified in the manufacturer datasheet |
| Standby Mode | Yes |
| Phantom Ground | Adjustable, internal low-impedance phantom ground |
| 封装 | SOIC-16, 16-SO |
| 安装类型 | Surface mount |
| RoHS 状态 | RoHS details listed by part distributors |
TS925IDT soic-16, 16-so 引脚配置指南
TS925IDT(soic-16, 16-so 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。
暂无详细引脚数据: TS925IDT.
请参阅 数据手册 以查看完整引脚配置。
典型应用
TS925IDT 适用于 6 应用s: Portable Audio and Headphone Drive, Low-Voltage Sensor Signal Conditioning, Industrial Control and Instrumentation, Current Measurement with Shunt Sensor, Battery-Powered Portable Equipment, Audio Distribution and Line Buffering.
Portable Audio and Headphone Drive
The TS925IDT fits portable audio paths because its rail-to-rail output stage operates near the supply rails while delivering up to 80 mA of output current. A designer can use the four channels for a headphone driver, line amplifier, mixer, and output-buffer stage in a 3.3 V or 5 V system. The 1.3 V/us slew rate provides faster edge control than slow general-purpose amplifiers, while the 4 MHz bandwidth supports audio-band signals. The important trade-off is power: continuous high-current operation into a low-impedance load increases dissipation, so the load current and amplifier output stage should be checked against the manufacturer's thermal and current limits.
推荐
Low-Voltage Sensor Signal Conditioning
The TS925IDT is appropriate for conditioning low-voltage sensor outputs because its rail-to-rail input stage accepts signals near the supply rails and its low 9 nV/Hz input noise supports high-resolution measurements. Four independent amplifiers can condition bridge, temperature, pressure, or current-sensor channels without requiring four separate packages. In a 3.3 V or 5 V acquisition system, place input filtering close to the pins and observe the input-common-mode limits for each selected amplifier configuration. The adjustable phantom-ground feature can simplify biasing arrangements in suitable circuits, reducing the need for an external low-impedance reference network.
推荐
Industrial Control and Instrumentation
The TS925IDT can be used in industrial control and instrumentation circuits that operate from a 3 V, 5 V, or nominal 12 V supply. Its four channels allow a compact implementation of error amplifiers, transimpedance stages, actuator drivers, and signal-conditioning channels in one SOIC-16 package. The 80 mA output-current capability is valuable when driving a control input or low-impedance intermediate stage rather than only a high-impedance feedback network. Designers should verify supply-current behavior and thermal rise at the selected operating temperature, and should use stable compensation or noise-gain configurations appropriate for the capacitive load presented by the driven circuit.
推荐
Current Measurement with Shunt Sensor
The TS925IDT can amplify the voltage generated across a low-value current shunt when its input noise and rail-to-rail common-mode range match the measurement resolution. One amplifier channel performs the differential shunt gain stage while the remaining channels can provide offset, filtering, or level shifting. The 4 MHz bandwidth is adequate for many fast current transients, and the 1.3 V/us slew rate helps preserve pulse edges without adding an external buffer. For high-side shunt sensing, however, a dedicated current-sense amplifier may provide better common-mode rejection and integrated current-path handling than a general-purpose operational amplifier.
推荐
Battery-Powered Portable Equipment
The TS925IDT is suitable for battery-powered equipment that uses a 3 V or 5 V rail because its input and output stages operate close to the supply limits. Rail-to-rail sensing helps preserve signal range in compact systems where the available headroom is limited, while the standby function can disable selected activity to reduce system demand. The four-channel integration also reduces board area compared with four separate single amplifiers. Designers must still account for supply current across all four channels, confirm that the standby-control state matches the system's sequencing requirements, and verify that the output remains in the usable region at light and heavy loads.
推荐
Audio Distribution and Line Buffering
The TS925IDT can serve as an active line buffer or low-impedance distribution amplifier in professional and consumer audio boards. Its 80 mA output capability provides more drive than a typical low-power quad amplifier, and the low 9 nV/Hz input noise supports quiet amplification of low-level audio signals. Four channels can drive several short cable or buffer inputs, provided each load remains within the output-current and stability limits. The 4 MHz bandwidth is more than adequate for baseband audio, while the 1.3 V/us slew rate helps reproduce transients cleanly. Maintain short output traces and terminate unused channels according to the manufacturer guidance.
推荐
推荐产品汇总
工程参考数据: TS925IDT ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | TS925ID | TS925I | TS924IDT |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | SOIC-16 | SOIC-16 - same | SOIC-16 - same | SOIC-16 - same |
| Number of Amplifiers | 4 | 4 | 4 | 4 |
| Input and Output Configuration | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output | Rail-to-rail input and output |
| Standby Mode | Yes | Yes | Yes | Different special-function configuration |
| Phantom Ground | Adjustable internal low-impedance phantom ground | Adjustable internal low-impedance phantom ground | Adjustable internal low-impedance phantom ground | Different special-function configuration |
关键差异点
- High output drive within a four-channel package (对比 LM324ADR)
- Higher speed and lower noise for precision analog paths (对比 LM2902N/PB)
- Standby and phantom-ground functions integrated (对比 TS924IDT)
设计说明
Estimated: with all four amplifiers operating at 80 mA output current, the worst-case load power is P = 4 x 0.08 A x VOUT. At a 5 V output this reaches 1.6 W before accounting for internal bias current, and at 12 V it reaches 3.84 W. Check the SOIC-16 package thermal resistance and the maximum junction temperature in the manufacturer datasheet, because high continuous output current can make the package a significant heat source.
Place the supply bypass capacitor directly between the positive supply and ground pins, with the shortest possible trace and ground connection. Keep input and output traces away from the high-current output nodes, particularly when driving low-impedance loads. The TS925 can switch at 1.3 V/us, so fast output edges couple more readily into adjacent high-impedance inputs than slower amplifiers would.
Do not treat a rail-to-rail input and output amplifier as an exact rail-to-the-rail component. The output still requires headroom, particularly at high current, and the usable input range can depend on the selected amplifier configuration. Do not leave unused amplifier inputs floating; follow the manufacturer's recommended input and bias arrangement. Also verify the standby pin polarity and its effect on all four channels before using the part for power sequencing.
合规信息
RoHS information is listed for the TS925IDT by part distributors. Automotive qualification, REACH status, halogen-free status, and conflict-minerals declarations were not confirmed in the manufacturer documentation reviewed for this page.