XC2C64A-5VQG44C - 64-Macrocell 1.8V CPLD | AMD Xilinx
MPN: XC2C64A-5VQG44C ✓ NakahandaXC2C64A-5VQG44C Ulas
A complex programmable logic device is a programmable semiconductor used to implement fixed or time-varying digital logic. Within the semiconductor hierarchy, a CPLD occupies the position between simple programmable logic arrays and more complex programmable logic devices. It combines nonvolatile in-system programmability with deterministic logic timing and a compact package suited to control, interface, glue-logic, and low-power embedded applications.
The CoolRunner-II architecture provides 64 macrocells, approximately 1.5K equivalent gates, and a maximum operating frequency listed as 159 MHz. The -5 speed designation corresponds to the 4.6 ns pin-to-pin delay, while the G44 suffix identifies the 44-pin package and C identifies the commercial temperature grade. The device also supports 1.8 V-oriented operation and has a low quiescent current specification of approximately 15 µA.
The XC2C64A family is designed for compact implementations that require several digital functions without loading a larger programmable logic device. Its macrocell-based architecture provides predictable routing delays and nonvolatile configuration retention. The in-system programming capability allows configuration signals, logic behavior, or board-level production programming to be managed without relying on a separate mask-programmed device.
Typical uses include industrial control and automation, communication equipment, portable and battery-operated electronics, interface control, display control, and embedded system support logic. The 33 available I/O pins allow the device to implement parallel data paths, control signals, state machines, and peripheral glue logic while conserving board area. Its low quiescent current is particularly useful when the system spends substantial time in a low-power state.
PCB design should preserve the manufacturer-specified decoupling and programming-interface layout. Place the input, output, and configuration bypass capacitors close to their associated pins, route programming signals away from sensitive high-speed nodes, and provide a clean ground reference beneath the device. Confirm voltage compatibility for every connected bank because the 1.8 V optimization describes the intended design point rather than a blanket permission to use any I/O voltage.
This product record combines the DS311 device specifications, package and speed-grade details, sourcing information, and application-oriented design guidance to support CPLD selection, PCB implementation, and replacement planning.
Mga alternatibo na pwedeng ilagay na XC2C64A-5VQG44C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC2C64A-5VQG44C (parehas na form factor at footprint) — pagkakaiba sa Device Type, Quiescent Current, Package, Process Technology, RoHS Status.
XC2C64A-7VQG44C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC2C64A-7VQG44I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC2C64-5VQG44C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC2C64-7VQG44C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC2C64A-5VQG44C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | CoolRunner-II complex programmable logic device |
| Programming Type | In-system programmable |
| Macrocells | 64 macrocells |
| Equivalent Logic Capacity | 1.5K gates |
| User I/O Count | 33 I/O pins |
| Maximum Frequency | 159 MHz |
| Pin-to-Pin Logic Delay | 4.6 ns |
| Core Technology | 0.18 µm CMOS |
| Optimized Supply Voltage | 1.8 V |
| Kuru-kuryente ng Kapayapaan | 15 µA |
| Packhaging | 44-pin VTQFP, 10 mm × 10 mm |
| Uri ng Pagpapasok | Surface mount |
| Temperature Grade | Commercial |
| Configuration Retention | Nonvolatile |
| Tindminan RoHS | RoHS compliant |
| Lead-Free Status | Lead free |
Gabay sa Pin Configuration ng XC2C64A-5VQG44C 44-pin vtqfp, 10 mm × 10 mm
Pin configuration para sa XC2C64A-5VQG44C (44-pin vtqfp, 10 mm × 10 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC2C64A-5VQG44C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC2C64A-5VQG44C ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, Communication Interface Control, Portable and Battery-Powered Electronics, Interface and Glue Logic, Audio and Display Control, Server and Network Equipment.
Industrial Control and Automation
The XC2C64A-5VQG44C is suitable for compact control logic in industrial controllers, sensor-conditioning systems, and factory automation equipment. Its 64 macrocells can implement state machines, interlocks, relay controls, alarm logic, and communication framing without consuming a larger FPGA. The 4.6 ns pin-to-pin delay and 159 MHz listed maximum frequency provide useful timing margin for registered control paths, while the 33 user I/O pins support external sensors and actuators. The 44-pin VTQFP package also keeps the device practical for space-constrained control boards.
Inirekomenda
Communication Interface Control
The XC2C64A-5VQG44C can implement protocol framing, command decoding, byte alignment, FIFO control, and status multiplexing around serial communication devices. Sixty-four macrocells provide enough capacity for parallel-to-serial control logic and auxiliary state machines, while the 33 I/O pins allow direct connection to transceiver and processor interfaces. Its 159 MHz listed maximum frequency supports demanding control paths, but designers should use the -5 timing data in DS311 (v2.3) to establish actual system margin.
Inirekomenda
Portable and Battery-Powered Electronics
The XC2C64A-5VQG44C is appropriate for portable equipment requiring configurable control logic while keeping standby consumption low. Its approximately 15 µA quiescent-current specification supports systems that spend substantial time waiting for user input or external events. The 1.8 V-oriented architecture is useful for compact modern power trees, and the 33 user I/O pins can manage displays, buttons, sensors, and power-management signals. Configuration retention allows the logic to remain available without repeated programming after each power cycle.
Inirekomenda
Interface and Glue Logic
The XC2C64A-5VQG44C is useful for resolving protocol mismatches, generating enables, multiplexing legacy signals, and implementing board-level interconnects between processors and peripherals. Its 64 macrocells offer more routing flexibility than a small fuse-programmable array, while the compact 44-pin package preserves PCB area. The CPLD can consolidate scattered discrete gates into one deterministic design, and its in-system programming capability supports production configuration or last-minute board-level logic adjustments without changing the baseboard design.
Inirekomenda
Audio and Display Control
The XC2C64A-5VQG44C can coordinate digital audio paths, display timing, button matrices, indicators, and mode-control signals in multimedia equipment. Its 64 macrocells support counters, shift registers, timing generators, and command decoding, while 33 I/O pins provide direct panel and codec connectivity. The 4.6 ns pin-to-pin delay helps minimize uncertainty in control timing around slow-to-medium-speed peripherals. Designers should use registered interfaces where possible to improve system predictability and minimize combinatorial routing delays.
Inirekomenda
Server and Network Equipment
The XC2C64A-5VQG44C fits auxiliary control functions in network appliances, storage systems, and server peripherals where deterministic programmable logic simplifies board management. Typical tasks include status decoding, interrupt routing, power sequencing, watchdog handling, and interface isolation. The 64-macrocell device provides a practical capacity for these functions, and the 44-pin VTQFP package supports dense multilayer boards. Its 159 MHz listed maximum frequency is useful for control and bus arbitration logic, although each interface should be verified against its timing requirements.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC2C64A-5VQG44C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC2C64A-7VQG44C | XC2C64A-7VQG44I | XC2C64-5VQG44C | XC2C64-7VQG44C |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 44-pin VTQFP | 44-pin VTQFP | 44-pin VTQFP | 44-pin VTQFP | 44-pin VTQFP |
| Macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells | 64 macrocells |
| User I/O Count | 33 I/O pins | 33 I/O pins | 33 I/O pins | 33 I/O pins | 33 I/O pins |
| Speed Grade | -5 | -7 | -7 | -5 | -7 |
| Temperature Grade | Commercial | Commercial | Industrial | Commercial | Commercial |
| Programming Type | In-system programmable | In-system programmable | In-system programmable | In-system programmable | In-system programmable |
| Logic Capacity | 1.5K gates | 1.5K gates | 1.5K gates | 1.5K gates | 1.5K gates |
| Process Technology | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS | 0.18 µm CMOS |
Pangunahing mga Pagkakaiba
- Faster -5 speed grade within the same package (kumpara saXC2C64A-7VQG44C)
- Commercial-grade selection with the same 44-pin VTQFP footprint (kumpara saXC2C64A-7VQG44I)
- Enhanced CoolRunner-II generation with the same logic capacity (kumpara saXC2C64-5VQG44C)
Talaan ng Disenyo
Place all required input, output, and configuration bypass capacitors close to their associated device pins, following the capacitor placement and connectivity shown in the DS311 (v2.3) application information. Keep the programming interface accessible and route its signals away from high-current switching nodes. A compact VTQFP footprint requires careful escape routing because incorrect pad geometry or programming access can prevent reliable board assembly.
Use registered logic for interfaces whose timing margin is limited, especially when the design also includes clocked processors, transceivers, or memory. The -5 grade provides a 4.6 ns pin-to-pin delay, but this is not a substitute for static timing analysis. Check setup and hold requirements, external driver strength, loading, and the selected I/O standard before treating the listed 159 MHz maximum frequency as a system-level guarantee.
Design the supply rails and decoupling for the 1.8 V-oriented operating point specified in DS311 (v2.3). Confirm every power and I/O pin's allowable voltage and current in the manufacturer tables before connecting external devices. Maintain a continuous ground reference beneath the device and avoid routing high-current return paths through the logic area, since these practices reduce ground bounce and improve configuration reliability.
Do not substitute the XC2C64A-5PCG44C for the target without redesigning the PCB because its package differs. Likewise, the XC2C64A-5VQ44C uses a different package designation from the VTQFP target. When replacing the target with a -7 speed grade, review every critical path after implementation and increase timing margin where necessary rather than assuming electrical compatibility alone guarantees functional interchangeability.
Impormasyon ng Pagsunod sa Kautusan
The component listing identifies the XC2C64A-5VQG44C as RoHS compliant and lead free. No REACH, halogen-free, conflict-minerals, or automotive-qualification statement is specified.