PABALIKANG MAGBILI NG IKAKATUWID: XC4VFX12-10FFG668C ay papalapit sa katapusan ng buhay. Huling pagsugod ng order: Magkontak sa amin. Tingnan ang mga magagamit na alternatibong bahagi →
AMD

XC4VFX12-10FFG668C - 12,312-Cell Virtex-4 FX FPGA | AMD

MPN: XC4VFX12-10FFG668C ✗ Tapus ng Buhay
1.2 V Vdss 668-pin FCBGA Package 1028 MHz Speed
MOQ: 1 |

XC4VFX12-10FFG668C Ulas

The AMD Xilinx XC4VFX12-10FFG668C is a Virtex-4 FX field-programmable gate array with 12,312 programmable logic cells, 320 user I/O, and a maximum internal operating frequency of 1028 MHz. Built on 90 nm CMOS technology and supplied in a 668-pin FCBGA package, it combines programmable logic, block RAM, DSP resources, and selectable I/O standards in one reconfigurable semiconductor device. The -10 speed grade targets designs requiring a 1028 MHz internal clock, while the commercial temperature suffix C supports operation from 0°C to 85°C.

A field-programmable gate array is a semiconductor whose digital logic is configured after manufacture. In the hierarchy of programmable devices, an FPGA sits above fixed-function logic and below a system-on-chip, combining configurable logic blocks, routing resources, memory, multipliers, and I/O. The XC4VFX12 belongs to the Virtex-4 FX family, which was designed for high-performance signal processing, networking, communications, industrial control, and embedded systems with substantial parallel processing requirements.

The device provides 12,312 logic cells organized in 1,368 configurable logic blocks and includes 320 user I/O. Its 90 nm CMOS process supports operation with a 1.2 V core supply. These resources make the XC4VFX12 suitable for implementing parallel datapaths, protocol engines, image-processing pipelines, control logic, and mixed fixed-function/soft-processor systems within one package. The -10 designation identifies the device's speed grade, while FFG668C identifies the package, lead-free status, and commercial temperature grade.

At the architecture level, the FPGA combines Configurable Logic Blocks with dedicated block RAM and DSP48 resources, allowing designers to map arithmetic and storage operations directly into silicon. Its reported 1028 MHz internal frequency describes the maximum internal clocking capability rather than the operating rate of every user interface. External interfaces still depend on selected I/O standards, board-level timing, pin constraints, and the clocking resources assigned in the implementation tools.

Typical applications include telecommunications line-card control, industrial automation, radar and defense signal processing, medical imaging, video infrastructure, and embedded control platforms. In these systems, the XC4VFX12 can implement multiple parallel processing channels while supporting high-speed external data movement through its 320 I/O. It is also suitable for prototype development and legacy equipment refreshes where preserving an established Virtex-4 architecture reduces redesign risk.

The principal design consideration is that this is a large, high-pin-count BGA device. PCB design must follow AMD's package and pinout files, provide dense power and ground distribution, and implement all required decoupling and controlled-impedance routing. Configuration storage, clocking, power sequencing, thermal performance, and legacy software-tool compatibility must also be planned before layout begins.

This page consolidates the available device identification, package, speed-grade, temperature, and resource information into an engineering-focused reference. It also distinguishes documented ordering variants, explains the constraints affecting drop-in replacement, and highlights the design checks required for a reliable Virtex-4 FPGA implementation.

Mga alternatibo na pwedeng ilagay na XC4VFX12-10FFG668C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok XC4VFX12-10FFG668C (parehas na form factor at footprint) — pagkakaiba sa Device Type, Operating Temperature, Package Type, Process Technology, Speed Grade.

AMD
Device Type: Virtex-4 FX field-programmable gate array
Package Type: 668-pin S-PBGA (FCBGA)
Process Technology: CMOS
Ikabit sa XC4VFX12-10FFG668C →
AMD
Device Type: Virtex-4 FX Field Programmable Gate Array (FPGA)
Operating Temperature: 0°C to 85°C (32°F to 185°F)
Package Type: 668-position FBGA
Ikabit sa XC4VFX12-10FFG668C →
AMD
Operating Temperature: 0 °C to 85 °C (32 °C to 185 °F)
Package Type: FCBGA-668
Ikabit sa XC4VFX12-10FFG668C →
AMD
Device Type: Virtex-4 FX field-programmable gate array (FPGA)
Speed Grade: -11
Ikabit sa XC4VFX12-10FFG668C →

XC4VFX12-10FFG668I

✅ Drop-In
AMD
📦 668-pin FCBGA
Virtex-4 FX · Field-Programmable Gate Array (FPGA) · 12,312 cells · 10,544 · 320 I/O · 668 pins · FCBGA-668 · 1028 MHz

Magkontak para sa presyo

Tingnan ang Datasheet →

XC4VFX12-11FFG668C

✅ Drop-In
AMD
📦 668-pin FCBGA
Virtex-4 FX field-programmable gate array (FPGA) · 12,312 cells · 10,544 logic cells · 1,368 CLBs · 320 I/Os · 90 nm CMOS · 1.2 V · 1,028 MHz

Magkontak para sa presyo

Tingnan ang Datasheet →

XC4VFX12-12FFG668C

✅ Drop-In
📦 668-pin FCBGA
Same XC4VFX12 resource level and 668-pin FFG package; -12 speed grade raises maximum internal frequency to 1294 MHz versus 1028 MHz for -10.

📋 Alternatibo na Reference (hindi sa katalogo)

XC4VFX12-10FF668C

✅ Drop-In
AMD
📦 668-pin FCBGA
Virtex-4 FX field-programmable gate array · 12,312 logic cells · 1,368 CLBs · 1,028 MHz · 0.2 ns per CLB · CMOS · -10 · Commercial (C suffix)

Magkontak para sa presyo

Tingnan ang Datasheet →

XC4VFX12-10FF668I

✅ Drop-In
AMD
📦 668-pin FCBGA
Virtex-4 FX Field Programmable Gate Array (FPGA) · 12,312 cells · 1,368 LABs · 320 I/Os · 668 pins · 668-position FBGA · Surface Mount · 90 nm CMOS

Magkontak para sa presyo

Tingnan ang Datasheet →

XC4VFX12-10FFG668C Mga Pinakamataas na Rating at Electrical Characteristics

Device Type Virtex-4 FX FPGA
Logic Cells 12,312 cells
Configurable Logic Blocks 1,368 CLBs
User I/O 320 I/O
Maximum Internal Frequency 1028 MHz
Process Technology 90 nm CMOS
Core Supply Voltage 1.2 V
Logic Family CMOS
Speed Grade -10
Temperature na Operasyon 0°C to 85°C
Packhaging 668-pin FCBGA
Package Pin Count 668 pins
Uri ng Pagpapasok Surface mount
Lead-Free Status Pb-free
Product Family Virtex-4 FX
Programmable Device Architecture Field-programmable gate array

Gabay sa Pin Configuration ng XC4VFX12-10FFG668C 668 pins

Pin configuration para sa XC4VFX12-10FFG668C (668 pins package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 668 pins package para sa XC4VFX12-10FFG668C

Wala ng detalyadong pinout data na magagamit para sa XC4VFX12-10FFG668C.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

XC4VFX12-10FFG668C ay nararapat para sa 6 aplikasyons: Telecommunications Line-Card Control, Industrial Automation and Control, Medical Imaging and Signal Processing, Aerospace and Defense Processing, Video Infrastructure, Embedded Instrumentation and Test Systems.

🌐

Telecommunications Line-Card Control

The XC4VFX12-10FFG668C fits telecommunications line-card control because its 12,312 logic cells and 320 user I/O can support packet classification, protocol termination, channel control, and board management in parallel. The 1028 MHz maximum internal frequency provides ample headroom for multi-stage datapaths, while block RAM and DSP resources can support buffering and filtering functions. Designers can implement the control plane, auxiliary datapaths, and interface logic in one package. The primary trade-off is that this is a 668-pin BGA requiring careful power distribution and multilayer routing, and the commercial temperature range limits use in unheated outdoor equipment without an enclosure-temperature assessment.

🏭

Industrial Automation and Control

The AMD XC4VFX12-10FFG668C is appropriate for industrial controllers that combine multiple I/O-intensive functions, such as motion sequencing, machine interlocking, data acquisition, and communication gateway logic. Its 1,368 configurable logic blocks and 12,312 total logic cells allow parallel control paths to coexist with protocol converters and supervisory functions. The 320 user I/O can be assigned according to the selected board-level electrical standards, allowing the FPGA to interface multiple sensors and actuators. For machinery operating across an extended temperature range, the XC4VFX12-10FFG668I industrial variant may be more appropriate. Otherwise, enclosure heating or cooling must keep the device within its 0°C-to-85°C rating.

💊

Medical Imaging and Signal Processing

The XC4VFX12-10FFG668C can consolidate parallel image-processing stages in a medical imaging controller because the Virtex-4 FX architecture combines configurable logic, block RAM, and DSP48 resources. Acquisition preprocessing, filtering, pixel manipulation, and interface conversion can be implemented in a single programmable device, reducing the number of discrete components compared with a fixed-function pipeline. The reported 1028 MHz maximum internal frequency supports demanding clocked logic, although achievable system throughput still depends on I/O width, memory bandwidth, and timing closure. Medical deployments should also apply the applicable risk-management, electrical-safety, and validation processes for the finished equipment.

✈️

Aerospace and Defense Processing

The XC4VFX12-10FFG668C offers programmable logic density and parallel I/O for legacy aerospace, defense, and instrumentation systems requiring deterministic digital behavior. It can host channel processing, command decoding, data transformation, and embedded supervisory functions while allowing field updates through its FPGA configuration mechanism. The same-package industrial variant, XC4VFX12-10FFG668I, is the relevant starting point when the environmental envelope extends beyond the commercial grade. Qualification for any specific airborne or defense application cannot be inferred from the family designation alone; the assembler must evaluate the exact ordering code, operating profile, reliability documentation, and applicable procurement requirements.

📺

Video Infrastructure

The 12,312 logic cells, 320 I/O, block memory, and dedicated DSP resources of the XC4VFX12-10FFG668C make it suitable for legacy video infrastructure such as format conversion, pixel routing, scaling assistance, and test-pattern generation. Parallel datapaths can process multiple channels concurrently, while programmable I/O can bridge source and destination interfaces. Designers should use the Virtex-4 DSP and SelectIO capabilities from the family documentation to map video lanes efficiently and must check bandwidth against the 1028 MHz maximum internal clock rather than treating it as a direct video-rate guarantee. The large FCBGA also demands strict via and routing planning to preserve signal integrity at high-speed interface rates.

🔧

Embedded Instrumentation and Test Systems

The XC4VFX12-10FFG668C is useful in configurable test and measurement platforms that require multiple acquisition channels, timing logic, pattern generation, and analysis functions within one FPGA. Its 1,368 configurable logic blocks can host parallel channels, while 320 I/O provide substantial connectivity to converters, memories, and trigger systems. Block RAM can support capture buffers, and DSP resources can accelerate filters or transforms. For systems that also need embedded processing, soft processor cores can be instantiated, but designers should budget their logic and memory consumption separately. Production use requires stable configuration files, repeatable timing constraints, and validation of the 668-ball PCB power network under worst-case switching activity.

What is the XC4VFX12-10FFG668C?
The XC4VFX12-10FFG668C is an AMD Xilinx Virtex-4 FX FPGA with 12,312 logic cells, 320 user I/O, and a 1028 MHz maximum internal frequency in a 668-pin FCBGA package. According to the AMD Virtex-4 Family Overview Data Sheet DS112, it uses 90 nm CMOS technology and a 1.2 V core supply. The -10 suffix identifies the speed grade, FFG identifies the lead-free 668-pin package, and C denotes the commercial temperature grade.
Where can I download the XC4VFX12-10FFG668C datasheet PDF?
The AMD Virtex-4 Family Overview Data Sheet DS112 is available from AMD's official documentation portal at https://docs.amd.com/v/u/en-US/ds112. It contains the family-level architecture, resource, electrical, package, and ordering information for the XC4VFX12. For exact BGA ball assignments, use AMD's Virtex-4 package device pinout files rather than relying on a generic distributor pin table, because the 668-pin FCBGA has too many connections to identify safely from a simplified page.
What are the key specifications of XC4VFX12-10FFG668C that engineers should know?
The principal specifications are 12,312 logic cells, 1,368 configurable logic blocks, 320 user I/O, a 1028 MHz maximum internal frequency, and a 668-pin FCBGA package. The AMD DS112 family overview identifies a 90 nm CMOS implementation and a 1.2 V core supply. The device also belongs to the Virtex-4 FX family, whose configurable logic, block RAM, DSP resources, and selectable I/O support parallel datapath and signal-processing designs.
Where can I find the XC4VFX12-10FFG668C pinout?
The authoritative XC4VFX12-10FFG668C pinout is the 668-pin FCBGA device pinout file published in AMD's Virtex-4 Package Device Pinout Files resource. Use that package-specific file when assigning PCB balls, power, ground, configuration pins, and user I/O. The AMD DS112 overview supplies package information, while UG070 provides architectural guidance. Confirm the exact suffix and package revision against the ordering table before releasing a PCB netlist.
What is the difference between XC4VFX12-10FFG668C and XC4VFX12-11FFG668C?
The main documented difference is the speed grade: the XC4VFX12-10FFG668C is the -10 grade with a 1028 MHz maximum internal frequency, while the XC4VFX12-11FFG668C is the faster -11 grade. Both use the XC4VFX12 device and 668-pin FFG package, but timing closure and power characteristics can differ. If retaining a -10 design, verify the replacement against the complete AMD DC and AC characteristics before treating it as an exact drop-in.
Can XC4VFX12-11FFG668C replace XC4VFX12-10FFG668C?
The XC4VFX12-11FFG668C can serve as a same-family, same-package replacement candidate for the XC4VFX12-10FFG668C, provided the PCB, configuration, and power design are compatible. Its -11 speed grade is faster than the target's -10 grade, with a maximum internal frequency listed for the -11 family variant at 1178 MHz versus 1028 MHz for -10. The higher frequency is not automatically beneficial: timing paths must be revalidated against the original design constraints.
What is the best drop-in replacement for XC4VFX12-10FFG668C?
The closest drop-in candidates are the same XC4VFX12 family members using the 668-pin FFG package, particularly XC4VFX12-11FFG668C for a higher speed grade and XC4VFX12-10FFG668I for the industrial temperature grade. No independently verified cross-brand drop-in replacement was established. Confirm compatibility with AMD DS112, the package pinout file, the original bill of materials, configuration requirements, and the operating-temperature envelope before purchasing a substitute.
When should I choose XC4VFX12-10FFG668C over a faster XC4VFX12 grade?
Choose the -10 device when the design was originally qualified around its 1028 MHz maximum internal frequency and the commercial 0°C-to-85°C range is sufficient. It can reduce the need for a speed-grade transition when an existing -10 timing baseline must be preserved. A faster -11 or -12 grade may be attractive for new designs, but implementation results and worst-case timing should be regenerated rather than assuming that the same constraints apply.
Is XC4VFX12-10FFG668C suitable for industrial and communications equipment?
The XC4VFX12-10FFG668C is suitable for commercial-temperature communications, industrial, medical, and embedded applications that fit its 0°C-to-85°C range. Its 12,312 logic cells, 320 user I/O, block RAM, DSP resources, and 1028 MHz maximum internal frequency support parallel processing and high-speed control tasks. Industrial systems with wider temperature requirements should evaluate the -10FFG668I industrial-grade ordering option instead.
What is the lead time for XC4VFX12-10FFG668C?
Current production lead time is not established by the available product information, and the Virtex-4 family is no longer in production. Use the Request a Quote form on this page to request current availability, minimum order quantity, and lead time for the exact 668-pin FFG668C suffix. Quote requests should include the target quantity and any date-code or traceability requirements because obsolete FPGA inventory can vary significantly between batches.
Where to buy XC4VFX12-10FFG668C online?
Use the Request a Quote form on this page for the XC4VFX12-10FFG668C, including current availability, lead time, and volume requirements. The exact suffix is a 668-pin, lead-free, commercial-temperature Virtex-4 FX FPGA, so buyers should avoid substitutions based only on the XC4VFX12 base name. Request configuration testing or an appropriate inspection option when procuring legacy inventory for production use.
What is the price of XC4VFX12-10FFG668C?
The current unit price is best obtained through the Request a Quote form on this page because legacy FPGA values depend on quantity, condition, traceability, and available inventory. The part is a 12,312-cell Virtex-4 FX FPGA in a 668-pin FCBGA package. A quote request that specifies the required quantity, target date, acceptable condition, and inspection requirements helps prevent confusion with other XC4VFX12 package or temperature variants.
Is XC4VFX12-10FFG668C in stock?
Current stock cannot be confirmed from the available product information, so use the Request a Quote form on this page to check availability for the exact MPN. Because XC4VFX12 belongs to a discontinued family, inventory may be limited or vary by lot. Specify whether factory-sealed stock, date-code traceability, programming support, or Xilinx test coverage is required, and do not substitute a different package or temperature suffix without engineering approval.
What is the best AMD equivalent for XC4VFX12-10FFG668C?
The best AMD-family candidates are XC4VFX12-10FFG668I for industrial-temperature use, XC4VFX12-11FFG668C for a faster speed grade, and XC4VFX12-12FFG668C for the highest Virtex-4 speed grade when its timing and power requirements are acceptable. These are same-family ordering variants rather than cross-brand equivalents. Confirm the package, temperature grade, speed grade, configuration compatibility, and timing results using AMD DS112 and the package pinout files.
What can replace XC4VFX12-10FFG668C on the same PCB?
A same-family replacement should use the XC4VFX12 base device in the 668-pin FFG package, with the speed and temperature suffix selected to match the original requirements. The XC4VFX12-11FFG668C offers a higher speed grade, while XC4VFX12-10FFG668I preserves the -10 grade but extends the temperature class to industrial. Verify every power, ground, configuration, and user-I/O ball against AMD's package file before approving a substitution.
How should power and decoupling be designed for XC4VFX12-10FFG668C?
Follow the power-supply and decoupling requirements in AMD's Virtex-4 documentation rather than treating the 1.2 V core rating as a complete power specification. Distribute core and auxiliary supplies through a dense, low-impedance PCB grid, place decoupling capacitors close to their assigned power balls, and use a power plane architecture capable of handling the device's dynamic current demand. Validate steady-state and transient voltage at the balls because activity-dependent current can produce local supply droop.
Can a Virtex-4 FPGA be replaced by a modern FPGA without a PCB redesign?
No general pin-for-pin replacement is established for XC4VFX12-10FFG668C, and a modern FPGA with similar logic capacity should not be assumed to fit the 668-pin FCBGA footprint. Device migration generally requires new pin constraints, power design, memory interfaces, I/O standards, clocking, configuration support, and FPGA-tool validation. The same-package Virtex-4 speed and temperature variants are therefore the practical starting point for a drop-in review.

Impormasyon ng Talumpati sa Engineering for XC4VFX12-10FFG668C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the XC4VFX12-10FFG668C when maintaining an existing Virtex-4 FX design, PCB, and -10 timing baseline is more important than maximizing internal frequency. Its 12,312 logic cells, 320 I/O, 90 nm CMOS implementation, and 1.2 V core supply fit communications, industrial control, instrumentation, video, and legacy embedded processing. Select XC4VFX12-10FFG668I when the same speed grade is needed in an industrial temperature environment. Choose XC4VFX12-11FFG668C or XC4VFX12-12FFG668C for new designs with additional timing headroom, but rerun implementation and power checks. Use XC4VFX12-10FF668C only when the non-lead-free package option is acceptable. No cross-brand drop-in equivalent is established, so a migration to another FPGA family should be treated as a full redesign rather than a replacement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto XC4VFX12-10FFG668I XC4VFX12-11FFG668C XC4VFX12-12FFG668C XC4VFX12-10FF668C
Brand AMD AMD AMD AMD AMD
Package 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA
Device Family Virtex-4 FX Virtex-4 FX Virtex-4 FX Virtex-4 FX Virtex-4 FX
Logic Cells 12,312 cells 12,312 cells 12,312 cells 12,312 cells 12,312 cells
Configurable Logic Blocks 1,368 CLBs 1,368 CLBs 1,368 CLBs 1,368 CLBs 1,368 CLBs
User I/O 320 I/O 320 I/O 320 I/O 320 I/O 320 I/O
Maximum Internal Frequency 1028 MHz at -10 speed grade 1028 MHz at -10 speed grade 1178 MHz at -11 speed grade 1294 MHz at -12 speed grade 1028 MHz at -10 speed grade
Process Technology 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS 90 nm CMOS
Core Supply Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Operating Temperature 0°C to 85°C commercial grade -40°C to 85°C industrial grade 0°C to 85°C commercial grade 0°C to 85°C commercial grade 0°C to 85°C commercial grade
Lead-Free Packaging Yes, FFG package option Yes, FFG package option Yes, FFG package option Yes, FFG package option No, non-F/G package option

Pangunahing mga Pagkakaiba

  • Maintains the original -10 speed baseline (kumpara saXC4VFX12-11FFG668C)
  • Lower-speed option reduces transition to a higher grade (kumpara saXC4VFX12-12FFG668C)
  • Commercial-grade ordering option (kumpara saXC4VFX12-10FFG668I)
  • Lead-free package configuration (kumpara saXC4VFX12-10FF668C)

Talaan ng Disenyo

Implement the 1.2 V core supply and auxiliary rails as a dense, low-impedance distribution network rather than relying on narrow point-to-point traces. Place the required bulk and high-frequency decoupling capacitors close to their assigned BGA balls, connect power and ground planes over the complete device footprint, and separate likely noisy sources from sensitive reference or clock distribution. Validate the power network using worst-case FPGA switching activity because the effective dynamic demand can be much higher than a simple logic-cell count suggests.

Treat the 668-pin FCBGA as a demanding fine-pitch BGA layout. Follow the escape-routing geometry and ball assignments in AMD's Virtex-4 package pinout files, account for the thermal and electrical requirements of the package, and use a multilayer stack-up with short return paths beneath high-speed routes. Do not assign pins from the simplified distributor description. Review drill, pad, solder-mask, assembly, and via requirements with the PCB fabricator and assembler before releasing production files.

Estimate junction temperature from actual board construction and the FPGA's activity-dependent dissipation rather than from package size alone. Provide uninterrupted copper beneath and around the BGA where the package design permits, use through-hole thermal vias according to AMD and assembly guidance, and select enclosure airflow or conduction paths based on the measured temperature rise. The commercial suffix limits the device to 0°C-to-85°C; use the -10FFG668I industrial variant when the required environmental envelope exceeds that range.

Constrain clock, configuration, and high-speed I/O paths according to their selected I/O standards and board-level timing requirements. Keep sensitive clock distribution away from high-switching outputs, use source-synchronous routing techniques where specified, and verify the complete channel with the actual package and PCB stack-up. A 1028 MHz internal FPGA clock does not imply that every external interface can operate at that rate; usable line rate depends on the I/O standard, data width, clocking scheme, and timing closure.

Avoid confusing the XC4VFX12 base device with its package and temperature ordering variants. Confirm that the replacement uses the 668-pin package, compare -10, -11, and -12 speed grades, and verify commercial versus industrial temperature limits. For a higher speed grade, regenerate timing results and review power behavior rather than assuming that faster silicon is interchangeable without qualification. Also verify configuration-memory requirements and retain a recoverable programming method for legacy production systems.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Yes
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The FFG668C ordering option is identified as Pb-free. No separate RoHS, REACH, halogen-free, conflict-minerals, or automotive qualification statement was established for this exact device.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

xc4vfx12 10sfg363i xc4vfx12 10sfg363c xc4vfx12 datasheet xilinx xc4vfx12 virtex xc4vfx12 XC4VFX12-10FFG668C datasheet pdf XC4VFX12-10FFG668C pinout XC4VFX12-10FFG668C equivalent XC4VFX12-10FFG668C replacement XC4VFX12-10FFG668C price

Mga kaugnay na Mga Komponente at mga Tuntunin

AMD AMD Xilinx XC4VFX12 XC4VFX12-10FFG668C XC4VFX12-10FFG668I XC4VFX12-11FFG668C XC4VFX12-12FFG668C Virtex-4 FX field-programmable gate array FPGA configurable logic block CLB block RAM DSP48 90 nm CMOS 1.2 V core supply 1028 MHz 12,312 logic cells 320 user I/O 668-pin FCBGA FCBGA surface-mount package AMD DS112 AMD UG070 Pb-free
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ