XC4VFX20-11FF672C - Virtex-4 FX FPGA, 19,224 Cells, 672-BBGA | AMD/Xilinx
MPN: XC4VFX20-11FF672C ✗ Tapus ng BuhayXC4VFX20-11FF672C Ulas
An FPGA is a programmable digital logic device that allows a system designer to implement combinational and sequential logic, interfaces, processing pipelines, and control functions in a single integrated circuit. Within the semiconductor hierarchy, the XC4VFX20 belongs to the Virtex-4 FX FPGA family, which combines configurable logic resources with large-routing capability for demanding embedded systems. Unlike a fixed-function application-specific integrated circuit, an FPGA allows design changes to be implemented through bitstream programming.
Key device attributes include a 320-resource embedded processing-related count shown in the product listing, 1,253,376 in the same listing, and a 672-ball package offering high I/O connectivity. The device supports the -12, -11, and -10 speed grades, with the -12 grade designated for the highest performance. Its CMOS construction and 90 nm process node reflect the technology generation of the Virtex-4 portfolio, while the large FCBGA package supports the substantial interconnect and power requirements of the device.
The 672-pin FCBGA footprint requires a multi-layer PCB with dense escape routing and careful power-plane construction. Designers should use the AMD Virtex-4 package pinout files when assigning PCB signals, and should treat power, ground, decoupling, and configuration pins according to the package-specific guidance in the Virtex-4 family documentation. The package provides substantially more interconnect capacity than a leaded package, but it also raises sensitivity to assembly workmanship, solder-paste control, and thermal gradients.
Typical applications include telecommunications equipment, industrial control systems, high-speed data processing, network-interface equipment, test and measurement platforms, and embedded control or signal-processing subsystems. In these systems, the device can implement parallel datapaths, protocol interfaces, timing control, and application-specific processing while reducing the number of discrete logic components.
When planning a design, verify the selected -11 speed grade against the required internal and I/O timing, confirm that every power rail meets the DC and AC requirements in the family data sheet, and use AMD package pinout files as the authoritative source for board-level connectivity. Because the package is large and fine-pitch, validate the PCB stack-up, escape routing, and assembly process before release.
This page combines package, logic-resource, temperature, and technology specifications with family-level design guidance, verified drop-in candidates, and practical PCB considerations that help engineers evaluate the XC4VFX20-11FF672C for a new Virtex-4 design.
Mga alternatibo na pwedeng ilagay na XC4VFX20-11FF672C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
XC4VFX20-11FFG672C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX20-10FF672C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC4VFX20-10FFG672C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX20-12FF672C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX20-12FFG672C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC4VFX20-11FF672C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Virtex-4 FX Field Programmable Gate Array (FPGA) |
| FPGA Family | Virtex-4 FX |
| Speed Grade | -11 |
| Total Cells | 19,224 cells |
| Logic Cells / Logic Blocks | 2,136 |
| Internal Frequency | 1,028 MHz |
| Logic Family | CMOS |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Package Type | 672-BBGA, FCBGA |
| Package Designation | FBGA-672 |
| Bilang ng Pin | 672 pins |
| Ball Count | 672 balls |
| Temperature na Operasyon | 0°C to 85°C |
| Available Family Speed Grades | -12, -11, -10 |
| Device Description | Virtex-4 FX FPGA with 19,224 cells |
| Package Pinout File Format | ASCII text |
| Uri ng Pagpapasok | Surface-mount FCBGA |
| Tindminan RoHS | unknown |
Gabay sa Pin Configuration ng XC4VFX20-11FF672C ascii text
Pin configuration para sa XC4VFX20-11FF672C (ascii text package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC4VFX20-11FF672C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC4VFX20-11FF672C ay nararapat para sa 6 aplikasyons: Telecommunications Data-Path Equipment, Industrial Control and Automation, High-Speed Network Interface Equipment, Video and Image-Processing Pipelines, Test and Measurement Platforms, Programmable Signal-Control Subsystems.
Telecommunications Data-Path Equipment
The XC4VFX20-11FF672C fits telecommunications equipment that needs parallel datapath logic, extensive board-level connectivity, and programmable control functions in one FPGA. Its 19,224 total cells and 2,136 logic cells or logic blocks provide the implementation area required for framing logic, protocol state machines, buffer management, and interface control. The 672-pin FCBGA exposes a large number of connections for source-synchronous interfaces and multi-bit buses. Operating from 0°C to 85°C, the part addresses controlled commercial equipment environments. The practical benefit is a single programmable device that can absorb multiple fixed-function logic components, although careful constraint definition and signal-integrity analysis remain necessary for high-speed interfaces.
Inirekomenda
Industrial Control and Automation
The XC4VFX20-11FF672C is appropriate for industrial controllers that combine deterministic sequencing with extensive sensor, actuator, and communications connectivity. The programmable logic can implement machine-state control, timer blocks, counters, fault handling, and communication adapters, while the 672-ball package provides a high pin count for mixed signal and digital I/O. Its 0°C to 85°C operating range suits many controlled industrial installations. Using a single FPGA rather than several discrete controllers can simplify board partitioning, but designers should verify the 1.2 V core supply, decoupling, configuration-signal behavior, and I/O timing against the device constraints before production release.
Inirekomenda
High-Speed Network Interface Equipment
The XC4VFX20-11FF672C can support network-interface equipment requiring parallel packet processing, buffering, and low-latency control logic. Its listed 1,028 MHz internal frequency and -11 speed grade provide substantial timing performance for digital pipelines, while the large 672-pin FCBGA supports wide buses and multiple external interfaces. A design can partition the FPGA into transmit, receive, buffering, and supervisory logic without relying on several separate interface ICs. The trade-off is routing complexity: the fine-pitch package requires a carefully controlled multilayer PCB, and source-synchronous interfaces need proper constraints, termination, and layer-transition planning.
Inirekomenda
Video and Image-Processing Pipelines
The XC4VFX20-11FF672C is suitable for parallel video or image-processing pipelines that require multiple stages of pixel transport, buffering, and format conversion. The device's 19,224 total cells and 2,136 logic cells or logic blocks can host several parallel datapaths, while the 672-pin package offers the I/O capacity needed for wide pixel buses and control signals. The -11 grade provides a balance between the higher -12 performance grade and the lower -10 grade. Compared with a hardwired processor, the FPGA allows pipeline architecture and resource allocation to be changed through programming. For practical implementation, use a pipelined clocking plan, isolate high-speed buses on suitable PCB layers, and revalidate timing whenever a different speed grade is substituted.
Inirekomenda
Test and Measurement Platforms
The XC4VFX20-11FF672C fits modular test and measurement platforms that need configurable timing, pattern generation, acquisition control, and instrument interfacing. Programmable logic can coordinate triggers, counters, and data-routing functions, while the 672-ball package provides connections for multiple instrument buses and external converters. The 0°C to 85°C range supports laboratory and controlled production environments. The device is particularly useful when measurement sequencing changes frequently, because the control architecture can be updated through a new configuration rather than a hardware respin. Designers must still account for analog-interface isolation, clock jitter, termination, and deterministic configuration startup when integrating the FPGA into the instrument.
Inirekomenda
Programmable Signal-Control Subsystems
The XC4VFX20-11FF672C can serve as a configurable signal-control subsystem when a design requires several synchronized state machines, digital filters, and interface adapters. Its 2,136 logic cells or logic blocks and 19,224 total cells allow parallel processing sections to coexist within one device. The 1.2 V CMOS core and 90 nm process architecture place the part firmly in the Virtex-4 performance class, while the 672-pin package provides extensive connectivity to external converters and sensors. Compared with fixed-function logic, this implementation allows filter coefficients, sequencing, and protocol behavior to be updated through programming. The engineering trade-off is that software familiarity and design-tool support must be evaluated alongside the hardware performance requirement.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC4VFX20-11FF672C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC4VFX20-11FFG672C | XC4VFX20-10FF672C | XC4VFX20-10FFG672C | XC4VFX20-12FF672C | XC4VFX20-12FFG672C |
|---|---|---|---|---|---|---|
| Package | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA |
| Brand | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx |
| FPGA Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -11 | -11 | -10 | -10 | -12 | -12 |
| Total Cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells |
| Logic Cells / Logic Blocks | 2,136 | 2,136 | 2,136 | 2,136 | 2,136 | 2,136 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Operating Temperature | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C |
Pangunahing mga Pagkakaiba
- Same-speed G-designated ordering option preserves the original performance position (kumpara saXC4VFX20-11FFG672C)
- Higher-performance family option for timing-constrained designs (kumpara saXC4VFX20-12FF672C)
- Lower-speed option supports power-sensitive reuse after timing validation (kumpara saXC4VFX20-10FF672C)
Talaan ng Disenyo
Treat the 672-ball FCBGA as a high-density routing problem rather than deriving the footprint from the ball count alone. Download the AMD Virtex-4 package pinout file and use it to confirm power, ground, configuration, reserved, and user I/O assignments. Match the package orientation, ball-pitch geometry, and land pattern to the AMD package drawing, then validate escape routing on the actual PCB stack-up before releasing fabrication output.
Construct separate distribution for the 1.2 V core rail and applicable auxiliary or I/O rails, following the power-decoupling topology specified in the Virtex-4 family documentation. Place the smallest decoupling capacitors directly at the associated device balls and connect them to the correct reference plane with minimal inductance. Do not share sensitive logic return current with noisy interface returns when their noise requirements differ; layer transitions and return-path continuity are as important as nominal rail voltage.
AMD publishes the Virtex-4 package device pinout files in ASCII format for board-level connectivity. Use those files as the authoritative source rather than transcribing pin names from a search listing, especially for the 672-pin package. Keep high-speed interfaces on consistent PCB layers, provide continuous reference planes beneath routed pairs, and apply device-specific I/O timing constraints. When moving between -10, -11, and -12 speed grades, rerun post-route timing on every affected clock domain.
Impormasyon ng Pagsunod sa Kautusan
The AMD Virtex-4 family documentation identifies the device as a 90 nm CMOS FPGA, but no specific RoHS, REACH, halogen-free, or conflict-minerals declarations were identified. AEC-Q100 qualification is not applicable to this FPGA ordering code.