XC4VFX20-11FF672C - Virtex-4 FX FPGA, 19,224 Cells, 672-BBGA | AMD/Xilinx
MPN: XC4VFX20-11FF672C ✗ 停產XC4VFX20-11FF672C 概覽
An FPGA is a programmable digital logic device that allows a system designer to implement combinational and sequential logic, interfaces, processing pipelines, and control functions in a single integrated circuit. Within the semiconductor hierarchy, the XC4VFX20 belongs to the Virtex-4 FX FPGA family, which combines configurable logic resources with large-routing capability for demanding embedded systems. Unlike a fixed-function application-specific integrated circuit, an FPGA allows design changes to be implemented through bitstream programming.
Key device attributes include a 320-resource embedded processing-related count shown in the product listing, 1,253,376 in the same listing, and a 672-ball package offering high I/O connectivity. The device supports the -12, -11, and -10 speed grades, with the -12 grade designated for the highest performance. Its CMOS construction and 90 nm process node reflect the technology generation of the Virtex-4 portfolio, while the large FCBGA package supports the substantial interconnect and power requirements of the device.
The 672-pin FCBGA footprint requires a multi-layer PCB with dense escape routing and careful power-plane construction. Designers should use the AMD Virtex-4 package pinout files when assigning PCB signals, and should treat power, ground, decoupling, and configuration pins according to the package-specific guidance in the Virtex-4 family documentation. The package provides substantially more interconnect capacity than a leaded package, but it also raises sensitivity to assembly workmanship, solder-paste control, and thermal gradients.
Typical applications include telecommunications equipment, industrial control systems, high-speed data processing, network-interface equipment, test and measurement platforms, and embedded control or signal-processing subsystems. In these systems, the device can implement parallel datapaths, protocol interfaces, timing control, and application-specific processing while reducing the number of discrete logic components.
When planning a design, verify the selected -11 speed grade against the required internal and I/O timing, confirm that every power rail meets the DC and AC requirements in the family data sheet, and use AMD package pinout files as the authoritative source for board-level connectivity. Because the package is large and fine-pitch, validate the PCB stack-up, escape routing, and assembly process before release.
This page combines package, logic-resource, temperature, and technology specifications with family-level design guidance, verified drop-in candidates, and practical PCB considerations that help engineers evaluate the XC4VFX20-11FF672C for a new Virtex-4 design.
直接替換替代品,適用於 XC4VFX20-11FF672C — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
XC4VFX20-11FFG672C
✅ 直接替換📋 參考替代品(不在目錄中)
XC4VFX20-10FF672C
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →XC4VFX20-10FFG672C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC4VFX20-12FF672C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC4VFX20-12FFG672C
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
XC4VFX20-11FF672C 最大額定值與電氣特性
| Device Type | Virtex-4 FX Field Programmable Gate Array (FPGA) |
| FPGA Family | Virtex-4 FX |
| Speed Grade | -11 |
| Total Cells | 19,224 cells |
| Logic Cells / Logic Blocks | 2,136 |
| Internal Frequency | 1,028 MHz |
| Logic Family | CMOS |
| Process Technology | 90 nm |
| Core Supply Voltage | 1.2 V |
| Package Type | 672-BBGA, FCBGA |
| Package Designation | FBGA-672 |
| 腳位數 | 672 pins |
| Ball Count | 672 balls |
| 工作溫度 | 0°C to 85°C |
| Available Family Speed Grades | -12, -11, -10 |
| Device Description | Virtex-4 FX FPGA with 19,224 cells |
| Package Pinout File Format | ASCII text |
| 安裝類型 | Surface-mount FCBGA |
| RoHS 狀態 | unknown |
XC4VFX20-11FF672C ascii text 腳位配置指南
XC4VFX20-11FF672C(ascii text 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: XC4VFX20-11FF672C.
請參閱 資料表 以查看完整腳位配置。
典型應用
XC4VFX20-11FF672C 適用於 6 應用s: Telecommunications Data-Path Equipment, Industrial Control and Automation, High-Speed Network Interface Equipment, Video and Image-Processing Pipelines, Test and Measurement Platforms, Programmable Signal-Control Subsystems.
Telecommunications Data-Path Equipment
The XC4VFX20-11FF672C fits telecommunications equipment that needs parallel datapath logic, extensive board-level connectivity, and programmable control functions in one FPGA. Its 19,224 total cells and 2,136 logic cells or logic blocks provide the implementation area required for framing logic, protocol state machines, buffer management, and interface control. The 672-pin FCBGA exposes a large number of connections for source-synchronous interfaces and multi-bit buses. Operating from 0°C to 85°C, the part addresses controlled commercial equipment environments. The practical benefit is a single programmable device that can absorb multiple fixed-function logic components, although careful constraint definition and signal-integrity analysis remain necessary for high-speed interfaces.
推薦
Industrial Control and Automation
The XC4VFX20-11FF672C is appropriate for industrial controllers that combine deterministic sequencing with extensive sensor, actuator, and communications connectivity. The programmable logic can implement machine-state control, timer blocks, counters, fault handling, and communication adapters, while the 672-ball package provides a high pin count for mixed signal and digital I/O. Its 0°C to 85°C operating range suits many controlled industrial installations. Using a single FPGA rather than several discrete controllers can simplify board partitioning, but designers should verify the 1.2 V core supply, decoupling, configuration-signal behavior, and I/O timing against the device constraints before production release.
推薦
High-Speed Network Interface Equipment
The XC4VFX20-11FF672C can support network-interface equipment requiring parallel packet processing, buffering, and low-latency control logic. Its listed 1,028 MHz internal frequency and -11 speed grade provide substantial timing performance for digital pipelines, while the large 672-pin FCBGA supports wide buses and multiple external interfaces. A design can partition the FPGA into transmit, receive, buffering, and supervisory logic without relying on several separate interface ICs. The trade-off is routing complexity: the fine-pitch package requires a carefully controlled multilayer PCB, and source-synchronous interfaces need proper constraints, termination, and layer-transition planning.
推薦
Video and Image-Processing Pipelines
The XC4VFX20-11FF672C is suitable for parallel video or image-processing pipelines that require multiple stages of pixel transport, buffering, and format conversion. The device's 19,224 total cells and 2,136 logic cells or logic blocks can host several parallel datapaths, while the 672-pin package offers the I/O capacity needed for wide pixel buses and control signals. The -11 grade provides a balance between the higher -12 performance grade and the lower -10 grade. Compared with a hardwired processor, the FPGA allows pipeline architecture and resource allocation to be changed through programming. For practical implementation, use a pipelined clocking plan, isolate high-speed buses on suitable PCB layers, and revalidate timing whenever a different speed grade is substituted.
推薦
Test and Measurement Platforms
The XC4VFX20-11FF672C fits modular test and measurement platforms that need configurable timing, pattern generation, acquisition control, and instrument interfacing. Programmable logic can coordinate triggers, counters, and data-routing functions, while the 672-ball package provides connections for multiple instrument buses and external converters. The 0°C to 85°C range supports laboratory and controlled production environments. The device is particularly useful when measurement sequencing changes frequently, because the control architecture can be updated through a new configuration rather than a hardware respin. Designers must still account for analog-interface isolation, clock jitter, termination, and deterministic configuration startup when integrating the FPGA into the instrument.
推薦
Programmable Signal-Control Subsystems
The XC4VFX20-11FF672C can serve as a configurable signal-control subsystem when a design requires several synchronized state machines, digital filters, and interface adapters. Its 2,136 logic cells or logic blocks and 19,224 total cells allow parallel processing sections to coexist within one device. The 1.2 V CMOS core and 90 nm process architecture place the part firmly in the Virtex-4 performance class, while the 672-pin package provides extensive connectivity to external converters and sensors. Compared with fixed-function logic, this implementation allows filter coefficients, sequencing, and protocol behavior to be updated through programming. The engineering trade-off is that software familiarity and design-tool support must be evaluated alongside the hardware performance requirement.
推薦
推薦產品摘要
工程參考資料,適用於 XC4VFX20-11FF672C — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | XC4VFX20-11FFG672C | XC4VFX20-10FF672C | XC4VFX20-10FFG672C | XC4VFX20-12FF672C | XC4VFX20-12FFG672C |
|---|---|---|---|---|---|---|
| Package | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA | 672-pin FCBGA |
| Brand | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx | AMD/Xilinx |
| FPGA Family | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX | Virtex-4 FX |
| Speed Grade | -11 | -11 | -10 | -10 | -12 | -12 |
| Total Cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells | 19,224 cells |
| Logic Cells / Logic Blocks | 2,136 | 2,136 | 2,136 | 2,136 | 2,136 | 2,136 |
| Process Technology | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS | 90 nm CMOS |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Operating Temperature | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C | 0°C to 85°C |
主要差異化特點
- Same-speed G-designated ordering option preserves the original performance position (對比XC4VFX20-11FFG672C)
- Higher-performance family option for timing-constrained designs (對比XC4VFX20-12FF672C)
- Lower-speed option supports power-sensitive reuse after timing validation (對比XC4VFX20-10FF672C)
設計說明
Treat the 672-ball FCBGA as a high-density routing problem rather than deriving the footprint from the ball count alone. Download the AMD Virtex-4 package pinout file and use it to confirm power, ground, configuration, reserved, and user I/O assignments. Match the package orientation, ball-pitch geometry, and land pattern to the AMD package drawing, then validate escape routing on the actual PCB stack-up before releasing fabrication output.
Construct separate distribution for the 1.2 V core rail and applicable auxiliary or I/O rails, following the power-decoupling topology specified in the Virtex-4 family documentation. Place the smallest decoupling capacitors directly at the associated device balls and connect them to the correct reference plane with minimal inductance. Do not share sensitive logic return current with noisy interface returns when their noise requirements differ; layer transitions and return-path continuity are as important as nominal rail voltage.
AMD publishes the Virtex-4 package device pinout files in ASCII format for board-level connectivity. Use those files as the authoritative source rather than transcribing pin names from a search listing, especially for the 672-pin package. Keep high-speed interfaces on consistent PCB layers, provide continuous reference planes beneath routed pairs, and apply device-specific I/O timing constraints. When moving between -10, -11, and -12 speed grades, rerun post-route timing on every affected clock domain.
合規資訊
The AMD Virtex-4 family documentation identifies the device as a 90 nm CMOS FPGA, but no specific RoHS, REACH, halogen-free, or conflict-minerals declarations were identified. AEC-Q100 qualification is not applicable to this FPGA ordering code.