XC7A12T-3CPG238E - -3 Speed Grade Artix-7 FPGA | Xilinx
MPN: XC7A12T-3CPG238E ✓ NakahandaXC7A12T-3CPG238E Ulas
An FPGA is a semiconductor whose digital logic, interconnect, and configurable I/O blocks are programmed after manufacture. Artix-7 devices belong to the broader FPGA and programmable-logic hierarchy, combining configurable logic, block RAM, DSP resources, and programmable I/O in one package. This makes the XC7A12T-3CPG238E suitable for embedded systems that need hardware-level parallelism and design flexibility without the resource level of a larger FPGA.
The catalog listing identifies 12,800 logic cells, 112 I/O, 238 terminals, and a -3 device speed designation. Its square LFBGA package places the device in the CSBGA-238 package family, providing a dense PCB land pattern suitable for compact industrial, communications, instrumentation, and embedded-control equipment. The part is also identified as RoHS compliant by its assembly listing.
The XC7A12T-3CPG238E shares the XC7A12T device designation and 238-ball package with speed-grade and temperature-grade variants. This common mechanical and logical basis supports simplified product-family planning, although a migration must still account for timing closure, junction-temperature limits, power characteristics, configuration compatibility, and the exact ordering code. The AMD Artix-7 package pinout files should be used to validate every PCB connection before fabrication.
Typical uses include industrial data acquisition, camera and image-processing pipelines, communications interfaces, embedded control, test equipment, and sensor-processing systems. The -3 speed grade is appropriate when timing performance is a principal selection factor. Designers should define clock constraints, pin assignments, power rails, and configuration requirements early in the schematic and PCB-layout process.
PCB implementation requires careful power-plane distribution, decoupling, and escape-routing strategy for the 238-ball BGA. Use the manufacturer package drawing and pinout files for land patterns, ball assignments, thermal-pad treatment, and assembly constraints. Because fine-pitch BGA assembly can hide shorts and opens, inspection methods and soldering profile must match the package requirements.
This product record combines package, logic-resource, ordering-code, and lifecycle information with same-package family comparisons and practical implementation guidance. It also distinguishes mechanical compatibility from timing-grade and environmental differences, helping engineers select a replacement without overlooking the constraints that determine production suitability.
Mga alternatibo na pwedeng ilagay na XC7A12T-3CPG238E — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7A12T-3CPG238E (parehas na form factor at footprint) — pagkakaiba sa Device Type, Logic Cells, Package, Process Technology, Speed Grade.
XC7A12T-2CPG238C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7A12T-1CPG238C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7A12T-1CPG238I
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC7A12T-2CPG238I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7A12T-L2CPG238E
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC7A12T-3CPG238E Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Artix-7 field-programmable gate array (FPGA) |
| Logic Cell Count | 12,800 cells |
| I/O Count | 112 I/O |
| Speed Grade | -3 |
| Packhaging | 238-ball LFBGA, CSBGA-238 |
| Terminal Count | 238 terminals |
| Terminal Form | Ball |
| Package Shape | Square |
| Uri ng Pagpapasok | Surface-mount BGA |
| Programmable Logic Type | FPGA |
| Tindminan RoHS | Compliant |
| Product Series | Artix-7 |
| Device Designation | XC7A12T |
Gabay sa Pin Configuration ng XC7A12T-3CPG238E square
Pin configuration para sa XC7A12T-3CPG238E (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7A12T-3CPG238E.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7A12T-3CPG238E ay nararapat para sa 6 aplikasyons: Industrial Data Acquisition, Industrial Sensor Networking, Communications Interface, Camera and Image Preprocessing, Test and Measurement, Embedded Control Platform.
Industrial Data Acquisition
The XC7A12T-3CPG238E fits compact industrial acquisition systems that must combine parallel sensor interfaces, control logic, and protocol handling in a single programmable device. Its 12,800 logic cells provide capacity for control paths, acquisition sequencing, status logging, and interface translation, while 112 I/O simplify connections to external converters and sensors. The -3 speed designation is useful when acquisition pipelines require tighter timing margins. Place the device in a multilayer PCB with short point-to-point routing, use the official 238-ball land pattern, and keep high-current switching nodes away from sensitive input and clock nets.
Inirekomenda
Industrial Sensor Networking
The XC7A12T-3CPG238E can support distributed sensor nodes that require deterministic parallel sensing, local filtering, and communications framing. The FPGA's 12,800 logic cells allow engineers to implement acquisition control, threshold logic, data packing, and interface-specific state machines concurrently. Its 112 I/O provide dedicated resources for sensors, interrupts, and communications, while the -3 grade supports timing-sensitive processing. For industrial deployment, review the exact E-grade temperature limits, isolate noisy actuator drivers, provide local decoupling at supply balls, and verify the complete design against the 238-ball package constraints.
Inirekomenda
Communications Interface
The XC7A12T-3CPG238E is suitable for protocol converters and communications front ends that benefit from programmable parallel data paths. Its 12,800 logic cells can support framing, CRC generation, channel alignment, buffering, and supervisory logic, while 112 I/O allow high-throughput source-synchronous interfaces. The -3 speed designation helps preserve margin in clocked datapaths. Engineers should use the manufacturer package pinout to select clock-capable and regular I/O pins, keep input and output timing constraints synchronized, and route clocks with controlled return paths to minimize data corruption and electromagnetic interference.
Inirekomenda
Camera and Image Preprocessing
The XC7A12T-3CPG238E can implement camera-facing pixel transport, timing generation, preprocessing, and capture control in compact embedded vision systems. Its configurable logic allows parallel pixel lanes and control signals to be synchronized, while the 12,800-cell resource level is suitable for moderate pipeline stages and interface adapters rather than unrestricted image processing. The -3 grade supports demanding clock domains. Keep sensor data traces short and matched, terminate clocks according to the interface specification, isolate switching outputs, and validate setup and hold timing for every source-synchronous path before hardware release.
Inirekomenda
Test and Measurement
The XC7A12T-3CPG238E can implement deterministic timing, sequence, and protocol logic for compact test and measurement instruments. The 12,800 logic cells allow parallel execution of acquisition sequences, trigger matrices, status checks, and data-format conversion, while 112 I/O provide connections to instruments and fixtures. Its -3 designation supports timing-sensitive control paths and counters. Designers should isolate high-energy switching stages, use controlled clock distribution, validate input thresholds and output timing for every supported I/O standard, and reserve the configuration pins exactly as defined by the manufacturer package documentation.
Inirekomenda
Embedded Control Platform
The XC7A12T-3CPG238E works well as the programmable control core of an embedded equipment platform, combining peripheral bridges, state machines, timing, and supervisory logic in one device. Its 12,800 logic cells and 112 I/O are well matched to medium-complexity control boards requiring flexible pin assignment. The -3 speed grade provides additional timing margin for coordinated control paths. A robust implementation should separate sensitive analog and reference circuitry from FPGA supply currents, use multiple local bypass capacitors as specified by the device guidance, provide clean configuration startup, and test boundary scan and production programming procedures.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7A12T-3CPG238E — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7A12T-2CPG238C | XC7A12T-1CPG238C | XC7A12T-1CPG238I | XC7A12T-2CPG238I | XC7A12T-L2CPG238E |
|---|---|---|---|---|---|---|
| Brand | Xilinx Inc. | Xilinx Inc. | Xilinx Inc. | Xilinx Inc. | Xilinx Inc. | Xilinx Inc. |
| Package | 238-LFBGA, CSBGA-238 | 238-LFBGA, CSPBGA-238 - same package family | 238-LFBGA, CSPBGA-238 - same package family | 238-LFBGA, CSPBGA-238 - same package family | 238-LFBGA, CSPBGA-238 - same package family | 238-LFBGA, CSBGA-238 - same package family |
| Speed Designation | -3 | -2 | -1 | -1 | -2 | L2 |
| Temperature Suffix | E | C | C | I | I | E |
Pangunahing mga Pagkakaiba
- Higher -3 speed designation within the same XC7A12T package family (kumpara saXC7A12T-2CPG238C)
- Extended E suffix for the target ordering code (kumpara saXC7A12T-2CPG238C)
- Compatibility with the established XC7A12T-2CPG238C platform (kumpara saXC7A12T-2CPG238C)
- Retains the E suffix while offering an L2 ordering option (kumpara saXC7A12T-L2CPG238E)
Talaan ng Disenyo
Build the PCB from the official Artix-7 238-ball package drawing and pinout file rather than a generic CSBGA footprint. Confirm ball coordinates, exposed thermal-pad requirements, solder-mask and paste details, and assembly tolerances before release. Provide clean escape routing from all BGA balls and inspect fine-pitch assemblies with X-ray or an equivalent process capable of detecting bridged balls.
Separate FPGA core, I/O, and auxiliary supply routing as required by the device power architecture, and place local high-frequency decoupling directly at the relevant package balls. Keep high-current switching supplies and external regulators physically separated from sensitive clock and user-I/O routing. Validate voltage tolerances, power-up sequencing, and startup current before applying the power rails in hardware.
Assign clocks only to pins qualified for the intended clocking function, constrain all clock domains explicitly, and maintain controlled return paths beneath high-speed interfaces. Keep source-synchronous data routing short and length-matched where required by the external device. Review every pin against the Artix-7 package pinout because a valid package position does not guarantee support for every I/O standard.
Do not treat a shared 238-ball footprint as proof of an interchangeable production part. The speed designation, temperature suffix, configuration requirements, timing limits, power behavior, and qualification can change across ordering codes. For every proposed migration, regenerate constraints and bitstreams, rerun timing and power signoff, verify the manufacturing test plan, and confirm the exact ordering code before purchase.
Impormasyon ng Pagsunod sa Kautusan
The assembly listing identifies the exact XC7A12T-3CPG238E as RoHS compliant. No explicit REACH, lead-free, halogen-free, conflict-minerals, or automotive-qualification declaration was identified.
