XC7K160T-L2FBG676E - 162K Kintex-7 FPGA | AMD Xilinx
MPN: XC7K160T-L2FBG676E ✓ NakahandaXC7K160T-L2FBG676E Ulas
A Kintex-7 FPGA belongs to the broader FPGA and programmable-logic hierarchy, which sits above CPLDs and fixed-function logic within semiconductor and embedded processing systems. Unlike an application-specific integrated circuit, an FPGA combines millions of programmable gates, configurable digital interfaces, and dedicated hardware blocks into one reconfigurable device. This allows engineers to implement parallel processing, protocol bridging, data acquisition, control logic, and high-speed connectivity while retaining flexibility for design revisions.
The XC7K160T-L2FBG676E provides 162,240 logic cells and 400 I/O in the FBG676 package. Its reported maximum clock frequency is 710 MHz, and the core-voltage listing spans 970 mV to 1.03 V. Dedicated block RAM, DSP resources, transceivers, clock-management circuitry, and selectable I/O standards make the device suitable for parallel processing pipelines, network interfaces, industrial controls, test equipment, and embedded video systems. The extended temperature designation supports use across industrial temperature conditions when the associated system requirements are met.
The -2 speed designation is important because FPGA timing closure depends on the selected speed grade, tool version, device configuration, I/O standard, routing, and environmental conditions. Reported clock and voltage figures therefore describe device capabilities rather than guaranteed system-level performance. Designers should use the AMD Vivado design suite for implementation and timing analysis, then verify the complete interface against the Kintex-7 data sheet and the selected board configuration. The large BGA package also demands careful power delivery, decoupling, thermal management, and high-speed layout discipline.
Typical applications include industrial automation, serial-network interface bridging, high-speed data acquisition, communications infrastructure, control systems, and embedded signal processing. In these systems, the FPGA can execute parallel algorithms, implement custom interfaces, and coordinate data movement between external memory, network transceivers, sensors, and host processors. The -2 grade is appropriate when a design requires more timing margin than a lower-speed option without moving to the -3 grade, particularly in industrial environments where sustained thermal performance is important.
Power and layout planning should begin before schematic capture. Separate clean supplies and sensitive analog rails where the design requires them, place decoupling capacitors at the appropriate power balls, provide low-impedance ground planes, and follow the manufacturer’s ball-map and power-architecture guidance. A 676-ball FCBGA also requires a mechanically suitable substrate or interposer and assembly process capable of handling its pad geometry and thermal requirements.
This page combines the verified package, logic-cell, process, voltage, clock, and I/O characteristics with application guidance, design checks, and same-package Kintex-7 alternatives. The comparison focuses on package, speed grade, temperature grade, and device resources so engineers can identify a likely replacement while still completing a full pin, timing, power, and lifecycle review before redesign approval.
Mga alternatibo na pwedeng ilagay na XC7K160T-L2FBG676E — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7K160T-L2FBG676E (parehas na form factor at footprint) — pagkakaiba sa Package, Speed Grade, Device Type, Process Technology, Block RAM.
XC7K160T-3FBG676E
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7K160T-2FBG676I
✅ Drop-InMagkontak para sa presyo
XC7K160T-1FBG676I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7K160T-2FBG676E
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7K160T-1FBG676E
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7K160T-L2FBG676E Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Kintex-7 field-programmable gate array |
| Logic Cells | 162,240 cells |
| Block RAM | 11,700 Kb |
| Process Technology | 28 nm CMOS |
| Maksimum na Taktiko ng Oras | 710 MHz |
| Core Voltage Range | 970 mV to 1.03 V |
| User I/O Count | 400 I/O |
| Packhaging | 676-ball flip-chip BGA (FBG676) |
| Package Ball Count | 676 balls |
| Speed Grade | -2 |
| Temperature Grade | E suffix extended commercial grade |
| Device Family | Kintex-7 |
| Packaging Form | Tray |
Gabay sa Pin Configuration ng XC7K160T-L2FBG676E 676 balls
Pin configuration para sa XC7K160T-L2FBG676E (676 balls package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7K160T-L2FBG676E.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7K160T-L2FBG676E ay nararapat para sa 6 aplikasyons: Industrial Automation and Control, High-Speed Data Acquisition, Communications and Protocol Bridging, Test and Measurement Equipment, Embedded Signal Processing, Network and Storage Interface Controllers.
Industrial Automation and Control
The XC7K160T-L2FBG676E fits industrial controllers that combine deterministic I/O, parallel control logic, and high-speed data acquisition in one device. Its 162,240 logic cells and 11,700 Kb of block RAM provide substantial capacity for protocol handling, motion-control pipelines, and supervisory logic, while 400 I/O support multiple sensor, actuator, and communications interfaces. The -2 speed grade offers useful timing margin without automatically selecting the power-hungry -3 option. Engineers should use Vivado for industrial timing constraints and complete thermal analysis at the highest expected ambient temperature. The 676-ball FCBGA also requires a robust board substrate, local decoupling, and careful separation between sensitive inputs and high-current output circuitry.
High-Speed Data Acquisition
The XC7K160T-L2FBG676E is suitable for parallel ADC, sensor, and test-data acquisition systems where multiple input streams must be filtered, correlated, and packed in real time. The 400 available I/O provide substantial parallel connectivity, while the 162,240-cell fabric supports channel-specific pipelines and the 11,700 Kb of block RAM can buffer samples between acquisition and processing stages. Using the -2 grade can improve timing margin over a -1 design, but clocking, input thresholds, and implemented I/O standards must match the source devices. Vivado constraints and timing reports should be generated from the actual board schematics, and the FBG676 power and ground network must support simultaneous switching without disturbing sensitive measurement paths.
Communications and Protocol Bridging
The XC7K160T-L2FBG676E can implement communications gateways, packet processors, protocol converters, and clock-domain-crossing systems within the Kintex-7 architecture. Parallel logic can accelerate framing, error checking, buffering, and header processing, while block RAM supports packet queues and the programmable I/O supports multiple interface widths. The -2 speed grade provides additional timing margin over the -1 option, which can be valuable in designs with registered outputs, external memories, or moderately complex routing. Engineers should verify each transceiver or hard interface against its speed, reference-clock, and package constraints. Because the FPGA is configured in parallel with board-level connectivity, complete pin assignments, PLL planning, and signal-integrity simulations are required before fabrication.
Test and Measurement Equipment
The XC7K160T-L2FBG676E is well matched to modular test equipment that needs configurable timing, dense acquisition channels, and real-time pattern processing. Its 400 I/O, 11,700 Kb of block RAM, and 162,240 logic cells allow instrument designers to combine acquisition, trigger logic, sequencing, and digital correction in one device. The -2 speed grade can support more demanding internal pipelines than a -1 implementation while avoiding the maximum performance and thermal demand associated with a -3 grade. Designers should use Vivado timing analysis for all instrument clocks and budget acquisition-chain latency explicitly. The FBG676 footprint also requires careful analog and digital partitioning on the PCB, including isolated return paths for sensitive front-end circuitry.
Embedded Signal Processing
The XC7K160T-L2FBG676E supports embedded DSP, filtering, correlation, and fixed-point signal-processing pipelines where parallel architecture provides a practical throughput advantage over a sequential processor. Its 162,240 logic cells and 11,700 Kb of block RAM can divide work across independent channels, while the -2 grade supplies additional timing headroom for multiply-accumulate, interpolation, and control loops. The exact throughput must be calculated from the selected clock and arithmetic mapping rather than inferred from the cell count. Vivado implementation should be checked for DSP and block-RAM placement, clock skew, and routing congestion. Thermal design must also reflect the sustained switching activity of a real signal-processing workload rather than a low-utilization estimate.
Network and Storage Interface Controllers
The XC7K160T-L2FBG676E can implement storage controllers, memory-interface bridges, and network data-plane functions that require deterministic timing and flexible I/O. The 162,240-cell fabric accommodates control logic and transaction pipelines, while 11,700 Kb of block RAM supports buffering, descriptors, and timing alignment. The -2 speed grade can benefit designs with demanding external interfaces or long routing paths, although actual timing closure remains design-specific. Engineers should validate memory timing, arbitration behavior, and I/O standards in Vivado. Because the FBG676 package is large and power-dense, the PCB needs a carefully partitioned power grid, adequate return paths, and thermal analysis that covers both static and high-throughput operating modes.
Impormasyon ng Talumpati sa Engineering for XC7K160T-L2FBG676E — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7K160T-3FBG676E | XC7K160T-2FBG676I | XC7K160T-1FBG676I | XC7K160T-2FBG676E | XC7K160T-1FBG676E |
|---|---|---|---|---|---|---|
| Package | 676-ball flip-chip BGA (FBG676) | 676-ball flip-chip BGA (FBG676) | 676-ball flip-chip BGA (FBG676) | 676-ball flip-chip BGA (FBG676) | 676-ball flip-chip BGA (FBG676) | 676-ball flip-chip BGA (FBG676) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 | Kintex-7 |
| Speed Grade | -2 | -3, one grade faster | -2, same grade | -1, one grade lower | -2, same grade | -1, one grade lower |
| Temperature Designation | E | E | I | I | E | E |
Pangunahing mga Pagkakaiba
- Balanced -2 speed grade for timing margin and power (kumpara saXC7K160T-1FBG676I)
- E temperature designation matches extended-commercial variants (kumpara saXC7K160T-2FBG676I)
- Lower performance demand than the -3 FBG676E option (kumpara saXC7K160T-3FBG676E)
Talaan ng Disenyo
Design the FBG676 power tree from the package-specific power and ground balls rather than distributing rails by package position alone. Separate the logic core, I/O, auxiliary, and transceiver supplies according to the manufacturer power architecture, and verify whether any rails require sequencing. Place the required bulk and high-frequency decoupling capacitance close to the assigned balls, with short, low-impedance connections and a continuous ground reference. Use Vivado power analysis with realistic clocking, I/O activity, and utilization; validate worst-case voltage, temperature, and process corners before releasing the power supply design.
Thermal design should be based on maximum sustained FPGA activity rather than average laboratory utilization. The -2 grade can consume more power than a lower-speed Kintex-7 option when the same design is active, so identify the dominant contribution from core logic, I/O, memory, or transceiver blocks. Model the PCB, package, thermal vias, heat spreader, and enclosure together, then check the calculated junction temperature against the selected E-grade limits. Provide copper area around the package where the substrate permits, maintain uninterrupted ground planes, and avoid placing heat sources or airflow restrictions directly beneath the BGA.
Use the exact FBG676 ball map and Vivado package file as the authority for every pin assignment. Group high-speed interfaces according to their bank and clock requirements, and keep clock, transceiver, and sensitive control routing away from noisy switching paths where the topology permits. Preserve continuous reference planes beneath escape-routed signals, match length according to interface-level rather than generic FPGA rules, and avoid routing through split planes. The large BGA escape-routing region should be planned as a constraint-driven layout so power, ground, and high-speed pairs can escape without last-minute layer changes.
Do not treat an alternative MPN as interchangeable solely because it uses the FBG676 package. Speed-grade changes can alter timing margin and power, while the I and E suffixes affect environmental requirements. Before substitution, compare the complete AMD ordering code, obtain the matching package file, regenerate constraints, and rerun implementation and static timing analysis. Also verify configuration-memory compatibility, transceiver resources, supported I/O standards, lifecycle status, and assembly requirements. A successful footprint match alone does not establish electrical, thermal, or qualification equivalence.
Impormasyon ng Pagsunod sa Kautusan
Compliance declarations were not identified in the manufacturer or distributor records reviewed. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the current AMD product documentation before release.