AMD

XC7K160T-L2FBG676E - 162K Kintex-7 FPGA | AMD Xilinx

MPN: XC7K160T-L2FBG676E ✓ פעיל
970 mV to 1.03 V Vdss 676-ball flip-chip BGA (FBG676) Package 710 MHz Speed
כמות הזמנה מינימלית: 1 |

XC7K160T-L2FBG676E סקירה

The AMD Xilinx XC7K160T-L2FBG676E is a Kintex-7 field-programmable gate array with 162,240 logic cells, a 28 nm CMOS process, and a 676-ball flip-chip BGA package. It combines programmable logic resources with 11,700 Kb of block RAM, high-speed serial transceivers, memory interfaces, and clock-management resources in a device intended for demanding embedded, communications, and signal-processing systems. The -2 speed grade targets a balance between operating performance and power efficiency, while the E suffix identifies the specified environmental option.

A Kintex-7 FPGA belongs to the broader FPGA and programmable-logic hierarchy, which sits above CPLDs and fixed-function logic within semiconductor and embedded processing systems. Unlike an application-specific integrated circuit, an FPGA combines millions of programmable gates, configurable digital interfaces, and dedicated hardware blocks into one reconfigurable device. This allows engineers to implement parallel processing, protocol bridging, data acquisition, control logic, and high-speed connectivity while retaining flexibility for design revisions.

The XC7K160T-L2FBG676E provides 162,240 logic cells and 400 I/O in the FBG676 package. Its reported maximum clock frequency is 710 MHz, and the core-voltage listing spans 970 mV to 1.03 V. Dedicated block RAM, DSP resources, transceivers, clock-management circuitry, and selectable I/O standards make the device suitable for parallel processing pipelines, network interfaces, industrial controls, test equipment, and embedded video systems. The extended temperature designation supports use across industrial temperature conditions when the associated system requirements are met.

The -2 speed designation is important because FPGA timing closure depends on the selected speed grade, tool version, device configuration, I/O standard, routing, and environmental conditions. Reported clock and voltage figures therefore describe device capabilities rather than guaranteed system-level performance. Designers should use the AMD Vivado design suite for implementation and timing analysis, then verify the complete interface against the Kintex-7 data sheet and the selected board configuration. The large BGA package also demands careful power delivery, decoupling, thermal management, and high-speed layout discipline.

Typical applications include industrial automation, serial-network interface bridging, high-speed data acquisition, communications infrastructure, control systems, and embedded signal processing. In these systems, the FPGA can execute parallel algorithms, implement custom interfaces, and coordinate data movement between external memory, network transceivers, sensors, and host processors. The -2 grade is appropriate when a design requires more timing margin than a lower-speed option without moving to the -3 grade, particularly in industrial environments where sustained thermal performance is important.

Power and layout planning should begin before schematic capture. Separate clean supplies and sensitive analog rails where the design requires them, place decoupling capacitors at the appropriate power balls, provide low-impedance ground planes, and follow the manufacturer’s ball-map and power-architecture guidance. A 676-ball FCBGA also requires a mechanically suitable substrate or interposer and assembly process capable of handling its pad geometry and thermal requirements.

This page combines the verified package, logic-cell, process, voltage, clock, and I/O characteristics with application guidance, design checks, and same-package Kintex-7 alternatives. The comparison focuses on package, speed grade, temperature grade, and device resources so engineers can identify a likely replacement while still completing a full pin, timing, power, and lifecycle review before redesign approval.

חלופות תחליף ישיר עבור XC7K160T-L2FBG676E — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם XC7K160T-L2FBG676E (אותו גורם צורה וטביעת רגל) — שונים ב Package, Speed Grade, Device Type, Process Technology, Block RAM.

AMD
Package: 676-BBGA, FCBGA
Speed Grade: -1
Device Type: Kintex-7 Field-Programmable Gate Array (FPGA)
השווה עם XC7K160T-L2FBG676E →
AMD
Package: 676-pin lidless FCBGA (FBG676)
Speed Grade: -3
Block RAM: 11,980,800 bits (11.98 Mb)
השווה עם XC7K160T-L2FBG676E →

XC7K160T-3FBG676E

✅ Drop-In
AMD
📦 676-ball flip-chip BGA (FBG676)
Kintex-7 Field-Programmable Gate Array · 162,240 cells · 12,675 CLBs · 400 I/Os · 11,980,800 bits (11.98 Mb) · 28 nm CMOS · 1.0 V · 1412 MHz

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XC7K160T-2FBG676I

✅ Drop-In
📦 676-ball flip-chip BGA (FBG676)
מפרטים תואמים

צור קשר לקבלת מחיר

XC7K160T-1FBG676I

✅ Drop-In
AMD
📦 676-ball flip-chip BGA (FBG676)
Kintex-7 Field-Programmable Gate Array (FPGA) · 162,240 LE · 25,350 ALM · 400 I/O · 11.43 Mbit · 28 nm · 970 mV to 1.03 V · 1.2 V to 3.3 V

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

XC7K160T-2FBG676E

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 676-ball flip-chip BGA (FBG676)
Uses the same -2 speed grade and E designation with the same FBG676 package; verify exact ordering and configuration differences before substitution.

📋 חלופה להתייחסות (לא בקטלוג)

XC7K160T-1FBG676E

✅ Drop-In ⚠️ מפרטים לא מאומתים
📦 676-ball flip-chip BGA (FBG676)
Uses the lower -1 speed grade while retaining the E designation and FBG676 package; timing margin may be lower than the -2 target.

📋 חלופה להתייחסות (לא בקטלוג)

XC7K160T-L2FBG676E דירוגים מרביים ומאפיינים חשמליים

Device Type Kintex-7 field-programmable gate array
Logic Cells 162,240 cells
Block RAM 11,700 Kb
Process Technology 28 nm CMOS
תדר שעון מקסימלי 710 MHz
Core Voltage Range 970 mV to 1.03 V
User I/O Count 400 I/O
מארז 676-ball flip-chip BGA (FBG676)
Package Ball Count 676 balls
Speed Grade -2
Temperature Grade E suffix extended commercial grade
Device Family Kintex-7
Packaging Form Tray

מדריך תצורת פינים של XC7K160T-L2FBG676E 676 balls

תצורת פינים עבור XC7K160T-L2FBG676E (מארזת 676 balls). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 676 balls עבור XC7K160T-L2FBG676E

אין נתוני פריסת פינים מפורטים עבור XC7K160T-L2FBG676E.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

XC7K160T-L2FBG676E מתאים עבור 6 יישוםs: Industrial Automation and Control, High-Speed Data Acquisition, Communications and Protocol Bridging, Test and Measurement Equipment, Embedded Signal Processing, Network and Storage Interface Controllers.

🏭

Industrial Automation and Control

The XC7K160T-L2FBG676E fits industrial controllers that combine deterministic I/O, parallel control logic, and high-speed data acquisition in one device. Its 162,240 logic cells and 11,700 Kb of block RAM provide substantial capacity for protocol handling, motion-control pipelines, and supervisory logic, while 400 I/O support multiple sensor, actuator, and communications interfaces. The -2 speed grade offers useful timing margin without automatically selecting the power-hungry -3 option. Engineers should use Vivado for industrial timing constraints and complete thermal analysis at the highest expected ambient temperature. The 676-ball FCBGA also requires a robust board substrate, local decoupling, and careful separation between sensitive inputs and high-current output circuitry.

🖥️

High-Speed Data Acquisition

The XC7K160T-L2FBG676E is suitable for parallel ADC, sensor, and test-data acquisition systems where multiple input streams must be filtered, correlated, and packed in real time. The 400 available I/O provide substantial parallel connectivity, while the 162,240-cell fabric supports channel-specific pipelines and the 11,700 Kb of block RAM can buffer samples between acquisition and processing stages. Using the -2 grade can improve timing margin over a -1 design, but clocking, input thresholds, and implemented I/O standards must match the source devices. Vivado constraints and timing reports should be generated from the actual board schematics, and the FBG676 power and ground network must support simultaneous switching without disturbing sensitive measurement paths.

🌐

Communications and Protocol Bridging

The XC7K160T-L2FBG676E can implement communications gateways, packet processors, protocol converters, and clock-domain-crossing systems within the Kintex-7 architecture. Parallel logic can accelerate framing, error checking, buffering, and header processing, while block RAM supports packet queues and the programmable I/O supports multiple interface widths. The -2 speed grade provides additional timing margin over the -1 option, which can be valuable in designs with registered outputs, external memories, or moderately complex routing. Engineers should verify each transceiver or hard interface against its speed, reference-clock, and package constraints. Because the FPGA is configured in parallel with board-level connectivity, complete pin assignments, PLL planning, and signal-integrity simulations are required before fabrication.

🔧

Test and Measurement Equipment

The XC7K160T-L2FBG676E is well matched to modular test equipment that needs configurable timing, dense acquisition channels, and real-time pattern processing. Its 400 I/O, 11,700 Kb of block RAM, and 162,240 logic cells allow instrument designers to combine acquisition, trigger logic, sequencing, and digital correction in one device. The -2 speed grade can support more demanding internal pipelines than a -1 implementation while avoiding the maximum performance and thermal demand associated with a -3 grade. Designers should use Vivado timing analysis for all instrument clocks and budget acquisition-chain latency explicitly. The FBG676 footprint also requires careful analog and digital partitioning on the PCB, including isolated return paths for sensitive front-end circuitry.

📡

Embedded Signal Processing

The XC7K160T-L2FBG676E supports embedded DSP, filtering, correlation, and fixed-point signal-processing pipelines where parallel architecture provides a practical throughput advantage over a sequential processor. Its 162,240 logic cells and 11,700 Kb of block RAM can divide work across independent channels, while the -2 grade supplies additional timing headroom for multiply-accumulate, interpolation, and control loops. The exact throughput must be calculated from the selected clock and arithmetic mapping rather than inferred from the cell count. Vivado implementation should be checked for DSP and block-RAM placement, clock skew, and routing congestion. Thermal design must also reflect the sustained switching activity of a real signal-processing workload rather than a low-utilization estimate.

🖥️

Network and Storage Interface Controllers

The XC7K160T-L2FBG676E can implement storage controllers, memory-interface bridges, and network data-plane functions that require deterministic timing and flexible I/O. The 162,240-cell fabric accommodates control logic and transaction pipelines, while 11,700 Kb of block RAM supports buffering, descriptors, and timing alignment. The -2 speed grade can benefit designs with demanding external interfaces or long routing paths, although actual timing closure remains design-specific. Engineers should validate memory timing, arbitration behavior, and I/O standards in Vivado. Because the FBG676 package is large and power-dense, the PCB needs a carefully partitioned power grid, adequate return paths, and thermal analysis that covers both static and high-throughput operating modes.

What are the key specifications of XC7K160T-L2FBG676E that engineers should know?
The XC7K160T-L2FBG676E is a 28 nm Kintex-7 FPGA with 162,240 logic cells, 11,700 Kb of block RAM, 400 user I/O, and a maximum reported clock frequency of 710 MHz. It uses the -2 speed grade and is supplied in a 676-ball flip-chip BGA package. According to the AMD Kintex-7 data sheet and package-specific product documentation, its core operating voltage is listed from 970 mV to 1.03 V. These figures define its broad capacity, but final timing, power, and I/O performance must be verified in Vivado using the actual constraints.
Where can I download the XC7K160T-L2FBG676E datasheet?
The XC7K160T-L2FBG676E data sheet and package information are available through the linked AMD/Xilinx documentation and the XC7K160T technical-reference links on this page. The device belongs to the Kintex-7 family, so the family data sheet defines the common architecture, while the package-specific material identifies the FBG676 ball map, power architecture, and supported interfaces. Use the exact device and package suffix when reviewing timing characteristics, pin assignments, and power requirements. The data sheet should also be matched to the Vivado release used for the final implementation.
Where can I find the XC7K160T-L2FBG676E pinout and FBG676 ball map?
The XC7K160T-L2FBG676E pin assignments are documented in the AMD Kintex-7 package data and the FBG676 ball-map files used by Vivado. Because a 676-ball FCBGA is too large to represent accurately in a simplified inline pin list, use the manufacturer’s package-specific pinout rather than a generic BGA drawing. The complete ball map is essential for power, ground, configuration, clock, transceiver, and user-I/O assignments. Export the matching package file from Vivado and cross-check every schematic symbol against that file before PCB release.
Is XC7K160T-L2FBG676E suitable for industrial applications?
The XC7K160T-L2FBG676E can suit industrial equipment when its E temperature option, system thermal design, and qualification requirements satisfy the application. Its -2 speed grade provides a mid-range performance option, while the 162,240 logic cells and 11,700 Kb of block RAM support moderate parallel-processing and buffering requirements. According to the Kintex-7 family documentation, operating limits depend on the selected device suffix and grade. Confirm the exact environmental limits, production status, and any sector-specific qualification requirements before using the FPGA as a sole safety or control element.
How does XC7K160T-L2FBG676E compare with XC7K160T-3FBG676E?
The principal difference is speed grade: the XC7K160T-L2FBG676E is the -2 option, while the XC7K160T-3FBG676E is the faster -3 option. Both are Kintex-7 devices listed with 162,240 logic cells, 11,700 Kb of block RAM, 400 I/O, and the FBG676 package. The -3 grade can provide additional timing performance, but it may consume more power and require greater cooling. Choose the -2 device when its timing closure is adequate and power efficiency is more important; choose the -3 grade when a design cannot meet timing with -2.
When should I choose XC7K160T-L2FBG676E over XC7K160T-1FBG676I?
Choose the XC7K160T-L2FBG676E when the design needs the higher -2 performance grade while using the E temperature option. The XC7K160T-1FBG676I is a -1 speed-grade device with the I temperature designation, so it offers less performance and a different environmental grade. According to AMD Kintex-7 family ordering information, speed and temperature suffixes define distinct device variants even when the underlying FPGA family and logic density match. Confirm both the electrical grade and environmental requirements before treating either part as a substitution.
What can replace XC7K160T-L2FBG676E?
The closest replacements are Kintex-7 devices using the same 676-ball FBG package, including XC7K160T-3FBG676E, XC7K160T-2FBG676I, XC7K160T-1FBG676I, XC7K160T-2FBG676E, and XC7K160T-1FBG676E. Their suitability depends on speed grade, temperature grade, lifecycle status, and exact pin compatibility. According to the AMD Kintex-7 family data, changing the speed or temperature suffix can alter power and environmental characteristics. Before replacement, compare the complete ordering codes, regenerate the Vivado constraints, and verify power, timing, and the package ball map.
Is XC7K160T-L2FBG676E the same as XC7K160T-2FBG676I?
No. The XC7K160T-L2FBG676E and XC7K160T-2FBG676I both identify a Kintex-7 device in the FBG676 package with the -2 speed grade, but their ordering suffixes differ. The target carries the L2 and E designations, while the alternative carries the 2 and I designations. According to AMD ordering documentation, these suffixes distinguish device configuration and environmental or qualification options. The difference may not require a PCB change, but it is not electrically or environmentally identical unless the ordering table confirms every relevant parameter.
What is the best AMD Kintex-7 equivalent for XC7K160T-L2FBG676E?
The best same-family alternative depends on whether performance or environmental grade is the deciding constraint. XC7K160T-3FBG676E retains the E designation and offers a faster -3 grade, while XC7K160T-2FBG676I retains the -2 grade but uses the I temperature designation. Both are listed with 162,240 logic cells, 11,700 Kb of block RAM, and 400 I/O. No cross-brand drop-in FPGA was established, because device-specific configuration memories, transceiver resources, power rails, and licensing constraints make generic substitution risky.
Where can I buy XC7K160T-L2FBG676E online?
Use the Request a Quote form on this page to request XC7K160T-L2FBG676E availability, lead time, and a current quotation. The request should include the exact MPN, FBG676 package, -2 speed grade, E suffix, target quantity, and assembly or delivery requirements. Because FPGA supply can vary by lot, package, and regional demand, request a confirmed manufacturing code rather than relying on a generic family listing. The form also allows buyers to specify tray or reel handling, programming requirements, traceability, and production-schedule needs.
What is the price of XC7K160T-L2FBG676E?
The current price of XC7K160T-L2FBG676E depends on quantity, procurement schedule, programming, packaging, and market availability. Use the Request a Quote form on this page for a current unit-price quotation and quantity breaks for the exact MPN. Provide the required order quantity and whether the FPGA must be programmed or packaged in a specific shipping format. This avoids comparing the target with a different speed grade, temperature suffix, package, or inventory condition and gives procurement a request that can be matched to the exact orderable configuration.
What is the lead time for XC7K160T-L2FBG676E?
Lead time for XC7K160T-L2FBG676E should be confirmed through the Request a Quote form on this page using the exact MPN and required quantity. FPGA lead time can depend on product life-cycle status, wafer and package allocation, configuration support, and whether custom programming is required. The -2 speed grade and E suffix identify the precise orderable device and should be included in every inquiry. Request a dated quotation and manufacturing schedule so schedule-critical builds do not rely on an unconfirmed generic inventory estimate.
Is XC7K160T-L2FBG676E in stock?
Current XC7K160T-L2FBG676E stock status should be obtained through the Request a Quote form on this page. The form can confirm unopened inventory, factory allocation, and an estimated dispatch date for the requested quantity. Specify whether the device is needed in tray packaging, and include any programming, inspection, or traceability requirements. Because a family-level stock statement does not guarantee availability of the exact -2 speed grade and E suffix, procurement should request confirmation against the complete manufacturer ordering code.
How much power does XC7K160T-L2FBG676E consume?
XC7K160T-L2FBG676E power consumption is configuration-dependent and cannot be represented by one universal value. The -2 Kintex-7 speed grade, selected I/O standards, transceiver activity, logic utilization, clocking, and core voltage all affect consumption. Use the AMD Kintex-7 power estimator and Vivado power analysis with the intended clock, utilization, and I/O assignments. Account separately for static power, dynamic power, and the 676-ball package’s heat-dissipation path when designing power supplies and thermal management.
What tools can program and implement the XC7K160T-L2FBG676E?
AMD Vivado Design Suite is the principal FPGA design environment for the XC7K160T-L2FBG676E, providing device support, constraint handling, synthesis, implementation, timing analysis, programming, and bitstream generation. Use a Vivado release that includes the Kintex-7 device and FBG676 package files corresponding to the intended production status. Engineers should also use the manufacturer’s power estimator and board-level programming or configuration hardware. The exact tool release should be frozen for production because device files, timing models, and bitstream behavior can change between releases.
What PCB considerations apply to the XC7K160T-L2FBG676E FCBGA package?
The FBG676 package requires a substrate or interposer with the exact AMD ball map, controlled escape routing, adequate power and ground distribution, and an assembly process qualified for its pad and solder-mask requirements. Place required decoupling close to the relevant power balls and provide a low-impedance return path for high-speed interfaces. According to the AMD package documentation, power, ground, and user-I/O locations must be assigned from the package-specific files rather than a generic BGA symbol. Thermal vias, copper planes, and mechanical underfill or heat-spreader decisions should follow the assembly process’s requirements.

נתוני עזר הנדסיים עבור XC7K160T-L2FBG676E — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose the XC7K160T-L2FBG676E when a design needs the Kintex-7 162,240-cell device, the FBG676 package, the -2 performance grade, and the E environmental designation. Select XC7K160T-3FBG676E when the implementation cannot meet timing at -2 or requires additional performance margin, while accounting for its potentially higher power consumption. Consider XC7K160T-2FBG676I when the same speed grade and package are needed but the I temperature designation is preferable. XC7K160T-1FBG676I and XC7K160T-1FBG676E are lower-speed choices that may reduce power but can reduce timing margin. Before replacing the target, verify the complete ordering code, package ball map, environmental limits, configuration compatibility, lifecycle status, Vivado timing, and system power budget. No cross-brand drop-in alternative is recommended because FPGA pin assignments, configuration methods, transceiver resources, and tool support are device-specific.

השוואה עם חלופות

פרמטר מוצר זה XC7K160T-3FBG676E XC7K160T-2FBG676I XC7K160T-1FBG676I XC7K160T-2FBG676E XC7K160T-1FBG676E
Package 676-ball flip-chip BGA (FBG676) 676-ball flip-chip BGA (FBG676) 676-ball flip-chip BGA (FBG676) 676-ball flip-chip BGA (FBG676) 676-ball flip-chip BGA (FBG676) 676-ball flip-chip BGA (FBG676)
Brand AMD AMD AMD AMD AMD AMD
Device Family Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7 Kintex-7
Speed Grade -2 -3, one grade faster -2, same grade -1, one grade lower -2, same grade -1, one grade lower
Temperature Designation E E I I E E

מבדילים עיקריים

  • Balanced -2 speed grade for timing margin and power (לעומתXC7K160T-1FBG676I)
  • E temperature designation matches extended-commercial variants (לעומתXC7K160T-2FBG676I)
  • Lower performance demand than the -3 FBG676E option (לעומתXC7K160T-3FBG676E)

הערות תכנון

Design the FBG676 power tree from the package-specific power and ground balls rather than distributing rails by package position alone. Separate the logic core, I/O, auxiliary, and transceiver supplies according to the manufacturer power architecture, and verify whether any rails require sequencing. Place the required bulk and high-frequency decoupling capacitance close to the assigned balls, with short, low-impedance connections and a continuous ground reference. Use Vivado power analysis with realistic clocking, I/O activity, and utilization; validate worst-case voltage, temperature, and process corners before releasing the power supply design.

Thermal design should be based on maximum sustained FPGA activity rather than average laboratory utilization. The -2 grade can consume more power than a lower-speed Kintex-7 option when the same design is active, so identify the dominant contribution from core logic, I/O, memory, or transceiver blocks. Model the PCB, package, thermal vias, heat spreader, and enclosure together, then check the calculated junction temperature against the selected E-grade limits. Provide copper area around the package where the substrate permits, maintain uninterrupted ground planes, and avoid placing heat sources or airflow restrictions directly beneath the BGA.

Use the exact FBG676 ball map and Vivado package file as the authority for every pin assignment. Group high-speed interfaces according to their bank and clock requirements, and keep clock, transceiver, and sensitive control routing away from noisy switching paths where the topology permits. Preserve continuous reference planes beneath escape-routed signals, match length according to interface-level rather than generic FPGA rules, and avoid routing through split planes. The large BGA escape-routing region should be planned as a constraint-driven layout so power, ground, and high-speed pairs can escape without last-minute layer changes.

Do not treat an alternative MPN as interchangeable solely because it uses the FBG676 package. Speed-grade changes can alter timing margin and power, while the I and E suffixes affect environmental requirements. Before substitution, compare the complete AMD ordering code, obtain the matching package file, regenerate constraints, and rerun implementation and static timing analysis. Also verify configuration-memory compatibility, transceiver resources, supported I/O standards, lifecycle status, and assembly requirements. A successful footprint match alone does not establish electrical, thermal, or qualification equivalence.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

Compliance declarations were not identified in the manufacturer or distributor records reviewed. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status from the current AMD product documentation before release.

חיפושים קשורים

xc7k160t 2ffg676i xc7k160t 1ffg676i xc7k160t 1fbg676c xc7k160t 2fbg484i xc7k160t 2fbg676i xc7k160t ffg676 xc7k160t 2fbg676c xc7k160t datasheet xc7k160t 2fbg484c XC7K160T-L2FBG676E datasheet XC7K160T-L2FBG676E pinout XC7K160T-L2FBG676E replacement XC7K160T-L2FBG676E vs XC7K160T-3FBG676E AMD XC7K160T-L2FBG676E XC7K160T-L2FBG676E quote

רכיבים ומונחים קשורים

AMD AMD Xilinx XC7K160T-L2FBG676E XC7K160T-3FBG676E XC7K160T-2FBG676I XC7K160T-1FBG676I XC7K160T-2FBG676E XC7K160T-1FBG676E Kintex-7 field-programmable gate array FPGA programmable logic CPLD 28 nm CMOS logic cells block RAM DSP resources FBG676 flip-chip BGA BGA package family surface-mount semiconductor package Vivado Design Suite MMCM PLL industrial control signal processing high-speed data acquisition
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר